Adding new field in Objects(Equipment) either using AET or EEWB.
I have to add a new field in the screen for Objects (under Processing data). To do the same first i tried using AET but i get the "Show Enhancements" and "Create New Fields" buttons grayed out in AET so i assume that AET is not available for Objects(Equipments). Is this assumption right?
Now i tried to add this field through EEWB , so i have to choose a EEW Business Object from the list . Which EEW Business should i choose? I tried choosing INDIVIDUAL_OBJECT but then the only sub-type i can choose is ADS(analytical data storage). Is this right? If no then which EEW Business Object do i choose?
Hi,
Basically, the determination process which application(Sales Order, Service Order, Campaign, Account, Contact, etc) can be enhanced by AET depends on 2 registry information.
1. UI Object Type - Enhanced Object Assignment. Open the table BSP_DLC_OBJ_TYPE.
You see in this table for most of OBJECT_TYPE there is EXT_BO assigned.
If you start AET from one of the application through Config Tool, the application passes the UI Object Type to the Config Tool and the Config Tool passes it again to AET. And AET looks into this table. If there is an EXT_BO found, it makes the "Create New Field" and "Show Enhancement" button active. This is the main determination process.
2. In AXTREG you can find also UI Assignment Node. Here you can find a list of component and view which is registered to a given enhanced object(EXT_BO). However, this list is not complete, because the list of component and view which should support AET gains by the time. So AET does not really rely on this information.
Some of applications are only specialization of the basis application. I.e. BP Financial Service is specialized of BP, BP Identification in IC Web Client is specialized of BP. So basically, if you enhance the account with new field, this field should also available for BP Financial Service and BP Identification.
Unfortunately, I cannot answer the initial question, because I do not have knowledge about the Equipment object.
Regards,
Steve
Similar Messages
-
Added new fields in vendor master in xk01 but data is not getting saved
Hi experts,
To add new fields in vendor master i have followed the following steps :
1.) Appended a structure ZRTGS in LFA1 table with required fields and activated
2.) Added new button in xk01( vendor master ) using spro -> logistics-general -> business partner -> vendors ->
control ->adoption of customer's owaster data fields -> prepare modification free-enhancement of vendor master record
Created a screen group ZR and defined label tab pages with function code ZRTGS and saved entries
3.) Created a implementation for BADIs VENDOR_ADD_DATA and VENDOR_ADD_DATA_CS.
4.) Created a program with my own subscreen for the required fields
The button is getting displayed in XK01, XK02 and XK03 respectively. Whenever the button is clicked the subscreen with
the fields is also displayed. But whenever i try to save the data in either XK01 or XK02 it is not getting saved in to the
database table LFA1.
Request your help in this regard.
Thanks in Advance.Hi,
You may need to check this include .
EXIT_SAPMM06E_008 -->Import Data from Customer Subscreen for Purchasing Document
Thanks,
vamshi -
Adding new fields to the data flow
Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveenyes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda -
Adding new fields to assignment block, what are the steps to do this.
CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
JasonHi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda -
Add new Fields to Opportunity ( TCODE : CRMD_BUS2000111 ) using EEWB
Hi...
I am trying to add new field to Opportunity, TCODE : CRMD_BUS2000111 ) using EEWB.
I am using ...
Business object BUSINESS_TRANSACTION,
Extension type ADD_NEW_FIELDS
Business Transaction Type : CRM Opportunity
Assigned to : Customer Header data.
I am able to generate project and extension successfully. But don't see any new field or custom tab added to transaction for Opportunity ( TCODE : CRMD_BUS2000111 ).
WHEN I CHECKED BACK IN EEWB, DON'T SEE ANY SCREEN OBJECT IN OBJECT LIST.
I can see Tables, Function group, Function Module, Data Element in object list but Screen object is missing. I believe that's the reason why new screen field not has been added. But not able to find out the reason for that.
Your help will be highly appreciated. my e-mail id : [email protected]
Thanks in advance.
MinalHi Minal,
I would suggest to create a new extension with the following:
Create new extension, but use the Enhancement type: "Extend Opportunity"
When you create just two new fields with "ADD_NEW_FIELDS" you have to manually add them into the existing screens.
Hope this helps
Martin -
Adding new fields to business partner relationship
Hi all,
We are trying to add new fields to business partneru2019s relationship using EEWB. We are adding 4 new fields when relationship type is "Is shareholder of", so we have created a new project at transaction EEWB and then a new extension and the wizard is started. At the wizard, we have define the 4 new fields with cardinality 1:1 and time dependent without gaps.
Also we have done all the extension setup, so the new fields only appears when that relationship is created and we can fill the new fields.
The problem that we have is that every time that you create a new relationship type "Is shareholder of", even if you fill the new fields or not, the system spend more than one hour to save the data, having also a "STACK_STATE_NO_ROLL_MEMORY" dump... It seems that the system goes inside a loop that never ends, but we haven't change any function, because the standard functionality is enough for us.
Any help on how to proceed?
Thanks in advance!!Please, anyone can help?
Thanks!! -
Adding new field in Billing due list in CRM
Hi
What are ways to add new fields to billing due list in CRM.
Can we use any badi
Is there any configuration of layout.
Any other way
Thanks in advance for your help
AmitHi,
Adding new field in CRM can be done by AET.
AET is able to add new field from Web UI.
