Adding memory to an existing LDOM

Dear All,
Is it possible to add memory to an existing LDOM online. If yes, please provide the procedure.
Also, provide the procedure to do it offline.
Regards,
Harpreet Singh

You will need to reboot the Guest Domain to see the additional memory. It's called delayed re-configuration. You can only move MAU's and CPU's while the Guest Domains are online, maybe in the future memory will be included.....
Have a look at the following command:
ldm add-memory

Similar Messages

I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new Ipome and Ipad. and Ipad. Now I'm told I need to upgrade my operating system. The apple store gave me conflicting instructions. Any suggestions? Thanks

I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new IPhone and Ipad. Now I'm told at the apple store that I need to upgrade my operationg system. They said they couldn't help and gave me conflicting advice about what to do. Any ideas? Thanks you!

There are three models of MacBook that comprise the 'macbook 4.1' category, and each of them a little different; however other than 'macbook 4.1' the other thing they have in common is they all are considered Early 2008. Two are white, one black, polycarbonate case, Core2Duo 2.1GHz, 2.4GHz white, 2.4GHz black.
So if you can determine which one, if any of these, is the model build year and spec you have, that would be handy. Did you tell whoever you spoke to the serial number of your computer, so they'd know by looking up the specs to see what the supported maximum RAM upgrade capacity was, and other minimum requirements to make any upgrade to Mac OS X 10.6.8 at all?
If you have the serial number you can do a lookup to 'indentify by serial number' online, and use that information to determine if the computer needs even more RAM to take it past the minimum for Snow Leopard 10.6.8 and then get it ready to upgrade (via paid download from App Store, Snow Leopard gets you that far) and see what the next supported OS X full upgrade would be for the hardware limitations on that old MacBook.
If your MacBook IS a 4.1 build, the highest OS X it could run if it has the 2.4GHz cpu, is Lion 10.7.5. That would be an upgrade from the App store, available to OS X 10.6.8+ computers that access it online. And I kind of doubt how supported a newest iphone etc may be in lion.
everymac.com has a fair amount of information across many years of Apple computing hardware...
Here's the three MacBooks that share the 4.1 designation; first shipped with as much as 1GB RAM upgrade and the other two only a 2GB RAM*, (one white/one black color) according to this information...
• MacBook "Core 2 Duo" 2.1 13" (White-08) 2.1 GHz Core 2 Duo (T8100)
• MacBook "Core 2 Duo" 2.4 13" (White-08) 2.4 GHz Core 2 Duo (T8300)
• MacBook "Core 2 Duo" 2.4 13" (Black-08) 2.4 GHz Core 2 Duo (T8300)
...as seen here: http://www.everymac.com/systems/apple/macbook/index-macbook.html
*But according to MacTracker (free: download database) http://mactracker.ca
these MacBooks can use more RAM in aftermarket specs as much as:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
To get more information use a service such as this...
•identify by serial number:
http://www.powerbookmedic.com/identify-mac-serial.php
The Apple? store or whoever you talked, to may have been as accurate as they could be without further research. Could be you may have a newer or older MacBook, which would change whatever later OS X it could run past 10.6.8. And to go past Snow Leopard, you need to download the last bits for 10.6.x to be able to go and get any later upgrade. The ones that may let a newest iphone or ipad work with it, are past SL10.6.8
Anyway, as you further verify the model build year and configuration specifications, report back.
Good luck & happy computing!

Issue in adding Space to the existing Virtual Machine from added repository

Hi,
I'm facing issue in adding Space to the existing Virtual Machine (Guest OS) from added repository.
Environment details :
VM Server : /OVS => 130GB
/OVS/935970F2CC2D4B4391701397517F1001/ => 512 GB
Things I have done :
•     I created a VM (Guest OS) in the VM Server with 120 GB
•     After creating the VM (Guest OS) , When I tried adding a VIRTUAL DISK of size 150 GB , I got an error “Maximum available Disk space is only 10GB”.
My query :
•     Will I be able to add space to Existing VM from the added Repository ( /OVS/935970F2CC2D4B4391701397517F1001/ ) , whose system.img is stored in path /OVS/running_pool/34_rhel/ .
Kindly help me out in this.
Thanks in advance.
-- Sri

Hi all,
I checked with Oracle on the above and got the info currently , the we can utilise only the space available in the existing repo and cannot extend to additional repo.
Work around is : Clone it to the other repo , or Use Symbolic link .
Thanks,
Sri.

