Adding multiple artwork files to several items on iTunes 11

Hi all.
in previous versions of itunes one could add artwork in several ways one of which allowed for easily adding several artwork files to more than one item at once without replacing the existing artwork.
I am talking about the little square that was on the left bottom corner of the screen and you could chose if you want to watch the artwork for the currently playing song or the selected song. you could paste into it or simply drag onto it. it would add the art work in appose to replace the existing one as happens when you do it from the info window.
this little square disappeared from version 11 and now I am unable to add several files to several items at once.
anyone solved this pickle?

treyer11 wrote:
IThe point is, I could drag and drop previously and have gone backwards in capability which is supposedly against what Apple platforms inherently stand for.
The point is it has not gone backwards in capability. It works just fine. I can drag & drop to multiple selected items just fine.
Something is wrong wtih your install.

Similar Messages

ITunes 9.2 stops adding multiple artwork in multiple selection mode. Help?

Hi everybody,
Since 2003 I've been using iTunes and adding multiple artwork in several tracks at once.
Lets say: I added 10 tracks of a CD to iTunes library, then selected all of them and then right click to choose "Get Info > Multiple Item Information". Then I just dragged and dropped as many artwork pieces as I wanted onto the artwork window, one by one. Clicked OK and voilá.
Now it will only accept one artwork. Following the procedure I used to do, now it will only take the last artwork I place onto the artwork window.
Now the only way to get multiple artwork in a CD is adding all the artwork (lets say the 20 pages of the booklet) one by one in "each track" separately!, which is a pain in the neck.
So now I have to add artwork one by one to each track one at a time.
Is there a NEW way to add multiple artwork on multiple tracks at once in iTunes 9.2?
Screen shot: http://grab.by/51UT
Thank you for your help.

Hi- you might've already figured this out on your own, but:
A) add the first artwork picture (what you want for your cover artwork) using "Get Info > Multiple Item Information" - and close the Multiple Item Information window
B) with the multiple tracks still selected, drag your additional artwork picture items into the artwork panel in the lower left corner of the iTunes window (this is the artwork panel titled "selected item").
C) your additional artwork will be added to all of the selected items. You can click through the artworks using the left/right arrows above the artwork panel.
Obviously you can also use this same method to add that same additional artwork to any other tracks, from other albums, etc. simply by selecting them as well.
Side note, the easiest way to select all tracks from a single album: select the starting track, then use ctrl-shift and select the ending track- all tracks between those two will be selected.
Aaaaaand you're done! Hope this helps!

Multiple Target files as the item in source file

Hi all ,
I am new XI ,my scenario is File to File and my data type structures for source and target are as follows
_Data type for source:     _
Source
      Header     1:unbound
          org       1:unbound
          order     1:unbound
      Item             1:unbound
           itemno   1:unbound
           matno   1:unbound
Data type for Target
Target
     org          1:unbound
     order        1:unbound
    itemno      1:unbound
   matno         1:unbound
In declaration of target data type occurrence of all child nodes are 1:unbounded. And I have used it in Message type and in message mapping for my target message type occurrence is showing as 1:1.
My objective is to replicate this entire Target as the no of times the Item is occurring in source ie for multiple items in source I want multiple target files. For this I have mapped item node of source to Target(parent node). But in mapping test it is only displaying one Target structure for multiple nodes in source. Please Help me in solving this issue .
Full Points will be awarded
Thanks & Regards
Satish.

Hi,
If you want multiple Targerts you need to use UseOneAsMany.
check below link
http://help.sap.com/saphelp_nw70/helpdata/en/38/85b142fa26c811e10000000a1550b0/content.htm
Thanks,
RamuV

Adding multiple swf files to Dreamweaver

I'm trying to upload multiple .swf files to my website with
no luck. I've done this with previous versions of Dreamweaver but
with CS3 I'm finding it won't happen. I've done the Insert ->
Media -> Flash action as before and exported my files to be read
in Adobe Player 8 but nothing then happens after the files have
been uploaded yet locally everything works fine. I've uploaded a
scripts file also but all of the .swf files are linked from
different folders, could this have any effect?
What am I doing wrong?
Chris.

