Adding lines in F110 and F150

Hello together,
did anybody modified SAP transactions F110 and F150 to have the possibility to add manually open items in payment proposal in F110 and to add manually open items in dunning proposal in F150?
Which effort is needed to do so?
Thanks in advance.

Not possible.... so we have to modify SAP

Similar Messages

  • Adding line item prior to ACC_DOCUMENT03 Posting

    Due to our legacy currency alignment on some systems being incongruent with our SAP ECC 6.0 environment, some upstream inbound IDocs will post with 2 decimals for HUF when 6.0 environment has 0 decimals for HUF.  The inbound documents are coming in as ACC_DOCUMENT03 IDocs.
    There will be rounding involved.  iN certain cases, the rounding will mean that the line items are no longer in balance.
    Rather than alter the value of the inbound line items, preference is to add line item prior to posting that contains the balance difference and posts to the "rounding difference" account.
    Has anyone expereinced this situation before? How was it resolved?
    Considered adding line item via "BAPI_ACC_DOCUMENT_POST" or, if possible, within "'BAPI_INCOMING_INVOICE_CREATE'".
    Has anyone faced this or a simlar issue before?  How was it resolved?  Was it resolved internally?

    Hello Weng,
    I also looked on SAP notes. 
    There is a note with much information about Tax Postings with accounting BAPIs and it's a consulting note.  The note number is 626235.
    Regards,
    Rae Ellen Woytowiez
    Edited by: Rae Ellen Woytowiez on Dec 21, 2010 10:11 PM

  • Add an in-line notes panel and some kind of notification.

    It would improve our workflow if my designer could see In-line notes as they are added to the document, and get some sort of pop-up notification when a new in-line note is added.  Our current process is to have the designer search through the document periodically and is in-efficient.  We used a plug-in for CS4 that was provided by a vendor, but they have not updated for CS5 yet.

    sorry the site's Ui was really laggy that day
    I found this cool chrome extension called Cisco Dialer.
    It works wonderfully with a simple setup (just put in the phone's IP address) hover over a gmail contact's number and a little phone pops up on the right hand side - click it and it automatically dials it through your cisco phone. I just wish this extension was chrome wide, not just for gmail contacts.

  • Permissions problem after adding 2nd hard drive and putting user home there

    I added a 2nd drive and put my user home on this. The reset password tip from command line at startup never sees this new volume, so I have been having to add my user to most files manually. Almost everything works now except iMovie. When I try to import it says I probably cannot write to the events.localize folder. I have tried symbolic links, manually editing the permissions, etc. no luck. Any ideas?

    ill try the fsck right now
    heres the output you requested
    Filesystem Size Used Avail Use% Mounted on
    /dev/sda3 7.3G 3.9G 3.0G 57% /
    none 505M 120K 505M 1% /dev
    none 505M 0 505M 0% /dev/shm
    /dev/sda1 99M 12M 83M 12% /boot
    /dev/sdb1 38G 93M 38G 1% /home
    total 46G 4.0G 42G 9%
    thats interesting.
    /dev/sda3 is showing its old values almost like something in the partition tables didn't get updated?
    Last edited by =OTS=G-Man (2009-12-09 06:19:55)

  • Motion videos from captivate to .swf create visual noise - added lines

    There are a lot of added lines, field box outlines, etc. added to all my video portions on the .swf output.
    It's almost as if they are from a previous frame and just don't go away.  They're a little like a 'trail' mark from a previous frame in the video.
    Is there any setting I can change to get this to stop or how can I clean these up?

    Yes!  That did it - file size doesn't matter for me so this works.  Thank You

  • Added Lines not Totaling

    I have a Parts Estimate flowed form with a button to add more lines if needed. All the lines total correctly and total in the Total Estimate at the bottom on the page. But the added lines will not total on their own line, it just tabs over it.
    Everything else works fine but the subform added lines.
    I've looked the scripts over but not sure where I'm going wrong.
      Tks...
                HHud

    Hi HHud,  Are you using FormCalc or JavaScript?  You will need to cause the calculate event to fire again, either explicitly with execCalculate or referencing something in the changes like the instance managers count property.  You don't have to do anything with it, just referencing it will setup a dependency.  Bruce

