Adding lastline in the output file
hi
i have attached my coding with this just i need to add a word in before of last line in output file
please help out....
import java.io.*;
import java.io.FileReader;
class Filenew
public static void main(String args[]) throws IOException
FileReader in = new FileReader("e:/rag.txt");
FileWriter out= new FileWriter("e:/out2.txt");
BufferedReader br=new BufferedReader(in);
String s;
while((s=br.readLine())!=null)
out.write(s);
out.close();
in.close();
}regards
Raghavan
hi,
From your previous post
http://forum.java.sun.com/thread.jspa?threadID=5226088you are trying to write in a file and add some text before last line in that file,
if yes
here is the modified code,
try to even better;
file.java
import java.io.*;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Vector;
import java.util.Enumeration;
public class file
public static void main(String args[]) throws IOException
InputStream in = new FileInputStream("out2.txt");
FileWriter fo=new FileWriter("out3.txt");
Vector v = new Vector ();
int c,pos,pos1;
String s=new String();
StringBuffer sb = new StringBuffer();
while((c=in.read())!=-1)
sb.insert(0,(char)c);
sb = sb.reverse();
s = sb.toString();
pos = s.indexOf("verify scan_test",0);
s=s.substring(pos+1);
int linecount = 0;
while (pos >= 0) {
s = s.substring(pos + 1);
pos = s.indexOf("_cpdp_=", pos);
pos = s.indexOf("=", pos);
pos1 = s.indexOf(';', pos);
v.add(s.substring(pos + 1, pos1));
++linecount;
Enumeration e = v.elements ();
String str = "";
while ( e.hasMoreElements())
{ --linecount;
if( linecount == 0)
str = "what code you to add here \n\r" + e.nextElement ();
else
str = e.nextElement().toString();
fo.write( str +"\n\r" );
fo.close();
out2.txt
verify scan_test {
Abb {* verify:0 Value:0 lifecycle:0 *}
W tset_tp;
S { _cpdp_=YYYY10YYYYYYYYYYYYYYYYYYY;
Abb {* Begin loop test *}
S { _cpdp_=YYYY10YYYYYYYYYYYYYYYYYYY;
S { _cpdp_=YYYY110YY1YYYYYYYYYYYYYYY;
S { _cpdp_=YYYY110YY1YYYYYYYYYYYYYYY;
S { _cpdp_=YYYY111YY1YYYYYYYYYYYYYYY;
}i hope it will give you a clear cut idea
Similar Messages
-
Header Name in the output file using content conversion
Dear All,
I want to have a text file with a header in the output. I have given the following values for content conversion:
RecordSet structure = Record,Row
Record.fieldSeparator='nl'
Row.endSeparator='nl'
Row.fieldSeparator=','
Row.addHeaderLine=1
but still I am not getting header in the output file. Please tell me where I am making a mistake in getting the header.
Reg,
NJhi chirag,
thnx for replying.
i m getting the required output file without any error but i m not getting header. i hve added "addHeaderLine" parameter in content conversion but still i m not getting header in the output file.
reg,
nj -
How to get the Output File Name as One of the Field Value From Payload
Hi All,
I want to get the Output file name as one of the Field value from payload.
Example:
Source XML
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_TEST xmlns:ns0="http://sample.com">
- <Header>
<NAME>Bopanna</NAME>
</Header>
</ns0:MT_TEST>
I want to get the Output file name as " Bopanna.xml"
Please suggest me on this.
Regards
BopannaHi,
There are couple of links already available for this. Just for info see the below details,
The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
// Description: Function to create dynamic Filename
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
With this udf map it with the MessageType as
(File Name field from Payload) > DynamicFileConfiguration>MTReceiver
Thanks
Swarup -
Why is the output file jerky ?
Hi there,
I have AE CS5 on my Mac. My system is 27" iMac core i5 with 12 GB RAM DDR3 1333 MHz with quad core.
I rendered a 40 seconds clip with an earth spinning.
I output it to mov format in 1920 x 1080.
When I did a RAM preview, it was fine & the earth was spinning smoothly.
But the output file (in mov) - (I did thru Composition > Make movie) when I play using QuickTime player is jerky at 20th Sec to 29th sec.