Laserjet 6p added memory unknown???

I have a 6P and it has an installed memory card on one of the 3 available memory slots.I can not tell what the size of the memory card is and called the manufacturer who said that its model number is no longer available in their database. I held down the printer button and got the LaserJet 6P printed page but it says "PLC6 MEt Memory Enhancement technology 2 mbytes". I believe that is the internal installed memory and doesn't include the added memory card. Is there anyway I can determine the size of this added memory card? Also, when I print PDF files, it takes a very long time for each page to print...maybe a minute per page. If I switch to Raster, then the pages print normally. Any ideas on this issue as it only happens with PDF files that I have to print. Win7 Ultimate 64bit. using the Win7 print driver for HP LaserJet 6p.

Thanks for the additional info. As far as being confused...the only two options I have in the graphic mode is HP_GL/2 or Raster so I don't know why they are on my LaserJet if they are not suppose to be.I'm not sure what driver I am using...when I print out the test page it says PCL6 so I guess that is the driver installed. There is no other place that tells me that I can find. When I go to HP support there doesn't appear to be a way to get PCL5 as it refers me to Windows for printer drivers on my model.I guess I'll just have to remember to switch to Raster each time I do a PDF file.Thanks for all your help.

Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches

Once I connected my new server to my farm's config db, it returned all of the following missing locally. I stripped out any redundancies and Headings, and I'm left with 43. I'm looking for a efficient strategy. Should I start with the lowest version number
and work my way up? Current DB version is 14.0.7015.1000. IIRC, SP2 is cumulative, so can I ignore the first two (SP1 and Hotfix), install SP2, and then the Language packs and etc on top?
Sorted by version:
Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000)
Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition (14.0.7015.1000)
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition (14.0.7015.1000)
Microsoft Office Server Proof (English) 2010 (14.0.7015.1000)
Microsoft Office Server Proof (French) 2010 (14.0.7015.1000)
Microsoft Office Server Proof (Russian) 2010 (14.0.7015.1000)
Microsoft Office Server Proof (Spanish) 2010 (14.0.7015.1000)
Microsoft SharePoint Portal (14.0.7015.1000)
Microsoft User Profiles (14.0.7015.1000)
Microsoft SharePoint Portal English Language Pack (14.0.7015.1000)
Microsoft Shared Components (14.0.7015.1000)
Microsoft Shared Coms English Language Pack (14.0.7015.1000)
Microsoft Slide Library (14.0.7015.1000)
Microsoft InfoPath Forms Services (14.0.7015.1000)
Microsoft InfoPath Form Services English Language Pack (14.0.7015.1000)
Microsoft Word Server (14.0.7015.1000)
Microsoft Word Server English Language Pack (14.0.7015.1000)
PerformancePoint Services for SharePoint (14.0.7015.1000)
PerformancePoint Services in SharePoint 1033 Language Pack (14.0.7015.1000)
Microsoft Visio Services English Language Pack (14.0.7015.1000)
Microsoft Visio Services Web Front End Components (14.0.7015.1000)
Microsoft Excel Services Components (14.0.7015.1000)
Microsoft Document Lifecycle Components (14.0.7015.1000)
Microsoft Excel Services English Language Pack (14.0.7015.1000)
Microsoft Search Server 2010 Core (14.0.7015.1000)
Microsoft Search Server 2010 English Language Pack (14.0.7015.1000)
Microsoft Document Lifecycle Components English Language Pack (14.0.7015.1000)
Microsoft Slide Library English Language Pack (14.0.7015.1000)
Microsoft SharePoint Server 2010 (14.0.7015.1000)
Microsoft Access Services Server (14.0.7015.1000)
Microsoft Access Services English Language Pack (14.0.7015.1000)
Microsoft Web Analytics Web Front End Components (14.0.7015.1000)
Microsoft Web Analytics English Language Pack (14.0.7015.1000)
Microsoft Excel Mobile Viewer Components (14.0.7015.1000)
Recommendations?
Thanks,
Scott

