Adding M-Series to Existing C-Series

All,
I'm thinking of getting a M-Series to get centralized reporting out of my existing C series.
When I add them to the M-Series do they lose their configuration (due to centralized management) or does the M-Series copy up their configuration for use going forwards?
I guess I'm asking how safe is it to add the M-series to and existing installation!
Thanks,
P

I don't know as I've only used the SMA to work with the WSA, but I looked through the manual a couple of times, and there's nothing there...
There is one telling difference in that the ESA boxes can be clustered, which may do config sync? (I only have one... )
Ken

Similar Messages

  • Issue in adding Space to the existing Virtual Machine from added repository

    Hi,
    I'm facing issue in adding Space to the existing Virtual Machine (Guest OS) from added repository.
    Environment details :
    VM Server : /OVS => 130GB
    /OVS/935970F2CC2D4B4391701397517F1001/ => 512 GB
    Things I have done :
    •     I created a VM (Guest OS) in the VM Server with 120 GB
    •     After creating the VM (Guest OS) , When I tried adding a VIRTUAL DISK of size 150 GB , I got an error “Maximum available Disk space is only 10GB”.
    My query :
    •     Will I be able to add space to Existing VM from the added Repository ( /OVS/935970F2CC2D4B4391701397517F1001/ ) , whose system.img is stored in path /OVS/running_pool/34_rhel/ .
    Kindly help me out in this.
    Thanks in advance.
    -- Sri

    Hi all,
    I checked with Oracle on the above and got the info currently , the we can utilise only the space available in the existing repo and cannot extend to additional repo.
    Work around is : Clone it to the other repo , or Use Symbolic link .
    Thanks,
    Sri.

  • Series calculation in baseoverride series

    Hi Guru,
    This might be a very basic question but still I need some explanation.
    I have item rolling up to product category in my hierarchy. I gave a base override of 100% at the product category for an Org and when I checked up the disaggregation at item level, I found that the % split is 62%, 18%, 18%. I was expecting 80%, 10% and 10% based on the baseline forecast quantities. Does anyone know how the split happens in these series.
    Thanks
    Ram

    Hi,
    Usually % cahnge to base series is a non proportional series. That means, if you enter % cahnge to base as 100% at the product category level, same 100% would appear as override at lower level say item level. If it's a proportional series like base override series, than demantra uses the internal logic ( Pl refer the UG) to determine how much should be proportioned to the child levels.
    Hope this helps
    Thanks
    Praveena Dasalakunte

  • Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches

    Once I connected my new server to my farm's config db, it returned all of the following missing locally. I stripped out any redundancies and Headings, and I'm left with 43. I'm looking for a efficient strategy. Should I start with the lowest version number
    and work my way up? Current DB version is 14.0.7015.1000. IIRC, SP2 is cumulative, so can I ignore the first two (SP1 and Hotfix), install SP2, and then the Language packs and etc on top?
    Sorted by version:
    Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000)
    Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
    Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition (14.0.7015.1000)
    Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition (14.0.7015.1000)
    Microsoft Office Server Proof (English) 2010 (14.0.7015.1000)
    Microsoft Office Server Proof (French) 2010 (14.0.7015.1000)
    Microsoft Office Server Proof (Russian) 2010 (14.0.7015.1000)
    Microsoft Office Server Proof (Spanish) 2010 (14.0.7015.1000)
    Microsoft SharePoint Portal (14.0.7015.1000)
    Microsoft User Profiles (14.0.7015.1000)
    Microsoft SharePoint Portal English Language Pack (14.0.7015.1000)
    Microsoft Shared Components (14.0.7015.1000)
    Microsoft Shared Coms English Language Pack (14.0.7015.1000)
    Microsoft Slide Library (14.0.7015.1000)
    Microsoft InfoPath Forms Services (14.0.7015.1000)
    Microsoft InfoPath Form Services English Language Pack (14.0.7015.1000)
    Microsoft Word Server (14.0.7015.1000)
    Microsoft Word Server English Language Pack (14.0.7015.1000)
    PerformancePoint Services for SharePoint (14.0.7015.1000)
    PerformancePoint Services in SharePoint 1033 Language Pack (14.0.7015.1000)
    Microsoft Visio Services English Language Pack (14.0.7015.1000)
    Microsoft Visio Services Web Front End Components (14.0.7015.1000)
    Microsoft Excel Services Components (14.0.7015.1000)
    Microsoft Document Lifecycle Components (14.0.7015.1000)
    Microsoft Excel Services English Language Pack (14.0.7015.1000)
    Microsoft Search Server 2010 Core (14.0.7015.1000)
    Microsoft Search Server 2010 English Language Pack (14.0.7015.1000)
    Microsoft Document Lifecycle Components English Language Pack (14.0.7015.1000)
    Microsoft Slide Library English Language Pack (14.0.7015.1000)
    Microsoft SharePoint Server 2010 (14.0.7015.1000)
    Microsoft Access Services Server (14.0.7015.1000)
    Microsoft Access Services English Language Pack (14.0.7015.1000)
    Microsoft Web Analytics Web Front End Components (14.0.7015.1000)
    Microsoft Web Analytics English Language Pack (14.0.7015.1000)
    Microsoft Excel Mobile Viewer Components (14.0.7015.1000)
    Recommendations?
    Thanks,
    Scott

