Adding More Than 2 Internal Hard Drives

Anyone have any help they can give me on upgrading my power supply? I've read on other threads that this is a power supply issue when adding more drives.
G5 Jive mounting kit:
http://eshop.macsales.com/item/Sonnet%20Technology/ENCG53HD/
with this Serial ATA Host Controller Card (will buy from Amazon or whoever has it available):
http://www.welovemacs.com/tsataiix44.html
and 3 or these Western Digital 1TB hard drives:
http://eshop.macsales.com/item/Western%20Digital/WD10FYPS/
any suggestions/comments are welcome... i.e. Hitachi drives vs. Western Digital or 8port vs 4 port SATA card
Message was edited by: Portagee Man-O-War

I too have been looking into this and my decision was/is this. eSATA Card and external enclosures. Not only are you looking at Power Supply issues but HEAT as well. The G5 is still a nice fast machine but they are like heaters when running hard, add to what's already in there creating heat and you might end up with a nasty situation. You would need a card anyway and with the internal drive mounting adaptors running 100.00 and up the external box option is only 50.00-60.00 dollars more and you have no heat/power concerns and even more expandability if you need.
Hope that helps.
Message was edited by: CandTsmac

Similar Messages

  • Time Machine: Can I backup to more than 1 external hard drive?

    would anyone know about this: i have a TM at home in boston which i use when i am there; however, now i am in taiwan where i will have a second TM to use here: apart from naming the two TMs differently on the laptop (macbookpro, tiger), is there anything i should look out for? with many thanks, steven totosy

    Other users have successfully backed up their Mac to more than one Time Machine drive. As you stated, name them differently. You also need to switch TM drives, but that's only once after you've arrived at your new location. Note that after extended absences, TM may not want to continue with a backup and force you to create a new backup. I don't recall how much time has passed, but someone has stated 10 days, but I cannot confirm that.

  • Can iTunes utilize more than one external hard drive at once?

    A couple of years ago we had the bright idea to get a mac mini with an external hard drive and load it up with movies and such, so when we wanted to watch a tv show or movie, we could just scroll through the titles and pick without having to deal with the actual DVD (the mini is hooked up to a flatscreen tv). Needless to say, this monster has grown to epic proportions and we have since upgraded to 2 external hard drives (totaling 5 TB), and we now use another program that utilizes both hard drives without problem.
    The issue I am having is that we bought an AppleTV tonight, and have not had any problems getting iTunes to see the movies in the "Movies" External HD, but the tv shows are on another External HD and they take up a little more than 345 GB of space. I kinda liked having the two drives separate, but was wondering if there was a way to make the mini think these two drives were just one? I know it is a strange question, but I can't think of a solution at this point.
    Is there a way to tell iTunes to look in two locations for content?

    I am wondering if this set-up will work if I daisy chain the external drives. My iTunes library is stored on a 1.5 TB external drive. I have about 350 GB of storage left. I have been trying to find a way to add a drive instead of replacing the drive with a larger drive. If I can daisy chain, this will allow me to add storage without losing another firewire port. I just want to make sure this all works before I attempt any changes. Thank you.

  • More than one external hard drive....

    I already have a 160G lacie external hard drive and I need another. I want to purchase the Lacie 250G.
    Is there any problem with having two external hard drives connected at the same time?
    Thanks!
    -Jeff in NYC

    Not at all.
    Plug in as many as you have ports for
    If you are using FireWire drives, you probably have additional FireWire ports on the back of each drive. Just plug the next drive into the second port on the back of the drive.
    If you are using USB drives, you may or may not have a second port on the back of the first drive. If you do, use the same method.
    If you don't, then plug them directly into the USB ports on your computer.
    If you need more ports, get a powered USB hub. Make sure you get a powered USB hub (one with it's own power transformer), they are more stable.
    But, whenever possible, go with FireWire drives. The performance difference is quite significant.
    And, just for information, there is no problem mixing USB and FireWire drives if you want one or two of each
    Hope this helps.

  • Is it possible to use more than one external hard drive for Time Machine backups?

    I want to use two hard drives for Time Machine backups.
    Bigger one keep at home and be sure it is safe.
    Second one (very small pocket size) keep with me for travels.
    I want to backup to both drives to be sure I can restore everywhere and to be sure if something bad happened with my small travel disk I can restore from home backup.
    Is there any problem with listed schema? Is it normal for Time Machine to handle backups for different drivers and keep everything consistent and smooth?

    I really need some help!  I have been using an Iomega NAS 1TB HD for the past year.  And I received an error message.  I believe I have ran out of memory on this drive.
    Then recently in the last couple of months I got a ReadyNAS Duo 2TB with 2TB RAID.  Should I switch my back ups to this one and delete the other back up file or keep the old back up image file on the Iomega?
    Can I transfer the old image back up to this new ReadyNAS? How do I do this?
    I appreciate any help.

  • Power Mac G5, more than two internal HD

    Can the Power Mac G5 support more than two internal hard drives?
    If no, what are recommended solutions for inexpensive external storage? I work with standard definition video so I'm thinking FW800 would be ok. Thoughts?
    Thanks,
    jeremy
    Power Mac G5   Mac OS X (10.4.8)  

    It sure can.
    Depending on how crazy you want to get, the Power mac will hold up to 11 drives!
    For internal solutions
    Swift data has a system that will hold 3 extra drives with their Swift Data 200.
    http://transintl.com/store/category.cfm?Category=2490&RequestTimeOut=500#top
    Maxupgrades has a number of systems that will hold up to 9 extra drives with their maxconnect system
    http://www.maxupgrades.com/istore/index.cfm?fuseaction=category.display&category _id=306
    For external solutions
    Depending on wether you want Firewire or eSATA
    eSATA
    I am going to buy this when i get $$$
    Quite a good system, speeds up to 500 Mb/s
    you need to buy a PCI card as well.
    http://www.sonnettech.com/product/fusion.html#compatibility
    or
    Transintl has decent one as well
    http://transintl.com/store/category.cfm?Category=2600#top
    or
    Maxconnect also has one
    http://www.maxupgrades.com/istore/index.cfm?fuseaction=category.display&category _id=313
    Firewire
    This catagory is very vast. Almost every company has firewire solutions.
    If you want one that matches your Beautiful Powermac
    Transintl again, has a nice one
    http://transintl.com/store/category.cfm?Category=2597#top
    or
    Lacie
    http://www.lacie.com/products/range.htm?id=10033
    I think Maxtor amkes decent enclosures. Mine is very reliable
    Just do some research on what you find, compare prices and transfer speeds.
    work out prices with taxes and shipping
    and compare the transfer speeds in the $$ range you are looking at.
    let us know what you decide on
    Good Luck
    Andrew

