Adding New Fields to a BEx Query does not show up in the CR field explorer

This could be a silly question.
I have a CR report based on a BEx query. I had to add a couple of new fields to the BEx query, and when i want to add those fields to the CR report, I don't see them even after I do a refresh in the field explorer.
How do i see this new fields in the CR report?
Help Please
Thanks

Hi,
you can open the report and go to the menu Database > Verify Database.
that should add the new fields to the list of fields in CR
Ingo

Similar Messages

Added fields does not show up in the RSA6

Hello.
Problem 1:
I am enhancing 0bbp_td_sc_1. I added a field to the structure, but it does not show up in the rsa6. ( I double clicked on the extractor name). If I go to the extractor structure (BBP_SC_BW_GET_TD_STRUC), I am able to see the append. The structure is activated. The append structure is also activated (Zabbp_sc_bw_get_td_struc).
What can be wrong? I did not see the added the field in the ROOSFIELD table either.
Problem 2: What is the difference If I populated the field value from RSU5_SAP_BADI to the rsap001 user exit EXIT_SAPLRSAP_001?
I am not able to run debug RSU5_SAP_BADI. STOP does not stop. While I debug, I am able to see the field ( The field I added from problem 1). But the value never populated.
I am able to run the debug for EXIT_SAPLRSAP_001. I see the data populated for the field. But in RSA3 result, I am not able to see it.
Thanks in advance.

Hi
1. this is usualy the case if the append struct is not active or you did not add the new fields in the append struct.
I would suggest to remove the fields save activate and re do the process making sure you either use an existing append struct or create a new one.
2. BADI are different then UE in the way they are implemented. I will recommend using UE.
You will not see the enhanced fields in the out put of RSA3 so I stop on the last line and check the values in the struct.
to debug I would either go to the UE (in a different session) and put a break point there and run RSA3 or check the debug in RSA3 and then find the SAPEXIT that calls the UE.
I hope this helps.
Reg's
Edan

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

TS3276 I created a new mailbox in mail, but it does not show up in my list

I created a new mailbox in mail, but it does not show up in my list of mailboxes. Now I cannot change it or delete it. I keep getting an error message that I must resolve conflicts, but it won't let me change anything. Can you help me fix this?

Found it, thanks to the answer Vixen-of-Venus gave - thanks.

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

TS3716 My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?

My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?

Hey, Thanks a lot. It took quite a bit of time to resurrect this ipod. I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new. This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted. Finally, it recognized my ipod and started to download each song. It took awhile as there was 602 songs, but finally it works. Yea!!! I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information. This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone. Take care, Karen

Bex report does not show loaded data at once

Hi experts,
Why Bex report does not show loaded data at once after loading is finished but after some time?
Could be the reason of it:
a) huge amount of data in infocube.
b) there are no deleting/creating indexes before/after loading, because it takes too much time
c) anothe reason?
Thank you,
Tigr_Z

Hi Tigr,
A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
C - it can be resource issue, so please look into all and double check with basis if thats the case.
Regards
Sunny

After downloading album covers (some not found) itunes does not show most of the covers.

After downloading album covers into iTunes iTunes does not show most of the covers. It showas blank white boxes except for those where "cover not found" (music notes).
You have any idea how this happens, perhaps with location of the files.

iTunes refuses to play/read file, it cannot recognizes headers, or recognizes those as corrupt, but giving no error messages. The problem is the stored artwork(s) on your music files. To correct this, select the files that are corrupted/cannot be played on iTunes&iPod, click "Convert ID3 Tags...", then select v1.1 from the dropdown box (first, try this on a few to see that my solution is working).
By doing so, iTunes replaces headers, but your ID3 tags will not be changed (I assume you are using ID3 v2.4), nor you'll lose any info or anything else. This works as a hotfix for those files. If you try to replace headers via another program, your information will be truncated, and any artwork stored will be deleted. So I recommend this one.
You'll see that iTunes cannot play most of the files that has artwork(s) stored in them. New version hasn't fixed this problem, and it has risen with iTunes 8.2.x. If it's going to take long, I suggest you should go back to 8.1.x.
With best regards,
lyravega, goekhan.

