Adding mac in Windows 2000 domain

Hello, I need add a mac OS 10.3.9 in a windows 2000 domain,
for sharing files and printers. Is possible??
Thanks, Diego

Hi dbeihswingert try these documents
http://www.wazmac.com/wazza/networking/networkpages/basic_sharing/networkintegration.html
especially
Macs to a Win Domain (pdf - 250k)
Configure OSX 10.3.3 so Macs can authenticate with Active Directory, and store their home folders on a Windows 2000/3 server.
I have found this to be a good resource.
Cheers.

Similar Messages

ISE with per-windows 2000 domain

Hi
I am experiencing a problem with AD authentication.
I have joined the ISE appliance to the windows AD and I can browse the groups and attributes.
But the problem I am experincing is that the users logon to the domain using the pre-windows 2000 domain name.
FQDN format : ab.cdef.com - ISE is joined to this
pre-windows 2000 name : abcd - Users logon with this
So wen the users authenticate I get the following error : 22056 Subject not found in the applicable identity store.
Also tried to logon with [email protected] with no luck.
Does someone have any suggestions?
Thanks

The 802.11 Mac Layer is a bit longer than the ethernet mac layer. This sometimes cause problem with domain login because they are done using UDP by default. The frame are sometime drop. To test if this is your problem, I recomand changing the MTU on the 2000server(DC) and the host to something lesser than the actuel MTU on the interface. (configure the DC and host @1300 leaving the network @1500)
A Windows 2003 server as a default mtu of 13?? something to get around this problem. I usaully tell my users to install the cisco vpn client if they want to use domain in wireless because the installation of this client lower the MTU of every interface to 1300.
Another path you can look into is forcing kerberos to use TCP insted of UDP. (look on MS TechNet for method)

Joining a Windows 2000 domain

Can I join my Sun Solaris 8 server running Samba to a Windows 2000 domain so that all the users that logon or use shares will authenticate thru the domain controllers with their Win accounts?
I dont want to create 1500 Solaris accounts.

there is a sun product called Sun PC Net Link that could help you
synchronazing user accounts in Windows env. and Solaris
you can map the accounts from one env. to the other.
we use this product since many years and have migrate fm
windows NT to Windows 2000 Terminal Server without major
problems, including user maps.
good luck ...
[email protected]

How can i run AirPort Express for both a Mac and Windows 2000 SP2?

I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?

Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
They were running XP SP2.
Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
Good luck
susan
iBook G4 Mac OS X (10.3.4)

Different Pre-Windows 2000 domain and FQDC.

I have a SBS 2003 box that was originally migrated from SBS2000. i just finished install new 2012 standard server and installed AD service on it, but when i trying promote to DC, it won't do it until functional level raise to least 2003 level.
My question is following:
when user login, user uses pre-windows 2000 login name.
For example, DC11\user but FQDC is DC1.local. we have no DC11 exist.
When user trying login as DC1\user, it won't able to login. even Administrator has to login as DC11\administrator not DC1\administrator.
When i look user properties account login name user @dc1.local and pre-Windows 2000 name DC11\ user are listed.
if i raised to Windows 2003 function level, did user can't login? or any effect?
Thanks

DC11 is the NetBIOS name of your domain and it can be changed using Active Directory Domain rename tools -
http://technet.microsoft.com/en-us/windowsserver/bb405948.aspx - if you don't want to use DC11 in your environment. However, this could have impact other applications like Exchange,
as Exchange doesn't support domain rename.
Another option for you would be to deploy a new Forest or domain with the names that you desire and migrate stuff - Users/Workstations/Servers/Application and get rid of old domain.
UPNs ([email protected]) is easy to change but changing NetBIOS is a complex process and needs to be done with extreme care.
- Sarvesh Goel - Enterprise Messaging Administrator

JAAS - Kerberos - windows 2000 domain - groups

I need to find out if a user is in 2 different groups. If they are in group a, I display results a.m. If they are in group b, I display results b.n. If they are in a and b, then I display a.m union b.n. Any ideas?
I am validating the user through kerberos already. Windows NT domain says they are valid if correct username/domain/password are enterted. Now I need to find out if they are part of a group on a domain. Any ideas? Am I making sense. Mail me at perry2of5 at yahoo.com if you need clarification or have ideas and don't want to post here.
I suspect i need to use the subject from the original login and ask for access to the group, but I don't know how to do this. Help!

