Adding new field from BKPF to tcode FB01 appearing as on selection screen
Hi all,
Could u please let us know to add a field from table BKPF in tcode FB01 ?
1. We did BADI for 'FI_HEADER_SUB_1300 ' and added the required field in the layout.
2. After actiavting, the added field is not getting reflected in the tcode FB01.
Please tel us , where are we going wrong.
Looks like a similar requirement in this: How to Add XREF1_HD(Reference Key 1 internal for document Header) field to header level to transaction FB01
Similar Messages
-
Adding new fields from CI Include to Standard SAP Screen
Hi All,
I am enhancing Infotype 0487. I have added new fields to the CI include and created the screen fields in subscreen 0200 with reference to the data dictionary fields. When I test the subscreen alone, the new fields are displaying correctly and F4 help is active. But when I view the whole screen(2000) in PA30, the new field is inactive and I am not able to enter data. Also F4 help option is present for the field but when it is selected, a message 'No Values Found' is displayed. Please suggest some solution.
Thanks in advance
Regards,
Sivasankari
Edited by: Julynila on Oct 7, 2010 10:41 AMHi,
This might be the standard transaction, so there is a possibility of adding the fields using the Screen variants using SPRO, get in touch with your functional consultant. there you can copy an existing screen and add the required fields and rename the screen to different number, and in the config this new screen can be added.
Thanks,
Srini. -
I added a field to the datasource structure from RSA5 and RSA6.
I replicated the source system.
Would I have to delete the InfoSources and reassign the datasource to see the new field appear in the transfer rules?
Is there a way to see the new field to show automatically after the replication in the transfer rules?Hi Yosemite,
If you can't you find your new field in the extractor from RSA6 and 'Change DataSource', then check the following:
1. Goto SE16 and enter 'ROOSFIELD' in the table name
2. Enter your DataSource name in the 'OLTPSOURCE' and 'A' for the OBJVERS.
3. Check the 'Selection' field value. If it is 'A' (Hidden by SAP) then Change it to 'P'. Then you should be able to see the new field in the Extractor.
Thanks,
Venkat. -
Added new field to cube but data not passed from DSO
Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank -
Adding new field in Billing due list in CRM
Hi
What are ways to add new fields to billing due list in CRM.
Can we use any badi
Is there any configuration of layout.
Any other way
Thanks in advance for your help
AmitHi,
Adding new field in CRM can be done by AET.
AET is able to add new field from Web UI.
Please this blog for more details: /people/tzanko.stefanov2/blog/2008/11/26/application-enhancement-tool-creating-and-reusing-custom-fields-with-crm-70-part-2-of-2
Regards,
Steve -
Adding new field in Database view
Hi,
I am adding a new field to existing database view so only adding is enough or shall I use database utility. Please let me know.
Thanks & Regards,
JosephViews are basically, collection of fields from diffrent databse tables.You can define extra selections for fields in a selection view at runtime using dynamic selections. The extra selections are sent to the database and help to minimize the number of database accesses. This works as long as the database tables in the selection include of the logical database are defined for dynamic selections, and that the database program is programmed accordingly.
You can go to SE11, type the name of the view and add the additional field present in any of the tables and activate the view. Once activated the view will reflect the new field added and you can use this for selection purposes.
Regards
Vasu -
Possibility of adding new fields to migo transaction
Is there a possiblity of adding new fields in migo transaction so that we can enter the base price of items in po.
Also Can we send mail to relevant authorization if there is difference in price entered in the po and the value entered in GRHi, You can use BADI 'MB_MIGO_BADI' for adding custom fields at item as well as header level .
or Check SAP Note 339448 - MIGO: settings of table control
2-You can not do any thing related to price in MIGO, since you cannot enter any manual values in MIGO, it will always pull from PO or MIRO (in case of Imports). -
Adding new fields in Custom Infotype
Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PMPlease search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens -
Question regarding adding new field to an infoset.
Hi all!
Actually i am not a programmer but HR functional, but i need to add an additional field to my infoset.
I wanted to do it myself without ABAPers help.
I have already added new field to an infoset and included a code:
TABLES HRP1000.
SELECT SINGLE short INTO ORG_UNIT_SHORT
FROM hrp1000 WHERE objid = p0001-orgeh.
And it almost works. The thing is, when on the report (sap query) a person have value '00000000' in the p0001-orgeh the report enters value into ORG_UNIT_SHORT from the previous record (of another employee).
How to avoid this? i suppose i have to assign this field an initial value at the begining of the code (how?).. or?? as i said i just try to make first steps in abap programming...Ok, i have found a solution (clear statement)
-
hi friends,
adding new fields to mara by using append structure .
how will insert data to that fields.
thanks.hi,
if u just want to add data to table use sql statements like insert,
modify and update,but if
u want for the screen to pick it up u hav to add a screen for that tcode using badi or exit.
reward if helpful. -
Adding new fields to the data flow
Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveenyes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda -
Adding new fields to assignment block, what are the steps to do this.
CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
JasonHi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda -
I want to add a new field to Standard report tcode : QM10.
hi friends,
I want to add a new field to Standard report tcode : QM10.
how do i manage it without creating a Z report.
Please help...Hi,
SAP provides include structure CI_QMEL for QM10 transaction.
so create CI_QMEL Structure and add field as u need.
But after that u need to assign it some where i don't know , check with ur funcntional consultants.
Thanks,
Ananth -
Adding new field in the table for Output
Hi ,
I need to add a field catalogue as Payment method in the condition table for Output, but the payment method field does not exist in the table. Can this be done?
regards,
RaguHi Refer below link on sdn for adding new Field
Adding New Field to Catalog
Adding New fields to field catalog -
Error on MIGO with added new field that was not pass empty
Hello,
I added new field and screen to MIGO with MB_MIGO_BADI using Sample
Code. It seems on MIGO. But when i pass empty this new field, i take an
error message. So how can i pass empty for this new field?
Best regards,
MunurI send all methods codes by order :
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Jan 11, 2011 5:12 PM
Maybe you are looking for
-
The rings have some, but minimal detail on them, some distortion would be acceptable. Currently I am shrinking them to the correct diameters with the transform tool and the trying to enlarge them with the bloat tool, but perhaps there is a better way
-
Using the scott schema, in my test workspace I created a BC4J project that had 4 tables/view objects using the wizards and taking all the defaults. I created a UIX-JSP project using those view objects. Next I created a new table in the database (Logi
-
Save an excel in specific loaction
Iam exporting my report from crystal report to excel by using a button and formatting this excel sheet using macro by clicking another button.When i export to excel this opens the excel sheet in the browser.i don't want to be seen in the browser but
-
How to modify inbuiltsap smartform for invoice.
please provide me the steps
-
What I want is :After the work order release, the User CANNOT add or remove the material in WO, Is there any standard configuration for this ,or do any ABAP? thanks