Adding multiple attachments
Hi,
In the standard CRM web UI for sSolution Manager 7.1 SP08 it is not possible to add multiple attachments to a transaction (service request). Now a user has requested me to find out how much effort it would take to fulfil that requirement.
Did someone face this requirement before? And what was its solution?
Kind regards, Rob Dielemans
I mean it is possible, but not in one go. you cant select a bunch of files and add it using the web ui interface, drag and drop is also not possible
Similar Messages
-
Adding multiple attachments to Infopath form for Sharepoint Online
I don't get the option to add a repeating section into the infopath form to allow multiple attachment in the section. I initially created the form from the sharepoint list and not from blank in infopath and then connecting to sharepoint.
Although i would be happy to get the multiple attachments in the same section i would prefer to add an attachment option to each part of the form. Currently i would need to add 10 separate attachments.
Is there code available to do this in SharePoint designer 2013? if yes, can you provide the code in need with instructions?
if there is another way to achieve this then please let me know. thanks
Hi,
Per my knowledge, IWConvertedForms library seems to contain references to all lists and libraries where the item template has been customized to use an InfoPath form.
You can access it through
https://sitename/IWConvertedForms/Forms/AllItems.aspx
However, there is no method to get the template link and download to edit the template.
You need to get both the XML file and the original InfoPath form template that was deployed to SharePoint.
For more information, you can refer to:
How to open an InfoPath form and template that were moved or copied
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Error in adding multiple attachments to Human Task in BPM
Hi
Hope you are doing fine.
My version is 11.1.1.5 without Feature Pack.
I have a scenario where I get a set of documents from UCM, and I have all of them in an array(of type GetFileByIDResult(UCM GetFile Webservice response type)).
Please note that for a single attachment, I'm not getting this problem.
I know that ExecData.Attachments[] takes array of Attachment types.
But I could not create an Attachments[](array type) type data object, What I could create is of type '<>Attachments' which I thought was an array, but not, as it is not letting me associate to ExecData.attachments
So, I've created a variable of type ExecData(say PDOExecData), used a script task, and did XSLT between the array and this new PDOExecData
I've used for-each on the arrayOfUCMOutput, mapped the content, name, etc.
And, now, in the human task association, I've assigned PDOExecData.attachments to Human Task's ExecData.attachments
But I'm getting the following error
XPath query string returns multiple nodes. The assign activity part and query bpmn:getDataObject('taskExecData2')/ns:attachment are returning multiple nodes. The assign activity part and query named in the error message returned multiple nodes. It should return single node. According to BPEL4WS specification 1.1 section 14.3, the assign activity part and query named in the error message should not return multiple nodes. Verify the part and xpath query named in the error message at line number -1 in the BPEL source.
This means htat attachments take a single element, but it should take array of elements, and that is what is showin in the mapper file indicated by attachments[] in the ExecData
Would you please help me in this regard.
One possible solution could be, if I'm able to create an array of 'Attachment' type, I could map to it and finally map this var to ExecData.attachments, but how to create an array of a type in BusinessObjects/ProcessDataObjects
Regards
RaviKiranResolved!
Will write a blog and paste the link
Regards
RaviKiran -
While saving multiple attachments from mail, files with same name are added and not replaced
While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.
Bjørn Larsen a écrit:
Hi all
Hope to get some help with Elements Organizer.
I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference. -
Hi,
I have designed a infopath form which is having multiple attachment control and user will upload multiple documents on it.
The problem in sharepoint infopath form is user's are unable to attach large files which is more than 5 MB (since default limit is 4096KB).
I know we can increase the User session data for Infopath in central admin .But that will impact our server CPU since we want to increase to 50 MB.
I got the other approach which is like storing the documents in sharepoint document library and adding the attachments as a hyperlink in infopath form which will reduce the size of the form and will not affect performance.
Can anyone please provide the detailed explanation and method here(if possible with screenshots)
Thanks & regards,
PooviHello,
I also had same requirement earlier and what i did, i have given the doc library link to infopath form to upload file. Then create new web service data connection to get files from library to infopath and show as hyperlink. Basically you can add one repeating
section with hyperlink control to bind the files in IP.