  • Internal hard drive/repair: SMART status; Disk Utility, Tech Tool & More

    machine: 12" PowerBook 1.5 GHz PowerPC G4 (Aluminium) with 80GB internal HD
    internal hard drive (original): Hitachi Travelstar 5K100 series HTS541080G9AT00
    hard drive firmware: MB4AA5AJ
    ATA version: 6
    ATA standard: ATA/ATAPI-6 T13 1410D revision 3a
    I have monitored the SMART status etc. of my internal drive with smartmontools for some time. Occasionally, I would see an error or a failed self-test but later testing always succeeded and things did not seem to be problematic.
    At the beginning of this week, I started to see a lot of failed self-tests (though some still passed), a rising number of bad ("pending") sectors and reallocation attempts (though no reallocated sectors) and various other errors. The computer seemed to have trouble reading from the disk at times and Carbon Copy Cloner reported two I/O errors when cloning (a later clone succeeded). fsck showed errors although running fsck -fy repeatedly seemed to resolve them.
    The Apple hardware tests initially reported an error (2STF/8/3:ATA-100 ata-6-Master) but I hadn't realised I should disconnect peripherals before running it so I did that and repeated the test which found no issues. I ran the extended test a total of three times with no errors.
    As I continued to have problems, I booted from my clone and had Disk Utility wipe the drive by writing zeros to it. (I thought trying to get it to write everywhere would either finish the drive off or force it to reallocate the bad blocks. As I understand it, in normal use, the drive won't reallocate the blocks unless it can recover the data in the hopes of reading it at a later time.)
    I then continued monitoring the disk using smartmontools. At this point, short self-tests succeed but extended self-tests "disappear". They don't fail, they simply vanish. They begin and smartctl shows the test in progress but then no error or result is logged - it is as if the test was never run. The first time I did this, I got an error saying the SMART attributes could not be read but subsequent tests do not trigger even an error. Short self-tests continue to pass.
    There are now (according to SMART) zero bad ("pending") sectors but zero reallocated sectors, which seems odd. The raw read error rate fluctuates (zero one minute, many thousands a while later) although I am not sure it did not do this before.
    Disk Utility claims the disk does not support SMART status even though smartctl clearly shows it does. Disk Utility claims the volume is "OK".
    I ran Tech Tool Deluxe 3.04 from CD and 3.1.1 from my clone. In both cases, I ran all available tests on the drive. No problems were found.
    I am seeing some problems even while booted from my clone - yesterday, the system froze completely and I had to force a shut-down by switching off the power (fsck then found a minor error but repaired it). Just before this happened, I was unable to mount a disk image and was trying to rectify the situation when the system froze. It is possible that the errors fsck corrected were implicated in the freeze, rather than caused by it, since Disk Utility found and repaired similar errors for the other two clones I have (on different partitions of my external drive - yes, I know this is sub-optimal).
    Here is some current output from smartmontools:
    ---output: smartctl -q noserial -a disk0---
    smartctl version 5.38 [powerpc-apple-darwin8.11.0] Copyright (C) 2002-8 Bruce Allen
    Home page is http://smartmontools.sourceforge.net/
    === START OF INFORMATION SECTION ===
    Model Family: Hitachi Travelstar 5K100 series
    Device Model: Hitachi HTS541080G9AT00
    Firmware Version: MB4AA5AJ
    User Capacity: 80,026,361,856 bytes
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 6
    ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
    Local Time is: Sat Jul 3 20:28:52 2010 BST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 645) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 55) minutes.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 RawRead_ErrorRate 0x000b 100 100 062 Pre-fail Always - 0
    2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
    3 SpinUpTime 0x0007 142 142 033 Pre-fail Always - 2
    4 StartStopCount 0x0012 097 097 000 Old_age Always - 5793
    5 ReallocatedSectorCt 0x0033 100 100 005 Pre-fail Always - 0
    7 SeekErrorRate 0x000b 100 100 067 Pre-fail Always - 0
    8 SeekTimePerformance 0x0005 100 100 040 Pre-fail Offline - 0
    9 PowerOnHours 0x0012 039 039 000 Old_age Always - 26720
    10 SpinRetryCount 0x0013 100 100 060 Pre-fail Always - 0
    12 PowerCycleCount 0x0032 098 098 000 Old_age Always - 4168
    191 G-SenseErrorRate 0x000a 100 100 000 Old_age Always - 0
    192 Power-OffRetractCount 0x0032 100 100 000 Old_age Always - 201877487644
    193 LoadCycleCount 0x0012 001 001 000 Old_age Always - 2209599
    194 Temperature_Celsius 0x0002 141 141 000 Old_age Always - 39 (Lifetime Min/Max 16/46)
    196 ReallocatedEventCount 0x0032 100 100 000 Old_age Always - 194
    197 CurrentPendingSector 0x0022 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
    199 UDMACRC_ErrorCount 0x000a 200 200 000 Old_age Always - 0
    SMART Error Log Version: 1
    ATA Error Count: 2138 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
    PoweredUpTime is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.
    Error 2138 occurred at disk power-on lifetime: 26716 hours (1113 days + 4 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    10 51 00 09 4f c2 a0 Error: IDNF
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
    b0 d6 01 09 4f c2 a0 00 08:30:04.500 SMART WRITE LOG
    b0 d5 01 09 4f c2 a0 00 08:30:04.300 SMART READ LOG
    b0 d1 00 00 4f c2 a0 00 08:30:04.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
    b0 d0 00 00 4f c2 a0 00 08:30:04.000 SMART READ DATA
    b0 da 00 00 4f c2 a0 00 08:30:04.000 SMART RETURN STATUS
    Error 2137 occurred at disk power-on lifetime: 26682 hours (1111 days + 18 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    40 51 28 18 95 98 e4 Error: UNC 40 sectors at LBA = 0x04989518 = 77108504
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
    25 00 80 c0 94 98 e0 00 1d+01:30:37.600 READ DMA EXT
    25 00 80 c0 94 98 e0 00 1d+01:30:30.600 READ DMA EXT
    25 00 80 c0 94 98 e0 00 1d+01:30:22.600 READ DMA EXT
    25 00 80 c0 94 98 e0 00 1d+01:30:16.300 READ DMA EXT
    25 00 80 40 94 98 e0 00 1d+01:30:14.700 READ DMA EXT
    Error 2136 occurred at disk power-on lifetime: 26682 hours (1111 days + 18 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    40 51 21 1f 95 98 e4 Error: UNC 33 sectors at LBA = 0x0498951f = 77108511
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
    25 00 80 c0 94 98 e0 00 1d+01:30:30.600 READ DMA EXT
    25 00 80 c0 94 98 e0 00 1d+01:30:22.600 READ DMA EXT
    25 00 80 c0 94 98 e0 00 1d+01:30:16.300 READ DMA EXT
    25 00 80 40 94 98 e0 00 1d+01:30:14.700 READ DMA EXT
    25 00 80 c0 93 98 e0 00 1d+01:30:14.100 READ DMA EXT
    Error 2135 occurred at disk power-on lifetime: 26682 hours (1111 days + 18 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    40 51 22 1e 95 98 e4 Error: UNC 34 sectors at LBA = 0x0498951e = 77108510
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
    25 00 80 c0 94 98 e0 00 1d+01:30:22.600 READ DMA EXT
    25 00 80 c0 94 98 e0 00 1d+01:30:16.300 READ DMA EXT
    25 00 80 40 94 98 e0 00 1d+01:30:14.700 READ DMA EXT
    25 00 80 c0 93 98 e0 00 1d+01:30:14.100 READ DMA EXT
    25 00 80 40 93 98 e0 00 1d+01:30:13.500 READ DMA EXT
    Error 2134 occurred at disk power-on lifetime: 26682 hours (1111 days + 18 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    40 51 28 18 95 98 e4 Error: UNC 40 sectors at LBA = 0x04989518 = 77108504
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
    25 00 80 c0 94 98 e0 00 1d+01:30:16.300 READ DMA EXT
    25 00 80 40 94 98 e0 00 1d+01:30:14.700 READ DMA EXT
    25 00 80 c0 93 98 e0 00 1d+01:30:14.100 READ DMA EXT
    25 00 80 40 93 98 e0 00 1d+01:30:13.500 READ DMA EXT
    25 00 80 c0 92 98 e0 00 1d+01:30:12.100 READ DMA EXT
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBAof_firsterror
    # 1 Short offline Completed without error 00% 26717 -
    # 2 Short offline Completed without error 00% 26717 -
    # 3 Short offline Completed without error 00% 26717 -
    # 4 Short offline Completed without error 00% 26717 -
    # 5 Short offline Completed without error 00% 26716 -
    # 6 Short offline Completed without error 00% 26715 -
    # 7 Short offline Completed without error 00% 26714 -
    # 8 Short offline Completed without error 00% 26697 -
    # 9 Extended offline Completed: read failure 10% 26692 75071682
    #10 Short offline Completed without error 00% 26687 -
    #11 Extended offline Completed: read failure 10% 26676 77108511
    #12 Short offline Completed: read failure 40% 26663 296917
    #13 Short offline Completed without error 00% 26657 -
    #14 Short offline Completed: read failure 10% 26646 296918
    #15 Short offline Completed: read failure 70% 26645 296905
    #16 Short offline Completed: read failure 10% 26644 296910
    #17 Short offline Completed: read failure 10% 26644 296910
    #18 Short offline Completed: read failure 40% 26643 296916
    #19 Short offline Completed: read failure 20% 26643 296909
    #20 Extended offline Completed without error 00% 26620 -
    #21 Short offline Completed without error 00% 26618 -
    Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENTTESTSTATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    ---end output---
    Self-tests 1-8 were all run after I erased the disk. The others were run before I did so. Not listed are the extended self-tests I've started since erasing which, as I say, have simply disappeared.
    The checksum error regarding the log is normal for this disk. At least, I've got that error ever since I started using smartmontools for monitoring so I assume it is normal. (I installed this version of the software in about April 2008 and have used it since.) Also, starting offline testing has never succeeded on this disk (I think I checked into this at the time but can't quite remember - this is not new, anyway).
    Questions
    how should I interpret all this? (Why does Disk Utility say SMART is not supported while smartctl clearly shows it is at the same time? Why do the extended tests simply vanish? Is the drive definitely dying?) I do not want to replace the disk unless I absolutely have to because I understand that replacing disks in 12" PBs is no small matter and cost is an issue. I do not want to replace the machine unless I have to because cost is an issue and, also, I really like this computer and have no idea what I would want in its place, even if expense were no obstacle.
    if it isn't clear whether the drive is dying or not, is there some further strategy I can use to establish this?
    if the drive is dying, is a machine of this age worth repairing and, if it is, under what circumstances is it worth doing so? For example, it might be worth doing if you can do the job yourself, but that might be quite impractical for non-expert (not to mention, inexpert) users.
    if there is a hardware problem (which I obviously think is very, very probable at this point), is it definitely a dying hard drive? (I've seen people write ominous things about disk controllers etc. which I gather are more serious - or less repairable - than a "mere" dying disk.)
    what questions should I be asking you and what are the answers to those questions?!
    Many thanks for your patience in reading this far.
    - cfr

    The 12" PB internals are a bit more complex, for PB's. If you don't want to replace the hard drive yourself or pay someone to install it, you could always get an external firewire hard drive, and use it to boot from and for general usage. Would have to be firewire, since the PB won't book from a USB device. One example of what you could get is a 160GB external hard drive: http://eshop.macsales.com/item/Other%20World%20Computing/MS4U5160GB8/ . All the choices with that case are listed here: http://eshop.macsales.com/shop/firewire/on-the-go
    Have you called any Apple Authorized Service Providers to see what they would charge to install a drive for you? Whether you bought it or they supplied it? You can find a local one in the US at http://www.apple.com/buy/locator/service/

  • Time machine can not select my internal hard drive any more.

    Hi all
    Time machine can not select my internal hard drive any more. I only can back up external disks. Does anyone know how to fix this?
    All answers are much appreciated

    I don't know the answer but I have the same thing happen. I have two external drives I use for backup. Sometimes it can see one and sometimes another. Then sometimes it can't see either one.  I will take one out for a while then plug it back in and then it may see it.  Maybe it's a cable issue or something but I will be curious to hear what someone more knowledgeable says. 

  • Time Machine backup requires significantly more space than size of hard drive + external

    I can't seem to figure out what is going on here. I recently purchased a new Macbook Pro with a 1T SSD hard drive, upgrading from an older MB Pro with a 500 GB hard drive. In the past I've used Time Machine to back up my hard drive and an external hard drive with RAW format photos and video footage that totals 441.56 GB. My internal internal hard drive currently is 487 GB, and I've used a 1TB time machine back up without problem to date.
    I used Time Machine to install on the new system and it worked flawlessly, except that the Time Machine backups wouldn't continue. Time Machine--even when left overnight--would get hung up on Preparing Files to Back Up. So, I reformatted the Time Machine disk (lost the old backups) and attempted to back up from scratch. I then got a message that I need 3.37 TB to complete my new Time Machine back up, though the total size of the back up on disk is ~930 GB. I've read that Time Machine needs 20% - 30% overhead on disk to work well, but I can't figure out why it would require 3x the back up size. I'm hesitant to purchase a new 4 TB external hard drive as I suspect this is a software issue. I've tried reformatting the disk twice more (three total), rebooting my computer, etc. but I keep getting the 3.37 TB message. I'm operating Mavericks OS 10.9.4.
    I would be grateful for insight on this.
    Best,
    Alex