I updated my macbook with lion and airdrop does not show up in the finder, how could this be?

I updated my macbook with lion and airdrop does not show up in the finder, how could this be?

shldr2thewheel wrote:
If this is the case: How to enable AirDrop over ethernet and AirDrop on unsupported macs running Lion .
http://osxdaily.com/2011/09/16/enable-airdrop-ethernet-and-unsupported-macs/
Interesting. Googling, I see that someone posted that on these discussions as well:
https://discussions.apple.com/thread/3331216?start=0&tstart=0
which mentions what I recall: that Airdrop (as implemented by Apple) would create an on-demand ad-hoc Wi-Fi connection, even if you were already connected to an access point. Normally, you can't connect to multiple Wi-Fi networks, thus the reason for Airdrop only supported on newer Wi-Fi chips.
And Apple's KB:
http://support.apple.com/kb/HT4783

A movie i purchased does not show up in the download after it suddenly stopped while downloading over half way through

a movie i purchased does not show up in the download after it suddenly stopped while downloading over half way through.. help!

I totally agree, I am not going to discredit your comment as everyone is entitled to their opinion as I am BUT, I will not bad mouth other members, especially since may have not have written my initial statement in a logical manner so Ill try and answer them in order to your response.
1. I DO LIKE iTunes in general and on the whole BUT I dislike the new update, iTunes 11, it has completely buggered everything up.
2. Prior to the update, everything worked brilliantly, including Apple TV. It was user friendly and was easy to use. The new update is counter-intuative and is hard to find, fix anything and as I have had to find out at my cost, reset my Apple TV and start downloading all over again. So let me reaffirm, it is iTunes11 I find hard to fathom, not the old iTunes.
3. No I am not a developer but I have been using PC's for over 20 years so I do know how one works.
4. Good Question about who would help me, again, it is someones opinion against someone elses. One day, I may write something that generally people agree with, another they may not, depends on the subject.
5. " I do not love Apple" ?yet I have an iPhone 4s, iPad and Apple TV, find that an illogical comment!
6. I have made a General Search on the forums on the subject and the general consensus is that the new update is one update to far.
7. Oh, I am not a genius otherwise I would have solved the issue in the first place!
Just to re-iterate, I am not bad mouthing Apple in general, all I am saying is that iTunes 11 is one update to far and I am not the only one saying it.... some have gone a lot further than I have, again, their opinion and who am I to argue with them as I have an opnion as you do and I will most deffinatly not bad mouth a member because I disagree with them for the above reason, debate it, yes, not belittle them.
Hope these have cleared up my initial statement?

Yesterday I reset my settings on my iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

I have an app that does not show up on the left under iTunes. How do I delete it?

I have an app that does not show up on the left under iTunes. How do I delete it from my Iphone 5?

If the icon exists on your screen, just do a long press on that icon and when the small X appears on top of the app, press it and it will delete it. As long as this is not an Apple app, since those cannot be deleted.

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

HT1386 I am trying to sync my ipad3 to my itunes on a pc laptop, the ipad does not show up in the itunes left hand column. an ipod is already synced to the itunes. any suggestions welcome

I am trying to sync my ipad3 to my itunes on a pc laptop, the ipad does not show up in the itunes left hand column. an ipod is already synced to the itunes. any suggestions welcome

Hi lindaasw,
Welcome to the Support Communities!
Do you have the latest version of iTunes for Windows installed? I would turn on the sidebar and the menu bar just to make sure you are seeing everything. If the iPhone is still not recognized in iTunes, follow these troubleshooting steps:
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy

Adding New Fields to a BEx Query does not show up in the CR field explorer

Similar Messages

Maybe you are looking for