I've a very simular problem (maybe even simpler).
My webapp (Struts) is running on a Tomcat and the user login has to be proofen against a Win2000 active directory server. If login is successfull I'll need the users roles from the W2k ADS. That's it.
What I know till know:
- authentication uses Kerberos
- communication with ADS uses LDAP
Has anybody an easy solution (example). I've already read all the JAAS stuff from Sun, but I'm still not sure how to implement it.
Thx, Chrise

I have a MACbook Pro that needs to be added to my Windows .LCL domain. Everytime I try to add, it says it cannot authenticate. Any Idea why??

I have a Mac book Pro that I have been trying to add to ourmWindows 2008 Sever on our .LCL Domain to the Active Directory. Everytime I try to bind it, it says Authentication failed. I am a Net Admin, and have appropriate permissions. I created the computer name in Active Directory, and named the MAC the same name. I have tried to do this using both Static, and DHCP IP's. ANyone know what I should do??

I have the same problem, anybody? please help!

Windows 2000 user account migrate to new Windows 2012 R2 domain

Hi all
I have a customer using Windows 2000 domain with many user accounts and file share service.
Now they want to use a new Windows 2012 domain without upgrade from old 2000 domain due to some hidden problem.
Customer requested to keep user name, password, uid for existing file share access.
May I know any tools for migrate user account from Windows 2000 domain to Windows 2012 domain?
thx
Q K

Hi,
Can you please confirm your requirement, that is you will be using a new Windows 2012 domain with only the user accounts from Windows 2000 domain.
If the above text matches your requirement, I would suggest you the following steps,
1. You can use CSVDE - command line tool to export the AD user information as CSV file from Windows 2000 domain,
http://www.techrepublic.com/blog/data-center/simplify-admin-tasks-by-exporting-active-directory-data-with-csvde/
2. Then, you can import the CSV file with required user attributes (domain details modified according to the target domain) to Windows 2012 domain using PowerShell as
shown in the link given below,
http://blogs.technet.com/b/bettertogether/archive/2011/01/09/import-bulk-users-to-active-directory.aspx
Regards,
Gopi
www.jijitechnologies.com

10.4 and Windows 2003 Domain

Hello,
We're a 40% Mac environment where all the Macs are bound to our domain and users log in with Mobile accounts. When we first decided to do this, all the Macs played very nicely with our Windows 2000 domain.
About three months ago, we upgraded our Windows 2000 domain to a Windows 2003 domain and began enforcing stronger password security. Now all of the Mobile accounts on all of our 10.4 machines refuse to let the users change their passwords. Doing so through the Log In window when a password expires does not work. Neither do the controls in System Preferences/Accounts. Neither do the controls in the Kerberos app. It sits and pinwheels for a few minutes, then returns an error about not being able to change the user's password to the password specified.
I tried adding myself to a few of these computers as a Mobile user and then changing my password, but that didn't work either. So it isn't something held over in the user accounts from the old domain, and it isn't a permissions thing since I'm an administrator on the domain.
I've dumped all the Directory Access preferences files. Doesn't help.
Sometimes this behavior can be fixed by unbinding a machine from the domain, deleting the computer's account in Active Directory, then rebinding it to the domain. Lately, that fix has stopped working, and if I remove a machine from the domain, I cannot rebind it to the domain unless I do so using a different computer name - even though the computer account in Active Directory has been deleted.
Mobile accounts on all of our 10.5 machines can change their passwords without a problem.
I'm stumped. Anybody got any brilliant ideas? Information on Macs interacting with Windows domains is pretty scarce.

Hi Scott, and a warm welcome to the forums!
What Workgroup do you have set on the Mac in Directory Access Utility?
See if these 2 links help also...
http://www.macosxhints.com/article.php?story=20050302023720578
http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x

Mac to windows nt

Hi,
Newbie poster.
I have a IMac connecting to a windows NT domain. All is well for 5-10 minutes then the NT account (used for drive mappings) is locked out from the NT side - any ideas?
Other Mac Pro's accessing a windows 2000 domain have very few problems.

