Adding new field in PO and PR screen

Dear Friends,
Kindly sugest the solution to add new custom field to PR and PO screen at item level in SOURCE OF SUPPLY TAB.
regards
Vishal

Hi,
Check the exit MEREQ001 for PR & MM06E005 for PO.
Hope the above helps.
Regards,
Vivek

Similar Messages

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Adding new field using EEWB and using it for Pricing

Using the Easy enhancement workbench, I have created a new tab containing a new field at the item level of contract. Then in SPRO, in the field catalog, I added a new entry using the same field name and data element name. Created a new condition table with this new field. created access sequence and assigned it to a condition type.
I tried to maintain condition record for the condition type but initially it was showing some error for which I had to implement a new method for the BAdi /SAPCND/ROLLNAME.
Now. condition record is also maintained successfully.
But, the problem is that the value is not reflected at the contract.
Somehow, the condition record is not being picked up.
Please suggest some solution.
Regards,
Anindita RoyChowdhury.

Hi Anindita,
Stpes mentioned in your questions are fine.
You have created new Screen @ item level in Order txn, right?
Did u checked value passed to the method of BAdI ?
As per my knowledge, pricing call must have happened before you fill the Zfield which u added in new screen. Hence no value in field and no effect on pricing.
Regards,
Deven

Adding new field in SC Account Assignment Screen (only for information)

Hi guys,
we have a requirement, to show additional fields within the account assignment screen. The contents should only be displayed as information for the user. It is not necessary, respectively not wanted to save this data within SRM or the Backend-System.
2 questions:
a) Is it necessary to expand the item-structure of the SC (INCL_EEW_PD_ITEM_CSF_SC) AND to expand the accounting structure (INCL_EEW_PD_ACC_CSF) for this fields?
b) Is it sufficient, that the INCL_EEW*-structures of the PO-/billing-document etc. are NOT expanded with the additional fields to avoid the saving? In OSS-Note 458591 it is mentioned, that it is necessary to expand the CI-COBL-structure within the Backend-System.
Thanks in advance with best regards.
Bernd
ps. We are using SRM 4.0.

Hi
We have done this several times, in our past previous SRM implemenatations.
a) Yes. You need to expand the item structure at the Shopping cart level to display your Custom fields in the We bapage. As Per OSS Note - 672960, you can see the details. For display purpose, at least these custom fields must be created in the standard include structures [e.g., INCL_EEW_PD_ACC_CSF, etc ].
b) Yes, no need to expand any other SAP Include structure, incase you don't want the field contents to be saved in backend system (incase of Purchase Order / Purchase Req).
Please see the follwoing links, which deal with the similar requirements, you have asked for in detail with code and other relevant details ->
Re: Item Field Appearing In Account Assignment Field
Re: Control Busniess Area Field in Account Assignment..
Re: Add new account assignment field
Re: Account assignment category not passed into Target Objects Badi
Re: Add customer fields in Shopping cart and purchase order
Re: Hiding CUF fields in SC Basic data
displaying custom fields on shopping cart
Custom Fields in Cost Assignment Tab
How to add the custom field in SRM EBP shopping cart?
Add customer fields in Shopping cart and purchase order
Hope this will definitely help. Do let me know, incase you face any issues.
Regards
- Atul

Adding custom fields in Contract and PO screen

Hi Experts
I am trying to enhance contract and PO screen by creating structure Ci_bbp_hdr_ctr and Ci_bbp_hdr_po
Now I am able to display the required fields on the screen.
Is there any other way to do the same??
I want to change the position of the fields, how to achieve that??
and How to display drop down fields??
Reg,
Rajesh.

