Adding MSE from VMware to Cisco Prime

Hi Guys,
I'm trying to register MSE 7.4 on installed on VMWare to Cisco Prime running on version 2.1 but it seems like i'm getting this issue every time i do: 
"No response from server. It may be unreachable, or server is down or HTTPS connection to server failed"
I'm sure that the IP address is correct
I'm sure that NCS username and NCS password is correct
I can ping MSE from MSE (hehe)
I can ping Cisco prime from MSE
I also tried to re install MSE on VM but i'm still getting the same error message.
How can this be fixed? thanks

 Migrating Cisco WCS Licenses to Cisco Prime NCS Licenses
The Cisco Prime Network Control System uses a single-tier license model. When Cisco WCS BASE or WCS PLUS licenses are being migrated, licenses will be mapped to the new Cisco Prime NCS single-tier model, as shown in Figure 1. Customers are able to migrate their existing WCS licenses by purchasing the migration SKU (L-WCS-NCS1-M-K9) as also indicated.
For more information please refer to the link-
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/guide_c07-653879.html

Similar Messages

  • Cisco prime guest user email

    hello
    when adding a guest in the cisco prime there is a option that you can print or email the user details.
    is it possible to change the print page and the email that is send.
    a need to add other picturen and change the template of the email and printing
    thanks

    Hello,
    The logo on the page which would be printed with the guest user credentials can be customized. It can be done from:
    Administration > Users, Roles & AAA > Users > Click on the User name for 'Lobby Ambassador' > Click on the 'lobby Ambassador Defaults' tabs & scroll down to see the 'update Logo' option.
    The details of the emails/credentials format can't be customized.
    Ram.

  • How view snmp Traps CISCO PRIME 1.2

                       It is posible to view snmp Traps from WLC to CISCO Prime ?? How ?

    Hi Steve :
    I need to view the traps which are generated in the Controller, I need to view that in the Cisco Prime Infractructure. I´ve configured Communities in WLC with IP Address to Cisco Prime and Trap Receiver with IP address to Cisco Prime.
    Now, How can I view these Traps in the Cisco Prime ?.
    Another question , Is it posible to configure Switch from Cisco Prime ?
    Thanks,
    Claudio

  • Installing cisco prime on vmware & migrating from wcs

    Hi,
    We have been tasked to install prime on a vmware box then migrate from wcs, i have never done this before & was wondering if anyone has any experience in doing this way, how easy is it & if you have any docs etc?
    Cheers
    Sean
    Sent from Cisco Technical Support Android App

    Hi,
    A  direct upgrade from a WCS release to Prime Infrastructure 1.2 is not  supported. You must first upgrade to an NCS 1.1 release, and then  upgrade to Prime Infrastructure 1.2.
    Please check the links below:
    Cisco Prime Infrastructure Configuration Guide, Release 1.2
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/tasks.html#wp1215225
    Release Notes for Cisco Prime Infrastructure, Release 1.2
    http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/release/notes/cpi_rn.html#wp73605
    WCS to NCS or Prime Infrastructure?
    https://supportforums.cisco.com/thread/2176121

  • New installation - Cisco Prime from OVA on VMWare

    Hi,
    I have just imported Cisco Prime OVA and followed the setup and entered the IP Address, hostname, DNS, Gateway etc etc... When I attempt to enter via the URL https://CicsoPrime01 it doesn't accept the connection. I'm able to ping to the CiscoPrime machine, but can't get in.
    I searched and saw some troubleshooting steps such as ncs status, ncs start....
    Result:
    /opt/CSO01umos/bin/wcsadmin.sh no such file or directory....
    Any help?
    Thanks,

    if an ncs status returns :::: /opt/CSO01umos/bin/wcsadmin.sh no such file or directory...::::
    I would bet your installation is no good.
    Please redeploy the OVA

  • Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Prime Infrastructure/ Assurance is  positioned today more towards managing network elements and network performance,  rather than server infrastructure. We are in the process of adding Datacenter  component support, with more focus on Nexus and UCS- due later this  year.
    Having said that, Prime Infrastructure allows the system user to  add custom SNMP polling templates, which can then be used for polling any SNMP  based values from any SNMP enabled device. These can be used to collect the  information you specified below and the polled information will be available in  dashboards and reports.

