Adding new ipad to existing account - help!

I'd like to use both my old iPad and new on the same account, but "provide valid values" error message appears with each attempt on that initial page with "cellular #, email, passcode if required, and last four digits of SS#". Info is correct according to my account settings which I access via the old iPad.. Many repeat attempts here over the last week - what can I be doing wrong?

Sure - It's the ATT&T cellular account opened through my first ipad, for the that ipad. I'm hoping to add a new ipad to the account as I still wish to use the old one for awhile too.
On this new ipad, it seems it will allow this, but on the initial screen for cellular registration, I can't get beyond the remedial information. I feel like there is something ridiculously obvious I am doing wrong.
I'm hoping someone has done this before, and has insight as to what I am oblivious to.
Thanks!!

Similar Messages

HT5925 I have an iCloud email on my iPhone that is now old as hacked and unused. I can't access anything as it asks for that account info and I don't remember the password etc. How do I delete it and replace it with my new iPad email? ! Help..

I have an iCloud email and Yahoo email on my iPhone that is now old as hacked and unused. I can't access anything as it asks for that account info and I don't remember the password etc. How do I delete and replace it with my new iPad email? ! Help..

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.

How do i sync my new iPad to my account

I got a new iPad, but when i contect it to my laptop it doesn't auto start my itunes and my iTunes doesn't seem to see it.

Do you have the latest version of iTunes, version 11.1, on your computer (iOS 7 requires iTunes 11.1+) ? If you are using a PC then you can see your current version via the Help > About iTunes menu option.

Lost all apps after syncing new iPad to macbook pro - HELP!!!

I tried to sync my new iPad to my macbook pro. I got a message saying all my new apps I bought on my iPad did not transfer. I did the whole deauthorize/authorize thing and restarted to no avail. Now when I try to use those apps on my iPad they don't work. The screen flickers and the I'm back at homescreen. I spent a good amount of money on these apps. Help please!!
I'm MAC OS 10.6.8 and the iPad is the latest running 5.1.1

If it's apps that you've downloaded from the store that you're having problems with, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

Installing lr on a new computer with existing account

I'm having trouble installing LR on to my new computer using my existing account. I can only seem to get the trial. Please help

You have a CC account??

I want to switch my new iPad to my account, email etc and put the old iPad under my husbands account, email etc. How do I do that?

i just bought the new iPad and want to change the older iPad to my husband and have it use his email account, name and other apps and put the new iPad under my email, accounts etc.

Sync and backup your old iPad one last time and then connect the new iPad to iTunes and you will be given the option to set up as new or restore from the backup of the old iPad. Choose the restore from the backup option. After the iPad restores, follow that with a sync with iTunes.
You can erase the old iPad by going to Settings>General>Reset>Erase all content and settings. Then your husband can set it up as a new device and sync with his own iTunes library or content.

Adding Cost Center to existing account

We found out that we need to add a cost center to an existing account that has a couple journal entries posted to it.
What is the correct way to go about this?

Hello,
I'm worried but you can not assign cost center to posted items. There is one way I thought that, If you don't create a cost element for this account yet, please transfer amount to a dummy account without cost center(if cost element created for this account please use DUMMY cost centers) and then you can create a cost element for this account. After that you can transfer amount from dummy account to cost element with correct cost center.
Regards,
Burak

HT5205 Holw can I move or copy my games (such as Candy Crush and Bubble Witch) to my new IPad? Can anyone help me?

how can I copy games (candy crush anbd bubble witch to use on my new IPAD Mini?

Hey amjour3,
Thanks for the question. The following resource may answer your question:
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Thanks,
Matt M.

New iPad 2 user needs help watching TV episode

I am a brand new iPad 2 user and have downloaded a free TV episode to my iPad. I can't find it to watch it though. I can only seem to pull up a 30 second preview, even though it says that the full episode is downloaded. How do I watch the full episode. I should add that I am only a very basic iTunes user as well on my PC.

Downloaded and synced films and TV shows go into the Videos app :
The iTunes app on the iPad is just the iTunes store

'find my ipad' enabled I cannot access the ipad as the use account originally set when new no longer exists, please help, now in DFU mode but still needs passcode!

I have deleted my Apple ID from the apple store but had it previously associated with my Ipad, that I set 'to find' my ipad. but since i've deleted the orginal account I cannot access my ipad! The ipad is currently in DFU mode but still asks for a password, please help!

Your Apple ID still exists with the most recent password that you used. You can use it to erase your iPad. Read this.

Help adding new WLC to existing ACS

Hi All,
I need help with this.
This network has a working WLC that authenticates wireless users against an ACS by MAC address. It works fine.
I need to add a new WLC.
I added the WLC, the APs connect to the WLC fine, but the users get limited connectivity and we've found out that is because the new WLC is getting authentication errors against the ACS.
The configuration of the new WLC is exactly the same as the current working WLC and both controllers show as AAA clients on the ACS.
I want to know if somebody can point me out in the right direction to solve this.
There's connectivity fine between all devices (as far as PING goes), and there's no Firewall or filters in between.
The difference I see on both WLCs is that on the working one (WLC1), under Security - AP Policies, we see the AP Authorization List with the MAC addresses/cert type/hash. We don't get this information on the non-working WLC (attached document shows both)
Also in the attached document, I'm sending the errors I get no the WLC2 controller.
Any help is greatly appreciated.
Federico.

