Adding new fields in CAA1/2/3 through BDT

Hi,
My reqirement is to add some custom fields on the contract account screen ( CAA1/2/3 ).
I am new to BDT... please help me out
Edited by: abapdevelopersap on Nov 1, 2010 9:07 AM
Moderator Message: Please search for available information before psoting.
Edited by: kishan P on Nov 1, 2010 1:52 PM

HI Pawan,
You need to add the fields manually.
If you have any doubt, please refer to the discussion below:
how to add a field in Info Source
Regards,
Ashvin

Similar Messages

CRM PCUI (Imp): Adding new fields & Webpage display in ODC1

Hi Gurus,
Plz help in these PCUI related configurations:
Query 1.
PCUI: Adding custom created field in a new TAB (BSP Iview)
Steps Done
a. Custom field defined in an object (say Opportunity)
b. An event created.
c. A Group Tab Page created
d. A Field group created and a new field name added to the field group (What structure need to be added to this field group?)
e. Entry made in Application Layout for an application i.e. event / position / screen element / tab page / structure. (Again what structure to be added?)
To handle this new field & tab, plz advice
1. What needs to be entered in the screen structure? Do we need to create this structure?
2. The required the model access class defined for the screen structure.
3. Any changes required in the controllers
(Where is the linking between custom field defined in the opportunity object and the new field entry made in the filed group)
Query 2.
Calling a webpage in a tab (ODC1, Detail area)
Opening a webpage in an iview can be done easily by reating a URL iview.
If the requirement is to open a web page in ODC1, than what are the steps required for the same?
e.g. On clicking a user defined tab the webpage should open in the detail area 1.
Query 3.
We have extended an object (say field addition in opportunity header) through EEWB
Will the added filed be available in PCUI screen also?
Regards,
SAURABH

Hello SAURABH,
welcome to the SDN Community. Please do not crosspost:
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=66550&messageID=707519">CRM PCUI (Imp): Adding new fields & Webpage display in ODC1</a>.
Regards
Gregor

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

Adding new fields to the data flow

Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveen

yes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda

Adding new fields to assignment block, what are the steps to do this.

CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
Jason

Hi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda

Adding new field in the table for Output

Hi ,
I need to add a field catalogue as Payment method in the condition table for Output, but the payment method field does not exist in the table. Can this be done?
regards,
Ragu

Hi Refer below link on sdn for adding new Field
Adding New Field to Catalog
Adding New fields to field catalog

Adding new field in Billing due list in CRM

Hi
What are ways to add new fields to billing due list in CRM.
Can we use any badi
Is there any configuration of layout.
Any other way
Thanks in advance for your help
Amit

Hi,
Adding new field in CRM can be done by AET.
AET is able to add new field from Web UI.
Please this blog for more details: /people/tzanko.stefanov2/blog/2008/11/26/application-enhancement-tool-creating-and-reusing-custom-fields-with-crm-70-part-2-of-2
Regards,
Steve

Possibility of adding new fields to migo transaction

Is there a possiblity of adding new fields in migo transaction so that we can enter the base price of items in po.
Also Can we send mail to relevant authorization if there is difference in price entered in the po and the value entered in GR

Hi, You can use BADI 'MB_MIGO_BADI' for adding custom fields at item as well as header level .
or Check SAP Note 339448 - MIGO: settings of table control
2-You can not do any thing related to price in MIGO, since you cannot enter any manual values in MIGO, it will always pull from PO or MIRO (in case of Imports).

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

Question regarding adding new field to an infoset.

Hi all!
Actually i am not a programmer but HR functional, but i need to add an additional field to my infoset.
I wanted to do it myself without ABAPers help.
I have already added new field to an infoset and included a code:
TABLES HRP1000.
SELECT SINGLE short INTO ORG_UNIT_SHORT
FROM hrp1000 WHERE objid = p0001-orgeh.
And it almost works. The thing is, when on the report (sap query) a person have value '00000000' in the p0001-orgeh the report enters value into ORG_UNIT_SHORT from the previous record (of another employee).
How to avoid this? i suppose i have to assign this field an initial value at the begining of the code (how?).. or?? as i said i just try to make first steps in abap programming...

Ok, i have found a solution (clear statement)

Adding new fields mara

hi friends,
adding new fields to mara by using append structure .
how will insert data to that fields.
thanks.

hi,
if u just want to add data to table use sql statements like insert,
modify and update,but if
u want for the screen to pick it up u hav to add a screen for that tcode using badi or exit.
reward if helpful.

Error on MIGO with added new field that was not pass empty

Hello,
I added new field and screen to MIGO with MB_MIGO_BADI using Sample
Code. It seems on MIGO. But when i pass empty this new field, i take an
error message. So how can i pass empty for this new field?
Best regards,
Munur

I send all methods codes by order :
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Jan 11, 2011 5:12 PM

Adding new fields from CI Include to Standard SAP Screen

Hi All,
I am enhancing Infotype 0487. I have added new fields to the CI include and created the screen fields in subscreen 0200 with reference to the data dictionary fields. When I test the subscreen alone, the new fields are displaying correctly and F4 help is active. But when I view the whole screen(2000) in PA30, the new field is inactive and I am not able to enter data. Also F4 help option is present for the field but when it is selected, a message 'No Values Found' is displayed. Please suggest some solution.
Thanks in advance
Regards,
Sivasankari
Edited by: Julynila on Oct 7, 2010 10:41 AM

Hi,
This might be the standard transaction, so there is a possibility of adding the fields using the Screen variants using SPRO, get in touch with your functional consultant. there you can copy an existing screen and add the required fields and rename the screen to different number, and in the config this new screen can be added.
Thanks,
Srini.

Adding new fields in the layout.

Hi gurus,
I have a requirement in which i need to change the layout of a report v.25 through transaction VOKF. Actually i have added one field VDATU in the table VBMTV and the fields of this table are getting displayed in the output but not all fields. so through the transaction VOKF a variant has been created with some fields and there is also option for additional fields addition. But the field which I have added new through append structure doesnt appear in the possible value fields.
So do anyone have any solution for this or if anyone has ever encountered this type of issue.
Thanks in advance.

I have added the field VDATU in the Structure VBMTV and the structure is active. This field is getting filled in the my Standard report and and is displayed only when change the layout after displaying the output.My requirement i need this field by default in the output.
Thanks in advance.

Adding new fields in web ui for complaint transaction

hi all,
i am able to add new fields thru eewb but my question is how these fields will reflect in web ui
and where these values will be stored i.e in which table?
do we need to create any z tables if yes how ?
plz help me out
thanks
madhuri

HI,
When u add a new field through EEWB wizard, that field add in related table. Suppose u r adding a field for Complaint , for that u have to choose Business object for complaint.
After this step when u run wizard, not only this field will add in Complaint table but wizard also generate BADI, FM,some structures and data element and also some classes.
U can find all these related generated methods , structure etc from General Data of Task.
U dont need to create any Ztable, wizard take care itseld all data storage and handling.
Regards
Gaurav

Adding new fields in CAA1/2/3 through BDT

Similar Messages

Maybe you are looking for