    Hi Linc, thanks for taking a look at this problem. I just reinitiated a backup to make sure it's most up-to-date. Without the external hard drive, I was able to complete a simple backup. After plugging the external in again, here's the log I got:
    8/6/14 11:34:03.228 PM com.apple.backupd[78806]: Starting automatic backup
    8/6/14 11:34:03.660 PM com.apple.backupd[78806]: Backing up to /dev/disk2s2: /Volumes/Time Machine/Backups.backupdb
    8/6/14 11:34:04.538 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78808]) Job appears to have crashed: Bus error: 10
    8/6/14 11:34:04.538 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:34:04.556 PM ReportCrash[78796]: Saved crash report for MessageCenter[78808] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233404_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:34:10.462 PM com.apple.backupd[78806]: Forcing deep traversal on source: "Media" (device: /dev/disk1s2 mount: '/Volumes/Media' fsUUID: BB6ACCE1-B004-3647-9721-0CE726FAA059 eventDBUUID: 0AC9DC0D-5BE3-4574-94C6-4B041C9C4A26)
    8/6/14 11:34:10.469 PM com.apple.backupd[78806]: Deep event scan at path:/Users/Alex/Pictures/Aperture Library.aplibrary/Database/apdb reason:contains changes|must scan subdirs|fsevent|missed reservation|file event|
    8/6/14 11:34:10.573 PM com.apple.backupd[78806]: Finished scan
    8/6/14 11:34:10.573 PM com.apple.backupd[78806]: Not using file event preflight for Macintosh HD
    8/6/14 11:34:14.674 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78820]) Job appears to have crashed: Bus error: 10
    8/6/14 11:34:14.674 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:34:14.693 PM ReportCrash[78796]: Saved crash report for MessageCenter[78820] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233414_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:34:24.815 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78821]) Job appears to have crashed: Bus error: 10
    8/6/14 11:34:24.815 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:34:24.835 PM ReportCrash[78796]: Saved crash report for MessageCenter[78821] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233424_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:34:34.954 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78822]) Job appears to have crashed: Bus error: 10
    8/6/14 11:34:34.954 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:34:34.978 PM ReportCrash[78796]: Saved crash report for MessageCenter[78822] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233434_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:34:45.091 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78823]) Job appears to have crashed: Bus error: 10
    8/6/14 11:34:45.091 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:34:45.109 PM ReportCrash[78796]: Saved crash report for MessageCenter[78823] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233445_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:34:55.119 PM ReportCrash[78825]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
    8/6/14 11:34:55.242 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78824]) Job appears to have crashed: Bus error: 10
    8/6/14 11:34:55.242 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:34:55.275 PM ReportCrash[78825]: Saved crash report for MessageCenter[78824] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233455_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:35:05.377 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78826]) Job appears to have crashed: Bus error: 10
    8/6/14 11:35:05.377 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:35:05.395 PM ReportCrash[78825]: Saved crash report for MessageCenter[78826] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233505_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:35:15.514 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78828]) Job appears to have crashed: Bus error: 10
    8/6/14 11:35:15.514 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:35:15.533 PM ReportCrash[78825]: Saved crash report for MessageCenter[78828] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233515_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:35:25.653 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78829]) Job appears to have crashed: Bus error: 10
    8/6/14 11:35:25.653 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:35:25.672 PM ReportCrash[78825]: Saved crash report for MessageCenter[78829] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233525_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:35:35.789 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78830]) Job appears to have crashed: Bus error: 10
    8/6/14 11:35:35.789 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:35:35.809 PM ReportCrash[78825]: Saved crash report for MessageCenter[78830] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233535_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:35:45.923 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78831]) Job appears to have crashed: Bus error: 10
    8/6/14 11:35:45.923 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:35:45.942 PM ReportCrash[78825]: Saved crash report for MessageCenter[78831] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233545_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:35:55.950 PM ReportCrash[78833]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
    8/6/14 11:35:56.071 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78832]) Job appears to have crashed: Bus error: 10
    8/6/14 11:35:56.071 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:35:56.105 PM ReportCrash[78833]: Saved crash report for MessageCenter[78832] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233556_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:36:06.210 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78834]) Job appears to have crashed: Bus error: 10
    8/6/14 11:36:06.210 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:36:06.229 PM ReportCrash[78833]: Saved crash report for MessageCenter[78834] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233606_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:36:10.023 PM WindowServer[109]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    8/6/14 11:36:10.135 PM WindowServer[109]: CGXMuxCapture: Starting
    8/6/14 11:36:10.136 PM WindowServer[109]: CGXMuxCapture: Acquired
    8/6/14 11:36:10.136 PM WindowServer[109]: Display 0x4280882 captured by conn 0xdf03
    8/6/14 11:36:14.010 PM WindowServer[109]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280882 device: 0x7f8682f01ec0  isBackBuffered: 1 numComp: 3 numDisp: 3
    8/6/14 11:36:16.346 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78836]) Job appears to have crashed: Bus error: 10
    8/6/14 11:36:16.346 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:36:16.365 PM ReportCrash[78833]: Saved crash report for MessageCenter[78836] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233616_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:36:19.883 PM WindowServer[109]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 10.86 seconds (server forcibly re-enabled them after 1.00 seconds)
    8/6/14 11:36:20.172 PM com.apple.SecurityServer[15]: Killing auth hosts
    8/6/14 11:36:20.172 PM com.apple.SecurityServer[15]: Session 100055 destroyed
    8/6/14 11:36:20.213 PM WindowServer[109]: CGXMuxCapture: Released
    8/6/14 11:36:20.213 PM WindowServer[109]: Display 0x4280882 released by conn 0xdf03
    8/6/14 11:36:20.237 PM WindowServer[109]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280882 device: 0x7f8682f01ec0  isBackBuffered: 1 numComp: 3 numDisp: 3
    8/6/14 11:36:26.343 PM com.apple.prefs.backup.remoteservice[78837]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
    8/6/14 11:36:26.396 PM com.apple.prefs.backup.remoteservice[78837]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
    8/6/14 11:36:26.512 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78838]) Job appears to have crashed: Bus error: 10
    8/6/14 11:36:26.512 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:36:26.536 PM ReportCrash[78833]: Saved crash report for MessageCenter[78838] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233626_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:36:26.614 PM com.apple.prefs.backup.remoteservice[78837]: Bogus event received by listener connection:
    <error: 0x7fff74e8fb50> { count = 1, contents =
      "XPCErrorDescription" => <string: 0x7fff74e8fe60> { length = 18, contents = "Connection invalid" }
    8/6/14 11:36:30.840 PM iTunes[637]: Entered:_AMMuxedDeviceDisconnected, mux-device:840
    8/6/14 11:36:30.840 PM iTunes[637]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:840
    8/6/14 11:36:30.841 PM iTunes[637]: tid:1aa47 - Mux ID not found in mapping dictionary
    8/6/14 11:36:30.841 PM iTunes[637]: tid:1aa47 - Can't handle disconnect with invalid ecid
    8/6/14 11:36:36.647 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78842]) Job appears to have crashed: Bus error: 10
    8/6/14 11:36:36.647 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:36:36.666 PM ReportCrash[78833]: Saved crash report for MessageCenter[78842] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233636_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:36:46.781 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78843]) Job appears to have crashed: Bus error: 10
    8/6/14 11:36:46.781 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:36:46.800 PM ReportCrash[78833]: Saved crash report for MessageCenter[78843] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233646_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:36:56.814 PM ReportCrash[78845]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
    8/6/14 11:36:56.936 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78844]) Job appears to have crashed: Bus error: 10
    8/6/14 11:36:56.936 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:36:56.997 PM ReportCrash[78845]: Saved crash report for MessageCenter[78844] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233656_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:37:07.081 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78846]) Job appears to have crashed: Bus error: 10
    8/6/14 11:37:07.081 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:37:07.099 PM ReportCrash[78845]: Saved crash report for MessageCenter[78846] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233707_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:37:17.224 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78847]) Job appears to have crashed: Bus error: 10
    8/6/14 11:37:17.224 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:37:17.243 PM ReportCrash[78845]: Saved crash report for MessageCenter[78847] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233717_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:37:27.361 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78849]) Job appears to have crashed: Bus error: 10
    8/6/14 11:37:27.361 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:37:27.379 PM ReportCrash[78845]: Saved crash report for MessageCenter[78849] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233727_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:37:35.193 PM com.apple.usbmuxd[40]: _SendAttachNotification Device fc:25:3f:70:c5:7c@fe80::fe25:3fff:fe70:c57c._apple-mobdev2._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
    8/6/14 11:37:37.496 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78851]) Job appears to have crashed: Bus error: 10
    8/6/14 11:37:37.496 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:37:37.515 PM ReportCrash[78845]: Saved crash report for MessageCenter[78851] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233737_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:37:47.636 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78852]) Job appears to have crashed: Bus error: 10
    8/6/14 11:37:47.636 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:37:47.656 PM ReportCrash[78845]: Saved crash report for MessageCenter[78852] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233747_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:37:57.665 PM ReportCrash[78855]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
    8/6/14 11:37:57.785 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78854]) Job appears to have crashed: Bus error: 10
    8/6/14 11:37:57.785 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:37:57.845 PM ReportCrash[78855]: Saved crash report for MessageCenter[78854] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233757_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:38:07.920 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78856]) Job appears to have crashed: Bus error: 10
    8/6/14 11:38:07.920 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:38:07.939 PM ReportCrash[78855]: Saved crash report for MessageCenter[78856] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233807_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:38:18.056 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78859]) Job appears to have crashed: Bus error: 10
    8/6/14 11:38:18.056 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:38:18.076 PM ReportCrash[78855]: Saved crash report for MessageCenter[78859] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233818_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:38:28.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=78861[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
    8/6/14 11:38:28.205 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78860]) Job appears to have crashed: Bus error: 10
    8/6/14 11:38:28.205 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:38:28.225 PM ReportCrash[78855]: Saved crash report for MessageCenter[78860] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233828_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:38:38.341 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78862]) Job appears to have crashed: Bus error: 10
    8/6/14 11:38:38.341 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:38:38.360 PM ReportCrash[78855]: Saved crash report for MessageCenter[78862] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233838_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:38:48.481 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78863]) Job appears to have crashed: Bus error: 10
    8/6/14 11:38:48.481 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:38:48.499 PM ReportCrash[78855]: Saved crash report for MessageCenter[78863] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233848_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:38:58.507 PM ReportCrash[78865]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
    8/6/14 11:38:58.628 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78864]) Job appears to have crashed: Bus error: 10
    8/6/14 11:38:58.628 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:38:58.664 PM ReportCrash[78865]: Saved crash report for MessageCenter[78864] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233858_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:39:08.768 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78866]) Job appears to have crashed: Bus error: 10
    8/6/14 11:39:08.768 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:39:08.787 PM ReportCrash[78865]: Saved crash report for MessageCenter[78866] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233908_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:39:18.907 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78868]) Job appears to have crashed: Bus error: 10
    8/6/14 11:39:18.907 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:39:18.926 PM ReportCrash[78865]: Saved crash report for MessageCenter[78868] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233918_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:39:29.043 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78869]) Job appears to have crashed: Bus error: 10
    8/6/14 11:39:29.043 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:39:29.063 PM ReportCrash[78865]: Saved crash report for MessageCenter[78869] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233929_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:39:33.045 PM com.apple.backupd[78806]: Deep event scan at path:/Volumes/Media reason:must scan subdirs|require scan|
    8/6/14 11:39:33.046 PM com.apple.backupd[78806]: Finished scan
    8/6/14 11:39:33.046 PM com.apple.backupd[78806]: Not using file event preflight for Media
    8/6/14 11:39:35.803 PM com.apple.backupd[78806]: Found 70992 files (587.73 GB) needing backup
    8/6/14 11:39:35.834 PM com.apple.backupd[78806]: 611.31 GB required (including padding), 518.88 GB available
    8/6/14 11:39:35.834 PM com.apple.backupd[78806]: No expired backups exist - deleting oldest backups to make room
    8/6/14 11:39:39.185 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78870]) Job appears to have crashed: Bus error: 10
    8/6/14 11:39:39.185 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:39:39.204 PM ReportCrash[78865]: Saved crash report for MessageCenter[78870] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233939_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:39:47.777 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-041205 containing 29.2 MB; 518.92 GB now available, 611.31 GB required
    8/6/14 11:39:47.777 PM com.apple.backupd[78806]: Removed 1 expired backups so far, more space is needed - deleting oldest backups to make room
    8/6/14 11:39:49.315 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78872]) Job appears to have crashed: Bus error: 10
    8/6/14 11:39:49.315 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:39:49.334 PM ReportCrash[78865]: Saved crash report for MessageCenter[78872] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233949_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:39:50.722 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-050217 containing 16.4 MB; 518.93 GB now available, 611.31 GB required
    8/6/14 11:39:50.722 PM com.apple.backupd[78806]: Removed 2 expired backups so far, more space is needed - deleting oldest backups to make room
    8/6/14 11:39:54.321 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-060415 containing 37.3 MB; 518.97 GB now available, 611.31 GB required
    8/6/14 11:39:54.321 PM com.apple.backupd[78806]: Removed 3 expired backups so far, more space is needed - deleting oldest backups to make room
    8/6/14 11:39:59.342 PM ReportCrash[78874]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
    8/6/14 11:39:59.381 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-070639 containing 108.3 MB; 519.09 GB now available, 611.31 GB required
    8/6/14 11:39:59.381 PM com.apple.backupd[78806]: Removed 4 expired backups so far, more space is needed - deleting oldest backups to make room
    8/6/14 11:39:59.467 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78873]) Job appears to have crashed: Bus error: 10
    8/6/14 11:39:59.467 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:39:59.507 PM ReportCrash[78874]: Saved crash report for MessageCenter[78873] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233959_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:40:02.467 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-080909 containing 91.3 MB; 519.18 GB now available, 611.31 GB required
    8/6/14 11:40:02.467 PM com.apple.backupd[78806]: Removed 5 expired backups so far, more space is needed - deleting oldest backups to make room
    8/6/14 11:40:02.467 PM com.apple.backupd[78806]: Deleted 5 backups containing 282.4 MB total; 519.18 GB now available, 611.31 GB required
    8/6/14 11:40:02.467 PM com.apple.backupd[78806]: Backup date range was shortened: oldest backup is now Aug 6, 2014
    8/6/14 11:40:03.163 PM com.apple.backupd[78806]: Backup failed with error 7: Not enough available disk space on the target volume.
    8/6/14 11:40:09.597 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78877]) Job appears to have crashed: Bus error: 10
    8/6/14 11:40:09.597 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:40:09.616 PM ReportCrash[78874]: Saved crash report for MessageCenter[78877] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-234009_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:40:19.731 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78878]) Job appears to have crashed: Bus error: 10
    8/6/14 11:40:19.731 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:40:19.749 PM ReportCrash[78874]: Saved crash report for MessageCenter[78878] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-234019_Alex-Edmundss-M acBook-Pro.crash
    8/6/14 11:40:29.863 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78879]) Job appears to have crashed: Bus error: 10
    8/6/14 11:40:29.863 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
    8/6/14 11:40:29.882 PM ReportCrash[78874]: Saved crash report for MessageCenter[78879] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-234029_Alex-Edmundss-M acBook-Pro.crash

  • Adding Internal Hard Drive

    I have the 15" 2.4 Ghz MacBook pro with the 160GB hard drive. I am already out of room. I was wondering if I can have the apple store put in the 250 GB drive. If I can, would there be a big difference in the 5400 rpm 250GB or the 7200rpm 200GB hard drive?
    I have a lot of music and videos. I mostly use the computer for iWeb, Final Cut Express and standard work applications.

