Adding new custom fields in t code - MIR7

Dear Experts ,
I have the following requirement .
In MIR7 t code under the tab - basic data - i have to add new custom fields like
Billing document no and billing doc item along with multiple selection option .
i have found the  BADI - BADI_FDCB_SUBBAS04  . i dont know how to get the custom fields in that .
Regards
Prabhu

I have designed a MODAL SCREEN which contains a table control for multiple entries for  Billing document nos .
I want to design a PUSHBUTTON on the MIR7 screen and then once i will press the pushbutton the MODAL screen should get called from that .
When the MODAL screen will be called in the back end the MIR7 screen should also be present in the
back end .
If any queries on understanding the requirement then please revert .
If any body has any idea on this then please suggest .
Regards
Prabhu

Similar Messages

  • Adding new custom fields in SAP transaction - PSOBWORK?

    Hi,
    System - ECC 6.0
    I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
    I highly appreciate your help on this.
    Thanks.
    Rajesh

    Hi ,
            There are options like screen-exits ,badis
    the best option would be to find screen exits for the transaction and you code ur logic in the exit and create the screen with your requirement .

  • Adding new custom fields in SAP transaction?

    Hi,
    System - ECC 6.0
    I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
    I highly appreciate your help on this.
    Thanks.
    Rajesh

    Hi,
    Find the link below  which has step by step process of adding custom fields:
    goto site saptechnical-tutorials-ExitsBADIs-EEWB
    Hope this would be helpfull.
    Regards,
    Sharath

  • Adding new custom fields in FB01

    Hello all.
    I am having a requirment as i need to add the custome fields in Fb01 transaction at item level.
    I have added the custome fields in Bseg table, now i wan to display this fields in the Fb01 screen.
    Is thios possible to do so.

    First, I hope you are using the ECC 6.0 since this is a new functionality (or ECC 5.0????). Second, tell us the steps you have followed.
    Fernando.

  • Adding new custom field in already existing custom tab for MM01

    Hello Guru,
    I have a requirement that add a custom field in already existing custom view of MM01. I did the following steps :
    1. I have cerated a new field in MARA using APPEND structure.
    2. I have found the function group(Y_FE_MARA) that already there other subscreens, so that I have added another subscreen in that function group and created a field from MARA in the screen.
    3. in SPRO went for the path Logistics General->Material Master->Configuring the Material->Define Structure of Data screens for Each Screen sequence
    In the 3rd step, I have choosen already existing screen sequence(Y1) and went for Data Screens and choosen for Custom tab and double click on subscreens and then I have added the program as SAPLY_FE_MARA and subscreen number(011) and saved it.
    After all the above steps, I have run MM02/MM03 then the field is not getting displayed in the screen of custom view.
    Did I miss any steps here? Please suggest me if I did something wrong.
    Thanks and Regards,
    Muralikrishna Peravali

    Hi Raymond,
    Thank you for the reply. As per the note some one already implemented the Screen Enhancement with 2 custom views. I need to add the field in any one of existing custom view. So for this I have created a Subscreen in copied function group of MGD1(Y_FE_MARA). But in the function group already 10 Subscreens were created. Is this is the problem? or else copy the FG MGD1 into another FG and create the subscreen will be feasible to my scenario?
    Please suggest me.
    Thanks and Regards,
    Muralikrishna Peravali

  • FI-AR-CR: Adding new custom field to FD32

    Hi,
    We need to add a custom field to FD31/FD32/FD33 transaction that is going to be feed by another develpment that we have.
    I searched in customizing but no luck. I found some info that i need to do one (or both) steps:
    1) Add a screen field to the  standard SAP program (namely SAPMF02C and screen 0210);
    2) Enhance an user exit, for instance FI_DUZI_ROUND_CML (Rounding in Accordance with Contract Conditions)
    Do you guys have any other idea ?
    The first option needs that the standard veiw to be changed so we are trying to found different options...
    Best Regards,
    Bruno Sousa

    Hi Christian,
    So your client made an enhancement to KNKK table.
    Does the field appeared automatically in FD32 transaction (for instance) or did you needed to do any other enhancement, like changing the view for instance ?
    I have an specific KPI to put in the view status and so, since i don't have any other standard field that i can use, i need to add a specific one....
    Thanks in advance.
    Best Regards,
    Bruno Sousa

  • Adding New Custom field in KE30 Report

    Hi Friends,
    I have the requirement to Add new custon field in the KE30 report .
    Is this Possible ?
    Can anyone Tel me how to go about it .?
    Thanks in advance.

