Adding N2K to existing infrastructure

Hi,
I have to add a pair of N2Ks to Existing N5Ks. There is already a pair of N2Ks attached to N5Ks.
What are the steps required to perform this task ? Also, can I combine FETs with SFPs for N2K connection on a single switch.
Do I need any downtime for the already connected N2K and N5K or any service disruption during this activity?
Thanks

Hi,
What are the steps required to perform this task ? Rack the 2ks and run the cables to 5ks and plug in the SFP+s or FETs on both sides. If the link comes up create your VPC config and than do a "sh fex" if all configured correctly you should see the new FEXs online.
can I combine FETs with SFPs for N2K connection on a single switch.
No, use FETs or 10Gig SFP+. Every 2k comes 4 FETs in the box so that should be enough to connect the FEX to both 5ks using 10Gigs.
Do I need any downtime for the already connected N2K and N5K or any service disruption during this activity?
No, no need for any downtime. Your old FEXs should be untouched.
HTH

Similar Messages

Is it possible to set up a form with a submit button where the data in the fields gets added to an existing excel file, just like 'collect response' but without connecting to the internet?

I have a form that I want to use to collect peoples information with a submit button. I am trying to get the data that gets inserted to be added to an existing excel doc when the submit button gets hit, the form then resets and someone else can fill in the same form, hit submit and his data gets added to the existing data in the same excel doc. It is basically the same as the 'collecting response' option but without having to be online. The form is going to be used at a boat-show and I am going to get people to fill it out on an iPad. Does anybody know if this is possible?

You could connect a bunch of 3700s to each computer and do this .
Or...since you're the one who monitors the monthly limit, you could restrict an individual's internet access once you see that you guys are coming too close to the cap.
I don't work for Cisco. I'm just here to help.

Substitution not carried out when WBS is added to an existing project......

Hi, I have created a substitution rule to substitute the investment profile in my projects with a blank for any WBS which is not level one. I am not sure why this rule does not take effect immediately a new WBS is included. When I try to carry out the substitution manually, I get the error message 'Error when processing asset under construction (AuC) for WBS element'. Any ideas how I can get this substituion to work when a new WBS is added to an existing project?

You should use the substitution otherway....
I believe your project is in REL status and also you have defaulted IM profile in the project, so whenever you create a WBSE, the IM profile is inherited to the WBSE and since it is in REL status, the system will create an AUC based on your IM profile and now you are using substituition to remove the IM profile so this will cause the problem...Instead of this....try this...do not default IM profile in project, and instead of removing IM profile for all WBSE which is not level 1, use substitution to write IM profile in WBSE which is only level 1.

Will a NME-AIR-WLC25-K9 bolt onto existing infrastructure?

Interested in facilitiating the ability for the receptionist (or anyone for that matter) to be able to create a day pass for guest wireless access. The idea being that the guest would receive a pass that allows them access to a site's <20 access points for a predetermined amount of time, in this case the business day providing a path to an dedicated guest Internet circuit.
1) Is this NM able to be added to the existing operating environment without completely taking over? in other words can it be added to perform it's function for guest wireless but ignore the current configuration (with limits obviously) and not have issues with changes being made to the APs via other mechanisms?
2) can these NMs be added to an enterprise autonomously at individual sites, in other words in an enterprise filled with APs can there be a few of these that are only responsible for their respective sites/subnets without any conflict?
The VLAN path would be (for example) 1242->3560->4506->3845->I, so I'm guessing that all Cisco means there wouldn't be an issue there, but I'm mentioning it just in case of device limitations
All input feedback welcome; thanks in advance.

Yes, I'm running 7.0.116.0 on the WLC25 today, so that sounds promising.
I've already downloaded the config file from the WLC25, and I did notice it looked pretty basic command-line, so I was certainly hoping that to be the case.
If the 5508 firmware is newer (I haven't even unboxed it yet), do you expect I'd run into trouble importing the old config, or should I version match first, import, then upgrade to latest?
Any other gotchas I should look out for in doing this?

