Adding MPEG-4 Movie

I recently updated my computer and itunes and I can no longer ad my own mpeg-4 / mp 4 movies to my itunes.

Make sure you have the latest version of QuickTime or repair your Quicktime in Control Panel > Add n Remove Programs > highlight QuickTime and click CHANGE then REPAIR

Similar Messages

  • HT3775 I have a bunch of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document "001.MPEG" could not be opened. A required codec isn't available." Any advice on getting these to play?

    I have a slew of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document “001.MPEG” could not be opened. A required codec isn't available." Any advice on getting these to play? Thanks!

    Try installing Perian or VLC. Some AVIs require a codec which simply isn't available for Mac OS X.
    (85018)

  • Settings changing when adding to another movie

    Each time I attach a new chapter (mini movie) PROJECT to the already existing main movie PROJECT the settings change. I have tried adding on the front with the new chapter as well as trying to add the main movie to the mini movie. Is there a way to lock all settings on a movie so when it is added to another movie the setting won't change oon either clip. The chapter movie is approximately 1 1/2 minutes long and the main clip is approximately 9 Minutes long. There are several transitions, and scrolls included in both clips.
    Message was edited by: jimfromdenver

    Hi Luis, thanks for the reply. I first made a video approximately 8 minutes long. I used digitized video, still images, sound tracks, titles and numerous transitions between the clips. I then opened a new project and made a movie of one of the last letters sent home by the veteran prior to his death. I also used transitions, movie clips, titles and various images. So far I have three of these last letters completed. I was able to copy and pasted two of the letter clips in front of the main generic movie. However, when I attempted to paste the third clip at the beginning of the main movie and two letters - it causes some of the titles, scrolls to overlap.

  • Project pane greys out after adding either HD movie footage or a photo'

    Project pane greys out after adding either HD movie footage or a photo' into iMovie '08. Since using a HD camcorder, quite often, after adding either HD movie footage or a photo', the project pane greys out. I have to exit the project and re-enter to continue viewing the project; this is tiresome. Any thoughts or is this yet another iMovie '08 bug?

    blackcomb greens wrote:
    PS ~ what is the plist?
    every app as a preference list, which can get corrupted.
    quit iM
    look in user/Library/Preferences for a file called com.apple.iMovie(x).plist (x stands for any number) ....
    trash that.
    restart iMovie..
    it doesn't hurt your projects nor does it touch any files.. it just 'resets' an app.. => slapp on backhead.. as I like to call it..
    yes, hardware is nice, as long as you don't dare to handle AVCHD .. that is on Intel Mac only..
    all Folders (Project/Events) is on local harddrive?
    no plug-ins installed (DivX etc)?

  • .mpeg to .mov converter

    I have all my videos in .mpeg format, and i was just wondering if anyone knows a good .mpeg to .mov converter so that i can play these movies on my iPod 5g, thanks.

    PSPWare (free), Forty-TwoDVD-VXPlus ($2499), Export2QT ($15), and MPEG2 Works 4 ($25) will all convert MPEG1 files to iPod compatible files in a seamless process. MPEG StreamClip will convert the file to an intermediate file format with separate audio and video streams which can them be converted to iPod compatible format by QT Pro, MoviesForMyPod (Free), or Podner ($15) or other QT based scripted applications.

  • Importing MPEG and MOV

    i have been trying to import MPEG and MOV files to iMovie 08 without any success.
    the movies i have already previously copied to my HD, or have been copied for me, so I am not copying them from any camera.
    The funny thing is ... when i look into my iPhoto library from iMovie he does recognise the videos i have copied directly from my digital photo camera, but i can't just copy any MPEG or MOV files from any other location, previously copied, to my iMovie library.
    Does anybody here have the same problem as me?