    Thanks guys. I was able to get through all of the patches except for
    Language Pack for SharePoint, Project Server and Office Web Apps 2010 - English   missing locally
    Language Pack for SharePoint, Project Server and Office Web Apps 2010 -
    Spanish/Español missing locally
    This was my process:
    Config Wizard:
    Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches.
    SKIP installing the following two, as SP2 is cumulative
    Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000) (officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe)
    Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
    install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe
    install oslpksp2010-kb2687462-fullfile-x64-en-us.exe
    Got "There are no products affected by this package installed on this system."
    SO!
    Uninstalled Sharepoint 2010 Server
    WIll try to install again, without skipping #2, and reorder installation of oslpksp2010-kb2687462-fullfile-x64-en-us.exe
    Retry (the long way):
    Run SharePointServer.exe, get Missing Locally...
    Install oslpksp2010-kb2687462-fullfile-x64-en-us.exe SUCCESSFUL
    Install officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe SUCCESSFUL
    Reboot
    Install oserversp2010-kb2687453-fullfile-x64-en-us.exe SUCCESSFUL
    Rerun Config
    STILL MISSING
    Download oslpksp2010-kb2687462-fullfile-x64-es-es.exe, run, "there are no products affected..."
    Uninstall.
    Re-retried, only got through the first couple:
    Run SharePointServer.exe, get Missing Locally...
    Install SP1 officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe, SUCCESSFUL
    Install English Lang Pack oslpksp2010-kb2687462-fullfile-x64-en-us.exe, "There are no products affected by this package installed on this system."
    Install Spanish Lang Pack oslpksp2010-kb2687462-fullfile-x64-es-es.exe,
    Install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe, run Config Wizard
    I'm now downloading 462150_intl_x64_zip.exe, going to try and install it as step three.
    Any suggestions greatly appreciated.
    Thanks,
    Scott

  • X Series vs. M Series DDK

    In 2009 I completed a project involving the M Series DAQ board NI PCI-6251. I developed a kernel module for PureDarwin. I developed a user space measurement controller based on the MHDDK nimseries/nimhddk_other. Worth to mention is a very involved work on self callibrating the NI PCI-6251, and I posted some questions and results in this forum.
    Now I am going to start another project on FreeBSD. The kernel module is ready, and for prooving the concept, I testet the setup with an old NI PCI-6251, and everything is working so far. Anyway, I need to buy a new board for the new project, I am in doubt whether I should stay with the M Series technology or whether I should start the new project directly with a new X Series board.
    So my questions are:
    Is the X Series DDK quite similar to the M Series DDK...?
    ... could I use most of my old M Series code with X Series, perhaps with some tweaks,
    or would I need to start from scratch?
    What would be the major benefits of X Series over M Series?
    With  PCI-6251 I achieve in 2 AI channel multiplexing 500 kS/s. It would be good to achieve 1 MS/s for 2 AI channels.
    I would also love to have more flexibility of AO full scale, the PCI-6251 got 5 V and 10 V. For one mode of operation I would need 100 mV.
    Can I get this with a X Series board at more or less the same price tag as the PCI-6251 (let's say perhaps 50 % more)?
    Many thanks for any advises
    Best regards
    Rolf 
    Solved!
    Go to Solution.

