Adding more than one title to a clip - is this possible?

Hi I have a 30 second clip, for the first five seconds I want to add a title, then for the next five seconds a different title, etc. Sort of like subtitles as the clip runs along.
Is there anyway to do this? Once one title is dropped on the clip, it won't let me drag another on to the clip frustratingly!
Also....is there anyway of getting vids to play produced on imovie 06?

It's a little less than straightforward but not particularly complicated.
Once your title is in your clip you can add a second title to the same clip but im08 seems to want to leave a little gap (won't let me add a second title anywhere in the first 10s ish, so I add it after and slide it along to where I want it once it has dropped into place.
If my clip isn't long enough to give me 10s ish and enough room for a second title, I'll drop the title on a second clip and slide it back to where I want it.
Providing video from im6 is exported in the correct format, im08 will accept it, try exporting as DV or AIC depending on what your source video is.

Similar Messages

More than one role for a clip.Is it possible?

Is it possible assign more than one role for a clip?
thx

Only one video role, only one audio roll, per clip. Only one as these are "Media Stems", and when you work with Stems, only one roll per asset video, one per asset audio.

Can't add more than one title over single clip

This is the first time I'm using a clip that is unedited apart from a title card over black at the beginning that dissolves into the clip and a dissolve to a still photo at the end of the clip. So far I have only been able to add three titles: the first over black, the second over the actual clip, and the third over the still photo.
The clip lasts around a minute so I want to add titles as it progresses. For example, the first title can last for 5 seconds, then a gap of 10 secs. and then another title for 5 seconds, etc. Every time I try to drag the title
Every time I try to drag a title into the project, it doesn't "take." Does iMovie not allow a string of titles if there are no edits within the actual clip?
Thanx.

This applies to iMovie 08:
1) It appears that when you drag a photo or a title to a long clip, then by default, it thinks you want a long photo (or title). It seems like it wants to make the photo 25% or more of the length of the clip. This is why it is hard to drag multiple photos to a clip. The last photo you drag is trying to take up 25% plus of the clip, and there may not be room.
I found a good workaround. I added a dummy clip that was 4 seconds long to the end of the project. (This clip to be deleted before sharing the project). When I drag a new photo to the project, I first drag it to the dummy clip. Now the photo has a duration of exactly four seconds, and I can drag it to the place I really want it. It fits now, because it is only four seconds.
2) I confirmed that when you put over 4-5 photos into a single clip, they will start behaving erratically. One will not show up, and another will show up twice.
The solution is to split the long clip into multiple clips. I had a long clip. I split the long clip into 30 second chunks. To do this, I imported the entire clip several times. Then, in the first instance I selected from frames 00:00 to 30:00. In the second clip I selected frames 30:01 to 1:00:00. Then 1:00:01 to 1:30:00. etc. This way, I did not lose any footage, but I had multiple virtual clips, where before there was only one. Now I was able to add multiple photos to each of these shorter clips with no trouble. And I only needed four photos per clip. It worked great.

In iMovie can i layer titles...using more than 1 title on a clip?

In IMovie can I (or how do I) layer titles ... using more than 1 title on a clip?

Some useful articles that may clear things up for you...
How to use multiple iPods with one computer
http://docs.info.apple.com/article.html?artnum=300432
Using iPod with multiple computers
http://docs.info.apple.com/article.html?artnum=61675
Managing content manually on iPod
http://docs.info.apple.com/article.html?artnum=61148
iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920
Patrick

In Imovie '11, how can I drag more than one set of video clips to my project?

In Imovie '11, how can I drag more than one set of video clips into my project. I know how to highlight in yellow and drag the set, but can I drag a group of sets? Thanks

To select multiple clips, hold down the command key as you click multiple clips. Then you can drag them all at once.
To drag all clips at once, select one, then Edit/Select All. Then drag them all.

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

jhb3243
What version of Premiere Elements are you using and on what computer operating system is it running?
In the case of this theoretical lower third to be applied to more than one title at a time
a. Is there text in the lower third besides a graphic of some kind?
b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
Thanks.
ATR

Adding More than one document to a cell in a dataform

Hi All,
I am using EPM 11.1.1.1.0 .
I have a planing application and I need to add three documents to a cell in a data form.
Is there a way i can do this...
I can add one document and can open it as well but did not find a way of adding more than one document. Is it supported on Hyperion Planning ?
Also if we have a document attached to a cell text ...Is there a way to print it out from Hyperion Planning or Workspace?
Regards.
Alicia
Edited by: Alicia on Aug 6, 2009 6:39 AM

Hi,
I believe it will be just one document, I say that because when you go to the cell and choose open document then it is aimed at opening just one document.
As for printing from cell text, you would have to open the document first before being able to print.
Cheers
John
http://john-goodwin.blogspot.com/

Adding more than one song to a slide show in Elements 11

Most of my slideshows are longer than one song and I get tired of it just repeating. Can I have more than one song in a slide show and how do I do this?

