Adding New Field in table control

Hi all,
I am going to add one new field in existing table control ,which already contains nearly 20 fields, so my field should be21st field,
here when I am going to add new field , I need to add the field from work are from the same program. So , I am selecting the option Get from Program, here I am getting the error the field does not exist in the generated version of the program.
Regards,
Siddivinesh Jogu

Hi,
I think you forgot to activate the program after creating the new field in the internalt able so first ensure the program is properly activated and then try the same.
Regards,
Himanshu

Similar Messages

Adding custom fields in table control of infotype 0591

Dear Experts,
My requirement is to add custom fields x y z in the Table contol of the standard infotype 0591 (Nominations) screen in PA30 tcode.
Is it possible to add the fields in table control after the fields share,guardian's address, without using access key.
if so, help me to know the procedure.
Please suggest.
Warm Regards
Sinde.

hi..
a thread already exists with the same Subject.. pls check if it helps u....

How to add new field to table control data not displayed

hi
I have added some nwe fields to already existing table control added three new fields...
though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
pls suggest where the problme may be
nishant

First try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
before you show the screen.

Adding custom fields in table control of PO

Hi Everyone,
I have a requirement which i need to display the custom fields in the Table Control(Item Overview) of PO. Since our Version is 4.6C there is no badi's avilable to do the changes. Please let me know how can we solve this problem.
Mentors: Forgive me if it is repeated Post...
Edited by: subas Bose on Feb 5, 2010 12:10 AM

Hi,
Search for user exit...either screen or field exit..this will solve your problem.
Small help on how to find a exit;
1. find out the package
2. go to se84 with the help of package in the cutom exit tab look for all the exit.
3.put the brek point and tack where you can get the solution.
Pooja

Adding extra fields to Table Control?

Hi Experts,
Here I hv a table control, with 5 fields, 1,2,3,4,5.
So, I need to add extra 3 fileds to the above said existing table control i.e.
6th field in between the 3 & 4,
7th field in between the 4 & 5,
8th field in the last i.e. after 5th,
I tried with Table Control Wizard, but not succeeded. So, pls, mention the steps to b followed to achieve this?
ThanQ.
Message was edited by:
Sridhar

Hi,
Go to SE51
Give the program and screen number..
In the menu..choose..utilities -> settings..
Uncheck the graphical painter check box..press enter..
Choose the layout radion button..
Press change..
Double click on the table control..
THen press the CTRL Elements button..
In the popup...insert (+ button) to place the input field
THanks,
Naren

Adding dinamic fields into table control..

hi friends,
i wan to knw , is it possible to add fields dynamically in table control? actually the requirement is like, it is not fixed how many fields will be their in table control, it may change depending upon date. so if u knw, please help me out....
good points will be awarded to helpful answer.....
Thanks,
Brij

HI,
at the design time of the screen make all possible columns or fields in the table control,make sure you are having all the fileds in the itab.
now go to the pbo of the screen.
inside the loop endloop of table control write loop at screen .
inside this loop for all the fields base dupon condition you dont want to appear make screen-invisible = '1'.
modify screen.
hope this solves your query...
thanks
vivekanand

Adding field to Table Control

Hi Folks,
     I have a requirement of adding a field in Table control of Standard SAP transaction also updating the same in standard SAP database table.
     The field is also not existing in the table, it is also added to the table using Append Structure.
    Will this be possible using some Screen Exit?
Thanks in Advance.
Punit

Hi Poorna,
   Thanks for the reply.
   I have to add field to the txn QM02. User will specify the value for the custom field in this txn and the same should be updated in the database table.
   The field is not a std SAP field, it is added to the table using append structure.
Thanks,
Punit

Adding field to Table Control using screen exit

Hi Folks,
I have a requirement of adding a field in Table control of Standard SAP transaction also updating the same in standard SAP database table.
The field is also not existing in the table, it is also added to the table using Append Structure.
Will this be possible using some Screen Exit?
Thanks in Advance.
Punit