I then import this mov file into Final Cut, it look stuck in the Viewer but was perfect on the Canvas.
When I render in Final Cut, the output file as mov and use the same Quick Time player to play it & it is perfect.
Can I know what is the reason that it is not working in Quick Time the first time when it was fresh out from AE ?
Thank you.
CheersThe default render settings use Quicktime Animation codec at best quality. These files will not playback smoothly because the data rate is too high for the hard drives to keep up with. The animation codec is a lossless codec designed not designed for playback.
Final Cut uses compressed codecs designed for playback as the default. I'd suggest that you open up the help files (F1) and read the entire section on Rendering and Exporting (link). -
Hey guys,
I have this following problem:
When i export my movie to my desktop from premiere elements 11 it fails and says "Error of export: You are not permitted to create or delete the output file."
This is the first time i had this problem.
I have no ideas to solve this problem ... I don't found it on this page neither in the whole web -.-
I look forward to get requestsS
QuickTime is a requirement for Premiere Elements (any version). Please download and install it so that we can continue this troubleshooting. Among other things, without QuickTime installed, you will not have QuickTime presets in Publish+Share and will not have available to you codecs supplied by that player.
Please right click the Premiere Elements 11 desktop icon and apply Run As Administrator. Please review computer permissions..
In the meanwhile, please reply to all the questions, including
What is the description for your export choice and does it make a difference if your Export Save In location is the desktop or to Video Folder in Documents?
What is a description of your computer resources?
Please consider and supply details need to help us help you.
We want you to succeed.
Thank you.
ATR -
Input file should be deleted only after the output file is successful.
Hi Experts,
Could you pleas solve the below issue.
In a file to file scenario, the input file will be picked from a directory location and after processing output file will be placed in the output directory location specified in the receiver communication channel.
In the sender communication channel for the scenario mentioned above, if the processing mode is given as delete, the input file will be delete as soon as the file was successfully read by the adapter, but this will not ensure that the file processing is complete and the output file is being created.
If we have a scenario in such as way that the input file should be deleted from the input folder only if the complete process is successful and the output is generated. how can we achieve this functionality?.
And one more thing if we got the successful output the output file should be placed in one folder. and the if the output file is having errors it should be placed in other folder.Hi,
In Receiver communication channel I have used the below command in Run Operating System
.And I have kept the processing mode of sender communication channel as test.
cmd.exe: /C "del /Leela/test.xml"
You are running the comman line program configured in the receiver File Adapter,but in command line you mentioned the Sender File Folder , So i guess it's not getting processed.
Try this:
Try to run the command line in the Sender File Adapter Side
"Place this in " --> Run OS Command After Message Processing.
Hope this would work and get in parrallel with u r requirement.
regards
Srini -
IDOC to XML : error in opening the output file in iexplorer
Hi Frnds,
I have a scenario IDoc to xml where in Im getting some non ascii values in the idoc for which I used ISO-8859-1 encoding technique but still the conversion is not done. Iam unable to opend the output file in internet explorer giving the follwoing error as :
An invalid character was found in text content. Error processing resource
Please help me how to overcome this issue.
Thanks in advance,Hi,
As i posted previously in xi UTF-8 is the default encoding if message protocal is FILE.
And UTF-8 encoding support unicodes..
Can reconfigure your receiver file adapter with file type as Binary and check once again.
go through http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
refer File Type
now i check with a japanese double byte character and i can open in iexplorer.
regards,
pradeep A. -
How to get required tags and name spaces in the output File?
Hello,
I am doing IDOC to File sceanrio and I am able to get the file but the problem is that I am unable to get the required tag names. Out put file is having ns0 ns1 and so on..
Eg:
ns2:MaterialDefinitionProperty><ns2:MaterialDefinitionProperty><ns2:ID>CU_NET_WEIGHT</ns2:ID></ns2:MaterialDefinitionProperty><ns2:MaterialDefinitionProperty><ns2:ID>EAN_SKU</ns2:ID></ns2:MaterialDefinitionProperty><ns2:MaterialDefinitionProperty><ns2:ID>CUPerCase</ns2:ID>
and so on..
Source structure is IDOC
Target structure is External Defination imported with references.
How can I get the output file with the exact namespaces and tags as imported through External Definations.