    Hi ,
    Please check the below link for KE30 -- COPA reallignment.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50482a0c-4033-2c10-3fb5-9f8c25360adf

  • Issue with new Custom field value in Material UI (EHP5)

    Hi
    We added new Custom field (country) in material UI for Routing the WF based on country.
    we added this new field in material general data, When user press the "check" button in the header the value disappeared in the UI.
    This field value  required only in MDG CR level, this field value will not be updated in ECC active area.
    Request your inputs to solve this problem.

    resolved myself:
    PROCESS BEFORE OUTPUT.
    *                      Verarbeitung vor der Ausgabe
    *MS17092009 Non eliminare modules standard.
      MODULE set_propriety.
      MODULE INIT_SUB.
      MODULE GET_DATEN_SUB.
    PROCESS AFTER INPUT.
    *                      Verarbeitung nach der Eingabe
    MODULE GET_DATEN_SUB.
    CHAIN.
          FIELD MARA-ZBARCODE.
    ENDCHAIN.
    MODULE SET_DATEN_SUB.
    FIELD MARA-ZBARCODE MODULE BARCODE_0001 ON INPUT.

  • Project Settlement - Aggregating/Settling on new custom field

    At our company, we created a new custom field called "Location Code" that is populated during journal entries through manual input. When an entry to a WBS element is posted with a Location Code value entered, the Location Code value also gets carried over to CO (controlling), SPL, and is in PS. The problem we have is with settlement as it does not carry over the Location Code at the final settlement receiver. For example:
    1. Journal entry is posted to WBS element H01.12345.01.01 with Location Code value entered of "435" (this is a field in the FI document posting screen) for $100. Another entry is posted to the same WBS element but with a different Location Code of "080" for $200. Both entries to the same G/L account.
    2. Settlement is run to settle the 2 entries in Step 1 above which totals ($200 + $100) $300. WBS element H01.12345.01.01 will settle to a cost center.
    3. When we view the final accounting documents (especially our special ledger purpose documents), Location Code value is blank and there is one entry to the receiving cost center for $300. It seems project settlement aggregates entries based only on WBS level and G/L account.
    QUESTION: Is it possible (and if so, how) to get projects to settle these lines individually based on aggregating on Location Code as well as G/L account? We would like to see $200 settle to the receiving cost center with Location Code value "435", and another line settling $100 to the receiving cost center with Location Code "080".
    I hope I made sense. Thanks in advance!

    line item settlement should only be possible if the setting is maintained in the IM Profile and it sounds like your projects don't have an IM profile...  so it shouldn't work.  I haven't used it on a non-capital project but you could give it a shot.
    [-nathan|http://wiki.sdn.sap.com/wiki/display/profile/Nathan+Genez]

  • SRM 7.0 New custom fields added to view do not appear in the component conf

    Hi
    I added two custom fields to the view V_QTE_DOFC_I_DESC of the WD componenet /SAPSRM/WDC_DODC_QTE_I_DS. This view gets called when bidder is trying to create a bid and clicks on add Substitute Item in the Item tab. This view is simply a popup window where we can enter ther substitute item.
    I added two custom fields to the context of the above view and placed on the layout of the view as input fields. Then I tried to modify the component configuration /SAPSRM/WDCC_DODC_QTE_I_DS_SUB. When I look in t he web dynrpo built-in for the view V_QTE_DOFC_I_DESC, I don't see the custom fields that I just added. As a result, these custom fields are not displayed when I try to substitute an item. Could anyone tell me how to brining in these two custom fields into the component configuration.
    Any help is greatly appreciated.

