Adding new field to MB51 screen output

Hi All,
I need to add a new field TCODE2 from MKPF table on the screen output of MB51. I have added my new field thro SPRO following the below steps:-
Go to SPRO -- MM -- Inventory Management and Physical Inventory -- Reporting -- Define Field Selection for Material Document List
Here I have give
RM07DOCS MKPF TCODE2 Transaction code -- output box checked
and saved.
Now I tried to re-execute the transaction MB51 but not able to see the Tcode2 on the output screen .
Can any one help me out, if I am missing out something or is there any thing else i need to check on the ALV output to see the field TCODE2 on the screen og MB51?
Regards
Shilpa.

Hi,
Check these notes:
Note 357187 - MB51: Fields in field catalog / selection screen
Note 828104 - Enhancing MB51 for AFS
I hope this helps you
Regards
Eduardo

Similar Messages

KE5Z : UserExit or SAP Note for adding new fields in the report output

Hi,
I want to add 2 new fields in KE5Z (Profit Center: Actual Line Items) report output.
Order reason(AUGRU), Sales Document Type (AUART) fields.
Is there any UserExit or SAP Note available for this....
Thanks in advance,
fractal

Hi Fractal,
See if Note 92864 will help you.
Summary
Symptom
Through a modification, it is possible for you to include additional fields in the profit center line-item reports 'actual' and 'plan' (Release 3.1*).
Additional key words
KE5Z, KE5Y, RCOPCA02, RCOPCA08 -
SUPPORTGUIDE 20010613143936 -
REPORTWRITER,
SGRW_OM SGRW_PS SGRW_PC SGRW_SL SGRW_PCA SGRW_EC SGRW_LIS
Cause and prerequisites
The fields must be located in table GLPCA (for actual) or GLPCP (for plan).
For Release 3.0F, you should ensure you have applied Note 62511 first.
Solution
To include a field in the actual line item report, proceed as follows:
Call the ABAP/4 Dictionary (Transaction SE11) and display table GLPCA. You can then find in a line the field name and data element for the field you want to include.
Return to the initial screen of the ABAP/4 Dictionary. Now change the structure RPCA2. If the structure does not yet contain the field, you select Edit -> Insert field; enter the field name and data element. Do not insert the new field at the beginning of the structure but in the rear half of the structure.
Then save and activate the structure.
Now call the ABAP Editor (Transaction SE38). Change the source code of program RCOPCA02. Insert the lines set out in the attachment in FORM routine FIELDCAT_FILL. When you do this, replace SGTXT by the field name of the field. If you normally want the field to be displayed when you the access the report, delete the line afield-no_out = 'X'. "<<<< insert Note 92864 .
You should note that the place where you insert the lines influences the position of the column in the report list.
To include a field in the Plan-line-item report, carry out the same procedure except with table GLPCP, structure RPCA8 and program RCOPCA08.
Note: Pls check if these 2 fields are available in any of the layout versions you have available with the transaction.
Cheers,
Vikram
Pls reward for helpful replies!!

Adding New Field in MB51

Dear All,
Requirement is to add new field 'Ship-to Country' in standard report RM07DOCS (MB51) , How can I go about it ?
1) Updating the enhancement points which exists in the report ?
2) Raising Query in SAP to get any OSS notes
3) Copy the standard RM07DOCS into Z Program and add this new field ?
Kindly suggest the best method asap.
Thanks
Nav.

Hi,
You can try through SAP configuration.
Path: SPRO -> Materials Mgmt -> Inventory Mgmt & Pyhsyical Inv -> Reporting -> Define field selection for material document list.
Otherwise you may want to copy program RM07DOCS to ZRM07DOCS and modify the code to include your own fields. Also you may want to create your your own transaction code let's say ZMB51. This way you can include any customer fields
Regards
Kiran Sure

Adding new field in search screen (In drop down field)

Hi,
I have added a new field as search criteria in searching sales order. (means in drop down this field will be displayed.).
But, now I want to restrict the operators to only 'IS'. Can anybody help me, how to do this.
Thanks,
Sandeep

Hi ,
You need to go to transaction code BSP_WD_CMPWB transaction, and then open up the component in your case it might be BT115S_SLSO and then go to the view BT115S_SLSO/SlsOrdSQ , and then go to the Configuration tab and then click on Copy Configuration (if there is no customer configuration) , assign the Role Config Key, and then it will go into the change mode and then you can default the value of IS for the field.
try out this, and let me know if it meets your requirement.
Hope it helps.
Regards
Sidd

Adding new field in me21n(screen exit)

Hi
I want to add a customer field in PO layout at ITEM LEVEL.
I have already placed this field on screen. But I am not able to write code for the same.
My another requirement is - the customer field should be updated in the database.
Regards
Harshada

Try This
EXIT_SAPMM06E_001
EXIT_SAPMM06E_004
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
EXIT_SAPMM06E_009
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
EXIT_SAPMM06E_018
REgards.