    Does anybody here have the same problem as me?
    Everyone will have this problem. It is the way iMovie '08 is currently programmed. The basic problem is that most users fail to realize that there are three distinct levels of support in QT based applications:
    1) Playback Support - This simply means a particular compresion format can be played in a QT application. E.g., MPEG2 video is not normally supported without the QT MPEG-2 component while MPEG1 and H.264/AAC files are both playback compatible as they are.
    2) Conversion Support - This means a file can be "properly" converted to another compression format. In this case, "muxed" formats like MPEG1 and MPEG2 (even with the QT MPEG2 component) cannot be converted to another compression format by QT applications and retain their audio content while H.264/AAC files can.
    3) Edit Support - This means that certain operations can be performed on the audio and/or video content at the frame level. QT applications can, for instance, segment the audio and video content of an H.264/AAC file at any frame but since "muxed" files like MPEG1 and MPEG2 files consist of "blocks" of audio data interspersed with "blocks" of video data in a single stream, segmenting a file at any point other than one where a "group" of such "blocks" ends/begins would mean the loss of many "frames worth" of either audio or video data. AVI has a similar problem. Since the "instances" of audio and video data mesh like the cogs of two wheels, segmenting an AVI always leaves a 1 frame deficit between the number audio frames and the number of video frames. (Ever wonder why you end up with that one "white" frame at the end of youe file?)
    Now we come to the various types of QT based applications. Many, like iPhoto and iTunes don't really look at the files when they import them, so they are more than happy to import anything they can read and recognize. If a file can be played in the QT player, it can be played in both iPhoto and iTunes. On the other hand, some applications are a bit "picky" about what they will export. iTunes, for instance, will not export/sync a file it has imported if the target device cannot play it. iMovie '06 is also different, in that it will import anything it can convert even if it can't convert it properly -- i.e., an MPEG1 file will be converted to DV video but lose any audio that may have been contained in the file. iMovie '08 takes things to a new level. Since imported files are simply moved/copied to "Events" folders in their original compression format, iMovie '08 first checks to see if the files contain both audio and video data that can be edited at the frame level. If both cannot be edited at the frame level, then iMovie '08 will not allow you to import it. Camcorder devices, however, are handled differently. Since most content on tapeless models are not stored in a QT edit supported format, these files, as well as HDV, are converted to an intermediate codec (which can be edited) as part of the import process.
    As to digital cameras, many manufacturers store their video clips in generic file containers. Just because a Kodak digital camera stores its data in an MOV file container, it does not mean bothe audio and video compressions formats can be edited in iMovie '08. Many Kodak models, for instance, store their video clips as MPEG4/µ-Law 2:1 files. Unfortunately, while the iMovie will accept the MPEG4 video, it doesn't like the µ-Law compressed audio. Same holds true for many Casio digital cameras which use Motion JPEG/DVI ADPCM comressed formats. Once again, iMovie has no problem with the Motion JPEG video content but refuses to accept the DVI ADPCM audio. Luckily, users have two options here. They can either convert both the audio and video to an iMovie '08 edit compatible compression format or simply convert the audio content and "re-merge" it with the original video for maximum quality. And, of course, MPEG1/2 "muxed" files or M2V files with unsupported audio compression formats must be converted for the reasons already mentioned above.

  • HT3775 I can't open MPEG 4 -movie files with Quick time or VLC

    I can't open MPEG 4 -movie files with Quick time or VLC

    VideoLAN - Download official VLC media player for Mac OS X

  • Quicktime X will not play some Apple Mpeg 4 Movie Files

    Hi,
    Having a strange issue.  Quicktime X will not play some of my Apple Mpeg 4 Movie files anymore.
    The files open fine in Quicktime 7, but not Quicktime X. 
    I receive the error message "The document could not be opened. A required Codec is not available"
    I have installed other codecs (Flip4Mac as well as Perian), but no luck.  Have re-installed Quicktime X (10.1) and software is all up to date (running Lion 10.7.2).  The movie file works fine if I import it to iTunes as well.
    Called AppleCare Support and they could not come up with an solution.  Does anyone here have any ideas?
    Thanks!