You may refer this blog and it has explained exactly same approach
http://sharepointvenividivici.typepad.com/sharepoint-customization/2013/01/infopath-show-links-to-documents-in-a-library-from-the-form.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Iam unable to send multiple attachments with a mail using JavaMail?
Hai to all,
Iam unable to send multiple attachments with a email,see
iam have succeeded in sending one attachment with a email.
when iam tring to add two or more attachments to a mail,
it is giving a Exception like this:
javax.mail.MessagingException: IOException while sending message;
nested exception is:
java.io.IOException: No content
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:577)
at javax.mail.Transport.send0(Transport.java:151)
at javax.mail.Transport.send(Transport.java:80)
at AttachFilesModified.sendMail(AttachFilesModified.java:185)
at AttachFilesModified.main(AttachFilesModified.java:43)
this is my code snipnet:
BodyPart messageBodyPart = new MimeBodyPart();
Multipart multipart = new MimeMultipart();
if(body != null)
messageBodyPart.setText(body);
multipart.addBodyPart(messageBodyPart);
/*if(attachments != null)
for(int i = 0; i < attachments.length; i++)
String filename="D:\\nagaraju\\apachi\\axis-bin-1_3.zip";
//String s[]=filename.split("\\");
//System.out.println(s);
//String s1=s[1];
//String filename1=s[s.length-1];
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(filename);
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName(filename);
multipart.addBodyPart(messageBodyPart);
//second file attaching
/*String filename1="C:\\nagadoc.txt";
BodyPart messageBodyPart1=new MimeBodyPart();
DataSource source1=new FileDataSource(filename1);
messageBodyPart.setDataHandler(new DataHandler(source1));
messageBodyPart.setFileName(filename1);
multipart.addBodyPart(messageBodyPart1);
mess.setContent(multipart);
Address[] allRecips = mess.getAllRecipients();
if(toStdOut)
System.out.println("done.");
//System.out.println("Sending message (\"" + mess.getSubject().substring(0,10) + "...\") to :");
System.out.println("Sending message................");
for(int i = 0; i < allRecips.length; i++)
System.out.print(allRecips[i] + ";");
System.out.println("...");
Transport.send(mess);
if(toStdOut)
System.out.println("done.");
return 0;
What's wrng with that code snipnet?
Nagaraju G.This works fine with me, try it or compare it if you want.
public void sendEmail( String from, String to,
String subject, String body) {
fMailServerConfig.put("mail.smtp.host", " <<mail server>>");
Session session = Session.getDefaultInstance( fMailServerConfig, null );
MimeMessage message = new MimeMessage( session );
try {
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO,
new InternetAddress(to));
message.setSubject( subject);
message.setText( body);
//Adds Attechment:
Multipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Here are my attachments");
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
//first attachment
DataSource source = new FileDataSource("C:\\img1.jpg");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("C:\\Telnor1.jpg");
multipart.addBodyPart(messageBodyPart);
//Second attachment
DataSource source2 = new FileDataSource("C:\\img2.jpg");
messageBodyPart.setDataHandler(new DataHandler(source2));
messageBodyPart.setFileName("C:\\Telnor2.jpg");
multipart.addBodyPart(messageBodyPart);
//etc...
message.setContent(multipart);
Transport.send( message );
}catch (MessagingException e){
System.err.println("Cant send mail. " + e);
The error on your code might be:
BodyPart messageBodyPart1=new MimeBodyPart();
DataSource source1=new FileDataSource(filename1);
messageBodyPart.setDataHandler(new DataHandler(source1));
messageBodyPart.setFileName(filename1);
multipart.addBodyPart(messageBodyPart1);
You don't need to create a new BodyPart, and apart from that you'r seting values on "messageBodyPart" but adding "messageBodyPart1" to your multipart :P
Well see u and have a good one!
p.s. i know it's a little late from the day you posted, but at least it might help somebody else :D . -
How to handle Multiple attachments in sender Mail Adapter
Hi,
In our requirement is mutiple documents send through mail adapter, In custom java module we read the each document details and do it bussiness process. But now i am not able to read the multiple files at a time. we are able to read single file only. So plz give the solution for that.
