Adding keynotes and evening events to brainshare scheduler?

Just exported my schedule to get it into my calendar and found there are no
entries for keynotes and evening events to select from. Would make sense to
show them as well, I think. Could they be added for informational purposes,
maybe?

In article <UiR_v.5526$[email protected] m>,
Kgroneman wrote:
> since there is nothing in
> those timeslots that would conflict with the keynotes and evening
> events, I doubt it creates a scheduling problem.
But where was I supposed to go? Need details in our handbrains to
point us in the right direction.
We are doing our scheduling thinking upfront and then level it to our
able electronic assistants to guide us, after all we do call them
smart.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php?userid=75037
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Similar Messages

IPhone 4 won't slide to unlock . I tried everything possible and even got my phone replaced fora new one costing me 10,282 Rupees . The new phone is again having the same problem even without adding any apps or taking data backup

iPhone 4 won't slide to unlock . I tried everything possible and even got my phone replaced fora new one costing me 10,282 Rupees . The new phone is again having the same problem even without adding any apps or taking data backup

Yeah, first my thought was also that... that's why I've gone to Apple and they already switched the phone twice!!!
Last time was yesterday... I posted this here because I came from Apple and with a new iPhone 5, although I didn't restore anything from iCloud, I hadn't even logged in to iCloud / AppStore, and without any event on the lockscreen my iPhone 5 was already "locked" on the unlock screen... after a mere 45m after I used it without a single App!! Just a couple of SMS / 1 or 2 calls... I'm going to Apple again on monday, but tried to post here to see if this has happened before to anyone with 3 new iPhones!!!

I have some presentation on the ipad 2 which went missing even though it is still on the icloud. how do i load them onto the ipad again? I have already updated the keynote and am currently on ios8

i have some presentation on the ipad 2 which went missing even though it is still on the icloud. how do i load them onto the ipad again? I have already updated the keynote and am currently on ios8

Here you go:
You should be able to hit the "Agree" button, if you are on an iPhone right now. On a Mac, you should just left click the button where it said "Accept". I hope this helped.
To quit the app store, simply hit these keys:
Than, you should come up with this window:
Select the app store with:
a) The up and down arrow keys
b) Your cursor
Than hit the 'Enter' button twice. This should close the app store. The force quit window is also accesible through the apple logo in the top left corner of the screen. It should say:
Force Quit...

Capture All Mouse and Keyboard events even if java window NOT in FOCUS

Hi All,
Is this possible to capture all mouse and keyboard events even if java window is not in focus or is minimized. This java program should cature each and every event from the user once the program is started. Any help in this regard is appreciated!
Thanks&Regards
Sam

I don't think you can. (without JNI)

I created my first movie using one long video (all photos) clip created in Keynote and imported to Imovie. I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original but retain the audio. Can I?

I created my first movie using one long video (a montage of photos) clip created in Keynote and imported to Imovie. I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original video, but retain the audio. Can I? And if so, how. I cant seem to
find the info anywhere in help.

I would suggest that you go to iMovie/Preferences and make sure that Advanced Tools are enabled.
Then, you can drag your new video clip on top of your old clip and a popup menu should appear. Choose REPLACE.

Why don't my photos appear as they do in iPhoto on my Apple Computer. Even though I specify to sync all Events, Faces, etc. the iPad 2 is missing Faces categories and the Events are in a different order.

Why don't my photos appear as they do in iPhoto on my Apple Computer. Even though I specify to sync all Events, Faces, etc. the iPad 2 is missing Faces categories and the Events are in a different order.

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

Music I already have on my computer will not pull up in itunes. I dragged the files, copied the files, and even tried adding the files but nothing works. The songs play on any other program except for itunes. What do I do??

Music I already have on my computer will not pull up in itunes. I dragged the files, copied the files, and even tried adding the files but nothing works. The songs play on any other program except for itunes. What do I do??

OMG......THANK YOU THANK YOU......I been reading articles after articles and nothing was working......tryed the Crtl+S and there it was. I can not thank you enough......I appricate it Can not believe it was that simple. I am one happy person again.....