    So I called Apple Care and a retail apple store. They do NOT do internal hard drive installations. You/we would have to go to an authorized Apple store (non-corporate) to have this done. I guess I will just keep using my portable hard drive.

  • Internal Hard Drive replacement issue?

    Hi,
    Last night, I upgraded my internal hard drive from 20Gig to 80Gig, and I added a DVD ROM drive so I can watch movies (instead of playing CD's only). I ran the hardware test disc and everything passed.
    In addition, last week, I installed 512MB of additional RAM. The physical installations of everything was really a lot easier than people in the forum would have you believe, but Pismos are definitely easier and a lot more user friendly when it comes to upgrading.
    The problem is I don't have any iBook installation discs. I DO have the 4 original restore discs, but when I attempt to do a restore, the restore option is grayed out and inaccessible. The eject and switch disc option only shuffle between image and disc. The HD icon won't come up. Startup without the restore discs only boots up to the question mark.
    Obviously, I didn't know that I was supposed to back up the original 20Gig drive before removing it. I guess I can put it back in, back it up, and take it out again. My question is, before I remove the 80Gig and reinstall the 20gig, does anyone know of another option to get the restore option to not be grayed out?
    If not, then I have another question. How can I back up the original iBook drive on my Pismo's external 300 Gig Firewire Seagate without destroying all the data I've backed up from the Pismo.
    It is partitioned into 2, but one of them is only 10Gigs large as a mirror of 1 of my Pismo's 10Gig HD? If it isn't possible, then I guess I can destroy everything on my Seagate and reinstall it again when I'm done upgrading the iBook. I would rather not do that though.
    Thank you in advance for any ideas you may have on the subject,
    A Little Fish in the BigMac Pond

    Check Apple's Knowledge Base article on restoring your Apple software for links to the proper instructions for your model (which depends upon which software came with it). Most likely, the Restore discs are not startup CD's, so you can't use them until OS X is installed on the computer.
    You need the installation disc to initialize the drive and format it as Mac OS Extended (Journaled).
    I haven't used it, but DiskStudio is supposed to allow you to partition without erasing the hard drive.

  • Can i show and play music from my external hard drive in iTunes without adding it to my Mac hard drive?

    I have more music than I can keep on my Macbook hard drive by over 200GB. I'm hoping to be able to show and play all music from my external hard drive in iTunes without having to add any of it to my Macbook Hard Drive

    Hello B3NN13,
    If you would like to add the music from your external hard drive to iTunes without copying it to the iTunes Library on your internal hard drive, you may find the following article helpful:
    Add files to your library without adding them to your iTunes folder
    When you add an item already on your computer to your iTunes library, iTunes places a copy of the file in your iTunes folder. The original file remains in its current location.
    You can change this setting so that files are added to your iTunes library without being added to the iTunes folder. You might want to do this, for example, if you prefer to store video files on an external disk but still want to view them in iTunes.
    Choose iTunes > Preferences, and click Advanced.
    Deselect the checkbox next to “Copy files to iTunes Media folder when adding to library.”
    From now on, when you drag a file to your library or choose File > Add to Library, the item appears in iTunes, but the actual file isn’t copied or moved.
    Tip: You can temporarily reverse this setting by holding down the Option key while you drag files to the iTunes window.
    iTunes 12 for Mac: Change where your iTunes files are stored
    Sincerely,
    - Brenden

  • The internal hard drive on my early 2009 24" iMac is nearly full.  How do I add an external drive so that it functions just like the internal drive on the iMac?

    The internal hard drive on my early 2009 24" iMac is nearly full.  I have already worked to free as much space on the HD as possible.  How do I add an external HD and have the iMac read it as though it was part of the internal HD.  I know about external HD for additional storage and I do have an external HD, but, it is so much easier to search the drive when it is internal than having to perform a search on the internal drive and then a search on the external drives.  And, it is easier to save files to an internal drive so that I don't have to decide which external drive to use to save files.  In other words, I want to add an external HD and have it function as though I had purchased a larger internal HD.

    That is simply not possible. Every drive is a separate device. It cannot be used to extend an internal drive as though you had a seamlessly larger drive.
    What you can do is to create a striped RAID array using the internal drive and an external drive. However, doing this will erase the internal drive and you will lose everything on the internal drive. Furthermore, installing Lion or Mountain Lion becomes a bit of a problem because you cannot create a Recovery HD on a RAID and this tends to make the installer choke. However, you can clone an existing Lion or Mountain Lion system to the RAID and designate the RAID as a startup volume.
    I would not recommend the RAID solution, personally, but there are many who do. I prefer the basic solution of spending the money on a larger internal hard drive instead of an external hard drive.
    RAID Basics
    For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs.  Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
    RAID Tutorial;
    RAID Array and Server: Hardware and Service Comparison.
    Hardware or Software RAID?
    RAID Hardware Vs RAID Software - What is your best option?
    RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
    RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
    Pros and cons. Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
    For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

  • Internal Hard Drives Disappeared, Finder Memory Problem

    Hello Helpful Folks,
    I recently installed an addional internal Hard Drive, and an additional 1GB SDRAM. This worked great for a day, but the next morning, after powering up, system was extremely sluggish, and after much deadline-induced impatient problem solving, has gone from bad to worse (system refuses to acknowledge existence of internal Hard Drives). I apologize in advance for the length of this post, but as
    the devil is in the details, I figure too much info is better than not enough.
    Following is a breakdown of my system: AS IT LAST WORKED; RECENT UPGRADES; and MY LAME ATTEMPTS AT PROBLEM SOLVING THAT HAVE MADE THINGS WORSE. Please don't interpret my all caps as shouting, just trying to organize this post for better clarity.
    System is dedicated to Video Editing with FCP 3, running under OS 9.2.2. System is "off the Grid", i.e. no network, no internet, no printer, no gaming devices. System was purchased new in July 2001, by a friend. At one point I know this system had an Airport card, which was removed prior to my purchase in 2003. I can't remember what else it may have had installed in its history, but here's what it has now:
    SYSTEM AS IT LAST WORKED:
    **bold items are upgrades Original Owner or I installed with no apparent problems**
    Power Mac G4 "Quicksilver" 2001
    867 PowerPC G4, 256 L2, 2MB L3
    -1 Stick "ValueRAM - KVR 133 x 64 C3/512" in PC 133 DIMM slot **
    - "Virtual Memory" was turned off years ago due to conflict with FCP 3
    -2 empty DIMM slots
    -1 60 GB internal HD (Maxtor Ultra ATA/100), 1 partition, formatted HFS+, jumpered as "Master" on Internal ATA 2 ID=0 (which as I understand it is ATA/66 speed)
    -1 Pioneer "Superdrive" DVD-R/W/CD-R/W on Internal ATA 0 ID=0
    -NVIDIA GeForce2 MX with 32MB SDRAM in AGP Slot, feeding a 17" Apple Studio Display.
    -PCI Display Card "formacGA7" - not attached to any external device, not sure what its intended purpose is.**
    -3 Empty PCI Slots
    -OEM Keyboard attached to Monitor's rear USB port.
    -Microsoft 3 Button Wheel mouse with "IntelliEye" (wheel is 3rd Button) connected to Keyboard USB port (right side).**
    -2 OEM FireWire (400) ports
    -2 OEM USB (1) ports
    Peripherals that have worked in various configurations with this system over the past 3 years:
    -3 OWC Mercury Elite ("Oxford Chipset") Externally powered, External FireWire(400) 200GB Hard Drives, 1 partition each, formatted HFS+, daisy-chained to either of the FireWire ports.
    -1 Canon GL1 MiniDV camera, attached either to the other FireWire port, or to the last drive in the chain, depending on my urgency/laziness factor. BTW, FCP 3 has worked flawlessly controlling this Cam for logging and Batch Capturing.
    Applications on System Hard Drive that I have OEM CDs for:
    -OS 9.2 - (I think I remember that OS X was removed from system due to conflicts shortly after original purchase)
    -FCP 3
    -DiskWarrior (version unknown, purchased from Alsoft in 2003)
    -OWC Intech Hard Disk SpeedTools ver 3.5
    Other CDs I have:
    OEM CDs for Power Mac G4:
    -Software Install, OS 9.2, CD vers 1
    -Software Install, OS 10.0.4, CD vers 1
    -Software Restore, OS 9.2 & 10.0.4 CDs vers 1, Discs 1-4 of 4.
    -OEM Apple Hardware Test; Power Mac G4, SW vers 1.2.1
    Applications on system Hard Drive that I don't have CDs for, that I rarely use, but I'd like to keep:
    -After Effects 5.0
    -QuickTime Player 6.0.2
    -Toast Audio Extractor 1.1
    -Toast Titanium 5.0.2
    Applications on system Hard Drive I use if my wife is busy on our Windows XP machine:
    -Photshop 6.0
    -Microsoft Word & Excel
    # of other Applications on System Hard Drive I either don't use or may be integral to the system: 260
    # of Control Panels:
    -Enabled: 34
    -Disabled: 0
    # of Extensions:
    -Enabled: 174
    -Disabled: 0
    note: a number of the applications and extensions are for AOL, Quickbooks, Microsoft Money and the like, as well as other things I don't use (Airport, USB printers, Networking, etc.)
    Smart things I did:
    -Regularly made backup copies of my FCP projects to the external drives.
    -Bought a copy of MacDrive so I can see what's on my External Drives on the XP machine.
    -Printed out System Profile before I installed upgrades.
    -Thoroughly searched this discussion board for and gathered as much info as I could before upgrading.
    Dumb things I did:
    -Made a copy, but not a clone, of my System Folder to one of the external drives when I first got it.
    -Didn't keep any sort of separate log of what's on the External Drives.
    -Never ran any sort of Disk Maintenance, even after one of the Externals crashed (DiskWarrior saved my butt on that).
    -Ignored some of the advice on this discussion board.
    Really dumb thing I did without even realizing it:
    Captured all media for a rush job onto my internal system Hard Drive, as well as storing and using massive jpgs for the same job on that same drive...
    Which led to painfully slow rendering times, and crashes caused by "Error: Out of Memory", which I interpreted as "Must buy more memory" and not "must make sure I'm not trying to edit media stored on system drive, especially with massive jpgs that I should reduce"
    RECENT UPGRADES:
    Here's what I did, and how I did it:
    Turned off system, disconnected all External FireWire Devices, disconnected Monitor, opened case, touched various metal parts of case and power supply to discharge any Static, unplugged power cable.
    -Installed 2 512MB sticks of "Lifetime" PC 133 SDRAM; total System RAM is now 1.5GB, all 3 DIMM slots now occupied.
    -Installed 1 Maxtor "DiamondMax" Ultra ATA/133 100GB Hard Drive (8 MB buffer) as "Slave" (no jumper) in top of U-Carrier above System Hard Drive; attached to middle of original Apple ribbon cable, attached available power plug.
    Taped spare jumper to inside of empty drive bay, noting origin and date. Did NOT push PMU button. Carefully closed case. Reconnected Monitor, did NOT reconnect any FireWire devices. Powered System on, but did NOT perform PRAM reset.
    I don't remember the exact order of what happened next, but I think: System booted up normally, a window popped up saying a new drive had been found, would I like to intitialize it?, which I did as Mac OS extended, and then named. If I was instructed to restart, I did so, otherwise did not. Clicked on "about this Mac" and saw that it now showed 1.5GB RAM. I then went about moving Media/Render files off the System drive (and one of the Externals) onto the Internal Drive, with a combination of FCP's Media Manager, and dragging from the Finder. After files had copied, dragged Media/Render files from System Drive to Trash. Opened FCP project, had FCP re-link to new locations of missing files. Saved, closed, and re-opened project, set Capture/Scratch disc to new internal Drive. At some point I changed FCP's Memory Allocation from whatever it was to 512000KB Minimum, and 900000KB Prefered (and I hope I got all those zeroes right). Did NOT restart after changing Memory Allocation, unless a window popped up instructing me to do so, in which case I did. Re-opened my project, rendered a few thing at a noticeably increased speed, saved everything, emptied the Trash, shut everything down, and called it a night as it was 4:30 am.
    A few hours later, I plugged the MiniDV and an External Drive into the FW ports and powered up the System. It was behaving extremely sluggishly. I would click on something, the pointer would turn into a wristwatch (sometimes with the minute-hand moving, sometimes not) and like an actual minute later, what I'd clicked on would open. All three drives were on the desktop, still had their files, and "About this Mac" still showed 1.5GB total Memory. So I powered down, disconnected the FW devices, waited a bit, and powered back up. Same sluggish response. I tried to open my FCP project file, and instead got a Window that said something to the effect of "The Application associated with this document could not be found". I think I tried to open FCP from the Applications folder on the System Drive and got the same message (I'd only had 3 hours sleep, no coffee, my client had died, and his family was coming for whatever I had in a few hours).
    LAME ATTEMPTS AT PROBLEM SOLVING THAT HAVE MADE THINGS WORSE
    Panic had set in, which never solves anything, so I don't remember what order I performed which tasks, between searching for clues in this forum, and convincing myself that that would be faster than trying to compose a question, waiting for a response, etc.
    The first two things I did, and I can't remember which I did first (both from Keyboard Commands during Restart):
    Rebuild Desktop
    PRAM Reset
    Neither of those solved the problem, so I continued.
    I tried restarting without extensions.
    I would get errors that said something like "Not Enough Memory to Open Finder".
    I tried booting from Disc 1 of the Software Restore Disk, which only wanted to destroy my data.
    I tried booting from the OS 10 disk, with the same result.
    I was finally able to boot from the OS 9.2 Software Install Disk, and actually saw both internal drives on the desktop, and the 1.5GB RAM in About this Mac. I tried to allocate more memory to Finder, but was informed that "Cannot Perform Requested Operation. This operation requires versions above 8.0".
    I think at this point I decided that I must have too many extensions, and started disabling ones I thought irrelevent to my cause (mostly anything that said "AOL", "Airport", "Ethernet", "Printer", "Modem", "Speakable", and a couple things called "Open TPT".
    It gets worse. Then I decided to turn off some "unnecessary" things via the control panels, but somehow managed to disable the control panels themselves: AppleTalk, DialAssist, File Sharing, Modem, Mouse (as I saw that Microsoft Mouse was among the others), Remote Access, Speech, USB Printer Sharing, and possibly TCP/IP.
    That certainly didn't help anything (though upon restarting from the OS 9.2 Disc I was able to see the extensions and control panels in their respective "Disabled" folders in the System Folder). But I still wasn't able to get more Memory to Finder.
    So, I decided a few more PRAM resets might help, which succeeded in making both Internal Hard Drives disappear. I tried booting up from the DiskWarrior disc, but even the Mighty DiskWarrior couldn't find the drives. I performed the longer, in depth version of the Apple Hardware Tools tests, which reported that everything's fine (including the new RAM), but made no mention of the Hard Drives at all. The deadline having long passed, I shut the system down. I read through more posts and tech articles, etc.
    I searched my External drives with MacDrive on my XP, and found the drive that has the copy of my System Folder (which shows all extensions and control panels as enabled); not sure if the Quicksilver will boot from that, I don't know what the Keyboard command for booting from a FireWire drive is (if there is one) and the drive itself only has 900MB of free space.
    I can't find any reference to Internal ATA drives anywhere in the MacDrive documentation; if it was possible I'd put them into the XP, get the files off the Mac drives, reformat them and install OS9 from the Discs.
    This is where I am now:
    The Quick Silver is still powered down. I removed the Microsft mouse and replaced it with the OEM Apple mouse. I opened the case, and removed the PRAM/Backup battery (manufacture date: July 2001). Couldn't find my voltmeter, so took the bat to Radio Shack and bought a new one. Had the Radio Shack guy test the old one: it showed 3.69 volts still. Have not installed the new battery yet. The case is still open, waiting for any advice any of you might have to offer.
    Thank you all so much for your patience in perusing and pursuing this.
    Sincerely,
    Patterson
    Power Mac G4 Quicksilver 867   Mac OS 9.2.x   17" Studio Display, 512MB RAM