1) How to send multiple attachments(like word, PDF, JPG etc..) using mail apapter.
2) How to read multiple attachments in custom java module.
Thanks & Regards
VijayHi Vijay,
Go through this weblog this explains steps to multile attachments.
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
Regards,
Ashwin. -
*Help Needed* Adding multiple emails/mailing list in the email subscription
Help Needed
Hi,
Can someone help me in adding multiple email address/mailing list in the email subscription for interactive reports in Apex 4.
pls mail me at [email protected]
Regards,
SunnyThe doc does not mention a separator for the email addresses because we only support one email address per subscription. I have logged a task for our next release to look at expanding it and allowing multiple.
-- Sharon -
Adding multiple same-name nodes from one xml into another
Hi,
Following on from my question the other day (Adding multiple different nodes from one xmltype into another), I now have a slightly more complex requirement that I cannot work out where to start, assuming that it's something that can reuse some/all of yesterday's work (thanks again, odie_63!). ETA: I'm on 11.2.0.3
So, here's the (slightly amended) xml along with yesterday's solution:
with sample_data as (select xmltype('<root>
<xmlnode>
<subnode1>val1</subnode1>
<subnode2>val2</subnode2>
</xmlnode>
<xmlnode>
<subnode1>val3</subnode1>
<subnode2>val4</subnode2>
</xmlnode>
</root>') xml_to_update,
xmltype('<a>
<b>valb</b>
<c>valc</c>
<d>
<d1>vald1</d1>
<d2>vald2</d2>
</d>
<e>vale</e>
<f>valf</f>
<g>
<g1>valg1</g1>
<g2>valg2</g2>
</g>
<h>
<h1>valh1</h1>
<h2>valh2</h2>
</h>
<multinode>
<name>fred</name>
<type>book</type>
<head>1</head>
</multinode>
<multinode>
<name>bob</name>
<type>car</type>
<head>0</head>
</multinode>
</a>') xml_to_extract_from
from dual)
select xmlserialize(document
xmlquery(
'copy $d := $old
modify (
insert node element extrainfo {
$new/a/b
, $new/a/d
, $new/a/f
, $new/a/h
} as first into $d/root
return $d'
passing sd.xml_to_update as "old"
, sd.xml_to_extract_from as "new"
returning content
indent
from sample_data sd;
That gives me:
<root>
<extrainfo>
<b>valb</b>
<d>
<d1>vald1</d1>
<d2>vald2</d2>
</d>
<f>valf</f>
<h>
<h1>valh1</h1>
<h2>valh2</h2>
</h>
</extrainfo>
<xmlnode>
<subnode1>val1</subnode1>
<subnode2>val2</subnode2>
</xmlnode>
<xmlnode>
<subnode1>val3</subnode1>
<subnode2>val4</subnode2>
</xmlnode>
</root>
However, I now need to add in a set of new nodes based on information from the <multinode> nodes, something like:
<root>
<extrainfo>
<b>valb</b>
<d>
<d1>vald1</d1>
<d2>vald2</d2>
</d>
<f>valf</f>
<h>
<h1>valh1</h1>
<h2>valh2</h2>
</h>
<newnode>
<name>fred</name>
<type>book</type>
</newnode>
<newnode>
<name>bob</name>
<type>car</type>
</newnode>
</extrainfo>
<xmlnode>
<subnode1>val1</subnode1>
<subnode2>val2</subnode2>
<type>book</type>
</xmlnode>
<xmlnode>
<subnode1>val3</subnode1>
<subnode2>val4</subnode2>
<type>car</type>
</xmlnode>
</root>
If it's easier, I *think* we would be ok with something like:
<newnode>
<type name="fred">book</type>
<type name="bob">car</type>
</newnode>
The closest I've come is:
with sample_data as (select xmltype('<root>
<xmlnode>
<subnode1>val1</subnode1>
<subnode2>val2</subnode2>
</xmlnode>
<xmlnode>
<subnode1>val3</subnode1>
<subnode2>val4</subnode2>
</xmlnode>
</root>') xml_to_update,
xmltype('<a>
<b>valb</b>
<c>valc</c>
<d>
<d1>vald1</d1>
<d2>vald2</d2>
</d>
<e>vale</e>
<f>valf</f>
<g>
<g1>valg1</g1>
<g2>valg2</g2>
</g>
<h>
<h1>valh1</h1>
<h2>valh2</h2>
</h>
<multinode>
<name>fred</name>
<type>book</type>
<head>1</head>
</multinode>
<multinode>
<name>bob</name>
<type>car</type>
<head>0</head>
</multinode>
</a>') xml_to_extract_from
from dual)
select xmlserialize(document
xmlquery(
'copy $d := $old
modify (
insert node element extrainfo {
$new/a/b
, $new/a/d
, $new/a/f
, $new/a/h
, element newnode {
$new/a/multinode/name
,$new/a/multinode/type
} as first into $d/root
return $d'
passing sd.xml_to_update as "old"
, sd.xml_to_extract_from as "new"
returning content
indent
) fred
from sample_data sd;
Which produces:
<newnode>
<name>fred</name>
<name>bob</name>
<type>book</type>
<type>car</type>
</newnode>
- obviously not right!