    (BTW, I just realized this was an MPEG-4 topic - my issue wasn't necessairly centered around that architecture)
    Yes, I naturally assumed that you were having problems at some point with MPEG-4 Part 2 or Part 10 content.
    Since I mentioned "from," I should have mentioned what the codec/wrapper was (it was captured into a .mov file using DV/NTSC via "Capture Now" in Final Cut Pro studio V7, via an analog-to-digital converter).  What makes this confusing is that files captured with the same settings sometimes open right into QuickTime X with their audio/video intact, and at other times, only the audio shows up (where upon opening that same file in QT 7, we can see both audio and video). Interestingly, the problem files icon shows up on the desktop as the generic movie icon, whereas the "normal" files' icon is the first frame of the video.
    May we assume at this point that the source video data is DV-25 with 16-bit Interger (Linear PCM) audio sampled at 48.0 KHz and it is the scratch MOV file that may or may not open/play correctly in QT X but always opens correctly in QT 7?
    Ultimately, though, this is an unimportant point in solving my issue. Why? Well, if I can successfully open the problem files in Compressor (e.g., see/hear the video/audio), then I can theoretically re-compress (or "re-wrap?") them to whatever codec I want - ideally one 100% compatible with QuickTime X.
    I took a test file, placed it into Compressor, and applied the DV/NTSC setting to it (yes, I know, the same setting the file already had). After re-encoding (which took very little time), the file was perfectly executable in QuickTime X - both Audio and video showing as to be expected, and no real difference in quality (not that VHS source is quality to begin with).
    This sounds as if the "problem" file's container may be the source of the problem. As I don't know if your Compressor test is passing the data through to a new faile container, I would make an additional test here. If your version of QT 7 is keyed for pro use, I would simply use the "Save As..." File menu option to to create a new file container. In fact, I would probably just create a "reference" file rather than another "standalone" file here—a very, very fast operation—and then open the secondary file in the QT 7 "Properties" window to ensure all of the data tracks (1 video, 2 audio, and 1 timing) are present. If all looks good, I would then try opening the reference file in QT X to see it it now plays. (I.e., whether you use a reference file here or a standalone file, the object is to see if the QT X player will now recognize all contained data tracks whether resourced by reference or physically contained in/via the new wrapper.)
    Could this have been answered without knowing the complete "from" specs? Probably… which is why I posted to the help forum in the first place - the goal being some other reader may have had the same issue, and had a handy solution or suggestion, saving me the time of experimentation (what forums are great for).
    I don't know about you, but I would still be looking at profile/level combination settings to see if an an assumed MPEG-4/AVC video and/or AAC audio settings had been properly encoded for QT playback.
    I have no doubt that there's a technical difference between the files that created this issue in the first place. But, the solution of re-compressing with an identical codec did the trick, which for this project is good enough for me.
    Recompressing data is slower than rewrapping data which is slower than rereferencing the data pointers. But, if your solution works, then that is all that matters.

  • Protected MPEG-4 movie

    I have a catalog of personal M4V/H.264 files and have "set all" these types of files to open in Quicktime X because I find the default iTunes extremely annoying.
    QuickTime seems to think that all M4V files are copy protected content and writes "Protected MPEG-4 movie" as the file type unilaterally.
    What's going on with this? The UTI declaration is wrong. Will this in any way affect/block the use of these files in other applications or using externally? Not sure - what exactly does being labeled as "protected" do? (Something looming for iOS?)
    Alternatively if one sets M4V files to open in iTunes, they are not seen as protected file types.
    hmmm

    Something is not right. An M4V should not be assumed to be protected content.
    Correct. However, problem seems to limited to your system. I have no problems playing files generated using the same work flow in both QT 7 and QT X on Snow Leopard platform or QT 7 on older PPC G5 under Leopard. Both are running under latest respective versions of the OS.
    If you have a spare external drive, I would recommend creating a "pristine" minimal start-up system and try the same files while booted from that drive. If they work properly, then the problem is likely a corrupted main system or embedded QT structure in the main OS. If files are still bad, I would install HandBrake on the external start-up drive and make a few test files to eliminate the possibility that the files themselves were somehow corrupted during creation but this seems less likely here since the files "can" play correctly with modified extension.
    Using the "Save As... Movie" (QT X) or "Save As..." (QT 7 Pro) option will copy the M4V file data to a "real" MOV file container (i.e. internals will match extension) or the "Save As..." option in MPEG Streamclip can copy the M4V data to a "real" MP4 file container. This would be a temporary workaround if you want your original data in properly headed containers that avoid your current problem (based on what you said about changing the file extension), but does not really address the real problem here. (Am assuming the files do not contain extraneous data tracks that MPEG Streamclip would filter out during the copy and that you have not mismatched the Snow Leopard embedded QT structure with the wrong QT X Player app.)
    In any case, once the problem is isolated, I expect you should be able to fix it.

