Adding more disk space Macbook Air 2013

So I bought a 256 GB Macbook Air awhile back, thinking it would be more than enough space. However, my media content and applications have been growing.
The ideal solution would be to be able to use a 64 GB SD card in the slot of the air for media, however I've heard this is a bad idea for some reason. Is this really a bad idea for extending the storage? It seems like it would work fine but I'm not sure about the technical aspects involved. Is there a particular kind of card that's better to use (SDXC, etc.)
The other solution is to use an external HD for media, but I've had issues with one's in enclosures crapping out. Since I travel a lot, I suspect it may have something to do with voltages or being jostled around in luggage.
The other option is cloud storage, however I'm not too fond of this except for long term archives of really old stuff.

OWC has add-ons for 2012 and earlier machines but nothing ready for retail for the 2013s (yet)
http://eshop.macsales.com/shop/SSD/OWC/
I would say just be smarter about your media especially movies and TV shows. Do you really need them with you at all times? Or, if a new trip, download what you want to watch and delete it after you're finished.

Similar Messages

  • "Insufficient Space" error preventing app download from App Store for MacBook Air 2013

    Hi,
    I am using a MacBook Air 2013 model with OS 10.9.4 (Mavericks).  It has a 120 GB HD with about 17 GB of free space.
    I am unable to download from the Mac App Store as I get an 'insufficient space available" error whenever I try to purchase a larger App (> 2 GB).
    After looking through the forums I can confirm the following:
    - Both the Finder and "About This Mac" report that 16.5 GB of space is available.
    - I have toggled Time Machine and restarted my computer with it "On" and "Off".
    - The application description does not mention needing more space for installation (specifically I am now trying to download BioShock 2 which needs about 9 GB).
    I tried to contact Apple Support for the App Store and they informed me it was a hardware issue.  I do not have Apple Care and do not think this is a hardware issue so would rather not pay the 20$ for support.
    Cheers,

    If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
               ▹ System Preferences... ▹ Time Machine
    If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Restart the computer. Test.

  • I can't no more receive call on my MacBook Air 2013.

    I can't receive incoming call on my MacBook Air 2013.
    This mornig, when i'd upgraded my Mac all was fine and the incoming call were visible on screen.
    Now I can only make call from Mac, and also FaceTime works well, but I don't see incoming call.
    The change I made was to upgrade Java and VMware.
    Thank for attention.

    As has already been pointed out both iWeb and iDVD will not be pre-loaded, however, you can still purchase both iWeb and iDVD by going to the Apple Store online and purchasing the iLife 11 boxed set that does contains both iWeb 09 and iDVD.  You can get it from Amazon too.

  • Macbook Air 2013

    I just got myself a new Macbook Air 2013 and while I realized I couldn't expect the smoothest experience, I never expected this much hassle with it. So many differnet issues. No need to have a sad face about it, though - let's get together and figure out how to make this work! At least we only have one graphics chip to worry about this time around
    This is going to be a pretty long post but I figured it's good to have it all in one place. Please correct me if you think this is the wrong way to post these things.
    Installing and booting
    Booting from a normal 2013.6 USB key works fine, but I couldn't seem to get either GRUB or Syslinux working.
    I was able to boot by first installing Arch Linux following the Macbook guide at the wiki (having a separate FAT32 /boot partition). Skip the bootloader installation.
    Installing rEFInd from OS X (important!) and installing the EFI stub loader made me able to boot fine.
    Separate thread.
    Stability problems
    This is the big worry for me. Every now and then my system hangs for a brief moment and everything involving net or disk access just hangs there for a while and then it seems to work.
    So far it only seems to happen when I run something disk- or CPU-intensive. Also had an occassion when I couldn't start X and just got this repeating all over my screen:
    ata1.00: failed command: WRITE FPDMA QUEUED
    ata1.00: cmd 61/08:f0:10:8c:c2/00:00:0b:00:00/40 tag 30 ncq 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    ata1.00: status: { DRDY }
    On the next attempt it worked fine.
    I did SMART short and long tests on my disk and they returned fine:
    smartctl -a
    There are some messages in my boot that indicate this could be disk and/or ACPI related.
    journalctl -b
    dmesg
    This was on a boot when my NIC was renamed from eth0 to wlp3s0 as noted under Wifi - this should hopefully not be a big deal to fix. Will update when I look more into it.
    uname -a:
    Linux temperance 3.9.7-1-ARCH #1 SMP PREEMPT Thu Jun 20 22:45:32 CEST 2013 x86_64 GNU/Linux
    WiFi
    WiFi does not work out of the box. Installing wireless-bcm43142-dkms from AUR made me able to connect to my network. I haven't been able to get it stable yet -interface name changes randomly between wlp3s0 and eth0 between reboots and I get disconnected from my network every 30 minutes or so. Disconnects seem to correlate somewhat with the freezes mentioned above.
    Separate thread.
    Touchpad
    Have only been able to get it to work like a one-button mouse using evdev for now. Looks like an upstream bug.
    Separate thread
    Audio
    In order to get audio, I need to put the following in /etc/asound.conf:
    defaults.pcm.card 1
    defaults.pcm.device 0
    defaults.ctl.card 1
    I'm no ALSA pro, but I can only seem to get output from the headphone jack so far - no speakers yet.
    Last edited by Legogris (2013-06-27 20:21:11)