Can anyone provide any hints? I've tried searching for similar examples, but I mustn't be putting in the right search terms or something!odie_63 wrote:
or, similarly, to get the alternate output :
copy $d := $old
modify (
insert node element extrainfo {
$new/a/b
, $new/a/d
, $new/a/f
, $new/a/h
, element newnode {
for $i in $new/a/multinode
return element type {
attribute name {data($i/name)}
, data($i/type)
} as first into $d/root
return $d
So we're going with the second method, but I've discovered that the "$i/name" node is not always present. When that happens, I would like to use a default value (for example, "george"). I promise I've searched and searched, but I'm completely failing to turn up anything that sounds remotely like what I'm after (seriously, I can't believe my google-fu sucks this badly!).
Is there a simple way of doing it? The only thing that I've found that looks vaguely relevant is "declare default namespace...." but I'm not sure that that's the correct thing to use, or if it is, how I'm supposed to reference it when populating the attribute value. -
Adding multiple e-mail alias addresses to an account
Can someone please tell me how to add another e-mail address to my Mail account. I have tried using info from the Mail Help file, both "adding another account" and "adding multiple e-mail alias addresses to an account". Each time when I try to send a test message to or from the added e-mail address, I get the same message: "Cannot send message using the server mail.bellsouth.net. Use the Pop-up menu below to try a different outgoing mail server". The only pop-up is smtp .Mac.
I have tried both methods shown in the HELP file and get the same message. I would really appreciate your help.Are you trying to add a second email account to Mail, or just add a second "(apparently) from" address to an existing account?
If the former, we need to know some more detail, like:
(1) who is the existing account, .mac or bellsouth?
(2) Which are you trying to add, .mac or bellsouth?
(3) I assume your ISP is Bell South?
(4) What are the names of the smtp servers and what are their respective smtp server port numbers?
(5) Are either of them using SSL on the smtp server?
(6) I don't remember whether Tiger Mail has it or not, but in Leopard Mail, on the menu bar under "Window" there is a selection "Connection Doctor." If applicable to Tiger Mail, what does it say about your connections?
(7) Which account can you send mail through and which one can't you send mail through?
(8) Are your receiving mail okay through either or both accounts? Which one(s)?
Now if you are trying to add a second "(apparently) from" address to an existing account, in Mail Prefs > Accounts > mail account > Email Address, just add a second email address separated by a comma like so:
[email protected], [email protected]
You could have an issue with bellsouth or .mac requiring the domain name in the apparently from email address to match the domain name of the smtp mail server. -
How can we send multiple attachments in a mail from iPad 2
Hi,
I am using a ipad2. I want to know how we can send multiple attachments through mail from iPad. I did not find any option of doing this. Is there a way to do this.
Regards,
SatyabratYou can't do it natively on the iPad (unless you just want to send up to 5 photos from the Photos app). I use the GoodReader app which supports quite a few document/file types (e.g. PDF, Excel, Word, pictures), and from that I can select multiple files (including different types) and attach them to the same email.