    Thank you Rodney and John,
    The jumpers are correct for both Maxtor Drives.
    Rodney, you are correct in that the initial problem (slow rendering/"out of Memory" crashes) was caused by my not realizing I'd stupidly captured several GBs of media to my system drive, and not checking which drives those files were on (as I'd assumed I'd put them on one of my external media drives) once that problem presented itself.
    Before I'd determined what I'd done, I bought the extra RAM. After I'd found the media files on the System Drive, and saw that my dedicated media drives were too full to easily move them, I decided to buy an additional Internal drive so that I could:
    -Move the Media onto it relatively quickly and finish my urgent project.
    -Juggle all my media into a more organized fashion for archiving (as most of my projects are on-going long-term affairs)
    -Wipe it, Partition it, and clone my System Drive onto it, as a spare bootable drive in case my OEM System Drive failed.
    Copying the Media files onto the New Drive and moving the System Drive's Media files into the Trash worked great: huge improvement in Rendering, etc.
    Before shutting down for the night I Emptied the Trash, and was pleased with the amount of space I'd freed up on the System Drive.
    My guess is that the System Drive was terribly fragmented, having been subjected to intense use over the past 5 years without any sort of Drive Maintainence, and deleting that massive amount from it in one shot caused my extreme system sluggishness upon Startup the next day.
    My subsequent lame attempts to solve the sluggishnes ultimately resulted in my losing access to both drives.
    Today, I replaced the Backup Battery, pushed the PMU, re-attached the AC, and Powered Up with the case open as per your suggestion.
    It was trying for a few minutes (the gray screen went black at one point, and then returned to gray) before presenting me with the flashing question mark.
    There was, however, a quiet but distinct "buzzing" sound that would alternate: 1 sec "buzz", one second silence, one second "buzz", one second silence, etc. coming from the drives, even after the "?" appeared.
    I powered down, removed the Ribbon and Power Cables from the new "Slave" drive, and powered up again, with the exact same results.
    I powered down, removed the Ribbon and Power cables from the original "Master" drive, reinstalled the Jumper on the New Drive as "Master", plugged the End of the Ribbon and the Power cables into the New "Master" drive and powered up. The screen went to the "?" within 20 seconds instead of 4+ minutes, and no more "buzzing".
    I put the Apple Hardware Tools Disk in, ran the "long" test, and everything came out fine.
    I have to abandon this for now, but thanks again for your previous advice, and any more you may have!
    Cheers,
    Patterson