Hi Rajesh,
To add the customer fields please have a look at the following OSS Notes:
Note 458591 - User-defined fields: Preparation and use
Note 672960 - User-defined fields 2
Also go through the following blog:
/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
To display the customer field as drop-down list go through the below given thread:
Re: How to display Customer Fields like a dropdown listbox ?
The position of the customer fields depends on the order you added them in the Incluse structure as per the OSS Notes 458591& 672960. If you added a customer field first then it would appear first simlarly if you have added it at the end of the structure it will appear towards the end of the screen.
Hope this helps.
Thanks,
Pradeep

Adding new fields to additional data B screen in sales transaction

Hi All,
I have a requirement like this I need to add 3 input fields and 1 push button(select oppurtunity) in additional data B screen of sales order transaction.If I click on this button I want geneate one pop up dialog box just like as search help box and I should be able to search data for these 3 fields data based on some 4 input fields data?How can I acheive this?I can add button and what I have to write the code in PBO and PAI of this screen?Please some body help me in this regard.
Regards
Mahesh

Hi friend,
In SAP we can add few fields from maintain reserve fields. Please go through it;
Maintain Reserve Fields In Customer Master
There are reserve fields in the customer master record which are not used in the standard system. They are available for use and are as follows:
Customer group 1 (View: V_TVV1 Field:KVGR1)
Customer group 2 (View: V_TVV2 Field:KVGR2)
Customer group 3 (View: V_TVV3 Field:KVGR3)
Customer group 4 (View: V_TVV4 Field:KVGR4)
Customer group 5 (View: V_TVV5 Field:KVGR5)
You can find the fields in the customer master record under the sales and distribution data in Sales. Choose additional data under Environment.
It is advisable to change the field description (Data elements KVGR1 to KVGR5).
This is described in the system modifications in the Reserve fields unit of the customer master record:
Reserve Fields in Customer Master
Record
In this step you maintain the valid entries for the individual views.

Adding new field in va01 and va02 t-code.

hello all,
here in sales order creation t-code and change order t-code's header information in shipping tab all fields coming regarding total waight and total volume and net waight but there is no field of total quantity and intersting thing is this its not coming in whole t-code anywhere.
so friends i want to add this field.
so which method should be followed for doing this.
thanks and regards amit.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4998349&messageID=3132651
Please check this
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
The SAPMV45A , 8309 screen is the Additional Data B tab to add your custom fields . To capture the data from this custon field you can use
the user exit MV45AFZZ, USEREXIT_SAVE_DOCUMENT_PREPARE OR
USEREXIT_SAVE_DOCUMENT depening on your functionality
Regards

Adding new fields from CI Include to Standard SAP Screen

Hi All,
I am enhancing Infotype 0487. I have added new fields to the CI include and created the screen fields in subscreen 0200 with reference to the data dictionary fields. When I test the subscreen alone, the new fields are displaying correctly and F4 help is active. But when I view the whole screen(2000) in PA30, the new field is inactive and I am not able to enter data. Also F4 help option is present for the field but when it is selected, a message 'No Values Found' is displayed. Please suggest some solution.
Thanks in advance
Regards,
Sivasankari
Edited by: Julynila on Oct 7, 2010 10:41 AM

Hi,
This might be the standard transaction, so there is a possibility of adding the fields using the Screen variants using SPRO, get in touch with your functional consultant. there you can copy an existing screen and add the required fields and rename the screen to different number, and in the config this new screen can be added.
Thanks,
Srini.

Adding a new field in searh and result [ comb of 2 other fields ]