Thanks in Advace.HI! Rajeev,
I have gone through this forum and we having 100% same to same requirement here in my project.
We want this at the top of the Output Payload..
<?xml version="1.0" encoding="UTF-8" ?>
- <SyncMaterialDefinition xmlns="http://www.siemens.com/ad/mes/b2mt-1.0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:bml="http://www.wbf.org/xml/b2mml-v02" xmlns:sit="http://www.siemens.com/ad/mes/b2mml-v02-SITExt-1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:oag="http://www.openapplications.org/oagis">
- <oag:ApplicationArea>
and also isome part of payload nstead of ns0: and ns1:
we want it as below for some part of same output payload
<oag:ApplicationArea>
- <oag:Sender>
<oag:LogicalId>SAP</oag:LogicalId>
<oag:Component>PMConnector</oag:Component>
<oag:ReferenceId />
<oag:Confirmation>Always</oag:Confirmation>
</oag:Sender>
<oag:CreationDateTime>2009-06-14T22:23:29.42Z</oag:CreationDateTime>
</bml:MaterialDefinitionProperty>
- <bml:MaterialDefinitionProperty>
<bml:ID>XXXXXXX</bml:ID>
- <bml:Value>
<bml:ValueString>0.0</bml:ValueString>
<bml:DataType>string</bml:DataType>
<bml:UnitOfMeasure>n/a</bml:UnitOfMeasure>
<bml:Any />
*</bml:*Value>
Check the above code how we want but we are getting in normal way .
Could you please review this and guide me in detailed way how to do in a step by step manner if possible by taking my above payload condition.
Regards:
Amar Srinivas Eli -
Append a file with date and name in the output file
I am running a script which produce an output in excel file, I would like the server name and the date in the output file, Both the servername and date has declared at the beginning of the script as
$server = test1
$date = Get-Date -uformat %Y-%m-%d
I am able to append either server or date but not both. Could you please help me out on this.
I would like the output file as '
server_report_date.xlsI got this working by
"C:\Aravind\Scripts\$server-"+"Report-" +"$Date"+".xls"
Thanks!! -
Modify the output file created by F110
hi everybody
I have to modify the output file (in text format) created by tcode F110.
I have looked in the program rffous_t but could not see where I have to actually change the layout of the display of the fields
can anybody help me out in this issue?
thanks a lot for your help
premaHi vinraaj
thanks a lot for the information
One more question, if i have to modify the formats of the file, do i have to modify the event module for payment medium formats
theres an event module FI_PAYMEDIUM_ACH_20, I have to change the codes, how do i proceed?
do i make a copy of the event module and then modify the codes or there is other ways to do it
thanks a lot for your help -
Getting junk data in the output file in UNIX server due to UNICODE error.
Hi All,
I am working on an Upgradation project from 4.7 to mySAP ERP 2005.
IN 4.7 we are using
OPEN DATASET lv_filename FOR OUTPUT IN BINARY MODE. and getting the file as required.
In ECC 6.0 for the same OPEN DATASET statement ,the output file in unix server has the junk data having the characters like #<##d9{y#+G9###T>j(##^# #K## #q### #####.
Pls help me in this issue to proceed further .
Thanks,
Chakradhar.Hi Markus,
Below are the files data in both environments.
