Adding key figures using commands in Web Application Designer?

Hello, all.
I have a query the contains several key figures. From that query, I created a query view in which only one of the key figures is displayed. I'm using this query view for one of the data providers in a web template. In Web Applicaiton Designer, I would like to be able to hide the key figure from the data provider and show a different one. How can I accomplish this using the built-in commands?
I know I can hide all key figures using the CLEAR_SELECTION_STATE command, but I can't figure out how to use a command such as SET_SELECTION_STATE_SIMPLE to show a different key figure. Any help would be great! Thanks.

I've tried that using the GUI to configure the command, but WAD crashes when I try to open the window where I choose the member name. The error says:
"4A6DM1A4LTXPJKA1BA3LD9TTD is not a valid characteristic for InfoProvider MQM_M01."
I also tried entering the commands as you suggested in the XHTML editor, but that resulted in an error when I tried to execute the command.
Maybe I can do what I'm trying to do using some method other than changing key figures. Basically all I want do is change the date range of the data shown using offsets.
The key figures that I'm trying to add and remove are restricted in Query Designer to different date ranges. These date ranges use offsets to set the restriction. For example, one key figure is restricted to display values for only the last 7 days and I'm trying to replace it with a key figure that's restricted to the last 14 days.
If I knew how to set a filter with offsets using commands in WAD, then I'd use that method, instead. Any suggestions would be appreciated.

Similar Messages

Use Map In Web Application Designer

Hi gurus:
when I create map in Web application designer ,it shows the error:
Messages:
Internal error communicating with the IGS (maps)
Map could not be Created
But the map can be shown in Analyser,please help me!
thanks

Hi,
please tell more about your scenario.
Are you using dynamic attributes?
Are all layers visible?
Did you check the query that you are using as Dataprovider?
Is there only one geocharacteristic in the row?
Which infoobjects are you using and which shapefiles?
Best regards
Andreas

How to use Distribute on Web Application Designer 3.x

guys i am trying to Distribute a report on the portal , which has already got its selection parameters, instead of bookmarking it , i want to distribute it, what actions i need to distribute it, i tried it few times but it doesnt work.
" right click on the template click distribute and follow steps, when i schedule it, i dont receive any e-mail or anything?
any thing i have to do before i am able to distribute the web template?

Hi Stefan,
Thanks for your early response.
As you suggested i have added the image to MIME Repository successfully.
Now i have to add the new icon to exsisting template.
Stefan my problem here is
I have to add new icon but i donot need to change the icon.
you are giving the procedure how to change the exsisting icon but my problem is i have add new icon with out replacing any one exsisting in the template.
Thanks in Advance
Pedamarla

To use Web Application Designer release 2004s do we need to have portals???

Hi
I would like some clarity regarding whther we need a portal or not.
If you use Web Application Designer (SAP BW 3.x) it works fine, you can create reports and then it shows in SAP Easy Access under favourites. Executes fine, no portal is used.
Now when I want to use the new Web Application Designer I can not execute the reports. Gives me error
"Java communication error: RFC destination NOT_CONFIGURED does not exist", the window it appears in has a text saying it can't conect to the portal. Then notes that I look at regarding this seems that the connection between SAP BW and Portal must be set up.
So can please someone tell me whether you need the portal to use the new Web Application Designer release 2004s
Thanks in advance

YOu neeed BI Java configured
If you do not use any new BEx Web functions, do you have to install the usage types BI Java and EP?
answer -SAP EP 6.0 Portals could be integrated into a federated portal system landscape using URL iViews.
For more insights - FAQ
Pls read carefuly should answer all your current and future questions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

Chart problems in Web-Application Designer

Hello,
I am trying to use CHART in Web Application Designer.
But whatever TYPE I select in that (pie/stack/..),
It shows the report with default chart type..
Then after one /two trials, I have run time error. & Web application Designer crashes. In preview of that chart on template, it shows the chart type I have selected.
What am I missing in my steps. Or is some library missing..
Thanks for you suggestion.
Is very urgent & as I need to show report tomorrow.
Regards,
Santosh