Adding New Cisco ESW520 to Existing Infrastructure with a New Class A

Hello all,I was just recently brought into a organization that has a dying infrastructure to clean it up. The core is aCisco 6506 Erunning 12.2(18). I have multiple 3032 and 2960's hanging off of them all on the 10.3.x.x. Before I was hired there was a decision made to purchase new switches and move over to the 10.33.x.x. They began building servers and placing them all on the 10.33.x.x. while maintaining the 10.3.x.x environment. The servers are functioning correctly in production. I am looking to add 6 new ESW 520 switches to the environment (purchased last year and never deployed) for a new VOIP system (purchased last year as well). While the person before me was going to run a completely separate physical network and connect to the ESW 520 I dumped that idea and will be using the new ESW 520 for all closet switches (replace 2960s...
This topic first appeared in the Spiceworks Community

Hello,
I think that it will not change soon in Oracle OLAP. When you create a cube you mark some dimensions as sparse and then a special structure (composite) is created, so I guess it is then hard to change this structure as well as change cube variables dimensioning (one variable for each measure). I think that also a lot of metadata is created because in 10G relational views are not explicitly created. But Oracle OLAP is really improving recently in terms of performance, scalability and ease of use so I would not complain much about this deficiency. Also while using OLAP you will get used to dropping and recreating objects, fortunately in 10G AWXML scripts come handy. If you do not recreate your cubes while refreshing them then the size can really grow significantly. So I suggest to create scripts for both dimensions and cube. Then when you add new dimension you can use scripts for other dimensions and only recreate the cube and new dimension of course.
B.R.

Bug: Adding number to existing contact from a sms msg

A friend sent me an updated number in a txt message and I attempted to replace his existing number with the one in the txt message. I tapped the little blue arrow next to the txt message on my iPhone 4 and got a screen in which the phone number was listed with the following options: 'Call', 'Text Message', 'Create New Contact', 'Add to Existing Contact', and 'Share Contact'. When I tapped on 'Add to Existing', I was presented with a New Contact window. I tried this several times to make sure I hadn't tapped the wrong button. Clicking on 'Create New Contact' caused FaceTime to start up. The other buttons worked properly. Lastly, I tried going back to the sms message and tapping the blue arrow again. This time, the list had a 'FaceTime' button below the 'Text Message' button. The 'FaceTime' button was not there previously. This time, I was able to add to an existing contact and selected my friend. The number was automatically added as an iPhone tagged number, though I'm not sure if my friend has an iPhone 4 or not. He was previously using a Blackberry.

I have exactly the same problem. Rebooted iPhone but exactly the same:
Add to new contact starts facetime call. Add to existing contact starts add to new contact dialog.
This is a bug.

Creating a new Column for my list Versus adding it from existing site columns, when to use each approach

I have created a new issue tracking list inside SharePoint 2013 team site. And it comes with predefined columns, some of them are useful while the other are not . Can anyone help me in figuring out the following:-
The list come with a field named “Assigned To”, while in my case I want a column named “Approver”. So what is preferred , to re-name the “Assumed to ”column to “Approver”, or create new field name “Approver”.?.
If I rename an existing column, could this be overridden in any future updates for my SharePoint server?
Now we want to add a column named “Office location”.so I need to create a new field for this. But seems there are two ways to do so either to add a new Site Column at the site level and then assign it to the list as follow :-
, or to directly adding a column to the list, even if it is not available in the site columns , as follow:-
So what are the differences between the two approaches ? .if I am not wrong defining a site column will allow me to re-use it in another list , but defining the column at the list level, will allow me to add a column even if it is already defined as site
column.
So can anyone advice on my three questions please? Thanks

1) 'Assigned to' has a different meaning then 'Approver' , it will be better if you create a new field for 'Approver'. Assigned to is a Site Column which has managed property for search, so it will be confusing type of data it will return from search in
future.
2) Any rename of fields should not / and will not get modified in SharePoint updates. So, you can rename is without any issue since the internal name will remain the same. But its always better to create your own custom column for business use.
3) Creating a site column or not depends upon your need, If you create a Site Column - in whole site collection you will be able to add this field in any list - It will be crawled, SharePoint will automatically provide managed property for site column and
you will be able to get this value via search. These things will not be present in list column, you will need to do specific settings in case its required.
If these things are needed then you can go for Site Column, usually its good to create a Site Column and use it.
For Site Columns you can check following links
Introduction to Columns
From site column to managed property - What's up with that?
Create a site column
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.
thanks a lot for your reply it is really helpful. so as i understand that using site columns will be better in most cases, and there is not any specific reason for not using it? is this right ?
Second question, do u mean that if i have a list column named "Serial number", then this column will not be searched ? For example if i have serial number such as "12345" and i try searching this text "12345" i will not get
the item in my search ?
Thanks

*Added* code to existing source file, compiled it, and class file shrunk

Another newbie here. Fortunately, my classpath is ok, so I'm able to compile a .java file.
I added one line of code (System.out.println) to write the value of a variable to a log. After compiling with javac, I noticed that the resulting [new] class file was smaller than the existing class file. I looked at each of the class files with Textpad. It's gibberish, but I quickly saw that a large block of code was missing in the new class file, even though the size of the source file had been increased.
There is a difference, however, between how the two class files were created. The existing class file was compiled (along with many others) by exporting an .EAR file from a development environment (WSAD) to the WebSphere Administrator Console. Conversely, I am now compiling the same source file with javac on my machine.
I suspect that this is the reason why I can add code to a .java file, compile it, and have the resulting class file actually lose code. Even if I am correct, I don't know what to do about it.
Does anyone have an idea?
Regards,
Daniel T.