    Hello Rolf,
    The X Series and M Series DDKs are alike in concept, but very different when it comes to details. There are many differences between the M Series register map and the X Series register map. These differences at the lowest level mean that pretty much all of the register logic that you implemented for M Series will need to be changed for X Series boards.
    You can find benefits and general information here:
    http://www.ni.com/xseries
    Here is a listing of X series devices as well as their capabilities.
    http://sine.ni.com/np/app/main/p/bot/no/ap/daq/lang/en/pg/1/sn/n21:41,n17:daq,n23:11502/sb/+nigenso7...
    I would also recommend contacting a technical sales representative with your specifications. They will be able to recommend the right board.
    I hope this helps,
    Steven T.

  • Stack Bar with floating series, invisible or transparent series

    In Excel, I have several stack bar diagrams that have invisible, hidden series that make the remaining visible series appear to be floating.  What is the best way to do this in Xcelsius.  The only solution I have found is to use the "iTheme" theme, and make the invisible series the same color as the Plot Area.  Is there another method or theme?
    I am not a fan of the "iTheme".  I have experiemented with other themes, but other themes' texture, gradient makes it impossible to fully hide the invisible series.
    Is there another theme out there with a "flat", no gradient feel, with no shadow, or series border (or a series border you can control)?

    hello Ultim4t3, maybe that's an issue with hardware acceleration - please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]] or in case there is no new version available at the moment or this doesn't solve the issue, disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).

  • InDesign CC 2014 version adding pages to an existing document keeps crashing, why?

    InDesign CC 2014 version adding pages to an existing document keeps crashing, why?

    Because there's a problem in the file. See Remove minor corruption by exporting

  • Adding portal to an existing domain

    Hi I have a JSP/Servlet web applicatin and
    I want to make it a portal application.
    I was following Weblogic Portal Development
    Guide 7.0. I found the section
    "Adding portal to an existing domain" is very incomplete
    or confusing and I cannot do it. Is there any better document
    for this?

    Judging from the dates between these two entrries and no answers, I'd
    guess that there isn't anyone from BEA monitoring this group? I am in a
    similar situation. What I want to understand is how one can "portalize" an
    existing web app. I understand there are implications to some of the
    presentation, but specifically, I want to deploy a Servlet based app that
    uses EJBs and deploy this as an EAR in the same domain as the portal
    (perhaps under the /applications directory). I can make everything work
    except the webflow where I reference the Servlet.
    Specifically, I have a presentation page that is defined to be my servlet.
    When I try to build a webflow URL referencing this event, I get errors from
    the portal because it presumes it may be located somewhere else or in a
    different namespace. It leads me to believe that I can't reference a
    servlet unless it is under the /framework or /portal directories under the
    portal web-app directory. I'm convinced there must be a way to reference
    other web components that aren't specifically part of the portal web app,
    but can't figure out how to propagate the webflow element to the actual
    servlet I want.
    Any ideas from the community at large? This must be something other
    people have wrestled with since I can't imagine that only new apps will be
    put into portals.
    Thanks,
    Mark
    "Sara" <[email protected]> wrote in message
    news:[email protected]...
    >
    I'm facing similar problems too. I have an ear file in an existing domainthat
    I want to use to create a portal. The documentation on this is quiteconfusing
    and the steps require so many manual steps that it is bound to beerror-prone.
    What's BEA's recommended way to expose an existing Weblogic application asa portal
    Thanks in advance
    -Sara
    "David Zhang" <[email protected]> wrote:
    Hi I have a JSP/Servlet web applicatin and
    I want to make it a portal application.
    I was following Weblogic Portal Development
    Guide 7.0. I found the section
    "Adding portal to an existing domain" is very incomplete
    or confusing and I cannot do it. Is there any better document
    for this?

  • Adding replication to an existing database.

    I am looking at adding replication to an existing database. This database has lots of existing containers many of them are 1G in size. How will this be handled when the master and client initially start? Will the master just start sending to the client? Is there another option?

    Yes. This, and the alternatives, are described in the Ref Guide, on the page entitled "Initializing a new site".
    Alan Bram
    Oracle

  • Series link and Smart Series

    Until Sky stop prefixing programmes with the moniker NEW:, series link and Smart Series will not work because the planner thinks they are another programme.  E.g. last night UNDER THE DOME restarted, and was set in my Smart series.  Unsurprisingly, it did not record as the programme was called NEW: UNDER THE DOME.,...... Not technical, you can keep on rebuilding your planners all day, but the solution is obvious, except to Sky, no surprise there......