  • A problem about the policy of RMS which is added more than 500 principals

    Hello specialists ,
        I've a question about RMS , when I added more than about 500 principals (users & groups ) into a policy in the RMS , it will report an error for any operation about the policy , and I find the error message as followed (for theconvenience, I paste all of the logs in the weblogic).
       We have tested all of our environments : Weblogic , JBoss , Websphere , each of them  makes the same mistake . those operations include : try to open the documents protected by this kind of policies , to disable or enable the policies, to look the detail from the "adminui" . when decreasing the principals for this kind of policy to almost 450 (I am not sure the clearly number) with java code , the results will be ok .
       So anyone can help me ? It's really very important for us , becuase our customer refused to pay the left money of this project till this problem is resolved . and I have reported this problem to the Enterprise Support in Indian (the case is :181916446), but , obviously , it seems they are burning my patience  . At the same time , I think it's a problem of the product , I think the SQL is really very bad ,at least , not so good .
       Any help will be very appreciated !
      <2011-2-10 16:01:14> <Info> <NodeManager> <Starting WebLogic server with command line: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\bin\java -Dweblogic.Name=RightsManagementServer -Djava.security.policy=E:\bea\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.management.server=http://192.168.52.196:7001 -Djava.library.path=E:\bea\WLSERV~1.3\server\bin;.;C:\Windows\system32;C:\Windows;E:\bea\ WLSERV~1.3\server\native\win\32;E:\bea\WLSERV~1.3\server\bin;E:\bea\JROCKI~1\jre\bin;E:\be a\JROCKI~1\bin;E:\bea\WLSERV~1.3\server\native\win\32\oci920_8;C:\Windows\system32;C:\Wind ows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\bin; -Djava.class.path=E:\jdbc\sqljdbc_1.2\enu\sqljdbc.jar;E:\bea\wlserver_10.3\server\lib\web logic.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\lib\tools.jar;E:\bea\user_projects\dom ains\lcdomain\idplib\pop3.jar -Dweblogic.system.BootIdentityFile=E:\domains\zonydomain\servers\RightsManagementServer\d ata\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.ReverseDNSAllowed=false -Dadobeidp.RootDirectory=E:\domains\zonydomain\. -Dfile.encoding=utf8 -Djava.net.preferIPv4Stack=true -Djava.security.policy=E:\bea\wlserver_10.3\server\lib\weblogic.policy -Xms256m -Xmx1792m weblogic.Server >
    <2011-2-10 16:01:14> <Info> <NodeManager> <Working directory is "E:\domains\zonydomain">
    <2011-2-10 16:01:14> <Info> <NodeManager> <Server output log file is "E:\domains\zonydomain\servers\RightsManagementServer\logs\RightsManagementServer.out">
    <2011-2-10 16:01:16 CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.1.0-123-138454-1.6.0_20-20101014-1351-windows-x86_64 from Oracle Corporation>
    <2011-2-10 16:01:17 CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3  Fri Jul 25 16:30:05 EDT 2008 1137967 >
    <2011-2-10 16:01:20 CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <2011-2-10 16:01:20 CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <2011-2-10 16:01:20 CST> <Notice> <Log Management> <BEA-170019> <The server log file E:\domains\zonydomain\servers\RightsManagementServer\logs\RightsManagementServer.log is opened. All server side log events will be written to this file.>
    <2011-2-10 16:01:20 CST> <Warning> <NodeManager> <BEA-300043> <Node manager native library not found - server process id not saved.>
    <2011-2-10 16:01:20 CST> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that wlntio.dll is in: 'E:\bea\WLSERV~1.3\server\bin;.;C:\Windows\system32;C:\Windows;E:\bea\WLSERV~1.3\server\n ative\win\32;E:\bea\WLSERV~1.3\server\bin;E:\bea\JROCKI~1\jre\bin;E:\bea\JROCKI~1\bin;E:\b ea\WLSERV~1.3\server\native\win\32\oci920_8;C:\Windows\system32;C:\Windows;C:\Windows\Syst em32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\bin;'
    >
    <2011-2-10 16:01:25 CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <2011-2-10 16:01:30 CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <2011-2-10 16:01:30 CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <2011-2-10 16:01:41 CST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "IDP_DS". Connections will not be tested.>
    <2011-2-10 16:01:43 CST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "RM_DS". Connections will not be tested.>
    <2011-2-10 16:02:00 CST> <Warning> <EJB> <BEA-010100> <This server is not part of a cluster. Hence "InMemory replication feature" for StatefulSession EJB "PolicyManagerBean" will have no effect on this server.>
    2011-2-10 16:02:06 com.adobe.logging.AdobeLoggerImpl <clinit>
    Info: Logging level null
    2011-2-10 16:02:10 com.adobe.logging.AdobeLoggerImpl <clinit>
    Info: Logging level null
    16:02:34,362  WARN Digester:121 - [NavigationRuleRule]{faces-config/navigation-rule} Merge(/*)
    16:02:36,022  INFO ValidatorPlugIn:211 - Loading validation rules file from '/WEB-INF/validator-rules.xml'
    16:02:36,023  INFO ValidatorPlugIn:211 - Loading validation rules file from '/WEB-INF/custom-rules.xml'
    16:02:36,024  INFO ValidatorPlugIn:211 - Loading validation rules file from '/WEB-INF/validation.xml'
    16:02:36,532  INFO TilesPlugin:236 - Tiles definition factory loaded for module ''.
    16:02:38,534  INFO TilesPlugin:236 - Tiles definition factory loaded for module ''.
    16:02:38,548  INFO ValidatorPlugIn:211 - Loading validation rules file from '/WEB-INF/validator-rules.xml'
    16:02:38,549  INFO ValidatorPlugIn:211 - Loading validation rules file from '/WEB-INF/validation.xml'
    16:02:39,064  INFO UMActionServlet:84 -
    * System Properties **************************************************
    adobeidp.RootDirectory.......................: E:\domains\zonydomain\.
    awt.toolkit..................................: sun.awt.windows.WToolkit
    com.adobe.idp.enableLC7Compatibility.........: false
    com.adobe.idp.enableLC7Compatibility.SetByDM.: true
    com.adobe.serverInstanceId...................: adobewl_RightsManagementServer
    com.adobe.tempDirectory......................: E:\temp\adobewl_RightsManagementServer
    file.encoding................................: utf8
    file.encoding.pkg............................: sun.io
    file.separator...............................: \
    java.awt.graphicsenv.........................: sun.awt.Win32GraphicsEnvironment
    java.awt.printerjob..........................: sun.awt.windows.WPrinterJob
    java.class.path..............................: E:\jdbc\sqljdbc_1.2\enu\sqljdbc.jar;E:\bea\wlserver_10.3\server\lib\weblogic.jar;E:\Java\ jrockit-jdk1.6.0_20-R28.1.0-4.0.1\lib\tools.jar;E:\bea\user_projects\domains\lcdomain\idpl ib\pop3.jar
    java.class.version...........................: 50.0
    java.endorsed.dirs...........................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\endorsed
    java.ext.dirs................................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\ext
    java.home....................................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre
    java.io.tmpdir...............................: C:\Windows\TEMP\
    java.library.path............................: E:\bea\WLSERV~1.3\server\bin;.;C:\Windows\system32;C:\Windows;E:\bea\WLSERV~1.3\server\na tive\win\32;E:\bea\WLSERV~1.3\server\bin;E:\bea\JROCKI~1\jre\bin;E:\bea\JROCKI~1\bin;E:\be a\WLSERV~1.3\server\native\win\32\oci920_8;C:\Windows\system32;C:\Windows;C:\Windows\Syste m32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\bin;
    java.naming.factory.initial..................: weblogic.jndi.WLInitialContextFactory
    java.naming.factory.url.pkgs.................: weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.c orba.j2ee.naming.url
    java.net.preferIPv4Stack.....................: true
    java.protocol.handler.pkgs...................: weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net
    java.runtime.name............................: Java(TM) SE Runtime Environment
    java.runtime.version.........................: 1.6.0_20-b02
    java.security.policy.........................: E:\bea\wlserver_10.3\server\lib\weblogic.policy
    java.specification.name......................: Java Platform API Specification
    java.specification.vendor....................: Sun Microsystems Inc.
    java.specification.version...................: 1.6
    java.vendor..................................: Oracle Corporation
    java.vendor.url..............................: http://www.oracle.com/
    java.vendor.url.bug..........................: http://download.oracle.com/docs/cd/E15289_01/go2troubleshooting.html
    java.version.................................: 1.6.0_20
    java.vm.info.................................: compiled mode
    java.vm.name.................................: Oracle JRockit(R)
    java.vm.specification.name...................: Java Virtual Machine Specification
    java.vm.specification.vendor.................: Sun Microsystems Inc.
    java.vm.specification.version................: 1.0
    java.vm.vendor...............................: Oracle Corporation
    java.vm.vendor.url...........................: http://www.oracle.com/
    java.vm.vendor.url.bug.......................: http://download.oracle.com/docs/cd/E15289_01/go2troubleshooting.html
    java.vm.version..............................: R28.1.0-123-138454-1.6.0_20-20101014-1351-windows-x86_64
    javax.rmi.CORBA.PortableRemoteObjectClass....: weblogic.iiop.PortableRemoteObjectDelegateImpl
    javax.rmi.CORBA.UtilClass....................: weblogic.iiop.UtilDelegateImpl
    javax.xml.rpc.ServiceFactory.................: weblogic.webservice.core.rpc.ServiceFactoryImpl
    javax.xml.soap.MessageFactory................: weblogic.webservice.core.soap.MessageFactoryImpl
    kernel.download.enabled......................: false
    line.separator...............................:
    org.omg.CORBA.ORBClass.......................: weblogic.corba.orb.ORB
    org.omg.CORBA.ORBSingletonClass..............: weblogic.corba.orb.ORB
    org.xml.sax.driver...........................: weblogic.xml.jaxp.RegistryXMLReader
    org.xml.sax.parser...........................: weblogic.xml.jaxp.RegistryParser
    os.arch......................................: amd64
    os.name......................................: Windows Server 2008 R2
    os.version...................................: 6.1
    path.separator...............................: ;
    sun.arch.data.model..........................: 64
    sun.boot.class.path..........................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\resources.jar;E:\Java\jrockit-jdk1.6.0_ 20-R28.1.0-4.0.1\jre\lib\rt.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\sunrsasi gn.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\jsse.jar;E:\Java\jrockit-jdk1.6.0 _20-R28.1.0-4.0.1\jre\lib\jce.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\charse ts.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\classes
    sun.boot.library.path........................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\bin
    sun.cpu.endian...............................: little
    sun.cpu.isalist..............................: amd64
    sun.desktop..................................: windows
    sun.io.unicode.encoding......................: UnicodeLittle
    sun.java.launcher............................: SUN_STANDARD
    sun.jnu.encoding.............................: Cp1252
    sun.management.compiler......................: Oracle JRockit(R) Optimizing Compiler
    sun.os.patch.level...........................:
    user.country.................................: CN
    user.dir.....................................: E:\domains\zonydomain
    user.home....................................: C:\
    user.language................................: zh
    user.name....................................: LATTE$
    user.timezone................................: Asia/Shanghai
    user.variant.................................:
    vde.home.....................................: E:\domains\zonydomain\servers\RightsManagementServer\data\ldap
    weblogic.Name................................: RightsManagementServer
    weblogic.ReverseDNSAllowed...................: false
    weblogic.classloader.preprocessor............: weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
    weblogic.management.server...................: http://192.168.52.196:7001
    weblogic.nodemanager.ServiceEnabled..........: true
    weblogic.security.CustomTrustKeyStoreFileName: ads-ca.jks
    weblogic.security.CustomTrustKeyStorePassPhrase: password
    weblogic.security.CustomTrustKeyStoreType....: JKS
    weblogic.security.SSL.ignoreHostnameVerification: true
    weblogic.security.TrustKeyStore..............: CustomTrust
    weblogic.system.BootIdentityFile.............: E:\domains\zonydomain\servers\RightsManagementServer\data\nodemanager\boot.properties
    * JSP Engine ****
    JSP-Specification..: 2.1
    * Runtime ****
    Total Memory.......: 764 mb
    16:02:39,072  INFO UMActionServlet:85 -
    * Servlet Context ****************************************************
    Servlet API........: 2.5
    ServerInfo.........: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967
    * Attributes ****
    com.cc.framework.locale......................: true
    com.cc.framework.painter.....................: [app, html, global]
    javax.servlet.context.tempdir................: E:\domains\zonydomain\servers\RightsManagementServer\tmp\_WL_user\adobe-livecycle-weblogi c\uv7zbv\public
    org.apache.commons.validator.VALIDATOR_RESOURCES: org.apache.commons.validator.ValidatorResources@3334767
    org.apache.struts.action.ACTION_SERVLET......: com.adobe.idp.um.ui.UMActionServlet@2e716fd
    org.apache.struts.action.MESSAGE.............: org.apache.struts.util.PropertyMessageResources@3021141
    org.apache.struts.action.MODULE..............: org.apache.struts.config.impl.ModuleConfigImpl@2d75c6b
    org.apache.struts.action.PLUG_INS............: [Lorg.apache.struts.action.PlugIn;@302b235
    org.apache.struts.action.SERVLET_MAPPING.....: *.do
    org.apache.struts.globals.MODULE_PREFIXES....: [Ljava.lang.String;@31aa885
    org.apache.struts.tiles.DEFINITIONS_FACTORY..: I18nFactorySet :
    --- default factory ---
    {${YOUR_DEFINITION_HERE}={name=${YOUR_DEFINITION_HERE}, path=null, role=null, controller=null, controllerType=null, controllerInstance=null, attributes={}}
    --- other factories ---
    org.apache.struts.validator.STOP_ON_ERROR....: true
    weblogic.servlet.WebAppComponentMBean........: [email protected]a([zonydomain]/Applicatio ns[adobe-livecycle-weblogic]/WebAppComponents[/um])
    weblogic.servlet.WebAppComponentRuntimeMBean.: weblogic.servlet.internal.WebAppRuntimeMBeanImpl@52ebb2
    16:02:39,284  INFO QuartzScheduler:209 - Quartz Scheduler v.1.6.0 created.
    16:02:39,300  INFO RAMJobStore:141 - RAMJobStore initialized.
    16:02:39,301  INFO DirectSchedulerFactory:422 - Quartz scheduler 'SimpleQuartzScheduler
    16:02:39,302  INFO DirectSchedulerFactory:424 - Quartz scheduler version: 1.6.0
    16:02:39,306  INFO QuartzScheduler:455 - Scheduler SimpleQuartzScheduler_$_SIMPLE_NON_CLUSTERED started.
    Got IP Address of LC Server:192.168.52.196
    16:03:08,130  INFO QuartzScheduler:209 - Quartz Scheduler v.1.6.0 created.
    16:03:08,136  INFO DSCJobStoreTX:547 - Using thread monitor-based data access locking (synchronization).
    16:03:08,234  INFO DSCJobStoreTX:721 - Removed 0 Volatile Trigger(s).
    16:03:08,235  INFO DSCJobStoreTX:729 - Removed 0 Volatile Job(s).
    16:03:08,244  INFO DSCJobStoreTX:61 - JobStoreTX initialized.
    16:03:08,245  INFO DSCSchedulerFactory:972 - Quartz scheduler 'IDPSchedulerService' initialized from an externally provided properties instance.
    16:03:08,245  INFO DSCSchedulerFactory:974 - Quartz scheduler version: 1.6.0
    16:03:08,259  INFO DSCJobStoreTX:775 - Freed 0 triggers from 'acquired' / 'blocked' state.
    16:03:08,269  INFO DSCJobStoreTX:879 - Handling 1 trigger(s) that missed their scheduled fire-time.
    16:03:08,389  INFO DSCJobStoreTX:785 - Recovering 0 jobs that were in-progress at the time of the last shut-down.
    16:03:08,390  INFO DSCJobStoreTX:799 - Recovery complete.
    16:03:08,393  INFO DSCJobStoreTX:806 - Removed 0 'complete' triggers.
    16:03:08,395  INFO DSCJobStoreTX:812 - Removed 0 stale fired job entries.
    16:03:08,411  INFO QuartzScheduler:455 - Scheduler IDPSchedulerService_$_20 started.
    <2011-2-10 16:03:25 CST> <Error> <com.adobe.datamodel.repository.DBModelPersistence> <BEA-000000> <Naming exception during loading of all data models: javax.naming.NameNotFoundException: While trying to look up /IDP_DS in /app/webapp/remoting/18935606.; remaining name '/IDP_DS'>
    16:03:27,894  INFO TilesPlugin:236 - Tiles definition factory loaded for module ''.
    16:03:27,910  INFO ValidatorPlugIn:211 - Loading validation rules file from '/WEB-INF/validator-rules.xml'
    16:03:27,910  INFO ValidatorPlugIn:211 - Loading validation rules file from '/WEB-INF/validation.xml'
    16:03:28,555  INFO EDCActionServlet:84 -
    * System Properties **************************************************
    adobeidp.RootDirectory.......................: E:\domains\zonydomain\.
    awt.toolkit..................................: sun.awt.windows.WToolkit
    com.adobe.idp.DocumentManagerServlet.........: started
    com.adobe.idp.enableLC7Compatibility.........: false
    com.adobe.idp.enableLC7Compatibility.SetByDM.: true
    com.adobe.serverInstanceId...................: adobewl_RightsManagementServer
    com.adobe.tempDirectory......................: E:\temp\adobewl_RightsManagementServer
    file.encoding................................: utf8
    file.encoding.pkg............................: sun.io
    file.separator...............................: \
    gemfire.disableShutdownHook..................: true
    java.awt.graphicsenv.........................: sun.awt.Win32GraphicsEnvironment
    java.awt.printerjob..........................: sun.awt.windows.WPrinterJob
    java.class.path..............................: E:\jdbc\sqljdbc_1.2\enu\sqljdbc.jar;E:\bea\wlserver_10.3\server\lib\weblogic.jar;E:\Java\ jrockit-jdk1.6.0_20-R28.1.0-4.0.1\lib\tools.jar;E:\bea\user_projects\domains\lcdomain\idpl ib\pop3.jar
    java.class.version...........................: 50.0
    java.endorsed.dirs...........................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\endorsed
    java.ext.dirs................................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\ext
    java.home....................................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre
    java.io.tmpdir...............................: C:\Windows\TEMP\
    java.library.path............................: E:\bea\WLSERV~1.3\server\bin;.;C:\Windows\system32;C:\Windows;E:\bea\WLSERV~1.3\server\na tive\win\32;E:\bea\WLSERV~1.3\server\bin;E:\bea\JROCKI~1\jre\bin;E:\bea\JROCKI~1\bin;E:\be a\WLSERV~1.3\server\native\win\32\oci920_8;C:\Windows\system32;C:\Windows;C:\Windows\Syste m32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\bin;
    java.naming.factory.initial..................: weblogic.jndi.WLInitialContextFactory
    java.naming.factory.url.pkgs.................: weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.c orba.j2ee.naming.url
    java.net.preferIPv4Stack.....................: true
    java.protocol.handler.pkgs...................: weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net
    java.runtime.name............................: Java(TM) SE Runtime Environment
    java.runtime.version.........................: 1.6.0_20-b02