Thank you both for your replies. I've read many posts over the past few months, and I know how important it is to provide as much info as possible, when asking a question here. That said, I have another tasty tidbit...
After replacing the existing (larger) class file with the new (smaller) class file, my application now produces this:
"*Error 500: LinkageError while defining class*..." [name of class]
*"...(Unsupported major.minor version 50.0) This is often caused by having a class defined at multiple locations within the classloader hierarchy. Other potential causes include compiling against an older or newer version of the class that has an incompatible method signature. Dumping the current context classloader hierarchy: ==> indicates defining classloader ==>[0] com.ibm.ws.classloader.CompoundClassLoader@6bd156d5 Local ClassPath:"*
...[the entire classpath]...
Original exception--- java.lang.UnsupportedClassVersionError:
I'm guessing that my focus should mostly be on the 'Original exception', and maybe I need to revisit the JRE or JDK or JVM (these terms are somewhat nebulous to me, so please forgive me using them interchangeably) on my machine. For now, I'll just keep trying stuff. Thanks again for the replies!
Regards,
Daniel T.

Does adding captions to existing JPEGs degrade image?

Using Photshop Elements 5.0, when I open an existing JPEG file and add a caption, the file's date stamp is changed to the current date, even if I don't actually edit the image.
I know that opening, editing and then resaving an existing JPEG file causes the image quality to degrade each time this process is repeated, since the JPEG format format uses lossy compression. I'm wondering if adding a caption does the same thing, i.e., causes the image quality to degrade.
Is adding a caption equivalent to editing the file, even if the actual graphic image isn't altered at the same time? Does adding captions to JPEG files after the fact cause image quality loss?

No, adding a caption -- or a date/time, keyword tag, star rating, notes, or GPS location -- updates the file's metadata section without changing the actual photo. (That metadata is sometimes loosely referred to as EXIF, XMP, or IPTC.) So you don't need to worry about loss of image quality due to recompression.

Adding disk to existing disk group in ASM on the windows 2003 server.

Guys,
Can someone please share some opinions of adding an extra disk to an existing disk group ( DG_FRA ) in ASM on a windows 2003 server ( like any issues when bringing db backup ). This is a production database and I want to be careful , so that I don't have any issues with the database. Existing DG_FRA is 550GB ( size of the image copy is 325GB ),recently we have been running heavy loads and this is filling up the archive logs and forcing us to take incremental backups couple of times before deleting the archive logs. As a result of this we decided to add an extra 200GB so that we don't have to do this backups frequently during the day. Storage is on EMC SAN and the database is in 11G.
Thanks for all your help.

There will not be any issues..
stamp the disk and then add the disk.
You can also follow this approach -
stamp the disk.
create a new group and then add a datafile in this new group for the existing tablespace.