Hi ,
I have to add a new field in Opportunity Search and later OpportunitySearch Result. This field belongs to Opportunity Details -> parties Involved view , and is a combination of 2 fields there..Partner function and Main Partner (unchecked ). Details are as below..
Can you please suggest easiest way for achieving this..
Details of the Opportunity Search where I need to add a new search field
Component : BT111S_OPPT
Context Node : SEARCH
View : BT111S_OPPT/Search
Details of the new search field (Present In the Opportunity Details, there is a viewset for Parties Involved ) ..The new search field should be Employee Responsible but not the Main Partner ( kind of a substitute OR Secondary Employee Responsible )..2 employee responsible is permitted in partner determination..
Component : BTPartner
Context Node: BTPartner
View : BTPartner/Partner
Attribute : Partner_fct
Generic Object Type = 1Order
+
Component : BTPartner
Context Node : BTPartner
View : BTPartner/ Partner
Attribute: MainPartner ( Not checked = 0 )
Is there a simpler way without coding to achieve the above?
The route that we have thought of is ...Let me know if there is an alternate simpler way...and If I am missing anything
1.Create a custom field using EEWB ( I am not well aware of AET, and not aware how to enable this in our
environment as we upgraded to 7.0 recently ) For CRM Opportunity Transaction Type.
2.This will be linked to the table CRMD_ORDERADM_H and the related structure
3.Ask the technical team to populate this field from structure COM_DYNP_PARTNER_UI-PARTNER_FCT and COM_DYNP_PARTNER_UI-MAINPARTNER = 0 [(In Transaction crmd_order F1 on employee responsible points to structure COM_DYNP_PARTNER_UI and Mainpartner is a Boolean and hence main partner = 0 means that it is not the main partner ).
4.Add the same field in the search-result as well.
Thanks.
Regards,
Monica.

Hello,
I have looked at wiki below [http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component]
Kindly suggest ways to acheive adding new field in Opportunity Search ( employee responsible which is not the main contact like I mentioned ) which belongs to another component ...Can it be done without coding eg. adding to design layer.
Can you please give steps to do the same.
Thanks.
Regards,
Monica

Adding a new field in EEWB and pulling this to IC 4.0

Hi All
i am trying to add a new field thro EEWB in CRM 40 and link to CRM IC . I have successsfully added the field and the same is now appearing in the IC webclient.
Now I need to passvalues Yes and No and the deafult shall be blank in a drop down list box
How to pass the values. Please forward the code to attach in BSP and where.
Also I need to make this field as mandatory and a error message should be visible in the IC
I shall reward points
SURYA

Hello,
I have looked at wiki below [http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component]
Kindly suggest ways to acheive adding new field in Opportunity Search ( employee responsible which is not the main contact like I mentioned ) which belongs to another component ...Can it be done without coding eg. adding to design layer.
Can you please give steps to do the same.
Thanks.
Regards,
Monica

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

Adding new field in Monitor Shopping Cart

Helll All,
I have a requirement where I need to add a new field in the Search Criteria screen for Monitor Shopping Cart (item data).
The new field needs to have a property so as to be able to add more than 1 value for it. It is just like Purchasing Group criteria present in the standard Shopping Cart Monitor screen.
I have the structure BBPS_MON_SC_ITEM where there is a field PURCHASE_GROUP, which is like a range. I need to add one more field here with the same range structure so as to get values of my new screen field into it.
Coming to my question........In which structure should I append this new field so as to get it in BBPS_MON_SC_ITEM? I have read the note 672960 and tried appending for Table Type fields but no success.
I am working in SRM Version 5.
Kindly help.
Thank you.
Johnson
Message was edited by:
Johnson Ittyerah

Hi
See related links ->
Re: Adding CUF fields in Monitor Shopping Cart Selection Screen
Re: Error while viewing the SC via BBP_MON_SC
Adding fields in shopping cart
Do let me know.
Regards
- Atul

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

Adding new fields mara

hi friends,
adding new fields to mara by using append structure .
how will insert data to that fields.
thanks.

hi,
if u just want to add data to table use sql statements like insert,
modify and update,but if
u want for the screen to pick it up u hav to add a screen for that tcode using badi or exit.
reward if helpful.

Error on MIGO with added new field that was not pass empty

Hello,
I added new field and screen to MIGO with MB_MIGO_BADI using Sample
Code. It seems on MIGO. But when i pass empty this new field, i take an
error message. So how can i pass empty for this new field?
Best regards,
Munur

I send all methods codes by order :
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Jan 11, 2011 5:12 PM

Adding new field in PO and PR screen

Similar Messages

Maybe you are looking for