    While I'm using Ubuntu and not Arch, I wanted to chip in with my experiences.
    First, I am happy to tell you that I've found a fix for the ata errors/freezes (which for me were so bad I could hardly install) -- at least I think it's the same or related. I got udevd spitting errors about blkid timing out, and it couldn't find the disks. I found this in a Ubuntu forum -- sadly, I can't find the url now. Anyway, Pass
    libata.force=1:noncq
    to the linux kernel parameters (in Ubuntu you can add this to /etc/default/grub). This disables NCQ, which according to that post wasn't needed.
    YMMV and I am not certain that it doesn't have bad side effects, but for me it made the laptop usable.
    Other findings:
    My Fn key, and thus delete, page up/down, media keys etc didn't work. That's because the keyboard has a new device id which isn't in usbhid. I added entries like the existing apple keyboards with the new device id (05ac:0291) and after recompiling, it works. I'm pretty sure this is fixable by passing the correct "quirks" flags to the usbhid module, e.g. "quirks=0x05ac:0x0291:0x00001248", but I'm not sure which flags should be set (I have an ISO keyboard layout which is yet another flag).
    My sound card doesn't work. Or; i hear no sound at least ;-). After checking in alsamixer, it had two cards, one HDMI with S/PDIF only and one with analog in/out and digital in. I tried passing "index=1" to snd_hda_intel, which makes alsamixer pick up the right card by default. I'm not sure if the problem is that pulseaudio still has the wrong card, or something else.
    My wifi works after installing bcmwl from Saucy (i.e. the upcoming Ubuntu 13.10 release), which was a relief because I feared this not being supported.
    Sometimes after resuming from suspend, the screen is totally dark -- barely discernible in bright daylight. First I figured this was an issue with lightum (a daemon which monitors the lighting and adjusts keyboard and screen brightness), but after checking /sys/devices/pci0000\:00/0000\:00\:02.0/backlight/acpi_video0/brightness it turns out that when this happens, only the brightness levels 13, 14, and 15 (which is the brightest) have any brighness at all. 12 and under means no backlight. The only "fix" I've found so far is rebooting, which sucks. I hope this will get fixed (I will report a bug on Launchpad next time it happens).
    Somewhere I picked up that passing
    i915.i915_enable_rc6=1
    to the linux parameters enables some great power saving features in the GPU. From modinfo:
    i915_enable_rc6:Enable power-saving render C-state 6. Different stages can be selected via bitmask values (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. default: -1 (use per-chip default) (int)
    Oh, and if anybody knows how I get my GNU/Linux partition to show up in the Mac boot screen I would be grateful! Right now I have refit installed, which works but I would rather just use the built-in boot manager, which works on the predecessor (MBA 3,2).

  • Help bootcamp windows 8.1 Macbook Air 2013

    I have a Macbook Air 2013 running Mavericks and I want to install windows 8.1 on it but first im getting a message saying that the iso is not 64-bit and im so confused because it partitoned my harddrive aswell so how do i get that back.

    Not true. In Mac OS's Disk Utility, you can delete the Bootcamp partition then resize the Mac partition larger to use the free space.
    Gn12, if your mac keeps trying to boot to your Boot Camp partition, hold down the Option key as you boot so that you can select the Mac partition then use the Startup Disk preferences to select the Mac partition for future boots.

  • Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive.

    Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive. (The problem is that Safari could not download the file "iTunesSetup.exe" because there is not enough free disk space.Try deleting documents or downloading to another drive) ... Perhaps this is the main problem why can not open iTunes and inscription is: the folder "iTunes" can not be found or created, and is required. The default location for this folder is inside the "Music" folder. - And after options ok, appears option: Choose iTunes Library with inscription iTunes needs a library to continue. You may choose an existing iTunes library or create a new one - but still following options Choose Library and the following options can not open iTunes ... Please for instructions on how to eliminate the problem or eror ...
    Mac is running OS X v10.6.8, Safari should be 5.1.10. Or  Mac OS X  /  Version  10.6.8  /  Build 10K549 / Serial Number W8****ATM  /  Processor 2.4 GHz Intel Core 2 Duo  /  Memory 4 GB 1067 MHz DDR3 or More Info:
    Hardware Overview:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro7,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2,4 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 4 GB
      Bus Speed: 1,07 GHz
      Boot ROM Version: MBP71.0039.B0B
      SMC Version (system): 1.62f7
      Serial Number (system): W80394HFATM
      Hardware UUID: 94647506-C5D0-5D73-BC7F-FC680D238F43
      Sudden Motion Sensor:
      State: Enabled
    <Personsl Information Edited by Host>

    buy an external HD   1TB for $60
    NO notebook is a mass storage device, so dont try to turn it into one, it doesnt work that way.
    Unless youre using it every couple weeks, its static data and should be on an external HD
    In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace.  You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
    Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
    Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.