  • Customer/Vendor A/C with line item details and with opening and closing Bal

    Dear Sir / Madam,
    Is it possible to have a customer and / or vendor Sub-Ledger account-
    with line item details and with opening and closing balance detail
    for a particular period.?
    Regards
    Chirag Shah
    I thank for the given below thread which has solved the same problem for G/L Account
    Re: Report to get the ledger printout with opening balances

    Hello Srinujalleda,
    Thanks for your precious time.
    I tried the referred T-Code
    But this report is not showing Opening balance, closing balance detail.
    It only gives transactions during the specified posting period and total of it.
    Please guide me further in case if I need to give proper input at selection screen or elsewhere.
    Client Requires Report in a fashion
    Opening Balance as on Date
    + / -  Transactions during the period
    = Closing Balance as on date
    As that of appearing for G/L Account by S_ALR_87012311
    Thanks once again & Regards
    Chirag Shah

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • Do not include some lines in Subtotals and totals in ALV

    Hello All,
    I am printing a report with all sale order details and Quantities( delveered ,conformed etc..) iam doing subtotals based on the material and Plant.
    In this if the document date is less than the SY-DATUM, we should not include the quantity into the subtotals and totals, Only the orders wiht doc date GQ to Sy-datum then display them..
    As of now I am using ALV grid display and doing the sums by 
    l_wa_fcat-do_sum = c_x. (field catalog) for the whole colom) but i want to avoid sum row from tehe calculation based on the condition.
    <b>Do we have any way to achive this, like if we want to have separate color for a purticular Cell then we add an extra field in outout table and we link this field with layout-coltab_fieldname in the same way or any other way if we have</b>.
    I will be  thankfull to if you can provide me your valuable suggesstions on this. it is very urgent. I am trying in all the ways from my side.