  • Cisco Prime Collaboration Deployment with BE7K and VMWare license

    Hello, I am looking for some help trying to figure out if Cisco Prime Collaboration Deployment can be used to upgrade our existing 7.1.5 cluster.  From what I have read there is a API problem with the VMWare license that comes with the BE7K.  But after reviewing the BOM/quote from my VAR it lists the foundation license which based of the release notes is supported.
    UCSS-U-VMW-FND-5-1
    UCSS Cisco UC Virt. Foundation  Five Year - 1 server
    Has anybody out there had expericne with PCD and BE7K'?
    This is from release notes of PCD
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_P139675A_00_pcd-rns-1051/CUCM_BK_P139675A_00_pcd-rns-1051_chapter_010.html
    Search for “Business Edition 7000” and it will state it is not supported with PCD.  It is because the licenses that the BE 6k and 7K are shipped with don’t enable certain VMware APIs that PCD needs.
    “Virtualization Software License Compatibility
    Cisco Prime Collaboration Deployment is not compatible with all license types of VMware vSphere ESXi, as some licenses do not enable required VMware APIs.
    The following are compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Foundation (appears as "Foundation Edition" in vSphere Client)
    VMware vSphere Standard Edition, Enterprise Edition, or Enterprise Plus Edition
    Evaluation mode license
    The following are not compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Hypervisor (appears as "Hypervisor Edition" in vSphere Client)-preloaded on Cisco Business Edition 6000 and Business Edition 7000
    VMware vSphere Hypervisor Edition
    Any help would be appreacted.
    JP

    Thanks Jamie for repsonding, we haven't made any purchase's yet but I wanted to ensure we are purchasing a solution that won't lead to a lot of frustration.  We only have 1000 phones so we are pretty small and the BE7K seems to be a good fit and value.
    Cheers,

  • Deleted WLC from its folder under the Device work center of Cisco prime 1.2

    I kindly need  your help as regarding cisco prime infrastructure.
    I added the wireless LAN controller to the prime. I later had to troubleshoot the WLC because the reachability status showed UNREACHABLE.
    Due to my troubleshooting, I synched the WLC a couples of times and the collection status has been showing SYNCHING since then.
    I also tried deleting the WLC from its folder under device work center and it deleted but it still reflects under the ALL folder.
    Please would I have to wait for the SYNCHRONIZATION of the WLC to stop before I can completely delete it and re-add??
    Also I noticed that after deploying ''Interface Health'' under Monitoring Configurations, the CPU and memory utilization did not reflect for the devices cisco
    prime is managing.
    What have I missed out?
    Kindly help.

    Prime Infrastructure won't support those legacy models.

  • VMware Tools on Cisco Prime LMS 4.1

    Hello,
    I have just installed Cisco Prime LMS 4.1 from .ova file on a VMware architecture. My customer wants to know if the server is compatible with vmware tools.
    I looked over Cisco documentation but it is never mentionned.
    Has someone allready take a look into that ?
    Thanks,
    Regards,
    Abel JULIAN,
    Nextiraone FRANCE.

    Yes, the datastore is located on a remote SAN so the original source won't be impacted by the loss of the ESXi. But in a perfect world (with VMtools), Vmotion will move VM from one ESX to another in case of failure, performance problem etc.
    Those functions won't be accessible here, and the VM will need to be restarted manually and reaffected to another ESXi in case of failure. Like I said before, the LMS server is not a critical application so that is not a huge issue. The important is to know that Cisco does not support this feature.
    Anyway, I have my answer so it is ok for me, I will notify my customer.
    Thanks you for your time,
    Regards,
    Abel

  • Cisco Prime Rogue AP Report - No Rogues from 3702 Series AP's

    I am running Cisco Prime Infrastructure (2.1) that manages a Cisco 5508 WLC (7.6). We have multiple version of AP's managed by this WLC to include 1142, 2602, 3702, etc...In Cisco prime when we run a Rogue AP Report. None of the Rogue AP's discovered by 3702's are displayed in the report. The Rogues show on the WLC though from all AP's. Cannot find a reason for this. Any ideas?