CJR 2007 wrote:
> I'm trying to upload multiple .swf files to my website
with no luck. I've done
> this with previous versions of Dreamweaver but with CS3
I'm finding it won't
> happen. I've done the Insert -> Media -> Flash
action as before and exported my
> files to be read in Adobe Player 8 but nothing then
happens after the files
> have been uploaded yet locally everything works fine.
I've uploaded a scripts
> file also but all of the .swf files are linked from
different folders, could
> this have any effect?
>
> What am I doing wrong?
Generally making sure that the SWFs are at the remote
location where you think they are supposed to be (and where the
code thinks they are supposed to be) as well as making sure that
the active content JavaScript file(s) are uploaded and are present
where the page is expecting them to be. Beyond that, for anyone to
see what is wrong with your page(s), you have to post a link to
your page(s).
Danilo Celic
| Extending Knowledge Daily :
http://CommunityMX.com/
| Adobe Community Expert

Adding multiple artwork in itunes7 - no joy

Another bug with the latest release of itunes or I'm being daft, is anyone having difficulty adding artwork across multiple items? I used to copy the image and select the tracks in the library I wanted to apply the image to and then pasted the picture in the artwork space. Now, when I try to do the same, for more than one track, although i don't get an error message, no artwork appears. I can only add artwork track by track which is ridiculous. Any suggestions please?

That doesn't work indeed in iTunes 7 (deliberate or a bug?).
Alternatively select all tracks of an album and Get Info.
Then drop it in the artwork pane. It will be added to all tracks. That does work.
Hope this helps.
M

Keep getting multiple song files every time I open ITunes

Argh. Every time I open ITunes I have two or three of the same song in my Library. What's worse, when I plug in my Ipod, I end up with two or three copies of the same song on my Ipod as well.
Help!
Much thanks,
Jhawk

McAfee AntiVirus by any chance? See the thread Why does iTunes delete my itunesprefs.xml?
Or it could be an issue with the SC Info folder. See TS1277 - iTunes: Missing folder or incorrect permissions may prevent authorization for details.
tt2

Issue with multiple CSS files

I am having a problem adding multiple css files in an article. When i alter the html close the article then re-open it. RoboHelp changes this and adds 1 css link. See images below. For now I am going to put all styles in one file, but want to know if there is a work around and what others are doing for this.
Before close
After close and re-open

Sorry but RoboHelp only supports one CSS file.
See www.grainge.org for RoboHelp and Authoring tips

How to create list items with multiple attachment files using rest api javascript

In one of user form I am using javascript rest api to create a list item with multiple attachment files. So far I am able to create list item and once created uploading an attachment file. But this is two step process first create an item and then upload
a file.
It create an additional version of the item which is not desired. Also I am not able find a way to attach multiple files in a go. Following is the code I am using.
createitem.executeAsync({
url: "/_api/web/lists/GetByTitle('UserForm')/items(1)/AttachmentFiles/add(FileName='" + aFile.name + "')",
method: "POST",
contentType: "application/json;odata=verbose",
headers: {
"Accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
binaryStringRequestBody: true,
body: fileContent,
success: fnsuccess,
error: fnerror
So somehow I need to combine item attributes along with attachment files in body: param. I visited https://msdn.microsoft.com/en-us/library/office/dn531433.aspx#bk_ListItem but no success.
Appreciate any help.

Thanks Mahesh for the reply and post you share it was useful.
But this does not solve the core of the issue. You are uploading attachments after creation of item and multiple files are being attached in loop. This is kind of iterative update to an existing item with attachments. This will end up creating multiple versions.
What I am trying to achieve is to create an item along with multiple attachments in a go. No item updates further to attach a file.
Please suggest how this can be done in one go. SharePoint does it when one creates an item with multiple attachment.
Thanks for your reply.

Multiple Target Files as the number of times Item in source node

Hi all
I am new XI ,my scenario is File to File and my data type structures for source and target are as follows
Data type for source
Source
     Header      1:unbound
         Org       1:unbound
In declaration of target data type occurrence of all child nodes are 1:unbounded. And I have used it in Message type and in message mapping for my target message type occurrence is showing as 1:1.
My objective is to replicate this entire Target as the no of times the Item is occurring in source ie for multiple items in source I want multiple target files. For this I have mapped item node of source to Target(parent node). But in mapping test it is only displaying one Target structure for multiple nodes in source. Please Help me in solving this issue

Hi Satish,
Use Multi Mappings :
When you create message mapping change the occurence of target from 1 to unbounded. This will allow you to create multiple target structures.
Then map them accordingly as per your need and you can see multiple output in test.
Just you have to be more focused on the context and for that you have to go thro' the mapping documents.
Search related documents on SDN and go thro' them.
Regards,
Shri

Adding local artwork to tracks in itunes without embedding

hi
i am new to itunes, having recently switched from a PC to a Mac, and am trying to add artwork to tracks in my itunes library. all of my artwork is stored in each album folder. the images are typically 300-400kb each (i want high quality artwork for fullscreen playback so have scanned my CD covers) and i have multiple artwork for some albums, so would rather avoid embedding artwork as this could increase the size of an album folder by several MBs. i am aware of the Album Artwork folder for non-embedded itunes artwork that is accessed using the 'get album artwork' feature in itunes 7, but this only seems to work for getting album artwork from the itunes store, which i don't want to do as i already have better quality artwork on my local hard drive. so does anyone know a way of getting images into the Album Artwork folder from a local drive in such a way that they will be recognised in itunes?
thanks
nick.