  • Convert or Play ENTIRE MPEG-1 movie (.mpg) on Quicktime

    I have an mpeg-1 movie (.mpg)117mb. I tried to watch it on QT and it only plays about 1 minute of a 10 minute movie. When using a windows media player, the whole thing plays. I tried converting with streamclip AND Tubetv but only the first minute converts.
    Any help will be GREATLY appreciated.
    skip

    If this is the case AND I have to manually set it to fix time code breaks, how do I do it manually?
    "Command-F" or use the "Fix Timecode Breaks..." Edit menu option.

  • The aspect ratio and dimensions of the MPEG-4 movies are distorted horizontally when I transfer them either from my macbook pro or my Lacie external drive to my new iMac.  What can I do?

    I just bought a 27" iMac with an intel core i5 processor.  Most programs and files have tranferred successfully.  The dimensions of the MPEG-4 movie files have been horizontally distorted.  What can I do to correct this problem and prevent the dimension distortion from occurring in the future.

    Hi landonw
    The HD will probably have to be removed from the MacBook Pro and connected to a USB adapter or placed in a dock to get your data off of it. I would take the MacBook Pro along, the folks at the Apple Store should be more than happy to help transfer your data to a new iMac.
    {quote:}All I am really concerned about is my iTunes database and my firefox profiles.{quote}
    What no BACKUP'
    To protect your data in the future, pickup a USB External HD +(for under a $100)+ and use Time Machine.
    Dennis

  • HT3775 MPEG-4 movie the quick time I get the following msg---1080p.mp4" could not be opened. The movie's file format isn't recognized.

    MPEG-4 movie the quick time I get the following msg---1080p.mp4” could not be opened. The movie's file format isn't recognized.
    Is there any way to make the movie work....anybody can help????

    Hi,
    Not all .mp4 items are created equal as there are many subvariants.
    You may want to Install Perian and/or Flip4Mac
    8:57 pm      Monday; January 27, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I cant watch MPEG-4 movie format on my iPad2

    I have an HD HERO Go Pro camera.  It records videos in the MPEG-4 MOVIE format. I am unable to sync these videos to my iPad2!  Any reasons why... or ways to help me out?

    Has to conform to these specs:
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • MPEG-4 movie

    hello all! having a bit of trouble with a downloaded mpeg 4 movie. have never seen this format before, and my quicktime on my PC is unable to play the video. i have audio, but no video. is there some kind of plug in or codec that i need to get for my quicktime to be able to play this file?
    thanks for the help!
    Toshiba PC   Windows XP  

    oops...looks like i downloaded just an audio file when i thought i was getting both video and audio...solves my problem!
    thanks!

  • Mpeg-4 movie shows up when synced but after ejecting ipod the file is gone

    I downloaded and saved a 25-minute mpeg-4 movie. I opened itunes and successfully transferred the movie and then converted the file format. itunes shows that I have a folder called movies under library and also a music video folder. I've managed to get the movie to show up in both of these folders.
    The problem is that neither of these folders are shown on my ipod and even after syncing there is now way for me to find the movie file. I'm not sure what to do since this is the first time i've tried to download/sync/watch a movie.
    I have a color, 20g ipod.
    thanks,
    rob

    I guess I do have the Ipod photo but there is a pre-installed folder on my ipod that is labeled music video - hmmm......
    Also, I took some 15 minute videos with my nikon digital camera and they were stored on my computer as quicktime movies (.mov). When I transferred photos taken from the trip these movies transferred to my ipod and played perfectly. I didn't do anything or download any special software. So I assumed that this was a feature of my ipod.
    Any other comments?
    Rob

Maybe you are looking for