Using Keynote and iPhoto slideshow together

Computer: 12" Powerbook G4, 1.5ghz
Display: 23" Apple Cinema Display (1920x1200)
Software: OSX 10.4.9, Keynote 2, iPhoto 6
Hi everyone! Above are the specs for the project I'm working on and here's the problem I'm having:
I am trying to create a makeshift kiosk display for an upcoming event using slides in Keynote and a picture slideshow in iPhoto. I'm planning on running it off my Powerbook to my 23" Cinema Display.
I'm using Keynote for the presentation content because of the motion effects (transitions, build-ins, etc.) and iPhoto for the image slideshow because of the Ken Burns effect (which I don't believe Keynote has). Both look great running seperately, however when this is being displayed at the show, I'll need both to run back to back automatically, without having to manually switch back and forth between applications.
I have both the Keynote presentation and the iPhoto slideshow displaying at 1920x1200. I've tried exporting the iPhoto slideshow to Quicktime, but it won't export any higher than 640x480. Does anyone have any ideas on how I can make this work? I won't be able to operate the computer when this is running, so I really need to find a way to make everything run seamlessly while keeping the high resolution of the 1920x1200 monitor.
Any advice would be GREATLY appreciated!
Thanks,
-Steve
PB 12" 1.5ghz Mac OS X (10.4.9)

iMovie is a DV editing app and the final results would still make a 640X480 file.
I would change a few things to make everything work together:
First is the display resolution. You want the 23 inches to be used so just reduce the display preferences to try and match your QuickTime file. 800X600 sounds about right but larger will still work as H.264 Video scales up in size very nicely.
This would force you to "reduce" the dimensions of the Keynote file but that shouldn't be much of an issue.
QuickTime Pro could also be used to "change" the dimensions of the 640X480 file. Again, H.264 scales up in size and would look pretty good at even double size.
The goal is to have them both at the same dimension and then match the monitor resolution.
Easier to change the display than the files.

BrainShare Scheduler is now live.

Hello BrainShare Attendees,
The technical sessions at BrainShare are what set it apart from all other conferences. We spend many long hours reviewing the proposals and creating a curriculum that will exceed your expectations. With around 166 sessions to choose from, we are confident that you'll be able to get the technical training and information you need.
The BrainShare Scheduler is now live. You can now assure yourself space in the sessions you want. Hopefully you've already added sessions to your "My Interests" list. You can now move those sessions, or add other sessions, to your schedule for BrainShare 2013.
How to Schedule a Session
You can add sessions to your schedule automatically or manually.
To schedule sessions automatically:
In the Session Catalog, search for sessions you want to attend and add them to your "My Interests" list, if you have not done so already.
In your "My Interests" list, assign a priority to each session.
Use the Auto Scheduler to add the sessions to your schedule. The Auto Scheduler adds sessions automatically based on your prioritized "My Interests" list.
View "My Schedule" and make changes if needed.
To schedule sessions manually:
Go to "My Schedule" and add sessions directly on the schedule.
We encourage you to register as soon as possible as popular sessions fill up quickly.
We are looking forward to seeing you in Salt Lake.
The BrainShare Team

Please accept our apologies. We will have the Scheduler running on
Wednesday, January 3rd. We had to pull it down to make a few necessary
changes. Thanks for your patience.
ahenrie
ahenrie's Profile: http://forums.suse.com/member.php?userid=3689
View this thread: http://forums.suse.com/showthread.php?t=2203

TS3988 My wife bought an iPad Air and synced contact from our PC (Outlook), now all our contacts in Outlook have gone and we have to go to iCloud to get them, and even then they are a bit jumbled. How do I get my data back onto my PC?

My wife bought an iPad Air and synced contact from our PC (Outlook), now all our contacts in Outlook have gone and we have to go to iCloud to get them, and even then they are a bit jumbled. How do I get my data back onto my PC?

If you can see the iCloud contacts in Outlook, you can copy them back to your PC by selecting all the contacts (click one, then press Control-A), then drag and drop the selected contacts to Contacts under My Contacts on the left sidebar of Outlook.
If you want to copy your calendar back to Outlook, select your iCloud calendar on the left sidebar of Outlook, switch to the list view (select View from the ribbon, then click Change View>List), select your events (click on a single event, then press Control-A), then control drag and drop them to Calendar under My Calendars on the left sidebar.
Then you can sign out of iCloud on the iCloud control panel and your local copies will still be there. If you want to add your iCloud email account back to iCloud, you can do this with these settings: http://support.apple.com/kb/HT4864.