Check this out ->
http://www.macosxhints.com/article.php?story=200610011
1071871
this method works for adding single artwork images to each album, placing them in the Album Artwork folder as itc files, but for some reason the images aren't picked up for the Cover Version visualisation. And because i want to have more than one image for most of my albums, i think i am going to have to embed all art, unless anyone has any other ideas.
nick

Connect the music file with the artwork file post-computer-crash?

I want to retrieve artwork after restoring my computer?
So my computer (where itunes app data was stored) and my external hardrive (where my itunes library was stored) crashed, but luckily I had my itunes library was stored on dropbox so I have that uploading to my revived computer!
I have access to all my "old computer's" files (via a mounted image file that looks just like an external drive H: )
The "old computer" itunes used my dropbox folder for the library (J:work\Dropbox\Allen's Transfer Folder\iTunes)
my "New comuter" uses a local folder but the contents are exactly the same (C:\Companies\Dropbox\Allen's Transfer Folder\iTunes)
How can I get the artwork data from my "old computer" onto my "new computer" so that itunes will connect the music file with the artwork file?
is there a data file and will they automatically sync to the artwork if they are in different locations?
Thank you for your help, Allen

pfanzier wrote:
… is there any reason i shouldn't delete the artwork folder?
All of my music is from CDs, so all of my cover art are scanned images that I added to the music files in iTunes. My Album Artwork folder is heavily populated nonetheless. Thus, it stands to reason that if you delete the folder, just like every other default item in your iTunes folder it will be recreated when you launch iTunes. If I recall correctly, that folder also holds the data files for building your CoverFlow.
pfanzier wrote:
itunes only demarcates songs whose files are missing with an exclamation point after i click on the song. otherwise everything appears as normal. if i quit itunes and reopen it, nothing is marked with the exclamation point until i click on it.
I personally have never had an issue with missing song links, but based on what I had read on the Macworld forums over the years, when links are lost, people start seeing /!\ next to several tracks in their iTunes library. Of course, most of the instances that I have read about have been after iTunes updates so perhaps it is during the library updating after a software update that causes the automatic detection of broken links. Otherwise, it does make sense that iTunes would not check a link until the user selects an unlinked song, because iTunes does not, and should not, scan your entire library for no apparent reason.

How to add several item to HashMap?

I want to add more than one item to HashMap When I click the "submit" and I want to made a Shopping cart.But I can't add several item to the HashMap.It will clear the content that I added to it When I click the second time.Anyone have good idea?
Mycode is://///////////////////////////////////////////////////////////////////
<select name="item" size="3" multiple>
<option value="jsp">jsp</option>
<option value="asp">asp</option>
<option value="PHP">PHP</option>
</select>
</p>
<input type="text" name="itemnumber">
<p>
<input type="submit" name="Submit" value="submit">
</p>
</form>
<%
String item="asp";
item=request.getParameter("item");
String itemnum="1";
itemnum=request.getParameter("itemnumber");
int itemn=(Integer.valueOf(itemnum)).intValue();
out.println("Your select is:"+item);
out.println("Item number is:"+itemnum);
HashMap cart;
cart=new HashMap();
cart.put(item,new Integer(itemnum));
out.println("Your cart is:"+cart.entrySet());
%>
<HR>
<table border="1" bordercolor="red">
<%
String str="";
out.println("your select:");
str+="<tr><td>"+cart.entrySet()+"</td></tr>";
out.println(str);
%>
Thank you!