  • Macbook Air 2013 OSX 10.9.2 iSight Camera not working

    Hello to everyone!
    I have a problem here in my new macbook air 2013.
    Since I updated my osx to 10.9.2 my iSight Camera is not working anymore. I tried to reset the SMC and PRAM without results. I also checked the permissions on my hard disk without any result.
    I've also tried to delete my AppleCamera.plugin file from /Library/CoreMediaIO/Plug-Ins/DAL/ and I tried to use another one from OSX 10.8.4 but it's not working.
    What can I do more?
    Is there any way to fix this problem without formatting?
    Regards,
    Marco Alioli

    marcoalioli wrote: ... What can I do more?...
    Some other ideas in iSight camera failure after OS X 10.9 Mavericks update

  • My Macbook Air 2013 battery life is sub 4 hours. How do I diagnose and resolve the issue?

    Hi,
    I have a 6 month old Macbook AIr 2013 and I am getting sub 4 hours of battery life against the 12 hrs advertised. I looked into the application monitor and found that Spotlight has been causing my battery to drain
    Here is a brief snapshot of System information
    Hardware Overview:
      Model Name:          MacBook Air
      Model Identifier:          MacBookAir6,2
      Processor Name:          Intel Core i5
      Processor Speed:          1.3 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
      Boot ROM Version:          MBA61.0099.B07
      SMC Version (system):          2.13f7
    Battery Information:
      Model Information:
      Serial Number:          D86349701E7F90KAV
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          511
      Hardware Revision:          000a
      Cell Revision:          1200
      Charge Information:
      Charge Remaining (mAh):          6362
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          7023
      Health Information:
      Cycle Count:          16
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1727
      Voltage (mV):          8266
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          1
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      DarkWakeBackgroundTasks:          1
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      Standby Delay:          10800
      Standby Enabled:          1
      Battery Power:
      System Sleep Timer (Minutes):          1
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      Current Power Source:          Yes
      DarkWakeBackgroundTasks:          0
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      Standby Delay:          10800
      Standby Enabled:          1
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    Can somebody please advise me on what exactly is wrong and what I need to do to resolve the issue. Much appreciate the help.
    Thanks
    Nitin

    1. Follow these instructions, or these for OS X 10.9 or later.
    2. In the Energy Saver preference pane, uncheck the box marked
    Enable Power Nap while on battery power
    3. You can also try resetting the SMC.
    4. Make sure your system is up to date in Software Update.
    5. Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • HT5634 I use MacBook Air 2013, but cannot install windows 7.

    Just buy MacBook Air 2013, but it stop @ keyboard and mouse installation.

    Incase you dn't want to read the whole thread, heres the main fix i used:
    khsaechao 
    Re: MacBook Air 2013 Windows 7 freezes during installation     14-Jun-2013 21:56    (in response to stihl88) 
    weird... ok so i followed your instructions and it's installing now.  Thanks Stihl88
    Here's what I did.
    - Put a copy of windows 64 bit iso on desktop
    - Ran bootcamp wizard and selected create boot disk and download latest software (not sure exact wording but you get the idea)
    - Ran bootcamp wizard again and only selected downloaded latest software
    - Ran bootcamp wizard again and choose install windows
    Now it's finishing install of windows...

  • HT1379 A flashing question mark appears when I re/start my MacBook Air 2013. At first, I pressed Power & Option button and it recovered from Internet. Then, four options appeared but none of them are helpful. Could u please help me to solve it asap?

    Hello,
    A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!

    You can try the following:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • How to add more disk space into /   root file system

    Hi All,
    Linux  2.6.18-128
    can anyone please let us know how to add more disk space into "/" root file system.
    i have added new hard disk with space of 20GB, 
    [root@rac2 shm]# df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/hda1             965M  767M  149M  84% /
    /dev/hda7             1.9G  234M  1.6G  13% /var
    /dev/hda6             2.9G   69M  2.7G   3% /tmp
    /dev/hda3             7.6G  4.2G  3.0G  59% /usr
    /dev/hda2              18G   12G  4.8G  71% /u01
    LABLE=/               2.0G     0  2.0G   0% /dev/shm
    /dev/hdb2             8.9G  149M  8.3G   2% /vm
    [root@rac2 shm]#

    Dude! wrote:
    I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
    Simple stats.  Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
    2 disks buy you 2 tickets in The-Drive-Failure lottery.
    Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
    In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
    The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
    I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive.