Adding loops and loops format question

Hi, i've been facing difficulties adding loops into my GB. My problem is: "Loops do not appear in my loop browser nor the loop list from the silver loop bar above the browser".
Yes, forgive me for asking this repeated question but after checking the help tutorial, my personal GB guide books, and even HangTime's FAQ, sadly, i still dont find any answers.
Generally, the procedure is pretty simple from all the sources i've read. Simply drag the folder or loops into the browser and thats DONE right? I did exactly what it said but sigh...maybe there's something wrong with my Macbook?
For your information, all the loops that i've been adding are loops from CDs coupled with FutureMusic and ComputerMusic magazines, so i believe the sources are pretty reliable i hope.
As i was struggling to add the loops, this msg popped up for the first time; "Loops that are not in Apple format will not be added into GB"
So, is the loop format the main cause of my problem?
if yes, is there any way to convert the format? what is the procedure?
ps: My current status is, some loops i added are in my browser while some dont although they exist in User/Library/Audio/AppleLoops/UserLoops.
Thank you in advance.
Peace

So, is the loop format the main cause of my problem?
likely.
if yes, is there any way to convert the format? what is the procedure?
apple's loop utility:
http://www.bulletsandbones.com/GB/GBFAQ.html#looputility
also note:
http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

How can I make Siri distinguish between calendar appointments (busy) and calendar events (free)?

When I ask Siri "How does my day look tomorrow?" she tells me every appointment (busy) and task (free) I have scheduled. I'm trying to find a way to let her know that I'm only interested in seeing what appointments (busy) I have that day.
Has anyone found a way to do this? I'm using iCloud calendars on all my devices.
I've already used iCloud calendars to designate each individual event as either "free" or "busy," but she continues to display all calendar events when I ask for an overview of my day. I've tried to do this from my iPhone, Macbook, and iCloud website.
Moving my tasks to my "Reminders" app won't help, because I need to be able to schedule time to work on specific tasks and also put important deadlines into my calendar. At the same time, when I ask Siri, "How does my day look," I am only interested in knowing what appointments I have that day.
I've also tried asking specifically "What meetings do I have in my [work/personal/family etc. calendar]" but that doesn't work either.
I've also tried asking "Can you show me when I'm busy today" and "Can you show me todays's appointments."
It may be that Siri doesn't have this capability yet, but it would be nice to know if its in the works or if it exists.

When I ask Siri "How does my day look tomorrow?" she tells me every appointment (busy) and task (free) I have scheduled. I'm trying to find a way to let her know that I'm only interested in seeing what appointments (busy) I have that day.
Has anyone found a way to do this? I'm using iCloud calendars on all my devices.
I've already used iCloud calendars to designate each individual event as either "free" or "busy," but she continues to display all calendar events when I ask for an overview of my day. I've tried to do this from my iPhone, Macbook, and iCloud website.
Moving my tasks to my "Reminders" app won't help, because I need to be able to schedule time to work on specific tasks and also put important deadlines into my calendar. At the same time, when I ask Siri, "How does my day look," I am only interested in knowing what appointments I have that day.
I've also tried asking specifically "What meetings do I have in my [work/personal/family etc. calendar]" but that doesn't work either.
I've also tried asking "Can you show me when I'm busy today" and "Can you show me todays's appointments."
It may be that Siri doesn't have this capability yet, but it would be nice to know if its in the works or if it exists.

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Keynote (and other iWork apps) not saving properly!

Hi all
I have had some strange problems over the last few weeks where I get messages telling me that iWork (usually Numbers) cannot save the files as 'something else' is using the file. So I click 'save anyway' and I get strange files in folders, ie folder and file name is the original name plus some gooblygook.
I have got round this by deleting the 'extras' and carrying on. But now I am preparing a major presentation in Keynote and suddenly it is not saving graphics some of the time!
For example I was working on a slide - and suddenly got a message that 'some problems occured' -
Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
I have been working with this presentation for some time and have never encountered any problems - passing between my laptop and my iPad to review and modify (mainly viewing on the iPad and editing on the MacBook).
Any ideas what is happening? I have a major presentation to give in just over a week and I don't want to use PowerPoint!
Thanks
Ian

I've been having some success NOT using any files that have previous images or audio in them, starting from a base template and then adding audio and video and photos that are already on my hard drive, not previous Keynote files. Today I needed five slides that were part of another deck and, you guessed it, they were corrupted (or missing) when I reopened the file, only the thumbnails remaining.
I closed the original Keynote file, placed a zip extension, then control- clicked to see the contents. The images were missing from the package. I then replaced the extension with .key and reopened in Keynote. The audio file had been there but not the images or the drawing, which I then searched for.
Yes, delete the weird file backups and make a backup of the original in the finder. Then lock it! (You're using Mountain Lion?)
I have a huge presentation tomorrow. I have five backups, including on a thumb drive.
How much longer Apple?

Adding keynotes and evening events to brainshare scheduler?

Similar Messages

Maybe you are looking for