In ECC 6.0
001B2274001802007051 0 20070519CTLMEA RPTIME00043900 #
###9##;c_5####Tj#y#.##'###u###<#<##d9{y#+##G9###T>j(###^###K####q##########C##dA4####ձ###x##
R[#!#J##ڢw###u#-C#'Qho#箐}j##w%##/#'ZhW##s###nи#ڻ>-J#####Ж#tP}##Hu#}Q7###Sh_###C4<3nqk##i l#
####{############Qns###;####p##{si##y##@##ϰ0####C###,###2ύ#j̾########Q#f####;)k>lO#5#n###ܼ#
####M##S##IM#z0#o##ԭ####!#V#9###ں#?s##[#####V&#˴s#��[#l#s##뷢:#Զ{Ȥ��M-##v@#########v#߲###s##
9Q##!#d#####`#############Lc####J#######%?######E#HV3#(#N####Wl####}S#O######zA[##m####u/7#T
##2#s##Q#umF]##Z###}##݂###a######z1#`#####됞-###Q#o#####Q###x#######7Z[##?#V#e##nI####O1=u[#
##p##Kj#####]#####/5#20{####Ӝ##x##A#?###xa##/<^#Rj䅥#######xI#+j#%###$##$######p=##V#Ԋ
#######k#K##yI#yI#!/)#y#z##-y######"/#eڵ##/############*###"/_##-##+##/#y9#####5#9/#yI#A#
###################J/yih=####u4i#K##t####ܞ######=##AX###J##z#####KC믔## /###G{#K#####
In 4.7
001B2274001802007051 0 20070519CTLMEA RPTIME00043900
ãÔ?®zåÖ#Iï-_Î-ør7##*Ódöã ²äÐÁSjòä`ëÏ©"yÿï¾E#[µºEW#g#2éu##a±¸u~#ZäTéR¯F&o#C·¼åÈÝÁ%½ß´y6+##¿
íE#z!#â#ùG#>{#éJæ##jÅSM<±òxwÆüI¾jâ#µ#ù
íQ ÕÈ###dÝ#/«#ycãA¼#ø#7#¿#¼#íxãý#y«#o#â¡ùéËÖ_C¼½À4ðÀó#Ð8?qÊ#O½Î¿_##b#xjÛÓ#OÜ#×gÌ#×ós##
í¡ùh¿~ëÊÓü#ò#'¡#Á#â©#<áoú#'Ô®ü#»L»þ#y)hà#ç#Z[¡#'®Uy1?YC<Ýú#iÇÇ###Íç'Ô#§#Ù#O§#f<###B{#§##ñ
#0H}¬#^##6¨7V¨7VÚX#M9&#A#øG º'õxOù§ø #W¨Å+Ðb#ÉÇ7#SôRXß\u00A7à#wE"#mê#óÀd# ¼##gn###:ô#E<#######ú
ûJ¦H}#·¦Y½â>ºbò#xSSÿÿÕ«óG#ï#6²f´Ú¾fyqèhJÖçCOr´#Ý#S?##KËÄ×mâë¶x)º×ªh2Åw8&í####7 `Ùo#ö»#òöw$
½##Gê#ì#»#La)ì##Ý÷#{7í´éã»##ãî]¾[##{O#¾C##£¶G#û¼Eû#dL#ª:#PÉEÉ>Ó##ª:G#éaR^·BEµÏ+¹###y#N##ȱ
DÕ##5#"9Ní>#íFo##kp#ÂðÆè5¿ð½F®¯M##þð1#îi##Z #Z #Z#ô-¾#§èH»û¹ö9é#Ôä#001B2274001802007051
èÁ##<(#ÿ#¢²ÿ#è#éc#z¾vçÌá#¹#ý#x%ìÜ#çÌ##ùÍÙ#¹{ǯepmâí#¸Ö##¸=ÝÙ½¹uë·,ù#þ¼øl###£åg#,##-`q#ÿøæï
viÁ#]3#.O#þÊöèR##=##L#LÊk###¤à##ó#'V052 øé]+####ã!ÁC#s#q###åLj##Á¯Æ4#.àíT#¸Þ¹µ·¶É)ç#Ïå#<#/ð
Thanks,
Chakradhar. -
The output file for your concurrent request is not initialized
Application: Application Object Library(FND)
Component Type: SERVICE_INSTANCE
Component Name: Standard Manager(STANDARD)
/*The output file for your concurrent request is not initialized.
Cause: Your concurrent program execution was not preceded by calls to standard
Application Object Library routines to initialize concurrent processing. FDPFOP
received a return code of failure.
Action: Change your concurrent program to initialize files by calling standard
Application Object Library routines. */
I got the mail with the above message from System ( Oracle Applicaitons Release 12.1.1)
I have checked the following metalink document
The Output File For Your Concurrent Request is Not Initialized: FDPFOP received a return code of failure [ID 296830.1]
I can not undestand, why the alert sends mail?
Could you please let me know..what happened to standard manager? how to resolve the above issue? why the above alert happened?
The above meatlink note did not help much....Hi;
>
/*The output file for your concurrent request is not initialized.