Adding new field in the table for Output

Hi ,
I need to add a field catalogue as Payment method in the condition table for Output, but the payment method field does not exist in the table. Can this be done?
regards,
Ragu

Hi Refer below link on sdn for adding new Field
Adding New Field to Catalog
Adding New fields to field catalog

Adding new fields from CI Include to Standard SAP Screen

Hi All,
I am enhancing Infotype 0487. I have added new fields to the CI include and created the screen fields in subscreen 0200 with reference to the data dictionary fields. When I test the subscreen alone, the new fields are displaying correctly and F4 help is active. But when I view the whole screen(2000) in PA30, the new field is inactive and I am not able to enter data. Also F4 help option is present for the field but when it is selected, a message 'No Values Found' is displayed. Please suggest some solution.
Thanks in advance
Regards,
Sivasankari
Edited by: Julynila on Oct 7, 2010 10:41 AM

Hi,
This might be the standard transaction, so there is a possibility of adding the fields using the Screen variants using SPRO, get in touch with your functional consultant. there you can copy an existing screen and add the required fields and rename the screen to different number, and in the config this new screen can be added.
Thanks,
Srini.

Adding a new field to VA05 Report output

Hi All,
Please suggest what's the best method to add the new field in the report output of VA05 this can be done in 2 ways one way is by writing the code in theUser exit PERFORM MOVE_USERFIELDS or copy the whole program to Zprogram and write the Code?Ist one need access key but the the other method is not required.
Please suggest me the best method
Thanks&Regards
Mahesh

Hi Mahesh,
i'm in the process of making a similar change,
copying to a ZPROGRAM is not so difficult, but as i told you you have to add your new field to VBMTV structure, and copy the includes that you need to change,
P.S. Note, when you copy you have to change some SELECT statements where
it's selecting from T180V table based on sy-repid, you hav to change sy-repid to SAPMV75A, as there's some configuration done for this.
Regards,
Raghavendra

R12 Format Payment Instructions - new field required in report output

Hi
I need to add a new field in the report "Format Payment Instructions " output. How can I add the logic to pick this field and then add to the layout.
As per note 562806.1, it gives instructions on how to re-arrange the layout of the format payment instructions but not regarding adding logic to pick new fields.
Any help would be appreciated.
Regards,
Alister

Hello
Could you plse help me out in adding new filed in BaCS format program .
We are in Release 12,I need to customize the format program by adding new fields
I tried generating a new template by following meta link note .. but that itself is erroring out.
If you have any sample code and the steps plse send it across
Any help is deeply appreciated
Regards,
Priya

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

Adding new fields mara

hi friends,
adding new fields to mara by using append structure .
how will insert data to that fields.
thanks.

hi,
if u just want to add data to table use sql statements like insert,
modify and update,but if
u want for the screen to pick it up u hav to add a screen for that tcode using badi or exit.
reward if helpful.

In BDCs, after adding one field to the screen, which one is the better proc

Hi,
My client requirement In BDCs, after recording the legacy data by using MM01, After some time adding one field to the screen, How can we record the for the new field.
If any one knows pls help me total process.
Warm regards,
Venkat.

Identify the screen in which this new field is added and simply add one more line to add the bdc record for this field in that screen.
If the screen is also entirely new, then you have to identify the previous screen, the okcode to go to this new screen and finally the next screen and the okcode to go to the next screen along with the field BDC record.
I don't think it is necessary to redo all the recording as long as you can follow the existing code.

Error on MIGO with added new field that was not pass empty

Hello,
I added new field and screen to MIGO with MB_MIGO_BADI using Sample
Code. It seems on MIGO. But when i pass empty this new field, i take an
error message. So how can i pass empty for this new field?
Best regards,
Munur

I send all methods codes by order :
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Jan 11, 2011 5:12 PM

CRM PCUI (Imp): Adding new fields & Webpage display in ODC1

Hi Gurus,
Plz help in these PCUI related configurations:
Query 1.
PCUI: Adding custom created field in a new TAB (BSP Iview)
Steps Done
a. Custom field defined in an object (say Opportunity)
b. An event created.
c. A Group Tab Page created
d. A Field group created and a new field name added to the field group (What structure need to be added to this field group?)
e. Entry made in Application Layout for an application i.e. event / position / screen element / tab page / structure. (Again what structure to be added?)
To handle this new field & tab, plz advice
1. What needs to be entered in the screen structure? Do we need to create this structure?
2. The required the model access class defined for the screen structure.
3. Any changes required in the controllers
(Where is the linking between custom field defined in the opportunity object and the new field entry made in the filed group)
Query 2.
Calling a webpage in a tab (ODC1, Detail area)
Opening a webpage in an iview can be done easily by reating a URL iview.
If the requirement is to open a web page in ODC1, than what are the steps required for the same?
e.g. On clicking a user defined tab the webpage should open in the detail area 1.
Query 3.
We have extended an object (say field addition in opportunity header) through EEWB
Will the added filed be available in PCUI screen also?
Regards,
SAURABH

Hello SAURABH,
welcome to the SDN Community. Please do not crosspost:
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=66550&messageID=707519">CRM PCUI (Imp): Adding new fields & Webpage display in ODC1</a>.
Regards
Gregor

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

Adding new field to MB51 screen output

Similar Messages

Maybe you are looking for