The problem may not necessarily be the iMac itself but the user account on the iMac. Most likely, the person connecting from the iMac to the server with his NT account has stored some passwords in the Keychain. Have your user log in to the iMac, if necessary, and then delete his login.keychain file found in his home folder at ~/Library/Keychains/. Then restart the computer or just have him log out and log in again. After that, have him connect only to the NT server and test whether or not the account gets locked.
Ask the user to not store his password if prompted.
I would suspect part of the problem is the two domains—not that they're set up improperly but that the user may have the same user account name in both domains. If he's use to entering the same name but having two passwords this may lead to the iMac trying to keep track of two accounts but thinking they are the same account.
Are these domains trusted? Does the user with the account getting locked have one login between the two domains or one login for each domain?
bill

Javac "error: cannot read ..." windows 2000

I have installed jdk1.4.1 on my ibm with windows 2000. Whenever I try to compile a program, I get the message "error: cannot read: filename.java 1 error" Please let me know where I am making a mistake. Thank you.

No, you place the "" around the name when you save it. This prevents the .txt from being added to the name. This won't allow it to be compiled. I "solved" the problem another way by saving it with All Files and I type in filename.java. This works fine, but I do wonder why the .txt is added on my Windows 2000 machine, but not my Windows XP machine.

OS authentication w/ 10.2 database and Windows 2000

Not a new issue - but still not too easy for me...
Got a Windows 2000 domain, a 10g enterprise database server on Windows 2003 as part of this domain and a client machine running a 10.2 client on Windows 2000 in the same domain.
remote_os_authent is FALSE.
OS_AUTH_PREFIX_DOMAIN is not set.
On both sides sqlnet.ora contains the line SQLNET.AUTHENTICATION_SERVICES= (NTS)
A database account exists as <domainname>\<username> with create session priviledge granted. <domainname> is the same as Windows' %USERDOMAIN%. <username> is the ID to which one logs into that domain on the client machine.
But still "sqlplus /" raises exception 01017. Password authenticated connects do work. What am I missing?
Thanks a lot..

Assuming it still doesn't work: sorry no, as I recall this info from a Metalink note, and the Metalink note worked for me. The only thing I can remember right now is one needs to enclose the Oracle account in double quotes, or it wouldn't work, due to the \. If that also doesn't help, I'm stuck.
Sybrand Bakker
Senior Oracle DBA

User Logon Name (pre-Windows 2000) and Domain Name Don't have the same Value

Hi
is it possible to have User Logon Name (pre-Windows 2000) and Domain Name with different value?
Exemple:
domain name domain1.com
and User Logon Name (pre-Windows 2000) Domain2\user

If you have trust in place, then also you can use trusted domain name to login from trustee domain. Also, UPN suffix can be added.
http://technet.microsoft.com/en-us/library/cc773178%28v=ws.10%29.aspx
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Printing from windows 2000 to mac os x

Hi,
I have a Printer (HP PSC 1510 allinone) connected and working from a G4 imac running Mac OS 10.4.10. Window sharing and Printer Sharing are both running. I would like to print to this printer from a PC laptop across a wireless network. The PC is running Windows 2000 pro.
I can log in to the imac and share files, the printer is also displayed. Drivers are installed on both computers and i have added the printer as a "network printer". When i try to print from word on the laptop the document seems to just evaporate in transit.
Is there a sure way to print from this setup that anyone knows?
thanks in advance

its
http://192.168.0.3:631/printers/iP4200
windows responds with:
"Could not connect to the printer. You either entered a printer name that was incorrect or the specified printer is no longer connected to the server. Click Help for further information."
The address is correct of course.
I tried this method because Bonjour printer setup throws the ghastly
"You do not have sufficient access to your computer to connect to the selected printer." every time in Windows 2000 as well despite the fact that i'm logged in as administrator on both machines. I'm wondering if this is a permissions problem but where?

Domain problem still persists -9iAS installation on windows 2000 profto do?

Hi
I tried installing 9iAS rel 2 on Windows 2000 prof.
As per the pop-up during installation I did the changes. I did the changes as per the instructions. In the "hosts" file
c:\windows\system32\drivers\etc\hosts
I added
127.0.0.1 <my computer name>.WORKGROUP
So the resultant details in hosts file were
127.0.0.1 localhost
127.0.0.1 <my computer name>.WORKGROUP# my entry
IT DID NOT WORK THIS WAY TOO..
So I tried with a space instead of a "."
127.0.0.1 <my computer name> WORKGROUP# my entry
THIS ALSO DID NOT WORK..
Please help me.

see original post :)

Adding mac in Windows 2000 domain

Similar Messages

Maybe you are looking for