Cause: Your concurrent program execution was not preceded by calls to standard
Application Object Library routines to initialize concurrent processing. FDPFOP
received a return code of failure.
Action: Change your concurrent program to initialize files by calling standard
Application Object Library routines. */
The Output File For Your Concurrent Request is Not Initialized: FDPFOP received a return code of failure [ID 296830.1]
I can not undestand, why the alert sends mail? Could you please let me know..what happened to standard manager? how to resolve the above issue? why the above alert happened?I checked related note and it mention its internal bug which mean we cant say too many thing about issue.
The above meatlink note did not help much....It helped or not? Issue still appear or not?
Please run adadmin utulity >> from Maintain Applications Files>> Relink Applications programs
Be sure it wont through any error message than retest issue
Regard
Helios -
Context-sensitive help - where is the CS topic folder in the output files?
I have created a FlashHelpPro help file in RoboHelp 7 HTML. In the project setup pane, I have Map ID'd my context-sensitive topics and linked them to their respective pages. I generated the project, but there is no folder containing the context-sensitive topics in the output files. As a result, the developer suggested that I need to create a separate folder in the Project Manager that contains all the context-sentitive topics. Is this actually the next step, or can the developer find what he needs elsewhere in the files?
I haven't seen anything about creating a separate folder in the Project Manager, which seems redundant as there is the 'Context-sensitive Help' folder already present in the Project Set-up. Do I need to create a separate folder, as suggested by the developer? If not, where can he find the context-sensitive files in the output? Thank you.Hi,
What do you mean that the context sensitive topics are not in the output? RoboHelp generates your output and (in WebHelp, so the same should count for FlashHelp) puts the context sensitivity in cshdat_webhelp.htm. Your developer doesn't need to worry about this, he just has to get his call right.
For information on calling the help, see http://www.grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm. It's for WebHelp but it should be the same for FlashHelp.
If your developer only wants to know which mapid's he has to call, you best give them your map files (the .h files).
Greet,
Willam
This e-mail is personal. For our full disclaimer, please visit www.centric.eu/disclaimer. -
Exe file not producing the output files
Could anyone please help me with my exe file. I have an exe file "exeFile" which takes more than one file as input from the source "c:/files" and produces some files as output into the destination "c:/files". Both my source and destination is same. My code given below is neither showing any error nor outputting any files. My code is:
private static void compilingFiles() throws IOException
String FirstParam = "C:/files";
String SecondParam = "C:/files";
Process proc =Runtime.getRuntime().exec("cmd /c start /MIN C:/files/exeFile " + FirstParam, (String[])null, new File(SecondParam));
}After going through The reference, I modified my code as under. My first exe file "tex" is doing the necessary as before, that is producing the output files to the destination, but the second exe file "fi2t1" is not producing the necessary output.
My output after running this file is:
<ERROR>
</ERROR>
Process exitValue1: 0
<ERROR>
</ERROR>
Process exitValue2: 0
<ERROR>
</ERROR>
Process exitValue1: 0
<ERROR>
</ERROR>
Process exitValue2: 0
<ERROR>
</ERROR>
Process exitValue1: 0
<ERROR>
</ERROR>
Process exitValue2: 0
So as per The reference, I think my code is right - "So, MediocreExecJavac works and produces an exit value of 2. Normally, an exit value of 0 indicates success; any nonzero value indicates an error.".