    Hi,
    see this code,
    Complete code for the ALV grid example
    This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
    The example shows:
    How to setup the ALV grid
    How to ste focus to the grid
    How to set the title of the grid
    How to allow a user to save and reuse a grid layout (Variant)
    How to customize the ALV grid toolbar
    Refresh the grid
    Set and get row selection and read line contents
    Make and exception field (Traffic light)
    Coloring a line
    Steps:
    Create screen 100 with the ALV grid. Remember to include an exit button
    Add a change button to the ALV grid toolbar
    Create screen 200 the Change screen
    The screens:
    The code:
       REPORT sapmz_hf_alv_grid .
    Type pool for icons - used in the toolbar
       TYPE-POOLS: icon.
       TABLES: zsflight.
    To allow the declaration of o_event_receiver before the
    lcl_event_receiver class is defined, decale it as deferred in the
    start of the program
       CLASS lcl_event_receiver DEFINITION DEFERRED.
    G L O B A L   I N T E R N  A L   T A B L E S
       *DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
    To include a traffic light and/or color a line the structure of the
    table must include fields for the traffic light and/or the color
       TYPES: BEGIN OF st_sflight.
               INCLUDE STRUCTURE zsflight.
          Field for traffic light
       TYPES:  traffic_light TYPE c.
          Field for line color
       types:  line_color(4) type c.
       TYPES: END OF st_sflight.
       TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
       DATA: gi_sflight TYPE tt_sflight.
    G L O B A L   D A T A
       DATA: ok_code         LIKE sy-ucomm,
        Work area for internal table
             g_wa_sflight    TYPE st_sflight,
        ALV control: Layout structure
             gs_layout       TYPE lvc_s_layo.
    Declare reference variables to the ALV grid and the container
       DATA:
         go_grid             TYPE REF TO cl_gui_alv_grid,
         go_custom_container TYPE REF TO cl_gui_custom_container,
         o_event_receiver    TYPE REF TO lcl_event_receiver.
       DATA:
    Work area for screen 200
         g_screen200 LIKE zsflight.
    Data for storing information about selected rows in the grid
       DATA:
    Internal table
         gi_index_rows TYPE lvc_t_row,
    Information about 1 row
         g_selected_row LIKE lvc_s_row.
    C L A S S E S
       CLASS lcl_event_receiver DEFINITION.
         PUBLIC SECTION.
           METHODS:
            handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
              IMPORTING
                e_object e_interactive,
            handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
              IMPORTING e_ucomm.
       ENDCLASS.
          CLASS lcl_event_receiver IMPLEMENTATION
       CLASS lcl_event_receiver IMPLEMENTATION.
         METHOD handle_toolbar.
    Event handler method for event toolbar.
           CONSTANTS:
    Constants for button type
             c_button_normal           TYPE i VALUE 0,
             c_menu_and_default_button TYPE i VALUE 1,
             c_menu                    TYPE i VALUE 2,
             c_separator               TYPE i VALUE 3,
             c_radio_button            TYPE i VALUE 4,
             c_checkbox                TYPE i VALUE 5,
             c_menu_entry              TYPE i VALUE 6.
           DATA:
               ls_toolbar  TYPE stb_button.
      Append seperator to the normal toolbar
           CLEAR ls_toolbar.
           MOVE c_separator TO ls_toolbar-butn_type..
           APPEND ls_toolbar TO e_object->mt_toolbar.
      Append a new button that to the toolbar. Use E_OBJECT of
      event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
      This class has one attribute MT_TOOLBAR which is of table type
      TTB_BUTTON. The structure is STB_BUTTON
           CLEAR ls_toolbar.
           MOVE 'CHANGE'        TO ls_toolbar-function.
           MOVE  icon_change    TO ls_toolbar-icon.
           MOVE 'Change flight' TO ls_toolbar-quickinfo.
           MOVE 'Change'        TO ls_toolbar-text.
           MOVE ' '             TO ls_toolbar-disabled.
           APPEND ls_toolbar    TO e_object->mt_toolbar.
         ENDMETHOD.
         METHOD handle_user_command.
      Handle own functions defined in the toolbar
           CASE e_ucomm.
             WHEN 'CHANGE'.
               PERFORM change_flight.
           LEAVE TO SCREEN 0.
           ENDCASE.
         ENDMETHOD.
       ENDCLASS.
    S T A R T - O F - S E L E C T I O N.
       START-OF-SELECTION.
         SET SCREEN '100'.
       *&      Module  USER_COMMAND_0100  INPUT
       MODULE user_command_0100 INPUT.
         CASE ok_code.
           WHEN 'EXIT'.
             LEAVE TO SCREEN 0.
         ENDCASE.
       ENDMODULE.                 " USER_COMMAND_0100  INPUT
       *&      Module  STATUS_0100  OUTPUT
       MODULE status_0100 OUTPUT.
         DATA:
      For parameter IS_VARIANT that is sued to set up options for storing
      the grid layout as a variant in method set_table_for_first_display
           l_layout TYPE disvariant,
      Utillity field
           l_lines TYPE i.
    After returning from screen 200 the line that was selected before
    going to screen 200, should be selected again. The table gi_index_rows
    was the output table from the GET_SELECTED_ROWS method in form
    CHANGE_FLIGHT
         DESCRIBE TABLE gi_index_rows LINES l_lines.
         IF l_lines > 0.
           CALL METHOD go_grid->set_selected_rows
               EXPORTING
                 it_index_rows = gi_index_rows.
           CALL METHOD cl_gui_cfw=>flush.
           REFRESH gi_index_rows.
         ENDIF.
    Read data and create objects
         IF go_custom_container IS INITIAL.
      Read data from datbase table
           PERFORM get_data.