    java.security.policy.........................: E:\bea\wlserver_10.3\server\lib\weblogic.policy
    java.specification.name......................: Java Platform API Specification
    java.specification.vendor....................: Sun Microsystems Inc.
    java.specification.version...................: 1.6
    java.vendor..................................: Oracle Corporation
    java.vendor.url..............................: http://www.oracle.com/
    java.vendor.url.bug..........................: http://download.oracle.com/docs/cd/E15289_01/go2troubleshooting.html
    java.version.................................: 1.6.0_20
    java.vm.info.................................: compiled mode
    java.vm.name.................................: Oracle JRockit(R)
    java.vm.specification.name...................: Java Virtual Machine Specification
    java.vm.specification.vendor.................: Sun Microsystems Inc.
    java.vm.specification.version................: 1.0
    java.vm.vendor...............................: Oracle Corporation
    java.vm.vendor.url...........................: http://www.oracle.com/
    java.vm.vendor.url.bug.......................: http://download.oracle.com/docs/cd/E15289_01/go2troubleshooting.html
    java.vm.version..............................: R28.1.0-123-138454-1.6.0_20-20101014-1351-windows-x86_64
    javax.rmi.CORBA.PortableRemoteObjectClass....: weblogic.iiop.PortableRemoteObjectDelegateImpl
    javax.rmi.CORBA.UtilClass....................: weblogic.iiop.UtilDelegateImpl
    javax.xml.rpc.ServiceFactory.................: weblogic.webservice.core.rpc.ServiceFactoryImpl
    javax.xml.soap.MessageFactory................: weblogic.webservice.core.soap.MessageFactoryImpl
    kernel.download.enabled......................: false
    line.separator...............................:
    org.apache.xerces.xni.parser.Configuration...: org.apache.xerces.parsers.XMLGrammarCachingConfiguration
    org.omg.CORBA.ORBClass.......................: weblogic.corba.orb.ORB
    org.omg.CORBA.ORBSingletonClass..............: weblogic.corba.orb.ORB
    org.xml.sax.driver...........................: weblogic.xml.jaxp.RegistryXMLReader
    org.xml.sax.parser...........................: weblogic.xml.jaxp.RegistryParser
    os.arch......................................: amd64
    os.name......................................: Windows Server 2008 R2
    os.version...................................: 6.1
    p2p.useSSL...................................: false
    path.separator...............................: ;
    sun.arch.data.model..........................: 64
    sun.boot.class.path..........................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\resources.jar;E:\Java\jrockit-jdk1.6.0_ 20-R28.1.0-4.0.1\jre\lib\rt.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\sunrsasi gn.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\jsse.jar;E:\Java\jrockit-jdk1.6.0 _20-R28.1.0-4.0.1\jre\lib\jce.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\charse ts.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\classes
    sun.boot.library.path........................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\bin
    sun.cpu.endian...............................: little
    sun.cpu.isalist..............................: amd64
    sun.desktop..................................: windows
    sun.io.unicode.encoding......................: UnicodeLittle
    sun.java.launcher............................: SUN_STANDARD
    sun.jnu.encoding.............................: Cp1252
    sun.management.compiler......................: Oracle JRockit(R) Optimizing Compiler
    sun.os.patch.level...........................:
    user.country.................................: CN
    user.dir.....................................: E:\domains\zonydomain
    user.home....................................: C:\
    user.language................................: zh
    user.name....................................: LATTE$
    user.timezone................................: Asia/Shanghai
    user.variant.................................:
    vde.home.....................................: E:\domains\zonydomain\servers\RightsManagementServer\data\ldap
    weblogic.Name................................: RightsManagementServer
    weblogic.ReverseDNSAllowed...................: false
    weblogic.classloader.preprocessor............: weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
    weblogic.management.server...................: http://192.168.52.196:7001
    weblogic.nodemanager.ServiceEnabled..........: true
    weblogic.security.CustomTrustKeyStoreFileName: ads-ca.jks
    weblogic.security.CustomTrustKeyStorePassPhrase: password
    weblogic.security.CustomTrustKeyStoreType....: JKS
    weblogic.security.SSL.ignoreHostnameVerification: true
    weblogic.security.TrustKeyStore..............: CustomTrust
    weblogic.system.BootIdentityFile.............: E:\domains\zonydomain\servers\RightsManagementServer\data\nodemanager\boot.properties
    * JSP Engine ****
    JSP-Specification..: 2.1
    * Runtime ****
    Total Memory.......: 917 mb
    16:03:28,559  INFO EDCActionServlet:85 -
    * Servlet Context ****************************************************
    Servlet API........: 2.5
    ServerInfo.........: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967
    * Attributes ****
    com.cc.framework.locale......................: true
    com.cc.framework.painter.....................: [app, html, global]
    javax.servlet.context.tempdir................: E:\domains\zonydomain\servers\RightsManagementServer\tmp\_WL_user\adobe-livecycle-weblogi c\srbeev\public
    org.apache.commons.validator.VALIDATOR_RESOURCES: org.apache.commons.validator.ValidatorResources@33c707a
    org.apache.struts.action.ACTION_SERVLET......: com.adobe.edc.ui.EDCActionServlet@6f15bc0
    org.apache.struts.action.MESSAGE.............: org.apache.struts.util.PropertyMessageResources@31fdbc7
    org.apache.struts.action.MODULE..............: org.apache.struts.config.impl.ModuleConfigImpl@2f3b181
    org.apache.struts.action.PLUG_INS............: [Lorg.apache.struts.action.PlugIn;@32005d9
    org.apache.struts.action.SERVLET_MAPPING.....: *.do
    org.apache.struts.globals.MODULE_PREFIXES....: [Ljava.lang.String;@12907d6
    org.apache.struts.tiles.DEFINITIONS_FACTORY..: I18nFactorySet :
    --- default factory ---
    {${YOUR_DEFINITION_HERE}={name=${YOUR_DEFINITION_HERE}, path=null, role=null, controller=null, controllerType=null, controllerInstance=null, attributes={}}
    --- other factories ---
    org.apache.struts.validator.STOP_ON_ERROR....: true
    weblogic.servlet.WebAppComponentMBean........: [email protected]b8([zonydomain]/Applicati ons[adobe-livecycle-weblogic]/WebAppComponents[/edc/admin])
    weblogic.servlet.WebAppComponentRuntimeMBean.: weblogic.servlet.internal.WebAppRuntimeMBeanImpl@946930
    16:03:29,403  INFO TilesPlugin:236 - Tiles definition factory loaded for module ''.
    16:03:29,420  INFO ValidatorPlugIn:211 - Loading validation rules file from '/WEB-INF/validator-rules.xml'
    16:03:29,421  INFO ValidatorPlugIn:211 - Loading validation rules file from '/WEB-INF/validation.xml'
    16:03:30,011  INFO EDCActionServlet:84 -
    * System Properties **************************************************
    adobeidp.RootDirectory.......................: E:\domains\zonydomain\.
    awt.toolkit..................................: sun.awt.windows.WToolkit
    com.adobe.idp.DocumentManagerServlet.........: started
    com.adobe.idp.enableLC7Compatibility.........: false
    com.adobe.idp.enableLC7Compatibility.SetByDM.: true
    com.adobe.serverInstanceId...................: adobewl_RightsManagementServer
    com.adobe.tempDirectory......................: E:\temp\adobewl_RightsManagementServer
    file.encoding................................: utf8
    file.encoding.pkg............................: sun.io
    file.separator...............................: \
    gemfire.disableShutdownHook..................: true
    java.awt.graphicsenv.........................: sun.awt.Win32GraphicsEnvironment
    java.awt.printerjob..........................: sun.awt.windows.WPrinterJob
    java.class.path..............................: E:\jdbc\sqljdbc_1.2\enu\sqljdbc.jar;E:\bea\wlserver_10.3\server\lib\weblogic.jar;E:\Java\ jrockit-jdk1.6.0_20-R28.1.0-4.0.1\lib\tools.jar;E:\bea\user_projects\domains\lcdomain\idpl ib\pop3.jar
    java.class.version...........................: 50.0
    java.endorsed.dirs...........................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\endorsed
    java.ext.dirs................................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\ext
    java.home....................................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre
    java.io.tmpdir...............................: C:\Windows\TEMP\
    java.library.path............................: E:\bea\WLSERV~1.3\server\bin;.;C:\Windows\system32;C:\Windows;E:\bea\WLSERV~1.3\server\na tive\win\32;E:\bea\WLSERV~1.3\server\bin;E:\bea\JROCKI~1\jre\bin;E:\bea\JROCKI~1\bin;E:\be a\WLSERV~1.3\server\native\win\32\oci920_8;C:\Windows\system32;C:\Windows;C:\Windows\Syste m32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\bin;
    java.naming.factory.initial..................: weblogic.jndi.WLInitialContextFactory
    java.naming.factory.url.pkgs.................: weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.c orba.j2ee.naming.url
    java.net.preferIPv4Stack.....................: true
    java.protocol.handler.pkgs...................: weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net
    java.runtime.name............................: Java(TM) SE Runtime Environment
    java.runtime.version.........................: 1.6.0_20-b02
    java.security.policy.........................: E:\bea\wlserver_10.3\server\lib\weblogic.policy
    java.specification.name......................: Java Platform API Specification
    java.specification.vendor....................: Sun Microsystems Inc.
    java.specification.version...................: 1.6
    java.vendor..................................: Oracle Corporation
    java.vendor.url..............................: http://www.oracle.com/
    java.vendor.url.bug..........................: http://download.oracle.com/docs/cd/E15289_01/go2troubleshooting.html
    java.version.................................: 1.6.0_20
    java.vm.info.................................: compiled mode
    java.vm.name.................................: Oracle JRockit(R)
    java.vm.specification.name...................: Java Virtual Machine Specification
    java.vm.specification.vendor.................: Sun Microsystems Inc.
    java.vm.specification.version................: 1.0
    java.vm.vendor...............................: Oracle Corporation
    java.vm.vendor.url...........................: http://www.oracle.com/
    java.vm.vendor.url.bug.......................: http://download.oracle.com/docs/cd/E15289_01/go2troubleshooting.html
    java.vm.version..............................: R28.1.0-123-138454-1.6.0_20-20101014-1351-windows-x86_64
    javax.rmi.CORBA.PortableRemoteObjectClass....: weblogic.iiop.PortableRemoteObjectDelegateImpl
    javax.rmi.CORBA.UtilClass....................: weblogic.iiop.UtilDelegateImpl
    javax.xml.rpc.ServiceFactory.................: weblogic.webservice.core.rpc.ServiceFactoryImpl
    javax.xml.soap.MessageFactory................: weblogic.webservice.core.soap.MessageFactoryImpl
    kernel.download.enabled......................: false
    line.separator...............................:
    org.apache.xerces.xni.parser.Configuration...: org.apache.xerces.parsers.XMLGrammarCachingConfiguration
    org.omg.CORBA.ORBClass.......................: weblogic.corba.orb.ORB
    org.omg.CORBA.ORBSingletonClass..............: weblogic.corba.orb.ORB
    org.xml.sax.driver...........................: weblogic.xml.jaxp.RegistryXMLReader
    org.xml.sax.parser...........................: weblogic.xml.jaxp.RegistryParser
    os.arch......................................: amd64
    os.name......................................: Windows Server 2008 R2
    os.version...................................: 6.1
    p2p.useSSL...................................: false
    path.separator...............................: ;
    sun.arch.data.model..........................: 64
    sun.boot.class.path..........................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\resources.jar;E:\Java\jrockit-jdk1.6.0_ 20-R28.1.0-4.0.1\jre\lib\rt.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\sunrsasi gn.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\jsse.jar;E:\Java\jrockit-jdk1.6.0 _20-R28.1.0-4.0.1\jre\lib\jce.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\lib\charse ts.jar;E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\classes
    sun.boot.library.path........................: E:\Java\jrockit-jdk1.6.0_20-R28.1.0-4.0.1\jre\bin
    sun.cpu.endian...............................: little
    sun.cpu.isalist..............................: amd64
    sun.desktop..................................: windows
    sun.io.unicode.encoding......................: UnicodeLittle
    sun.java.launcher............................: SUN_STANDARD
    sun.jnu.encoding.............................: Cp1252
    sun.management.compiler......................: Oracle JRockit(R) Optimizing Compiler
    sun.os.patch.level...........................:
    user.country.................................: CN
    user.dir.....................................: E:\domains\zonydomain
    user.home....................................: C:\
    user.language................................: zh
    user.name....................................: LATTE$
    user.timezone................................: Asia/Shanghai
    user.variant.................................:
    vde.home.....................................: E:\domains\zonydomain\servers\RightsManagementServer\data\ldap
    weblogic.Name................................: RightsManagementServer
    weblogic.ReverseDNSAllowed...................: false
    weblogic.classloader.preprocessor............: weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
    weblogic.management.server...................: http://192.168.52.196:7001
    weblogic.nodemanager.ServiceEnabled..........: true
    weblogic.security.CustomTrustKeyStoreFileName: ads-ca.jks
    weblogic.security.CustomTrustKeyStorePassPhrase: password
    weblogic.security.CustomTrustKeyStoreType....: JKS
    weblogic.security.SSL.ignoreHostnameVerification: true
    weblogic.security.TrustKeyStore..............: CustomTrust
    weblogic.system.BootIdentityFile.............: E:\domains\zonydomain\servers\RightsManagementServer\data\nodemanager\boot.properties
    * JSP Engine ****
    JSP-Specification..: 2.1
    * Runtime ****
    Total Memory.......: 917 mb
    16:03:30,014  INFO EDCActionServlet:85 -
    * Servlet Context ****************************************************
    Servlet API........: 2.5
    ServerInfo.........: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967
    * Attributes ****
    com.cc.framework.locale......................: true
    com.cc.framework.painter.....................: [app, html, global]
    javax.servlet.context.tempdir................: E:\domains\zonydomain\servers\RightsManagementServer\tmp\_WL_user\adobe-livecycle-weblogi c\xhf1jd\public
    org.apache.commons.validator.VALIDATOR_RESOURCES: org.apache.commons.validator.ValidatorResources@231f192
    org.apache.struts.action.ACTION_SERVLET......: com.adobe.edc.ui.EDCActionServlet@153d409
    org.apache.struts.action.MESSAGE.............: org.apache.struts.util.PropertyMessageResources@2208500
    org.apache.struts.action.MODULE..............: org.apache.struts.config.impl.ModuleConfigImpl@1ee0605
    org.apache.struts.action.PLUG_INS............: [Lorg.apache.struts.action.PlugIn;@216aebd
    org.apache.struts.action.SERVLET_MAPPING.....: *.do
    org.apache.struts.globals.MODULE_PREFIXES....: [Ljava.lang.String;@2675446
    org.apache.struts.tiles.DEFINITIONS_FACTORY..: I18nFactorySet :
    --- default factory ---
    {${YOUR_DEFINITION_HERE}={name=${YOUR_DEFINITION_HERE}, path=null, role=null, controller=null, controllerType=null, controllerInstance=null, attributes={}}
    --- other factories ---
    org.apache.struts.validator.STOP_ON_ERROR....: true
    um_assertionid_holder........................: com.adobe.idp.um.auth.filter.AssertionIdHolder@1c5878e
    weblogic.servlet.WebAppComponentMBean........: [email protected]8([zonydomain]/Applicatio ns[adobe-livecycle-weblogic]/WebAppComponents[/edc])
    weblogic.servlet.WebAppComponentRuntimeMBean.: weblogic.servlet.internal.WebAppRuntimeMBeanImpl@ac5e96
    ========= calling EDCStartupService::initializeresources  =========
    <2011-2-10 16:03:32 CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <2011-2-10 16:03:32 CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <2011-2-10 16:03:32 CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <2011-2-10 16:03:33 CST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias ads-credentials from the JKS keystore file E:\domains\zonydomain\ads-credentials.jks.>
    <2011-2-10 16:03:33 CST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the JKS keystore file E:\domains\zonydomain\ads-ca.jks.>
    <2011-2-10 16:03:33 CST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 192.168.52.196 might be incorrect or another process is using port 7002: java.net.BindException: Address already in use: JVM_Bind.>
    <2011-2-10 16:03:33 CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.52.196:8001 for protocols iiop, t3, ldap, snmp, http.>
    <2011-2-10 16:03:33 CST> <Notice> <WebLogicServer> <BEA-000332> <Started WebLogic Managed Server "RightsManagementServer" for domain "zonydomain" running in Development Mode>
    <2011-2-10 16:03:35 CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <2011-2-10 16:03:35 CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    16:03:46,830  INFO Reference:? - Verification successful for URI "#dc30cfd93b52e950ebde68e0b7c8ac56"
    16:03:50,726  INFO Reference:? - Verification successful for URI "#cb96de4448538dd00314b484966dae46"
    16:03:51,127  INFO TilesRequestProcessor:103 - Tiles definition factory found for request processor ''.
    <2011-2-10 16:03:51 CST> <Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. You may want to alter your configuration.>
    16:04:08,115  INFO Reference:? - Verification successful for URI "#ba03069e2b38142918e1e6f54a73208c"
    16:04:10,602  INFO Reference:? - Verification successful for URI "#a120044172268198925a0495b25e618a"
    16:05:56,603  INFO Reference:? - Verification successful for URI "#e4e5267f958ba1431f4ecdee4b18e454"
    16:06:04,059  INFO Reference:? - Verification successful for URI "#f664cefe6083120e323479fd72ec57c1"
    <2011-2-10 16:06:44 CST> <Warning> <com.adobe.idp.common.errors.exception.IDPLoggedException> <BEA-000000> <UserM:GENERIC_WARNING: [Thread Hashcode: -1257420086] com.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.storeprovider.jdbc.DBStatement] errorCode:12290 errorCodeHEX:0x3002 message:execute query failure(select distinct  top 500  * from EDCAGGPRINCIPALVIEWENTIT where ((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((( (((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((( (((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((( (((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((( (((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((( ((((((((((((((((((((((((((((((((((((((((((((((((((EDCAGGPRINCIPALVIEWENTIT.v17 = ? or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or EDCAGGPRINCIPALVIEWENTIT.v17 = ?) or E