Hi Santosh,
Defining the Width and Height of the Entire Chart
in the Properties
Enter the desired values in fields Width and Height of the window in which you are editing the chart. The entries should be in pixels.
Choose Apply.
The size of the entire chart is changed according to your specifications.
Changing the Size of the Entire Chart with the Mouse
Point to the border of the preview window with the mouse.
The cursor becomes a double arrow.
Click on the border and pull the preview window to the required size.
The size of the entire chart is changed when you let go of the mouse key.
Changing the Size of the Plot Area or the Legend with the Mouse
Click on the element whose size you want to change (plot area or legend).
The element is enclosed in a move handle.
Point to one of the move handles with the mouse.
The cursor becomes a double arrow.
If the cursor does not become a double arrow, you might not have selected the right element, for example the chart area instead of the plot area. In this case click again on the element whose size you want to change.
Click on the move handle and keep the mouse key pressed.
The cursor becomes a cross.
Pull the element to the desired size.
The size of the element is changed when you let go of the mouse key.
Avoid stretching the plot area over the whole area of the chart. The outermost border of the plot area disappears from the visible area in this case and cannot be clicked on again. You cannot change the size of the plot area. If you made the plot area too large by accident, you can undo it with the menu option Undo in the context menu. You can reset the plot area to its original size with Reset, but you will lose all the changes you made to the chart.

It is simple issue D't worry..And one morething is Check the Specific Properties of the Template in Design of the web template.
Thanks
Bhima Chandra Sekhar

Web application Designer - New UI Elements

Folks,
I am working with BI 7.0 using the new Web application designer to build a dashboard. I would like to add a progress bar to the dashboard, but this UI element has not been included in the WAD.
Is there any way to create this UI element and insert it into my template either with javascipt, jsp or any web technology?
Any comments you can offer would be very much appreciated.
Thanks,
Bill

Hi If you are using SPS14, you can use the new Customer exit item, which enables you to add custom HTML or Jscript into the Webtemplate at runtime dynamically.
I use this functionality to add Flash Graphs and PPT export to the template.
best regards,
kai

BEX Web application Designer displaying Java Communication Error

Hi,
When we are using the BEX Web application Designer to create new web template, it throws error saying "Java Communication Error: An UnKnown Error Occured During Portal Communication."
====================================================
Diagnosis
An error occurred during communication with the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
====================================================
Kindly help to resolve this issue.
Regards, Krish

Hi,
Please check below document for connection between BI and Portal
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d082fe32-5037-2b10-3288-fd009f695c74
You might be doing something wrong in any of these steps.
Regards,
Kams

Prevent values being passed using Link Item on Web Application Designer

Hello all,
I have a question regarding 7.0 Web Application Designer. I am using the web item Link Item and using the command OPEN_TEMPLATE_DIALOG to open a new WAD Template BUT I do not want to pass the values from the original WAD template to the new one. Is there a way to restrict passing any values to the new template? Am I using the correct command OPEN_TEMPLATE_DIALOG?
To better describe what is happening, my characteristics and key figures are being passed from my original WAD template to my new WAD template when using the OPEN_TEMPLATE_DIALOG. I do not the values to be passed, only to open up the new WAD Template with its own reports.
Thank you.

Sorry maybe I mistated the problem. I do not have an issue with the variable screen when transitioning to the second WAD template screen, I have a problem due to the values from the first WAD template being passed to the second WAD template.
My first WAD template using the Link Item is only for the ability to click on the text to open up a second WAD template which I do not want the values to be passed from the First template.
I hope this clears up the confusion.
Thanks

Were can we add the commands in the web application designer in bi 7?

Hi all,
Can anyone let me know what are all the web items in which i can add commands in web appln designer in bi 7.
can anyone provide me some sample examples for adding commands in the WAD in bi 7,0
Thanks
Pooja

Hi Pooja,
Use this link to have better idea...
http://csc-studentweb.lr.edu/swp/Berg/articles/NW2008_BI_tool_guide_v7.ppt#322,28,Command Wizard and JavaScript
Thanks,
Ajay

License Keys for J2EE-Engine_ORA SAP Web Application Server.