  • Can not open app store on macbook air 2013

    I just bought a 2nd Macbook Air 2013 using OS X 10.9.2 (13C64), but don:t know why I can't open the App Store on my macbook without any notifications when I click on the icon. Anyone can let me know what's the problem and what should I do now? Thank you very much!

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Time Machine drive reporting more and more disk space available

    OK, so I've been using Time Machine since 28-OCT-2007 and all my backups are present. I have watched my TMDrive (Buffalo 500GB Fire Wire) report as little as 20GB available and slowly over the past 30 or so days report 205.42 GB now available. Any sizable downloading I do is pointed at another external HDD and that is listed in the Do NOt Backup list. I understand how hourly and daily works, but to see such drastic swing in available disk space seems a bit odd. Has anyone else seen this?
    Message was edited by: brenodo

    Brenodo,
    As backups are thinned, you will see a reduction in the amount of space used on the TM drive. This is entirely normal. Keep in mind that TM is designed to maintain a "restorable" copy of your system, and all of your user files, past and present. This represents a discreet amount of data which is only added to in small increments, really... as you say, any large downloads are going to a dedicated external.
    While TM might temporarily use much more disk space to manage its backups, the thinning process will eventually weed out everything that is unnecessary, as you are now seeing. I wouldn't be surprised if you begin to see the free space being used again, at some point, and the cycle will begin anew.
    Scott

  • [SOLVED] No Audio on Macbook air 2013

    Hey all,
    Currently I have no sound (either through speakers or headphone jack) on my macbook air 2013.
    Card: HDA intel audio controller
    Chip: Cirrus logic CS4208
    when I boot up alsamixer, it says everything is unmuted and everything is at 100% volume, everything looks like its working fine but still no sound.
    Things that I have already done but no effect:
    blacklisted snd_intel8x0m (as per ALSA page)
    added options snd-hda-intel model=intel-mac-auto to both my sound.conf and modprobe.conf files.
    I am running the most up to date version of everything, including kernel version 3.12.8 which is supposed to have out of the box support for the card.
    Let me know if you need any other information!
    Thanks!
    Last edited by derekArch (2014-01-27 03:21:58)

    I pretty sure its not that. I use ratpoison as a WM (I like a minimal arrangement for my laptop) which doesn't use pulseaudio. Even when I had Gnome with pulseaudio. I still had the same issue.
    So I ran speaker-test -c 2 on my computer and this is the output:
    >>> speaker-test -c 2
    speaker-test 1.0.27.2
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
    Playback open error: -2,No such file or directory
    Which file/directory do I not have?
    I have also checked amixer and none of the channels are set to 'off

  • My macbook air 2013 will not find any wireless printers

    My macbook air 2013 with OS X 10.9.3 will not find any wireless printers. I've tried to add printers at a number of different locations and each time it fails to find any printers despite one's being online and fully functional. I am able to print from my iPhone on these networks to the wireless printers but my macbook air won't find any at all? The macbook air is online using the wifi network no problem - just won't find any printers, please help.

    You can download and run the free application Bonjour Browser. It will show whether the printer is detectable on the network. The printer should show up in one or more of the following categories:
    Internet Printing Protocol
    Print Spooler
    Printer PDL Data Stream
    Remote I/O USB Printer

Maybe you are looking for

  • MapIDs - How to make them the same as the Filename.htm?

    Hi All, I'm fairly new to Robohelp, hoping the experts can take it easy on me! We're in the process of converting our old WinHelp projects to Microsoft HTML Help projects. We previously had 10 separate .HLP files for our project, we're hoping to cond

  • How do you get your documents back from iCloud?

    This has happened twice so far, the documents that I had in pages have move to iCloud and I don't know how to get them back

  • Need validation on PO header payment terms forn a Pur Org

    We need to make the payment term field at PO header as non-editable after PO release for a company code/Pur Org. However, other company code/PurOrg, it should be editable thru ME22N after PO release. Pls suggest a solution. Rgds, Ganesh

  • Is it a way to read Multiple Attachment and send all     - Mail Sender?

    Hi Friends ,                       Can you please tell me how to send multiple Attachment in Mail Sender Adapter  ?                  <b>      I am able to bring Multiple Attachement in Payload .But, Only one attachemen't data is passed to IS.</b>    

  • I want to find out the medium Crete of gold

    Hi my name is seng I will like to check my contract killer zombies 2 why I buy the "medium crate of gold " I dint get it from yesterday night at 7.30pm to today 6.25 pm can I now wht happen. I call to hotline but there say I have to use by email can