I like to use different songs for different parts of slide shows and also to edit out some of the extra verses in some of the songs I use, so what I do is to use Wavepad (free download) to edit the desired songs. I save each one in a separate file (adding a descriptor such as "short" to the original title). Then, I open a new file in Wavepad, save it as the name of the slide show (such as Graduation Medley), then copy & paste each song from its respective file, in the correct sequence I want them to play into the new file. Be sure to save at the end, in between, all the time.
I go back to iTunes and import the new file into the Library. Then I go back to iPhoto, select the relevant slide show, click on the Music button and select that file for my music for the slide show. I then go to the Settings and click the button that says "Fit photos to music".
You can also create a playlist from the edited files and add the playlist as specified in the other posts.
When previewing the slide show, if the music for the 2nd section starts too soon or too late, I adjust the time for a couple of beginning section's slides, add an extra one in, or maybe even reedit the music.
Hope this helps.

Can I make more than one edit in a clip in Imovie?

I converted a VHS tape to an MPEG 4 file and wish to edit multiple portions of it. The tape was converted and is only in one clipping. I'm new to IMovie and can't seem to be able to make more than one edit. Where have I gone wrong or is it not possible? Any help would be appreciated.

arosenberg wrote:
... I'm working with IMovie 6.0.3
This info was essential - iMHD6 aka 'iMovie-a' was a totally different app compared to iMovie-b, versions 08, 09 or the actual vers11, which are the main theme on this board ...-
afair, select the clip in the 'bin' on the right hand side.
select your in- and Out-point in the large Preview window with the sliders or by simply hitting the keys i and o
drag from the preview window into your timeline
repeat steps ....

Adding more than one enhancemnet in a Project

Can we give more than one enhancement in the Project(while giving in CMOD transaction)

Hi
Yes
You can add more than one enhancement(SMOD) in a single project(CMOD)
But one enhancement(SMOD) can not be added in 2 projects
<b>Reward points for useful Answers</b>
Regards
Anji

Adding more than one 10 digital number to Digital Life

Just signed up for Digital Life and the biggest complaint I have right now is not being able to add more than one cell phone number to receive alerts/notifications. I did chat and they told to add the following as an email: [email protected] or [email protected] and neither of them worked on two different At&t cell phone numbers!!!! My head wants to explode to think of crazy it sounds you cant add more than one number!!!! And top it off - their "workaround" doesn't work. At&t PLEASE PLEASE fix this issue. Makes NO sense at all.

I'm sorry to hear you're having issues adding additional mobile numbers to receive text alerts. The information you received is in-fact correct. Ensure you are not including dashes in the mobile number (Example: [email protected]). Also, make certain your program is created correctly to send the notification.
If you're confident you have taken the necessary steps we'd be happy to work with you on resolving this matter. Please share a little more information with us by clicking here to send Digital Life a private message. In your message please include:
Your name
Account number
Address
Contact number and the most convenient time to contact you

Adding more than one photo per frame

Is there a way in iMovie HD 5.0.2 to show more than one photo at a time that is imported from iPhoto?

I LOVE to support Christian's little company, but.........
… use any pic processor (PhotoshopElements), make your "compositing" and add THAT into iMovie....
made a long time ago some nice effect, people asked me "how?!" by making a gigantic pic, containing 8 stills, and using the KB effect to "jump" from one pic (part) to the other…
in PSE you can create a "pile" of pics, then zoom in to the wanted pic (which starts to live, but that is another story..... )

Adding More Than One Movie to a DVD

I am making iDVDs that are just about 15 minutes long. Since the dvd I am using holds up to 4.7 gigabytes, I would like to add more than one movie to a dvd project. How do I do that?

Look in the folder of an iMovie project. Let's say the project is called "My Great Movie"
There should be a small file with the name "My Great Movie.mov" That is the reference movie.
If you open iDVD directly rather than from iMovie and create a new iDVD project, just drag the reference movies onto the iDVD window and it will add the movie to your project.
On the finished DVD, you pick a movie to play it. When that movie finishes, it puts you back to the main menu to pick another.
Does this sound like what you want ?

Adding more than one movie to iDVD - possible or not?

I assumed that you would be able to drop more than one imovie into a iDVD project and that it would add them as different menu items but it won't do it. Am I trying to do what is not possible? Any help is appreciated cheers!

Hi Cheeba
You got a very good link from Sue but it is fairly easy to describe.
A. Make Your movies in iMovie. (You can make them in one session but
it is easier to make each as an individual project)
B. Close iMovie
C. Locate Your moviprojects. Folders for iMovie 1-4 and an icon for v.5
(if icon: Ctrl-click on it and select show package)
in this there is a folder Share movie and in this a folder DVD. Here You
will find a QT.mov file with Your project name. Take this and drop it into
an open iDVD theme window (just inside the edge of this window).
repeat for the other movies.
OK that's all there is to it. You can try dropping the project folder/icon
instead of open it - it is supposed to work.
Yours Bengt W

Adding More Than one at a time

Can you add more than one chapter marker at a time? I have a large project that I would like to add a chapter marker every five mintues - automatic would be nice. Can FCE add chapter like that?

Thanks... I was hoping there was a plugin or something.

Adding more than one title to a clip - is this possible?

Similar Messages

Maybe you are looking for