Hi Punit,
There are various screen user exits(QQMA0001,QQMA0008,QQMA0010,
QQMA0011,QQMA0012) available for this transaction but all are related to adding a subscreen.So, I am not very sure whether we can modify a table control for this transaction. So, If possible if u r requirement still can be acheived with creation of a subscreen then it would do only if the exits which were mentioned above belongs to u r main screen..
Regards,
Swaroop

Adding new field in the table for Output

Hi ,
I need to add a field catalogue as Payment method in the condition table for Output, but the payment method field does not exist in the table. Can this be done?
regards,
Ragu

Hi Refer below link on sdn for adding new Field
Adding New Field to Catalog
Adding New fields to field catalog

ADDING A NEW FIELD IN TABLE MAINTENENCE GENERATOR

I HAVE A REQUIREMENT OF ADDING A FIELD TO DATA BASE TABLE .
THAT ADDED FIELD SHOULD BE ABLE TO MAINTAIN IN TABLE MAINTANENCE GENERATOR WHICH IS ALREADY THERE.
CAN YOU GUYS TELL ME HOW TO ADD NEW FIELD IN TABLE MAINTENENCE GENERATOR.
PLEASE TELL ME HOW TO DO THIS .
I AM USING 4.6C

Hi
Add a field to existing table and delete the maintenance generator and re create the same
Regards
Shiva

Adding new entry in table J_1INEXCGRP

Hi,
I am MM functional, due to some system error , for the excsie group I required to manitain the entry in table J_1INEXCGRP, as that customization part is not included in request, now I want to confirm which methode to be use
SE12->Utilities -> Table content -> create entry or with SE16N
can you please give the stpes for adding a new entry in this table it has only two fileds
MANDT
J_1IEXCGRP
regards,
zafar
Moderator Message: Spoon-feeding is not entertained here.
Edited by: kishan P on Jan 25, 2011 4:58 PM

Hi Alok,
Hope this steps - code will help you to resolve this issue.
1. Create A Group for your table control. In Screen Painter.
2. Write Screen modification routine for the same
it can be like this..
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
LOOP AT SCREEN.
 IF screen-group1 = 'MOD'.
 IF flag = ' '.
 screen-input = '0'.
 ELSEIF flag = 'X'.
 screen-input = '1'.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
ENDMODULE.
3. This will disable the display of the Fields in TABLE Control.
4. in the PBO loop of the table control. Identify the lines which u want to keep active.
Hope this will help
** Reward points to helpful answer

Possibility of adding new fields to migo transaction

Is there a possiblity of adding new fields in migo transaction so that we can enter the base price of items in po.
Also Can we send mail to relevant authorization if there is difference in price entered in the po and the value entered in GR

Hi, You can use BADI 'MB_MIGO_BADI' for adding custom fields at item as well as header level .
or Check SAP Note 339448 - MIGO: settings of table control
2-You can not do any thing related to price in MIGO, since you cannot enter any manual values in MIGO, it will always pull from PO or MIRO (in case of Imports).

How to add a field and table control to BP transaction.

Hi,
I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
Can some on please help me if having a solution and with any relavant documents.
Thanks in advance.
Raj & Khader.

Also explore with EEWB tcode.
Refer this threads
Re: EEWB
Created New fields in Business Activity with EEWB
Cheers
Manohar

Add a new record to table control

Dear all,
How to add a new blank record to a table control?
Following code is not working for adding a new blank record to a table control
MODULE USER_COMMAND_0100 INPUT.
    SAVE_OK = OK_CODE.
    CLEAR OK_CODE.
    CASE SAVE_OK.
      WHEN 'EXIT'.
        LEAVE PROGRAM.
      WHEN 'APND'.             " A button "Add" to add a new record to table control
        REFRESH IT_KNA1.
        CLEAR IT_KNA1.
        APPEND IT_KNA1.
    ENDCASE.
ENDMODULE.
Thanks you

Hope you have done all table control specific coding
refer this example program
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5e35c111d1829f0000e829fbfe/content.htm

Adding new fields to assignment block, what are the steps to do this.

CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
Jason

Hi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda

Adding New Field in table control

Similar Messages

Maybe you are looking for