So please tell me where am I wrong. My code is:
import java.io.BufferedReader;
import java.io.File;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.util.*;
public class FontDriverCompile
public FontDriverCompile()
void compileFile(File newFile, String renameSub, File outputfile) throws IOException
String FirstParam = "C:\\Temp\\sample\\font-driver.tex";
String FirstParam2 = "C:\\Temp\\sample";
String SecondParam = "C:\\Temp\\sample";
try
Process proc1 =Runtime.getRuntime().exec("cmd /c start /MIN C:/Temp/sample/tex " + FirstParam, (String[])null, new File(SecondParam));
InputStream stderr = proc1.getErrorStream();
InputStreamReader isr = new InputStreamReader(stderr);
BufferedReader br = new BufferedReader(isr);
String line = null;
System.out.println("<ERROR>");
while ( (line = br.readLine()) != null)
System.out.println(line);
System.out.println("</ERROR>");
int exitVal1 = proc1.waitFor();
System.out.println("Process exitValue11: " + exitVal1);
catch (Throwable t)
System.out.println("t.printStackTrace()_1");
t.printStackTrace();
try
Process proc2 =Runtime.getRuntime().exec("cmd /c start /MIN C:/Temp/sample/fi2t1 " + FirstParam2, (String[])null, new File(SecondParam));
InputStream stderr = proc2.getErrorStream();
InputStreamReader isr = new InputStreamReader(stderr);
BufferedReader br = new BufferedReader(isr);
String line = null;
System.out.println("<ERROR>");
while( (line = br.readLine()) != null)
System.out.println(line);
System.out.println("</ERROR>");
int exitVal2 = proc2.waitFor();
System.out.println("Process exitValue2: " + exitVal2);
catch (Throwable t)
System.out.println("t.printStackTrace()_2");
t.printStackTrace();
}Message was edited by:
sony_tj -
Using Timestamp [TS] in the output file name
Hello Everyone,
i am trying to get the timestamp into the output file generated by the store file atom. Since my Outbound channel is void i thought i could use:
[TS]
or
[yyyy][mm][dd][hour][min][sec]
My File Specification is: C:\Temp\Out\blabla[TS].xml and unfortunatelythe outputfile are named: blabla[TS].xml
What am I doing wrong? Can i not use those placeholders in an atom?
Help is greatly appreciated
Best regards
SimonHi Simon,
Now I see, you're trying to maintain the timestamp in the SLD FILO section and not in a store file atom of an integration scenario.
In this case, please check the following help document:
filePattern
To define the outbound file pattern, define the directory and the file specification. Enter the full path. The integration framework supports Microsoft Windows UNC (Universal Naming Convention) names. The directory you enter must exist in the file system. The user for directory access must have the necessary rights in the file system.
You can use the following special characters and variables:
Character/
Variable
Description
To introduce numbering in the file directory use ?.
If you enter for example data????.xml, the integration framework creates an outbound file called data0000.xml, if the directory is empty. If a file, following this naming convention, already exists in the outbound directory, the next generated file name is data<last number>+1.xml. If data0000.xml already exists in the directory, the next file in the directory is data0001.xml.
[vbiu]
This is a placeholder for a value you can define in scenario package processing. If you use the value, add the b1im_filename attribute directly in the outbound payload.
<xsl:template name="transform">
<xsl:attribute name="b1im_filename">myName</xsl:attribute>
</xsl:template>
[TS]
To add a timestamp to the file name, use the variable. This gives you another possibility to define unique file names.
[yyyy]
Adds the current year in four digits to the file name
[yy]
Adds the current year in two digits to the file name
[mm]
Adds the current month to the file name
[dd]
Adds the current day to the file name
[hour]
Adds the current hour to the file name
[min]
Adds the current minute to the file name
[sec]
Adds the current second to the file name
You can also combine the variables. For example file[TS]??.[hour][min].txt
Here is a screenshot of my SLD FILO definition and from the result:
Best regards
Bastian
P.S.: just in case you need to define a filename in the integration step for the store file atom, here is a screenshot:
Maybe you are looking for
-
I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys w
-
In the app store icon I see a number of apps for update, but when I open the app store I can´t see the apps for update. This happend from my last iPhone update to 6.1.1 version.
-
Error when displaying modeling on MultiProvider, urgent!!!
Hi Expert, There is one runtime error when I try to display modeling on MultiProvider. but It's OK to display ODS and Cube. Could anyone tell me how to do? I can't find any notes about this. Thanks a lot!! Carlos ============================= Messa
-
How can I find autoextend size for data file?
Hi All, Oracle 10.2.0.3 AIX I have checked dba_data_files for autoextend size. it shows me default autoextend size. one of my data file is set to 50mb autoexted. Where can I find actual autoextend size? Thanks, Vishal
-
Hi, We have an application under windows 2000 that uses IBM JVM 3.0. With the IBM JVM we are able to use up to 3GO of memory for java ( mx parameter). Due to the DST change we upgraded the JVM to SUN JVM 1.3.1_19. However with SUN JVM the max memory