Thanks guys. I was able to get through all of the patches except for
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - English missing locally
Language Pack for SharePoint, Project Server and Office Web Apps 2010 -
Spanish/Español missing locally
This was my process:
Config Wizard:
Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches.
SKIP installing the following two, as SP2 is cumulative
Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000) (officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe)
Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe
install oslpksp2010-kb2687462-fullfile-x64-en-us.exe
Got "There are no products affected by this package installed on this system."
SO!
Uninstalled Sharepoint 2010 Server
WIll try to install again, without skipping #2, and reorder installation of oslpksp2010-kb2687462-fullfile-x64-en-us.exe
Retry (the long way):
Run SharePointServer.exe, get Missing Locally...
Install oslpksp2010-kb2687462-fullfile-x64-en-us.exe SUCCESSFUL
Install officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe SUCCESSFUL
Reboot
Install oserversp2010-kb2687453-fullfile-x64-en-us.exe SUCCESSFUL
Rerun Config
STILL MISSING
Download oslpksp2010-kb2687462-fullfile-x64-es-es.exe, run, "there are no products affected..."
Uninstall.
Re-retried, only got through the first couple:
Run SharePointServer.exe, get Missing Locally...
Install SP1 officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe, SUCCESSFUL
Install English Lang Pack oslpksp2010-kb2687462-fullfile-x64-en-us.exe, "There are no products affected by this package installed on this system."
Install Spanish Lang Pack oslpksp2010-kb2687462-fullfile-x64-es-es.exe,
Install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe, run Config Wizard
I'm now downloading 462150_intl_x64_zip.exe, going to try and install it as step three.
Any suggestions greatly appreciated.
Thanks,
Scott

Added Memory, but not showing up in System Profilier

I have an iBook G4 1.2Ghz/12-inch screen laptop. Bus speed 133 MHz. It has 256 MB built-in memory. I added a stick of 512 that is appropriate for this computer. (PC 2100) It is seated correctly, and the clips are in place.
However, when I go to the System Profiler, it still only shows my Built-In Memory, and shows that the DIMM1/J7 Memory slot is Empty.
Is there something I need to do to get my computer to recognize the added hardware?
The odd thing is, my computer really does seem to be using the added memory, as I can now have multiple applications open without slowing or freezing.
Thanks,
Sonya

You are correct. When the Mac starts up it checks for RAM, no configuration needed on your part. I would suggest taking the chip out and putting it back in to make certain it's pushed in correctly. It should actually "snap" or "click" softly into place.
-Doug

Upgrade to 10.4.11 (from 10.3) & adding memory.

I was wondering if anyone could/can help. I recently upgraded my OS and added memory to my woefully out of date G4. For some reason I now cannot see an external harddrive (firewire) nor can I see my Ibot webcam. When I go to my Hardwear Overview and click on Firewire: nothing appears.
Here's my system info:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
Memory: 1.5 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.3.3f2
Is it possible that the upgrade/additional screwed up my firewire capabilities? If yes, what do I do to fix it?
Here's hoping someone can help.
The Mouse

A quick question b4 I plod through these (thank-you very much)......should something show up in my system profiler under Firewire. When I click on it it's blank. I also saved off a file from the profiler and this is what comes under Built-in Firewire:
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address:
Media Options: Full Duplex
Media Subtype: autoselect
Thanks again will keep you posted.
The Mouse

InDesign CC 2014 version adding pages to an existing document keeps crashing, why?

InDesign CC 2014 version adding pages to an existing document keeps crashing, why?

Because there's a problem in the file. See Remove minor corruption by exporting

I added memory to my MacBook Pro (now 4gb) and upgraded to Lion. Now my iphone 4 won't sync-gets stuck at stage 7 of 8 on importing photos. My iphoto is'09 version 8.1.2

I recently added memory to my MacBook Pro so I could upgrade to Lion and use the cloud for my contact list. It's been a bit of a mess, since I use Entourage as my email program. The REAL problem I'm having now is that my iPhone 4 now won't sync. iTunes "quits unexpectedly" at stage 7 (of 8) in the syncing process, where it says it's importing photos. My iPhoto is '09, version 8.1.2 Is this not compatible with Lion?