Please this blog for more details: /people/tzanko.stefanov2/blog/2008/11/26/application-enhancement-tool-creating-and-reusing-custom-fields-with-crm-70-part-2-of-2
Regards,
Steve -
Possibility of adding new fields to migo transaction
Is there a possiblity of adding new fields in migo transaction so that we can enter the base price of items in po.
Also Can we send mail to relevant authorization if there is difference in price entered in the po and the value entered in GRHi, You can use BADI 'MB_MIGO_BADI' for adding custom fields at item as well as header level .
or Check SAP Note 339448 - MIGO: settings of table control
2-You can not do any thing related to price in MIGO, since you cannot enter any manual values in MIGO, it will always pull from PO or MIRO (in case of Imports). -
Adding new fields in Custom Infotype
Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PMPlease search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens -
hi friends,
adding new fields to mara by using append structure .
how will insert data to that fields.
thanks.hi,
if u just want to add data to table use sql statements like insert,
modify and update,but if
u want for the screen to pick it up u hav to add a screen for that tcode using badi or exit.
reward if helpful. -
Error on MIGO with added new field that was not pass empty
Hello,
I added new field and screen to MIGO with MB_MIGO_BADI using Sample
Code. It seems on MIGO. But when i pass empty this new field, i take an
error message. So how can i pass empty for this new field?
Best regards,
MunurI send all methods codes by order :
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Jan 11, 2011 5:12 PM -
Adding new fields from CI Include to Standard SAP Screen
Hi All,
I am enhancing Infotype 0487. I have added new fields to the CI include and created the screen fields in subscreen 0200 with reference to the data dictionary fields. When I test the subscreen alone, the new fields are displaying correctly and F4 help is active. But when I view the whole screen(2000) in PA30, the new field is inactive and I am not able to enter data. Also F4 help option is present for the field but when it is selected, a message 'No Values Found' is displayed. Please suggest some solution.
Thanks in advance
Regards,
Sivasankari
Edited by: Julynila on Oct 7, 2010 10:41 AMHi,
This might be the standard transaction, so there is a possibility of adding the fields using the Screen variants using SPRO, get in touch with your functional consultant. there you can copy an existing screen and add the required fields and rename the screen to different number, and in the config this new screen can be added.
Thanks,
Srini. -
CRM PCUI (Imp): Adding new fields & Webpage display in ODC1
Hi Gurus,
Plz help in these PCUI related configurations:
<b>Query 1</b>.
PCUI: Adding custom created field in a new TAB (BSP Iview)
Steps Done
a. Custom field defined in an object (say Opportunity)
b. An event created.
c. A Group Tab Page created
d. A Field group created and a new field name added to the field group (What structure need to be added to this field group?)
e. Entry made in Application Layout for an application i.e. event / position / screen element / tab page / structure . (Again what structure to be added?)
To handle this new field & tab, plz advice
1. What needs to be entered in the screen structure? Do we need to create this structure?
2. The required the model access class defined for the screen structure.
3. Any changes required in the controllers
<u><i>(Where is the linking between custom field defined in the opportunity object and the new field entry made in the filed group)</i></u>
<b>Query 2.</b>
Calling a webpage in a tab (ODC1, Detail area)
Opening a webpage in an iview can be done easily by reating a URL iview.
If the requirement is to open a web page in ODC1, than what are the steps required for the same?
e.g. On clicking a user defined tab the webpage should open in the detail area 1.
<b>Query 3.</b>
We have extended an object (say field addition in opportunity header) through EEWB
Will the added filed be available in PCUI screen also?
Regards,
SAURABHHello SAURABH,
welcome to the SDN Community. Please do not crosspost:
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=66550&messageID=707519">CRM PCUI (Imp): Adding new fields & Webpage display in ODC1</a>.
Regards
Gregor -
Added new field to cube but data not passed from DSO
Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank -
Adding new field in the table for Output
Hi ,
I need to add a field catalogue as Payment method in the condition table for Output, but the payment method field does not exist in the table. Can this be done?
regards,
RaguHi Refer below link on sdn for adding new Field
Adding New Field to Catalog
Adding New fields to field catalog
Maybe you are looking for
-
Multiply 2 variables in RTF templates
Hi, I am trying to multiply a variable with a calculated field--> <?xdoxslt:get_variable($_XDOCTX,'baseline')*(xdoxslt:maximum(current-group/TRGT_RATIO))?> where "Baseline"=xdoxslt:div(sum(current-group()/NMRTR),sum(currnet-group()/DNMTR)) But this g
-
Error : not a GROUP BY expression
Hi everyone, Looks like i need some help here.. :) dont know what it means but im getting this message 00979. 00000 - "not a GROUP BY expression" *Cause: *Action: Error at Line: 137 Column: 36 this is the function: function get_path(materialID in
-
Update form Marketing Document screens from one user to other
I know there is a query somewhere where I can set up all Marketing Document screens for a user then copy it to other users so their Marketing documents have the same look and I don't have to go through each user. Does anybody has that query? Thanks
-
Hello, I've got a problem with the pasteboard. On a spread, the pasteboard is much longer than the others. But only on one spread. If I change the pasteboard preferences, of course, it affects the whole document but my spread is always greater. Do yo
-
Hi there, What is the best way for me to add an "upload file" button to my Muse and BC e-commerce shop? I am selling personalised products where I want the user to be able to upload a photo. Do I need a custom web app? If so are there any which alrea