Adding logo to signature block

I need to add a logo to my signature block for my company. How can I do this?

When you create your signature block all you need to do is to drag the logo you want to insert into that signature block in Mail > Preferences… > Signatures. When you have the logo over it you should get a appearing and the insertion point should appear for where it's going to go.

Similar Messages

Unrecognized Lync contact opens when sip address added in the outlook signature block

I have added my sip address into my outlook signature block. Why does an inactive contact conversation opens, if I click on the link in the signature? It looks, like my profile in Lync, with the same picture and name, but the presence cannot be recognized,
thus a Lync message cannot be sent.

Hi,
Which Lync 2010 command-line parameter did you added in the signature block?
If you want to open the IM conversation windows of you when others clicking the signature, you can use the following command-line parameter:
Sip:[email protected]
Sips:[email protected]
Im:<sip:[email protected]>
More details:
https://technet.microsoft.com/en-us/library/gg398376(v=ocs.14).aspx
If you enter the correct command-line, however the issue persists, please try to delete your Lync user profile with the following path and then test the issue again:
HKCU\Software\Microsoft\Communicator\[email protected]
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

How can I put a facebook logo in my signature block without it appearing as an attachment to the receiver of the email?

How can I put a facebook logo in my signature block using the mail program without it appearing as an attachment to the receiver of the email?

Not sure what OS you're on, but...
Might see if this helps...
http://allforces.com/2006/04/14/css-signatures/

Expanding a signature block from 1 person to 2, 3 or 4 persons

Need help providing a form with a button that expands a signature block from a 1 person signature to 2, 3 or 4 person signatures. The form is signed by any number of people. We want the base version to only have 1 signature block and a "button" to add more signature blocks. Any ideas? If the number of blocks added ends up increasing the numer of pages, then the pagination should auto change. I have seen similar forms so I know it can be done, just not sure how!

Ask in the LiveCycle Designer forum. What you've seen before is probably a dynamic XFA form created with LiveCycle Designer.

Cannot verify signature block file using BC

I get the below exception when verifying a signed jar.The public key is from the certificate created from the Bouncy Castle's Provider
java.lang.SecurityException: cannot verify signature block file META-INF/LVL1
     at sun.security.util.SignatureFileVerifier.processImpl(SignatureFileVerifier.java:202)
     at sun.security.util.SignatureFileVerifier.process(SignatureFileVerifier.java:176)
     at java.util.jar.JarVerifier.processEntry(JarVerifier.java:276)
Signature algorithm used is : "SHA1WithRSAEncryption"
LVL1.SF and LVL1.RSA are in place inside the jar.No issues in creating the certificate and signing the jar as well.
The provider is added to the Security thro security.addprovider() dynamically.
Any pointers to resolve this issue ?

I have JRE 1.5.0_14 in the client machine.
Once this exception comes, no matter how many times I tried to relaunch the application same exception (cannot verify signature block is shown. Once i restart the server, its working fine.
Regarding jardiff, Yes. we use it.
Also, this exception is not shown on every machine which are trying to download same update. Only on few..
Any idea regarding this, please share it.
Chakri
Edited by: chakriv on Mar 22, 2010 9:02 PM

How to remove/displace default signature-block in a widget ?

I want the signature to be placed in some other position in the document unlike at the bottom. So while creating pdf form by Adobe Acrobat, I created a new signature field and placed at my desired position.
But, when I created a wedget through API with the pdf form, Its still showing the default signature block at the bottom of doc/pdf in the widget in addition the signature field I created. Now it is showing two signature fields.
Please help to remove the default signature block or guide me to change position of it.
Thanks in advance.

Hi Naveen,
Widgets always require an EchoSign email field to be present on the form in order to verify the signer.
If the email field is missing EchoSign will add this in the form of a signature block.
You can add an email field using text tags:
https://www.echosign.adobe.com/en/support/knowledgebase/Add_form_fields_and_signature_bloc ks_to_my_documents_through_EchoSign_text_tags.html

How do I write javascript for a text block to extract name from signature block?

Hello,
I've created a training certificate that the trainee has to sign electronically. To prevent someone from simply putting in their friends name in there and saving it; to send to their friend and help them from having to take the training and quiz I would like to write a javascript in the text block that would extract the name from their signature block and autofill the name in the text block. Is there a way to do this?