-
How to accept multiple attachments on selection screen?
Hi All,
I need to know how to accept multiple attachments on selection screen and send them as email to external system (outlook).
Basically, my req is to send a common email with attachments to certain users. These users are displayed in ALV. User will select ALL or specific user from ALV and send an email with message entered on selection screen.
I used text editor control to input message body. I need to know how to accept attachments and send them.
Appreciate any inputs.
Thanks,
SKJSAP uses a nifty little button called 'Object Services' on ME23N (top left) which you can use to attach documents to business objects.
http://help.sap.com/saphelp_nw70/helpdata/EN/be/3fe63659241157e10000009b38f889/frameset.htm
It's a complicated way of doing it but might give you extra functionality in the long run. -
I am new to IPAD use and need to forward one attachment from an original email that contains multiple attachments - how can I isolate and forward only one of the attachments?
Aha! I have been doing just that. However, what has been tripping me up is that I am also used to clicking the Go Online/Go Offline toggle button on the top menu bar when I manually check for messages on Cox. Apparently when you take one inbox offline, that button switches to Off even though the other inbox is still online. If I just ignore that button and go on or off via the cox mailbox listing, it keeps comcast from being reactivated.
Thanks so much for helping me think this through.
Edited to add: I removed that dang button from my menu so I can stop clicking it. -
How to save multiple attachments in Lion Mail?
In Snow Leopard Mail, I can save multiple attachments to my Downloads folder with one click. In Lion Mail, I see no way to save attachments except by right-clicking on them one at a time. I must be missing something. Information appreciated.
I believe you are missing something. I'm not on my Mac right now but there should be a setting where to save attachments and also muiltiples at one time.
-
Need help in displaying multiple attachments in a OAF Page
Hi,
I need to display attachemts of requisition line in a OAF Page(Notification Detials Page)and the attachments can be more than one.My custom VO returns it as a single string like url1, url2.. etc.
I need to show them as seperate links.
I tried using the Item Style as LINK.But it is not working.It is prefixing the server url before the View Attribute and creating a single link.
Any help in this regard will be appreciated.Thanks in advance.
SriniHi skeerthi,
If you are using the core attachments table (FND_ATTACHED_DOCUMENTS and the like), you can have a look on the Developer's Guide on chapter 4: Implementing Specific UI Features, section "Attachments", there is a seeded region available for displaying multiple attachments.
If you are not, then i'd recommend refactoring :D... Just kidding, it would be nice to use the core feature, but if the table is custom, and the links are stored separated by commas, you will have to write controller code to implement that. That can be done by:
1) Creating an Application module method that uses StringTokenizer to tokenize the attribute String (use getViewObject().getCurrentRow().getAttribute() to get the comma-separated value) and return that to the controller
2) In the controller, receive the StringTokenizer and for each token, use the api createWebBean() to create an OALinkBean and add it to a layout region using addIndexedChild() api.
This way you will dinamically create a Link for each attachment. If your layout region is, for example, tableLayout, you can create a rowLayout for each token, then create a Link, add the link to the row layout and finally add it to the tableLayout. By doing so, you will create a table-style attachment region.
Hope it Helps
Thiago
Maybe you are looking for
-
[SOLVED] Zynaddsubfx and qwerty keyboard
Hello guys and girls! I have a little trouble with zynaddsubfx For a long time I was having fun with Zynaddsubfx and his awesome synths. I don't have any real musical (midi or usb, no matter) keyboard and i played sounds with general qwerty keyboa
-
on light goes on 4 a second
-
Access data sources supporting Tuxedo
WLS 5.1 states that it does not support two-phase commit. In fact, if I try to establish two connections to different Oracle databases within the same entity bean or session bean within a transactional context then an exception is thrown. I need to p
-
How to see the complete code behind the tile?
Hi All, I am working on MSA 4.0. I am able to see the code by double clicking on the methods in the tile but unable to view the complete code behind the tile. I want to see the complete code behind the tile. Can anyone help me with this? Best regards
-
i want to copy my data to my iPhone via itools the error occured is unable to ascertain the compatibility of itunes my itools and itunes both are updated. please help