    We are using Microsoft SQL Server 2008 . but it's well with MySQL & JBoss

Maybe you are looking for

  • Possible to stream movies from external HD- Airport Extreme- AppleTV?

    Hi Folks, I'm new to these boards so 'hi'. I have looked all over Google and various other forums for this answer but haven't received anything definitive. I'm basically trying to find out if it's possible for me to connect an external hard drive to

  • Adobe pdf to Flash page turning book

    First of all apologies as this isn't strictly an Indesign itself question - more the end product of Indesign brochure query. Can anyone recommend a particular professional PDF to Flash page  turning book effect software. I've googled but there's a fa

  • Log Axis value?

    Hello The X axis I think in the display panel logQ base Q, but the X axis value or the logQ this calculated value, for example: the requirement that correspond to the 1000 in the log1000 X axis,. Would you please tell me how to do? As shown in Fig. T

  • Navigating the array on menu

    import java.util.*; public class Main {      * @param args the command line arguments     private static void bubbleSort(int[] x) {     int n = x.length;     boolean doMore = true;     while (doMore) {         n--;         doMore = false;         for

  • Update icons for v2.1 does not appear anymore...

    Last week the icon to update to V2.1 appeared on my PB, I waited, to check on the net what was in 2.1. By the time I was ready to update, next day, no icon !  When I go in settings, verify for update I have the message that I have the latest version.