    The 'new' issue (which was fixed I think in R010) never stopped programs recordings, it just mixed up the stacks if you had episodes both with 'New' and without. This has been fixed in the majority of cases.
    Your issue appears to be entirely different. Did the next episode (ie last night's Falling Skies) appear in the Scheduled Tab at all and fail to record or didn't it put it in after last week's episode?
    is correct in that it is up to the channels themselves what constitutes a series. For example, it is the BBC who has decided that the new Top Gear specials being shown are not part of the aborted series, so Sky boxes won't have picked them up automatically.

  • I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the "  " sign in front of them

    I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the " " sign in front of them

    I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the "+ " sign in front of them

  • Adding phone layout to existing desktop site - No scratch page created

    Trying to make a phone version of site created in muse but no scratch page is created in desktop plan after adding phone layout. Ideas?

    I'm following adobe help tutorial  http://helpx.adobe.com/muse/tutorials/creating-mobile-layout-designs-muse.html#id_25691htt p://
    Under heading "Adding Phone Layout to Existing Muse Site"  #3 starts refering to "scratch page"

  • Adding new data to update multiple series in charts - in one action

    I would like to know how to update a data series range in a chart all at once as can be achieved with Excel by
    manually entering row numbers to expand the data series range or
    by dragging a reference frame in a table to include additional data in the range.
    At present, the only way that I have discovered I can update a series is to manually change the cell reference detail for each series individually. This is achieved by selecting a single line and clicking several times on the Data reference cell in the Inspector Chart option by highlighting the cell reference details and then manually changing the cell reference for each series separately. This is tedious, time consuming and more than a little clumsy! What used to take me a few minutes to update my charts in Excel is taking me tens of minutes in Numbers.

    theguardian wrote:
    I would like to know how to update a data series range in a chart all at once as can be achieved with Excel by
    manually entering row numbers to expand the data series range or
    by dragging a reference frame in a table to include additional data in the range.
    Unless I'm misreading this, similar techniques work in Numbers.
    The original table contained only the sequential labels in column A and the data shown on the upper chart.
    I made two changes, similar to those in your list (but in the opposite order, hence the reversal in my numbering):
    2. Added data to cells B11:B15 (labeled J-N). (The data added is a copy of the first five data from the original series.) Selected the chart, then expanded the data series by dragging the control (small circle) down to include these cell (plus B16) in the charted range. The chart updated to include this data.
    1. Selected B11:B15, then went Table > Add Rows Below (keyboard shortcut: option-down arrow). Numbers added five rows to the table, and updated the chart to include those rows, as shown in the lower version of the chart. Paste the data into these new rows to add it to the chart.
    Although I had selected rows inside the charted range when adding new rows (to keep that "O" label on the x axis and show the 'space' before it), the five rows could as easily have been added to the end of the chart. Select B12:B16, press option-down arrow.
    Regards,
    Barry

  • Add series to existing chart

    I have a chart in its own sheet. The chart has one series from another sheet. I'd like to add a series from yet another sheet, but can't figure out how. I can't drag the new series to the chart... thoughts?

    From the user's manual:
    To add a chart based on data in more than one table, first select a single table or
    contiguous range of cells and create a chart, then click Charts in the toolbar, and
    choose a chart type. Select the chart and hold down the Command key while clicking
    or dragging cells in another table to add their data to the chart.
    Whoops, that won't let you choose from different sheets, just different tables on the same sheet.
    Maybe there's an easier way but what I found would work is to create the chart in the first sheet then cut and paste it into the other one so you can select the second set of data.
    Message was edited by: Badunit
    Message was edited by: Badunit

  • Adding tv tuner to dv5 1000 series

    what you need to add the internal tv tuner to a dv5. I used a dv5-1132us
    1. ability to completly dissasemble the unit.
    2. DC370000V00 antenna cable (listed for a dv7 on ebay)
    3. an avermedia tuner card i used an A317. at least in the united states make sure you get an atsc card not just analog
    4. external adapter to connect to coax 407342-002 
    dissasemble unit. remove plug for antenna connector from right side of case.
    install internal connector cable
    reassemble unit
    install tv tuner card
    install driver. i installed an incorrect driver then used windows update to get the right one.
    connect tuner to ether cable, or antenna
    use media center or hp media smart live tv
    i could not get hp's remote to work with media center. but it did work on media smart

    kewl, but does your tv turner card detect in the bios setup, mine only detects in the device manager, like hp atsc, or unknown device to errors but windows 7 says unknown device can't find any drivers,???

Maybe you are looking for