I have the same problem. I'm suspecting a corrupt photo, but the logs don't give me a clue. Or maybe this version of iTunes needs some further tuning.

Adding portal to an existing domain

Hi I have a JSP/Servlet web applicatin and
I want to make it a portal application.
I was following Weblogic Portal Development
Guide 7.0. I found the section
"Adding portal to an existing domain" is very incomplete
or confusing and I cannot do it. Is there any better document
for this?

Judging from the dates between these two entrries and no answers, I'd
guess that there isn't anyone from BEA monitoring this group? I am in a
similar situation. What I want to understand is how one can "portalize" an
existing web app. I understand there are implications to some of the
presentation, but specifically, I want to deploy a Servlet based app that
uses EJBs and deploy this as an EAR in the same domain as the portal
(perhaps under the /applications directory). I can make everything work
except the webflow where I reference the Servlet.
Specifically, I have a presentation page that is defined to be my servlet.
When I try to build a webflow URL referencing this event, I get errors from
the portal because it presumes it may be located somewhere else or in a
different namespace. It leads me to believe that I can't reference a
servlet unless it is under the /framework or /portal directories under the
portal web-app directory. I'm convinced there must be a way to reference
other web components that aren't specifically part of the portal web app,
but can't figure out how to propagate the webflow element to the actual
servlet I want.
Any ideas from the community at large? This must be something other
people have wrestled with since I can't imagine that only new apps will be
put into portals.
Thanks,
Mark
"Sara" <[email protected]> wrote in message
news:[email protected]...
>
I'm facing similar problems too. I have an ear file in an existing domainthat
I want to use to create a portal. The documentation on this is quiteconfusing
and the steps require so many manual steps that it is bound to beerror-prone.
What's BEA's recommended way to expose an existing Weblogic application asa portal
Thanks in advance
-Sara
"David Zhang" <[email protected]> wrote:
Hi I have a JSP/Servlet web applicatin and
I want to make it a portal application.
I was following Weblogic Portal Development
Guide 7.0. I found the section
"Adding portal to an existing domain" is very incomplete
or confusing and I cannot do it. Is there any better document
for this?

Adding replication to an existing database.

I am looking at adding replication to an existing database. This database has lots of existing containers many of them are 1G in size. How will this be handled when the master and client initially start? Will the master just start sending to the client? Is there another option?

Yes. This, and the alternatives, are described in the Ref Guide, on the page entitled "Initializing a new site".
Alan Bram
Oracle

I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the " " sign in front of them

I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the " " sign in front of them

I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the "+ " sign in front of them

Threat Feed say my ipad2 got threats, memory corruption vulnerability exist, which could lead to remote code execution. How to solve this problem?

Threat Feed (McAfee) say my ipad2 got threats, memory corruption vulnerability exist,
which could lead to remote code execution. How to solve this problem?

You can't solve this problem yourself. You would need to wait for apple to release a "fix" or for McAfee to revise their judgement.
If you're worried about the threats, don't do things that would expose yourself to the vulnerability that they describe.
Since I can't see what you're looking at, I can't give you any other advice.

Added memory

I would like to have any info you guys can give on adding memory to Set top box. Am I looking for a seats hard drive? How many gigs of memory are needed or available for this addition? Any info would be appreciated

On my recent post>>>I meant to say I want to add an external hard drive and what I've read is, My Motorola HD DVR QIP 7216 1 is supposed to be compatible with an eSata hard drive. Is this correct? I've looked in the back of my STB and it has a slot for a Sata connection. Is this the same as eSata? If anyone can give me some info I'd appreciate it. Also...how difficult is it to configure?

Adding phone layout to existing desktop site - No scratch page created

Trying to make a phone version of site created in muse but no scratch page is created in desktop plan after adding phone layout. Ideas?

I'm following adobe help tutorial http://helpx.adobe.com/muse/tutorials/creating-mobile-layout-designs-muse.html#id_25691htt p://
Under heading "Adding Phone Layout to Existing Muse Site" #3 starts refering to "scratch page"

Adding memory to an existing LDOM

Similar Messages

Maybe you are looking for