Federico,
I didn't get you when you say that you see only One WLC under groupsetup/Mac address. Could you please elaborate this?
Also, if you don't know see any NAR configured under shared profile component then check inside the group/user setup there must be either ip based or CLI/DNIS based NAR configured for WLC's and looking at failed attempts it seem that action is denied.
HTH
Regds,
JK
Do rate helpful posts-

How do I synch my new iPad to existing Kindle account?

I just bought an iPad in Turkey , where I use my Kindle with no problems. Want to download the Kindle App from Apple Store and it doesn't show one as available. Turkey is not included in the list of countries that are shown in Amazon.com for US users.
Is there anyway I can access my existing kindle e-books?
Hope this makes sense.
Thanks for any suggestions

It doesn't look like Amazon have made their Kindle app available in the Turkey store, so you won't be able to download it.
You could try using the Kindle cloud reader via Safari : http://read.amazon.com/
Info about it : Kindle cloud reader

Adding new fields to existing cube

Hi all,
We have a cube with data, now we added 2 new fields to the datasource. And want to add two more fields in the Cube to correspond to the new fields. What would be the impact on the data that is already there in the cube? Can I go ahead and add the fields in the cube and start extracting data? What I want to know is what would be the implications in such a scenario?
Any insight or help would be appreciated and fully rewarded.
Thanks,
Mav

Hi,
At least from the experience I had there were no performance issues. The only issue would be in terms of the time taken to transport. The larger the amount of data ,longer the transport time.
You can continue extraction of data for those 2 fields from that point on. No need to empty the data from the cube and reload again. Only thing is that the data in the past for these 2 fields may not be mapped to the existing data in the cube. If you want to do that dump the cube and reload. Otherwise the data will be mapped from the time you start extracting the new fields with the data in the cube.
Cheers,
Kedar

Cancelling a line and and adding new lines to existing PO using API

Hi,
Can any one please help me know how I can cancel a line and insert new lines into a existing PO using any API.
Many Thanks,
Srinivas.

VanessaC_VZW wrote:
However, if you do not want a contract on the new lines, (since you will have your own equipment), the activation fee will be $35.00 per line. If you agree to a 2-year contract for the share lines, the activation fees will be $25.00 per line.
You can add the new lines by calling our Telesales Department at 800-256-4646.
Thank you,
Really?! I didn't know that made a difference...I thought secondary lines were $25 - well, ya learn something new every day!
And a side note - we added a line for my 75+ yr old mother with one of our old flip phones and CS was extremely kind in waiving the activation fee (I could have sworn it was $25 charged and credited on the bill), PLUS they boxed up the flip phone after activating it (with an out of state number to boot) and shipped it to my Mom, all at no additional cost to me. I'm not saying that will be everyone's experience, and I was amazed the service rep offered to ship it for me - but I smiled and said "THANK YOU!" and accepted it!

Adding new field in SC Account Assignment Screen (only for information)

Hi guys,
we have a requirement, to show additional fields within the account assignment screen. The contents should only be displayed as information for the user. It is not necessary, respectively not wanted to save this data within SRM or the Backend-System.
2 questions:
a) Is it necessary to expand the item-structure of the SC (INCL_EEW_PD_ITEM_CSF_SC) AND to expand the accounting structure (INCL_EEW_PD_ACC_CSF) for this fields?
b) Is it sufficient, that the INCL_EEW*-structures of the PO-/billing-document etc. are NOT expanded with the additional fields to avoid the saving? In OSS-Note 458591 it is mentioned, that it is necessary to expand the CI-COBL-structure within the Backend-System.
Thanks in advance with best regards.
Bernd
ps. We are using SRM 4.0.

Hi
We have done this several times, in our past previous SRM implemenatations.
a) Yes. You need to expand the item structure at the Shopping cart level to display your Custom fields in the We bapage. As Per OSS Note - 672960, you can see the details. For display purpose, at least these custom fields must be created in the standard include structures [e.g., INCL_EEW_PD_ACC_CSF, etc ].
b) Yes, no need to expand any other SAP Include structure, incase you don't want the field contents to be saved in backend system (incase of Purchase Order / Purchase Req).
Please see the follwoing links, which deal with the similar requirements, you have asked for in detail with code and other relevant details ->
Re: Item Field Appearing In Account Assignment Field
Re: Control Busniess Area Field in Account Assignment..
Re: Add new account assignment field
Re: Account assignment category not passed into Target Objects Badi
Re: Add customer fields in Shopping cart and purchase order
Re: Hiding CUF fields in SC Basic data
displaying custom fields on shopping cart
Custom Fields in Cost Assignment Tab
How to add the custom field in SRM EBP shopping cart?
Add customer fields in Shopping cart and purchase order
Hope this will definitely help. Do let me know, incase you face any issues.
Regards
- Atul

Adding new ipad to existing account - help!

Similar Messages

Maybe you are looking for