    The Rogue alarm state always stays on "removed" once deleted
    CSCuo91446
    Description
    Symptom:
    Once one of the alarm of rogue AP is deleted the newer rogue AP alarm changed to removed state even for different mac address.
    Because of the removed state the detecting AP which detected the rogue is not displayed
    Conditions:
    1) Auto SPT is turned on
    2) Prime 2.0 or 2.1
    Workaround:
    Click on refresh from network for each alarm in removed state or disable auto spt
    Last Modified:
    Jun 30,2014
    Status:
    Fixed
    Severity:
    3 Moderate
    Product:
    Cisco Prime Network Control System Series Appliances
    Known Affected Releases:
    (1)
    2.1(0.0.1)

  • How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

    How can I get CDP neighbor information from access point reports in Cisco Prime 2.0?  I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point.  I thought that information was in there, however I cannot seem to find it.
    Thanks in advance!

    Hi
    You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
    Regards
    Rasika
    **** Pls rate all useful responses ****

  • Cisco Prime Infrastructure 2.0 - no traps/info are pushed from devices

    Good evening,
    I have setup Cisco Prime Infrastructure 2.0 and,  though I have added manually my 4 network cores as devices without any  problem, I can't get a single trap or a single SNMP information to be  pushed into my Cisco Prime Infra.
    Here is my SNMP config on my core :
    snmp-server user *edited* *edited* v3
    snmp-server  group *edited* v3 noauth notify  *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F
    snmp-server community *edited* RO
    snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
    snmp-server enable traps flowmon
    snmp-server enable traps transceiver all
    snmp-server enable traps call-home message-send-fail server-fail
    snmp-server enable traps tty
    snmp-server enable traps rf
    snmp-server enable traps memory
    snmp-server enable traps cpu_threshold
    snmp-server enable traps eigrp
    snmp-server enable traps ospf state-change
    snmp-server enable traps ospf errors
    snmp-server enable traps ospf retransmit
    snmp-server enable traps ospf lsa
    snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
    snmp-server enable traps ospf cisco-specific state-change shamlink interface
    snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
    snmp-server enable traps ospf cisco-specific errors
    snmp-server enable traps ospf cisco-specific retransmit
    snmp-server enable traps ospf cisco-specific lsa
    snmp-server enable traps flex-links status
    snmp-server enable traps fru-ctrl
    snmp-server enable traps entity
    snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
    snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
    snmp-server enable traps ether-oam
    snmp-server enable traps aaa_server
    snmp-server enable traps flash insertion removal
    snmp-server enable traps l2tc threshold sys-threshold
    snmp-server enable traps power-ethernet police
    snmp-server enable traps rep
    snmp-server enable traps vswitch dual-active vsl
    snmp-server enable traps udld link-fail-rpt status-change
    snmp-server enable traps vtp
    snmp-server enable traps vlancreate
    snmp-server enable traps vlandelete
    snmp-server enable traps auth-framework sec-violation
    snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan
    snmp-server enable traps envmon fan shutdown supply temperature status
    snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail
    snmp-server enable traps port-security
    snmp-server enable traps ethernet evc status create delete
    snmp-server enable traps energywise
    snmp-server enable traps ipsla
    snmp-server enable traps vstack
    snmp-server enable traps bfd
    snmp-server enable traps bgp
    snmp-server enable traps bulkstat collection transfer
    snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
    snmp-server enable traps config-copy
    snmp-server enable traps config
    snmp-server enable traps config-ctid
    snmp-server enable traps event-manager
    snmp-server enable traps hsrp
    snmp-server enable traps ipmulticast
    snmp-server enable traps isis
    snmp-server enable traps msdp
    snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
    snmp-server enable traps bridge newroot topologychange
    snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
    snmp-server enable traps syslog
    snmp-server enable traps isakmp policy add
    snmp-server enable traps isakmp policy delete
    snmp-server enable traps isakmp tunnel start
    snmp-server enable traps isakmp tunnel stop
    snmp-server enable traps ipsec cryptomap add
    snmp-server enable traps ipsec cryptomap delete
    snmp-server enable traps ipsec cryptomap attach
    snmp-server enable traps ipsec cryptomap detach
    snmp-server enable traps ipsec tunnel start
    snmp-server enable traps ipsec tunnel stop
    snmp-server enable traps ipsec too-many-sas
    snmp-server enable traps errdisable
    snmp-server enable traps ethernet cfm alarm
    snmp-server enable traps vlan-membership
    snmp-server enable traps mac-notification change move threshold
    snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down
    snmp-server host *ip-address-edited* version 3 noauth *edited*
    Basically all traps are enabled but absolutely nothing is showing up in my Prime Infra except that my 4 devices are "Reachable".
    Here is a show snmp on the same device :
    sh snmp
    Chassis: *S/N Edited*
    38554534 SNMP packets input
        0 Bad SNMP version errors
        14 Unknown community name
        0 Illegal operation for community name supplied
        0 Encoding errors
        38453185 Number of requested variables
        0 Number of altered variables
        17790703 Get-request PDUs
        20583581 Get-next PDUs
        0 Set-request PDUs
        0 Input queue packet drops (Maximum queue size 1000)
    38490708 SNMP packets output
        0 Too big errors (Maximum packet size 1500)
        0 No such name errors
        0 Bad values errors
        0 General errors
        38371069 Response PDUs
        13 Trap PDUs
    SNMP global trap: enabled
    SNMP agent enabled
    SNMP logging: enabled
        Logging to *edited*, 0/10, 13 sent, 0 dropped.
    Can anyone point out what is wrong or missing in my configuration? I can't seem to single it out myself.
    Thanks
    Jeremy