You would have to use JavaScript to access the signature field object and then you can access the various properties of the signature depending upon the certificate or method for signing.
signatureInfo
console.show();console.clear();
// Get particular info;
var f = this.getField("Signature1");
// uses the ppklite sig handler;
var Info = f.signatureInfo();
// Some standard signatureInfo properties;
console.println("name = " + Info.name);

Append signature block using signtool

I successfully signed using signtool.exe which is part of Windows sdk.
signtool sign /fd sha256 /a /f lost.pfx <filename>
I am able to see the file name signed however I attempted the /ac option of signtool which adds additional entries to signature block. So I used following syntax however resulted in error:
signtool sign /fd sha256 /a /ac lots1.pfx <filename>. Is this a proper usage? If not what would be the proper usage of this switch.
Additional question is the file being signed as a typical PE format file, so I am not sure signing twice with different certificate is allowed? Thanks,

Thanks this syntax works. But looks like more work ahead of me. The signing completed successfully however its certificate area still contain one certificate. Comparing the certificate only the one specified with the /f was there.
Also when verifying the signed file with verify /ph switch, threw out this error:
Signtool error: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.
FILE is not stamped
Number of files successfully verified: 0
number of warnings: 0
number of errors 1:
Still looking what is the issue here. However I still see this error when signing without additional file (/ac) so this error does not seem to be specific to /ac switch. It just appears, there is still one certificate in the file after signing.

How to include a signature block in a form

how to include a signature block in a form.
Please advise...

duplicate thread????
which user password you want to change..... and refer to your old thread... dont keep creating new threads for the same problem....

Creating Blank Signature Block in Acrobat Pro X

How do I create a blank signature block in Acrobat Pro X for someone else to sign?

You create a signature field.

Transfer Smartform Logo/Digital Signature To Unix

Hi Experts,
I need to transfer Smartform's Logo/ Digital Signature to unix server along with other text of smartform.
Current Status:
Text on the SF has been converted and tranferred to Unix using Dataset operations (Character by Character Approach in Binary Mode)
Problem:
Target file in Unix is not displaying the Logo and digital signature that is there in SF.
I am using 'Convert_OTF' and then 'QCE1_Convert' FM to gget PDF data and then transfer each character to dataset using Binary mode.
Please guide how to get Graphics also.
Thanks
Depesh

Hi,
Yes, I have tested the smartform using Print Preview as well as I have downloaded it to desktop in PDF format before sending it to UNIX. Downloaded as well as print preview file is showing the Graphics but when sent to Archive for UNIX directory, Graphics are not diplayed.
I am working on ECC 6.0.
Do you have any idea if the images in Binary format when sent to UNIX are readable directly or we need some other patch/storage maintenance for extracting images in UNIX.
Thanks
Depesh

Signature Block : AssureSign Documaker 12.2

Hello,
We are planning to integrate AssureSign Signature handling on our Forms.
Since this is the first time, I would like to reach out the more knowledge people in the group to see if we can get some assistance in getting an overview on how to go about using the "AssureSign Signature Block" feature of Documaker Objects.
Appreciate any guidance given to us!
Documaker Version 12.2
Thanks!

It may not be entirely clear what you are seeking with your query. Using AssureSign signatures would first require that you contract with AssureSign. Then you either use their server or an on-premise deployment as the distribution and collection point for signed PDFs. The signature type within Studio offer a variety of setup options for what "type" of signature you actually expect from your recipient.

JPEG Signature Block becomes too large as Mail Signature

I'd like to create a signature block to include in Apple Mail. I have created an appropriately sized one in an image program, but when I drag and drop that jpeg into Apple Mail, it becomes larger, too large for my purposes and too large for the people receiving it. Any thoughts?
Thanks,
Matt

Not sure what OS you're on, but...
Might see if this helps...
http://allforces.com/2006/04/14/css-signatures/

Certificate Widget, logo and signature options

Hi there,
I am using CP7 and inserted a certificate widget. From the options, I selected a logo and a signature file. Once published and played, the logo was incredibly small and the signature was hugely displayed across the top. (see pic)
I played around with resizing both logo and signature files but this didn't resolve the issue.
Here are the widget properties.
Any thoughts?

Where'd you get the certificate widget from? The provider would likely be the best to answer...
Otherwise, my only thought is the 'resolution' of the image. What's the DPI for both? '72' is a good general number. If the signature is, say, 300dpi that may be why its so large...

Formatting .pdf documents with digital signature block

I have created a 2007 MS Access database that exports reports to .pdf format. The reports look great and all works well. The issue I have now is finding a way to automatically apply to a signature block to the reports after they are created. Is there some sort of code format or text I can add to the report prior to it being exported to a .pdf file where Adobe will recognize it as a digital signature block, and create a digital signature block on the form? Several of these forms will be created daily and it would not be productive to manually add signature blocks to every single report.

Hi,
I have uploaded the file on the specified link:
http://www.filefactory.com/file/b3g5h37/n/abc.pdf

Adding logo to signature block

Similar Messages

Maybe you are looking for