POWL Adding TAB to Existing POWL Travel Assistant

Hello - (First time to post because my head is exploding),
   I want to add a tab to the travel assistant POWL so that they can see credit card receipts. (Wonder why this wasn't done initially because our TA's have to go in and actually create a report to see if their employees have receipts yet....ridiculous!)
   Anyway - the reason why my head is exploding:
   I'm using the existing application ID of FITV-POWL-TRIPS-ASSISTANT. I've created a new "Z" powl query to add via all the config and now I'm using the reports to check it.
POWL_D02 - I created a type named ZFITV_POWL_TRIPS_CCC_ASSISTANT with a feeder of CL_FITV_POWL_FEEDER_TRIP_CCC.
It says my query ZFITV_POWL_TRIPS_CCC_ASSISTANT is not active (type FITV_POWL_TRIPS_CCC w/CL_FITV_POWL_FEEDER_TRIP_CCC)
QUESTION: How do I activate it??? (I'm debugging this now - will write a good wiki once figured out or with help from friends!)
POWL_D03 - Tells me the below.
QUESTION: Tells me that the "Q" type isn't assigned to the application. Ok - I've been through all the steps several times. What is the trick here. My TEST shows the changed tab order as I made the CC 1st; Exp tab 2nd; Req tab 3rd; Travel Plan tab 4th; These are ordered differently now w/exception of my new CC tab not showing up.
Thanks for any help! (We're on 7.02 with EHP4 using all abap)
=====================================================================
Check Application ID
Application ID                   Q/T Query/ Type                       Check Results
FITV-POWL-TRIPS-ASSISTANT                                               OK
FITV-POWL-TRIPS-ASSISTANT        Q    FITV_POWL_TRIPS_EXP_ASSISTANT     OK
FITV-POWL-TRIPS-ASSISTANT        Q    FITV_POWL_TRIPS_TP_ASSISTANT      OK
FITV-POWL-TRIPS-ASSISTANT        Q    FITV_POWL_TRIPS_TR_ASSISTANT      OK
FITV-POWL-TRIPS-ASSISTANT        Q    ZFITV_POWL_TRIPS_CCC_ASSISTANT    Type not assigned to this ApplI
FITV-POWL-TRIPS-ASSISTANT        T    FITV_POWL_TRIPS_EXP_ASSISTANT     OK
FITV-POWL-TRIPS-ASSISTANT        T    FITV_POWL_TRIPS_TP_ASSISTANT      OK
FITV-POWL-TRIPS-ASSISTANT        T    FITV_POWL_TRIPS_TR_ASSISTANT      OK
FITV-POWL-TRIPS-ASSISTANT        T    ZFITV_POWL_TRIPS_CCC_ASSISTANT    OK

Ok - I've figured out via debug (yeah) that an entry had to be added to the table POWL_TYPE_ROL with applid=FITV-POWL-TRIPS-ASSISTANT and type=FITV_POWL_TRIPS_CCC even though my type is ZFITV_POWL_TRIPS_CCC_ASSISTANT.
Again - a wiki is coming soon.
Debug is always the answer it seems.
Just need to adjust the data in a class that I'll have to enhance in order to bring back CC receipts of the person being selected....

Adding QM to Existing UCCX Premium w CR

Trying to understand the licensing behind adding QM to an existing deployment of CR.
UCCX v 9.x
Ordering guide is not very clear on part #, if any

Hello-
Do I understand that you currently have a deployment of WFO with Compliance Recording licenses and you want to add Quality Management licenses as well, correct?
You should be able to mix the license types and then just assign the desired license to an end user.
9.x QM seat: L-CCX-90-A-QM-LIC
I hope that helps.
DJ

Adding column to existed index syntax or example

Hi,
can any one please tell me the syntax or example for adding one more column to existed index.
Thanks in Advance
Krishna

Hello Mr Murali,
I do not believe you can alter index by adding more columns to it with ALTER command.
But you can always CREATE a new index with the columns that you need (ONLINE, if necessary) and then DROP existing index.

Problem in later adding forms in existing project...

Later i've added three more forms in existing project.
but pages are not created for those three forms...
how to resolve this?
Edited by: skud on Mar 7, 2011 4:11 AM

Hi peter,
Thanks for your reply..
Actually I migrate three forms and create a application called transport,the pages are created for that respective three forms.
Ya ofcourse i've created one page(Navigation list) manually in the application transport.
i have to add three more forms in the same application transport, so i migrate three more forms by clicking upload file>
three more forms are added in the list. After added i have only two option in that page upload file> and create application.
i tried to create application but new pages are not creating for new three forms in the same application transport.
did you understood my problem?
thanks...

Adding contents to Existing web applicaitons

Hi All,
Following link talks of adding contents from oracle content server to exsting webapplications. Does any one has an idea or some sample examples on this.
http://www.oracle.com/us/products/middleware/content-management/revolutionary-one-click-mgmt-ds-077616.pdf
I tried adding Site studio tag libraries to a webapplication, that shows site studio services in the component panel. Such as Placeholder, DataFile, IdcService, which I can drag and drop on the jsp page. When I run the application, it gives me follwoing error
"oracle.stellent.wcm.server.request.RequestException: No sites are configured"
Could you please provide some pointers.
Regards,
Sanjay

Hi
When you have to run the sites / contents from UCM on an external application then you will have to create a Site using SS Designer - Create the Sections / Pges /Layouts . These Pages / Layouts are where your Placeholders would be placed which can be then ported to an existing external application / site and used to retrieve contents from UCM .
If you are using UCM 11g then you can use Jdev to port your existing application on Jdev and add the Site Studio elements / assets to these apps directly . In SS / UCM 11g there is this added capability to have a completely external site (w.r.t UCM) and run your applications .
Hope this helps .
Thanks
Srinath

Adding N2K to existing infrastructure

Similar Messages

Maybe you are looking for