    Hi Jeremy,
    SNMP traps are shown in the events and alerts section of PI.
    SNMP config looks fine. Can  you run the SNMP debug (debug snmp packets ) .check the logs and see if the device is actually sending the TRAPS to the PI server.
    Thanks-
    Afroz
    [Do rate the useful post]
    ****Ratings Encourages Contributors ****

  • Cisco Prime Infra 2.1 fails to import an image from file

    We have a standard Cisco Prime Infrastructure 2.1 install. The software repository has been built up by importing the IOS images from the discovered network devices. To implement netflow capabilities on some 3750X switches we need to upgrade the IOS on the chassis and the NM card C3KX-SM10G. I was able to download from Cisco Support the 3750X IOS .tar file and import it from my machines local file system. However, the modules tar file c3kx-sm10g-tar.150-2.SE6.tar fails on the upload from my local file system. When I look at the import rob results they are as follows:
      Image collection from source     SUCCESS
      Copying Image to Staging Location     SUCCESS
      Copying Image to Repository     FAILURE
    I've tried to import just the .bin file but this also fails at the same stage as above.
    I've also tried to scp the file directly into the backend file structure with no success into the folder /opt/CSCOlumos/conf/ifm/swim/jobs with the other images (oddly noticed the above .tar file for the 3750X isn't listed with the other .bin files - although is available through the webGUI).
    I need to distribute the NM .tar file across multiple switches and I'd prefer to use Cisco Prime for the job. Any help would be gratefully received.
    Thanks.

    I had (still have?) the same problem with it not copying the image over. I put in a ticket and they told me to upgrade to Prime Infrastructure 2.1-Device Pack 4  pi_2.1device_packs_4-40.ubf which helped but it still fails sometimes.
    I had read a post from another thread about going through software image management to distribute and that seems to work a little better, but still fails sometimes. 
    So I think that there are still quite a few issues in Prime that need worked out.
    We have over many switches that need software upgrades and I was hoping to do it quickly through Prime but I don't want to send out more then one image at a time to switch because I don't want it to fail. So it's a drawback right now, just doing one at a time to make sure it takes.

  • Cisco Prime Infrastructure and VMware 5.5 Cluster

    Hi ,
    We Installed Cisco Prime Infrastructure 2.2 on VMware 5.5 in Cluster Environment. When we disable the HA Admission Control Policy VM Start without error. If We enable the Admission Control We are getting Insufficient Resource available for HA.
    Any idea.
    Thanks

    Hi 
    can you copy & paste exact error what you're getting here?
    - Ashok
    Please rate the post or mark as correct answer as it will help others looking for similar information

  • Cisco Prime on UCS/VMware

    I have provisioned a VMware environment for Cisco Prime. The Network Engineer has already created the Prime 2.1 VM. However the environment created is a 5.5 environment. Now there is some doubt as to Prime 2.1 is supported on VMware 5.5. At present the VM is running. However is there any compatibility/support constrains ? The Servers are C240M3 s.
    Regards,
    Naleendra

    Naleendra, 
    This is a question to Prime folks, here we'd deal with UCS and vmware compatibility. 
    That being said, quick google search away I found this for prime 2.1 
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/quickstart/guide/cpi_qsg.html#99048
    This seems to indicate ESX 5.5 is not among the supported by prime 2.1. 
    M. 

Maybe you are looking for