      Create objects for container and ALV grid
           CREATE OBJECT go_custom_container
             EXPORTING container_name = 'ALV_CONTAINER'.
           CREATE OBJECT go_grid
             EXPORTING
               i_parent = go_custom_container.
      Create object for event_receiver class
      and set handlers
           CREATE OBJECT o_event_receiver.
           SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
           SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
      Layout (Variant) for ALV grid
           l_layout-report = sy-repid. "Layout fo report
    Setup the grid layout using a variable of structure lvc_s_layo
      Set grid title
           gs_layout-grid_title = 'Flights'.
      Selection mode - Single row without buttons
      (This is the default  mode
           gs_layout-sel_mode = 'B'.
      Name of the exception field (Traffic light field) and the color
      field + set the exception and color field of the table
           gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
           gs_layout-info_fname = 'LINE_COLOR'.
           LOOP AT gi_sflight INTO g_wa_sflight.
             IF g_wa_sflight-paymentsum < 100000.
          Value of traffic light field
               g_wa_sflight-traffic_light = '1'.
          Value of color field:
          C = Color, 6=Color 1=Intesified on, 0: Inverse display off
               g_wa_sflight-line_color    = 'C610'.
             ELSEIF g_wa_sflight-paymentsum => 100000 AND
                    g_wa_sflight-paymentsum < 1000000.
               g_wa_sflight-traffic_light = '2'.
             ELSE.
               g_wa_sflight-traffic_light = '3'.
             ENDIF.
             MODIFY gi_sflight FROM g_wa_sflight.
           ENDLOOP.
      Grid setup for first display
           CALL METHOD go_grid->set_table_for_first_display
             EXPORTING i_structure_name = 'SFLIGHT'
                       is_variant       = l_layout
                       i_save           = 'A'
                       is_layout        = gs_layout
             CHANGING  it_outtab        = gi_sflight.
       *-- End of grid setup -
      Raise event toolbar to show the modified toolbar
           CALL METHOD go_grid->set_toolbar_interactive.
      Set focus to the grid. This is not necessary in this
      example as there is only one control on the screen
           CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
         ENDIF.
       ENDMODULE.                 " STATUS_0100  OUTPUT
       *&      Module  USER_COMMAND_0200  INPUT
       MODULE user_command_0200 INPUT.
         CASE ok_code.
           WHEN 'EXIT200'.
             LEAVE TO SCREEN 100.
             WHEN'SAVE'.
             PERFORM save_changes.
         ENDCASE.
       ENDMODULE.                 " USER_COMMAND_0200  INPUT
       *&      Form  get_data
       FORM get_data.
    Read data from table SFLIGHT
         SELECT *
           FROM zsflight
           INTO TABLE gi_sflight.
       ENDFORM.                    " load_data_into_grid
       *&      Form  change_flight
    Reads the contents of the selected row in the grid, ans transfers
    the data to screen 200, where it can be changed and saved.
       FORM change_flight.
         DATA:l_lines TYPE i.
         REFRESH gi_index_rows.
         CLEAR   g_selected_row.
    Read index of selected rows
         CALL METHOD go_grid->get_selected_rows
           IMPORTING
             et_index_rows = gi_index_rows.
    Check if any row are selected at all. If not
    table  gi_index_rows will be empty
         DESCRIBE TABLE gi_index_rows LINES l_lines.
         IF l_lines = 0.
           CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
                EXPORTING
                     textline1 = 'You must choose a line'.
           EXIT.
         ENDIF.
    Read indexes of selected rows. In this example only one
    row can be selected as we are using gs_layout-sel_mode = 'B',
    so it is only ncessary to read the first entry in
    table gi_index_rows
         LOOP AT gi_index_rows INTO g_selected_row.
           IF sy-tabix = 1.
            READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
           ENDIF.
         ENDLOOP.
    Transfer data from the selected row to screenm 200 and show
    screen 200
         CLEAR g_screen200.
         MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
         LEAVE TO SCREEN '200'.
       ENDFORM.                    " change_flight
       *&      Form  save_changes
    Changes made in screen 200 are written to the datbase table
    zsflight, and to the grid table gi_sflight, and the grid is
    updated with method refresh_table_display to display the changes
       FORM save_changes.
         DATA: l_traffic_light TYPE c.
    Update traffic light field
    Update database table
         MODIFY zsflight FROM g_screen200.
    Update grid table , traffic light field and color field.
    Note that it is necessary to use structure g_wa_sflight
    for the update, as the screen structure does not have a
    traffic light field
         MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
         IF g_wa_sflight-paymentsum < 100000.
           g_wa_sflight-traffic_light = '1'.
      C = Color, 6=Color 1=Intesified on, 0: Inverse display off
           g_wa_sflight-line_color    = 'C610'.
         ELSEIF g_wa_sflight-paymentsum => 100000 AND
                g_wa_sflight-paymentsum < 1000000.
           g_wa_sflight-traffic_light = '2'.
           clear g_wa_sflight-line_color.
         ELSE.
           g_wa_sflight-traffic_light = '3'.
           clear g_wa_sflight-line_color.
         ENDIF.
         MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
    Refresh grid
         CALL METHOD go_grid->refresh_table_display.
         CALL METHOD cl_gui_cfw=>flush.
         LEAVE TO SCREEN '100'.
       ENDFORM.                    " save_changes