Hi Experts
I have installed SAP Net Weaver 04 support release 1 > oracle JAVA System. I dont have ABAP system on same Hardware so I cant used SLICENSE GUI transaction code, how I generate hardware key, I am performing installation on Windows 2003 server.
Now I want to add License Keys for J2EE-Engine_ORA SAP Web Application Server. So please give me producer for how to add license key.
Regards,
Rahul

Hi
Go to Visual Administrator in the following path:
<Your Server> --> Services --> Licensing Adapter to get the Hardware key , SID etc . Ten apply license in
https://service.sap.com/licensekeys
Once you get the license from SAP, do the following
->Download the license file to a local disk
--> Start the Visual Administrator Server --> Services --> Licensing Adapter
--> Use the Install License From File button to upload the file
--> Select the file with the downloaded license key
--> Choose Open to continue
After installation restart J2EE engine
Thanks
Prince Jose

Using command tab for application switcher no long cycles through all apps

Using command tab for application switcher use to work as it always has before Lion, and did in Lion for a few days. Now it stops at the last app. It always use to keep cycling through through all the apps. I figure I did something, but cannot figure out what. I have tried old tricks like force quitting dock using Activity Monitor, but that didnt work. Tried restarting, repairing permissions, and a new user account. I will great appreciate anyones help with this.
Thanks,
Mark C.

I was going to post my experience about application switcher as well, but i have the opposite problem: in SL it never worked, but now in Lion it does. Since I upgraded by installing over Lion, I'm assuming there must be a setting somewhere for this behavior. There is a place for setting keyboard keystrokes, looking there may help.

Security for creating web templates using web application designer

I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
Any help would be greatly appreciated.
Jeff Ehritt
925 827-6012
ChevronTexaco

Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
Thanks,
Jeff Ehritt
ERP COE SAP BW Security

What GUI to use web application designer in BI 7.0 without support package

I use BI in my ECC 6.0 system.
I use tried both GUI 7.1 and GUI 6.40 to logon web application designer.
But system display the message please logon to a Netweaver BI 7.x system. System A11 does not have a mimumium version required 7007.
My system seems to be 7000, so what GUI is suitable to use for WAD?
Thanks
Giang

Hi,
It could be problem with either Support package which you are using for BI or Front end patch which you need to install for GUI.
please check with minimal installations and let me know with current support package and FEP you are using.
Regards
Suresh

Restricting key figure using 0infoprovider

Hi Experts
My query is buily on a multiprovider (which is built on 10 cubes)
I need to restrict key figures in the query so that every KF will search a particular cube, instead of searching all the cubes. because of this query performance is very poor.
We use 10 RKF in that query. I know that we can restrict them it using 0infoprovider.
Now my question - Do we have to restrict the original key figure using which we created RKF or can i just restrict RKF.
Another question - If we have restrict RKF, then in global window (this will affect all the query using tht rKF)or at local level.
Thanks
BIT

Hi,
Now my question - Do we have to restrict the original key figure using which we created RKF or can i just restrict RKF.
You can simply add the restriction in the RKF.
Another question - If we have restrict RKF, then in global window (this will affect all the query using tht rKF)or at local level
If RKF is getting used in multiple queries and you want it to restrict to same inforprovider for all the queries then you can restrict it at global level. But if you have different restrictions for different queries then you will have to create local RKF's and then use them in the individual queries.
Regards,
Durgesh.

Restrict Key Figure using a Characteristic InfoObject which is Compounded

Hello Friends,
I have a scenario where I need to restrict the a Key Figure using a Characteristic which is a Compounded Info Object.
The Compounding is done on Info Object Payment Method and Country is the superior Info Object. The Values in the Compounded Info Object are like "country/payment method" " AE/J , AU/J , BD/3".
In the Query I would like to restrict the data for a Key Figure using the above values. But when I try to create a Restricted Key Figure it does not take the compounded value instead it would take the value of Payment method like J or 3.
But in the Single values for Payment Method it shows the complete compounded value "AE/J , AU/J", and when I select the values it selects only the payment method value.
Any suggestions on how to achieve a restriction on the compounded value.

Hi Naveen,
Kindly try filtering the Key Figure with both Payment Method and Country in the restricted key figure that you are creating.
For example, lets assume you want a restricted key figure, that is filtered with the value - AE/J.
You are not able to get that directly by filtering it only with Payment Method - J.
So filter it with Payment Method - J and Country - AE.
Now save the restricted key figure and try executing it.
Hope it Helps.
Warm Regards
Preethi R

Adding key figures using commands in Web Application Designer?

Similar Messages

Maybe you are looking for