    Hi Prasuna,
    Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
    If you do this, are you able to view the new fields on the screen?
    you mentioned that you are not able to save the data to the table.
    Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
    Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
    Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
    Regards
    Lavanya
    Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

  • New custom field in the POWL search criteria

    Hi experts,
    My requirement is to add a new custom field in the search criteria (Parameters)
    In my Easy shopping card POWL. I need to add custom fields in search criteria.
    I tried appending my custom fields in structure /SAPSRM/S_SEARCHFIELDS
    And customized the POWL type DB criteria SAPSRM_FEEDER_SC by adding the custom field
    But still the newly added search criteria is not displaying in the
    Query   SAPSRM_E_CHECKSTATUS_01 in powl_query transaction.
    Kindly help me to solve this issue
    Regards
    Chinnaiya P

    Hello Konstantin,
    thanks for the reply...
    I tried to add an extra Field(Company code) in POWL Search. the problem is the Field Company code doesnt get updated in BBP_PDHSC and BBP_PDISC with the value used in while creating SC.
    I only get the Company code value in table BBP_PDBEI for SC.
    So when i give any value in POWL search for company code no data is shown even though the SC was created in the inputted Company code.
    so how to go about adding CC as search criteria in POWL so that the resultant output is filtered on the basis of CC value.
    Thanks
    Rajat

  • How to add a new custom field to one set of employees within one country?

    Hi,
    I am thinking of a scenario where a new custom field is dispayed in PA30 for IT0006
    only for one set of employees in US (such as for a employee group or employee sub group).
    Other employees should not have this custom field.
    All employees in this scenario is for US country only.
    Is this possible? Do we need ABAP for this or only IMG will do?
    Any details on how to implement this etc..
    Thanks for any help.

    Thanks for everyone for the responses.
    I really liked the decoupling infotype solution.
    However, since some work has been done in the old way, I will try to describe the problem in detail.
    Our ABAPer already created a new screen 0200 as a sub-screen in ZP000600 module (I am assuming it is a module pool) using PM01 and assigned to 2010 screen; an alternate screen specified in IMG for country 10 as key (instead of standard screen 2000 for IT0006).
    This new screen 0200 is assigned to 2010 in PM01 transaction.
    These steps displays the 0200 sub-screen with added fields to all the US employees hiring in the respective personal action.
    I want to create a new scenario to suppress these additional fields for some US employees (say company code BKUS)
    I placed a new entry in T588M for module pool as ZP000600 , key is 10, alternate screen as 0200 and hide all the fields
    But, these additional fields are still displayed always for US employees for whom I want to hide.
    Did I miss any thing?
    I do not want to hard code in ABAP whom to display and who not to.
    Is there a IMG way to do this so that I can change the criteria later as we go.
    Thanks

  • New custom field in MCVBAK not available for selection in RSA5

    I added a custom field to the communication structure MCVBAK.  When I go to RSA5 and select the Maintenance button to select it, it is not visible in the list.  Do I need to do something other than add to MCVBAK to make it available for selection?
    Thanks.

    Hi Boater,
    Have you included this new field from MCVBAK in the extract structure from LBWE T-code? If you haven't, you need to do this and it will be available in RSA6. Hope this helps.
    Thanks and Regards
    Subray Hegde

  • Error while adding a custom field with Input help via AET

    Hi All,
    I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
    One field is required to have the input search help f4 and autopopulates the second field
    I am able to add one field(not requiring help) successfully through AET .
    I have created one Zsearch_help in se11 and its successfully running  and Autopopulating seocnd field while I am testing it
    While adding second field through AET,I need to enter following details as -
    field label,search relevant ,serach help etc.
    When I type the name of my 'Zsearch_help' against field search help it gives me following error
    'Search help is not compatible'.
    Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
    Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
    Please help me out.Kindly be detailed as I am new to SAP CRM.
    Thanks,
    Shivani

    The question is answered in CRM 7.0 forum:
    Getting error while adding a custom field (with input help) through AET

  • New Customer Field in Shopping Cart (SRM) with default value

    We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
    We have added the custom field and also assigned default value 'X' to it using BADI BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
    /people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
    KR Jaideep,

    Dear Poster
    Your thread has had no response since it's creation over
    2 weeks ago, therefore, I recommend that you either:
    - Rephrase the question.
    - Provide additional Information to prompt a response.
    - Close the thread if the answer is already known.
    Thank you for your compliance in this regard.
    Jason Boggans
    SAP SRM SDN Moderator

Maybe you are looking for