  • How to set border lines in table and also in template in the smartforms ?

    How to set border lines in table and also in template in the smartforms ?
    As I have to create table with following detals
    total row = 3
    row1 = 3 column
    row2 = 6 column
    row3 = 9 column
    for 2nd and 3rd row data to be fetched using coding.
    so can anybody explain me what should i use
    Table or Template ?
    and I want the border like excel format.
    Can anybody suggest me ?
    Thanks
    naresh

    if the data is multiple i.e. line items choose table.
    if the data is single i.e. fixed choose template.
    Create table
    >  Draw u r no lines
    > choose option select pattern
    > select display framed patterns
    Choose u r required one.
    out lined, or full lined. u can choose option.
    same procedure to be followed for template also.
    with regards,
    Kiran.G

  • TS3999 In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ event

    In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
    Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date?  i.e. more "user-friendly" presentation?
    Thx!
    [email protected]

    In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
    Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date?  i.e. more "user-friendly" presentation?
    Thx!
    [email protected]

  • What is line item dimension and cardinality in BI 7.0

    Can u plz suggest me what is line item dimension and cardinality in BI 7.0..
    Thanks in advance.
    Venkat

    Hi Babu
    Line item: This means the dimension contains precisely one characteristic. This means that the system does not create a dimension table. Instead, the SID table of the characteristic takes on the role of dimension table. Removing the dimension table has the following advantages:
    ¡        When loading transaction data, no IDs are generated for the entries in the dimension table. This number range operation can compromise performance precisely in the case where a degenerated dimension is involved.
    ¡        A table- having a very large cardinality- is removed from the star schema. As a result, the SQL-based queries are simpler. In many cases, the database optimizer can choose better execution plans.
    Nevertheless, it also has a disadvantage: A dimension marked as a line item cannot subsequently include additional characteristics. This is only possible with normal dimensions.
    Note: In SAP BW 3.0, the term line item dimension from SAP BW 2.0 must a) have precisely one characteristic and b) this characteristic must have a high cardinality. Before, the term line item dimension was often only associated with a). Hence the inclusion of this property in the above. Be aware that a line item dimension has a different meaning now than in SAP BW2.0.
    SAP recommends that you use ODS objects, where possible, instead of InfoCubes for line items.
    Hope this helps.
    Plz check these links:
    SAP Help:
    http://help.sap.com/saphelp_nw04s/helpdata/en/a7/d50f395fc8cb7fe10000000a11402f/frameset.htm
    Thanks & Regards
    Reward if helped
    Edited by: Noor Ahmed khan on Aug 5, 2008 2:36 PM

  • HT1800 How can I add a Epson Stylus SX445w to my mac Book Pro this is the second one I've tried and failing miserably...it should be so simple...spoken to the help line at Epson and they say it's down to Apple !! Somebody please help me

    How can I add a Epson Stylus SX445w to my Mac Book Pro
    This is the second one I've tried and failing miserably...it should be so simple...I've installed poken to the help line at Epson and they say it's down to Apple !! Somebody please help me

    Yes I did everything that I was instructed to do!
    Cheers
    Joyce

  • My Imac is showing gray screen with red line when booting and restarts again

    My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help

    The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
    Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode

  • How do i get this effect in the video 0:7 - 0:8 That the lines come together and build a logo? pls h

    How do i get this effect in the video 0:7 - 0:8 That the lines come together and build a logo? pls help me      http://www.youtube.com/watch?v=mfU8bZDKAMQ&list=HL1352499622&feature=mh_lolz

    This looks like the final logo was created with several layers probably in Illustrator, then the file was most likely imported into After Effects and revealed by animating mask paths.

Maybe you are looking for