Thank you tolmank.It's works well.This is mycode after modify.But I find it also works well if I delete the last sentence "session.setAttribute("lyo",cart);".It must be writen?
/////////////////////////mycode after modify//////////////////////////////////////
String item="";
String itemnum;
String submit;
int itemn;
int oldcartnum;
item=request.getParameter("item");
itemnum=request.getParameter("itemnumber");
submit=request.getParameter("Submit");
try{
itemn=(Integer.valueOf(itemnum)).intValue();
}catch(NumberFormatException e){
itemn=1;
out.println("Your select is:"+item);
out.println("Item number is:"+itemnum);
HashMap cart;
if(session.isNew()){
cart=new HashMap();
session.setAttribute("lyo",cart);
}else if((session.getAttribute("lyo"))==null){
cart=new HashMap();
session.setAttribute("lyo",cart);
}else{
cart=(HashMap)session.getAttribute("lyo");
if(submit.equals("Add")){
try{
oldcartnum=((Integer)(cart.get(item))).intValue();
}catch(NullPointerException ex){
oldcartnum=0;
cart.put(item,new Integer(oldcartnum+itemn));
//session.setAttribute("lyo",cart);
out.println("Your cart is:"+cart.entrySet());
%>
<HR>
<table border="1" bordercolor="red">
<%
String str="";
out.println("your select:");
str+="<tr><td>"+cart.entrySet()+"</td></tr>";
out.println(str); }

Error Message: SWF contains multiple copies of a sound item

When I test the movie I get this error. SWF contains multiple copies of a sound item
This is the action code I am using:
stop();
var sndTrack:SoundTrack = new SoundTrack();
var sndControl:SoundChannel;
sndControl = sndTrack.play(0,999);
on_btn.addEventListener(MouseEvent.CLICK, soundOn);
off_btn.addEventListener(MouseEvent.CLICK, soundOff);
function soundOn(event:MouseEvent):void
sndControl = sndTrack.play(0,999);
function soundOff(event:MouseEvent):void
sndControl.stop();
Everything I created before I added the code works fine. Everything after, doesn't work when published.
Looking for any help!
Thanks in advance.....

This is the message that up in the timeline area when I try to test the movie...
SWF contains multiple copies of a sound item
it does not publish the file.

After installing iTunes 10.4.0.80 "file" "edit" etc items from menu bar at top right corner disappeared -when cursor is put in that spot a darker rectangle appears - similarly tabs for syncing iPhone are invisible

After installing iTunes 10.4.0.80 "file" "edit" etc items from menu bar at top right corner disappeared -when cursor is put in that spot a darker rectangle appears - similarly tabs for syncing iPhone are invisible- and similarly small ovals appear when cursor is placed where tabs should be.

Very many thanks to you, Putaro! Your answer provided the solution. It was a buggy plug-in that turned out to be the culprit.
You're off the hook, Apple, and my apologies for stating that you let a dog run loose. You skated by this time, Apple. But I'm watching you.
But again, Putaro's reference to the plugins I had installed over the years turned out to illuminate the problem. I have several plugins in my iTunes plugins folder, pretty much all designed to add more visualizer functionality. I removed all of them, and ALL of the problems I noted in my post went away, with full iTunes functionality restored.
I began adding the plugins back to hopefully single out the culprit. Among the ones I had been using included fielder, G-Force, Timestrech, volcanokit, QuartzComposer, and Jax. I hadn't used any of them in a while - probably at least a verison or more back in iTunes updates, but iTunes continued to work with all of them installed. Currently, only QuartzComposer continues to work in iTunes 10.4. The rest no longer even show up as visualizer opitons, with one exception. Jax does show up, but does not work. AND THE PRESENCE OF JAX IS WHAT KILLED MY ITUNES.
I looked into it and went back to the developer, and it appears that they discontinued developing Jax some time ago - evidently, it was buggy and crash prone. I remember after buying it, having problems with it - having never worked to its touted potential, but I didn't pursue it, and never uninstalled it. Leaving it in there caused all iTunes functionality to cease with the iTunes 10.4 update.
If you've got Jax installed, consider removing it before updating to iTunes 10.4.
My iTunes is now working right as rain, thanks again to Putaro!
-Jon

How to exreact multiple pdf files from a zip files from application server to presentation server

Hello exprts,
I am passing one pdf file and one text file to zip file in apllication server through my custom program and then downloading it using standard function module to my desktop. its working fine. Then I added another pdf file to my zip file. But only single pdf file is getting download . So can you please help me regardiong this issue?

Dear Experts ,
I finded out the way to extrcat pdf files in presentation server. But now my problem is that I am not able to add multiple pdf files in a zip file. When I am adding new pdf file then older one is not coming in read data set. So please kindly tell me how can I add multiple pdf file in my zip file and again I can get all the pdf files from here.

Adding multiple artwork files to several items on iTunes 11

Similar Messages

Maybe you are looking for