Adding new modules to Selection-screen

Hi everyone,
I created 3 selection-screens for my report, but I needed to control better their jump between screens, so I added PAI modules on each screen.
The thing is that when I make a change on one of the screens the calling of the module disapears, so I just kept on placing the calls and avoided the change in the screens.
No the problem is, when I transported my report to the quality system, everything was fine, with my modules in my code. Now I transported a change and in the quality system, the calls where lost.
Any ideas how to transport everything?!
Thanks

You must not modify the screen (add PAI or PBO) with a program type 1 (report).
If you want to modify screen, you change your program type module pool and create the screens.
Salu2.

Similar Messages

Difficulty in adding new parameter in selection screen of GR55 report

Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
Meenakshi

Hi meenakshi239,
you can always use implicit enhancement spots.
Regards,
Clemens

Adding new table dynamic selection screen of transaction FBL5N (LDB DDF).

Hi,
I have a requirement to add SEGMENT (CEPC-SEGMENT) field on the dynamic selection screen of transaction FBL5N (LDB DDF).
Please let me know how can I meet this requirement
Thanks

I did not find any screen exits for this Tcode, may be you need to use enhancement spots.

Adding layout variant to selection screen

Hi all,
         Currently I am working on report program, where I have to allow user to select his own output pattern. i.e layout variant is to be added to selection screen. The report uses object oriented ALV for display purpose. [set_table_for_first_display]
I made following steps,
1.     Declared one parameter of type disvariant.
2.     At selection-screen on value-request I called function REUSE_ALV_VARIANT_F4.
3.     Passed internal table to method set_table_for_first_display.
Now I am able to create save new variant, on selection screen I can select the variant that I have created, but output shows the all the fields though
Only few are selected. Please tell me any modification so as to reflect the changes in output.
I am searching for a function which maintains fieldcat according to user defined variant.
Regards,
Nilesh kulkarni.

U have to use REUSE_ALV_VARIANT_EXISTENCE inorder to use the layout u have selected
After ur code of REUSE_ALV_VARIANT_F4.
try this way
AT SELECTION-SCREEN.
   PERFORM PAI_OF_SELECTION_SCREEN.
G_REPID = SY-REPID.
G_SAVE = 'A'.
FORM PAI_OF_SELECTION_SCREEN .
IF NOT P_LAYOUT IS INITIAL.
    MOVE G_VARIANT TO GX_VARIANT.
    MOVE P_LAYOUT TO GX_VARIANT-VARIANT.
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
         EXPORTING
              I_SAVE     = G_SAVE
         CHANGING
              CS_VARIANT = GX_VARIANT.
    G_VARIANT = GX_VARIANT.
ELSE.
    PERFORM VARIANT_INIT.
ENDIF.
ENDFORM.                    " PAI_OF_SELECTION_SCREEN
FORM variant_init .
CLEAR G_VARIANT.
G_VARIANT-REPORT = G_REPID.
ENDFORM.                    " variant_init
Then when u call ALV for display, pass ur display variant, in this case = g_variant
Reward if useful
Cheers
~Arun
Message was edited by:
        Arun Shekhar

Module Pool Selection Screen

The user wants the custom module pool selection screen to look like a list selection screen. Meaning that they want to have the multiple selection box come up at the end of the field. I don't think that this is possible but maybe someone has some ideas

Use code like the following in your TOP include.
Note that we have defined screen 500 in the code.
Now in your transaction code for this module pool set this as the openingscreen. Please revert in case of any clarifications.
Code.
=AF---
selection-screen : begin of screen 500 as window.
selection-screen : begin of block abc with frame title text-001.
select-options : s_bukrs for mseg-bukrs no intervals no-extension
obligatory.
parameter : p_postdt like mkpf-budat obligatory.
select-options : s_vendor for mseg-lifnr.
selection-screen : end of block abc.
selection-screen : begin of block def with frame title text-002.
parameter : c_fore radiobutton group g1 default 'X',
c_back radiobutton group g1 .
selection-screen : end of block def.
selection-screen : end of screen 500.
at selection-screen.
if sy-ucomm = 'CRET'.
perform get_data.
endif.

Adding a new field to selection screen -Effect on variant

Hello,
If we add a new (non obligatory) field to a slection screen, is there any impact on existing variants? Does SAP regenerate each variant when the screen change transport get applied? We had a DB lock jam situation in our PRD system for VARI table and the previous day some program changes with a added selection screen parameter ( a check box) had moved).
Regards,
Hari.

Adding a field to the selection screen shouldn't affect existing variants (but the field will be blank for all variants). However, if there is a problem, you should be able to retrieve variants with program RSVARDOC_610.
Rob

How to call Function Module in Selection Screen

Hi All,
I have developed one HR Report (Qualification Overview Report: To display all active employees and their Qualifications along with their Proficiency).
Already it has 3 selection fields on selection screen and now I want one more field on selection screen like Qualification Id.
But when the end user press F4 it should display the Popup which comes in TCode: PA30 at the time of Creating Qualification.
I have debugged the Standard Code and searched the Function Module: 'RH_OBJID_REQUEST' which shows Popup which I wanted to show at Selection screen for newly added field.
So I have to define new field like 'Qualification Id' and want to attach above Function Module so that it will cater my requirement.
If anybody has worked on this type of requirement then please let me know.
Thanks,
Jay.

Hi Raymond,
I have written following code:
s_quali is used in selection screen for Qualification Id.
SELECT-OPTIONS : s_quali   FOR hrp1000-objid NO INTERVALS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_quali-low.
CALL FUNCTION 'RH_OBJID_REQUEST'
    EXPORTING
      plvar           = '01'
      otype           = 'Q'
      seark           = '*'
      seark_begda     = '18000101'
      seark_endda     = '99991231'
      set_mode        = 'X'
    TABLES
      sel_objects     = git_objects.
LOOP AT git_objects INTO wa_objects.         " Logic is to fill up the Selection screen field
    s_quali-low = wa_objects-objid.
    APPEND s_quali TO s_quali.
    CLEAR : s_quali, wa_objects.
ENDLOOP.
Now problem is that, its not populating all values in selection screen which I select from Popup screen (Choose Qualification).
I checked that the first value in the internal Table is over written by second records in the internal table
For e.g.: If I select 001,002,003,004 from Popup screen then I am able to see only 002,003,004 in the Multiple selection view of that field though it is available in the internal table s_quali (because I am filling up the table using Loop-Endloop)
Please advise me how to overcome this issue. (How to fill up selection screen)
Thanks,
Jay.

Adding new field to MB51 screen output

Hi All,
I need to add a new field TCODE2 from MKPF table on the screen output of MB51. I have added my new field thro SPRO following the below steps:-
Go to SPRO -- MM -- Inventory Management and Physical Inventory -- Reporting -- Define Field Selection for Material Document List
Here I have give
RM07DOCS MKPF TCODE2 Transaction code -- output box checked
and saved.
Now I tried to re-execute the transaction MB51 but not able to see the Tcode2 on the output screen .
Can any one help me out, if I am missing out something or is there any thing else i need to check on the ALV output to see the field TCODE2 on the screen og MB51?
Regards
Shilpa.

Hi,
Check these notes:
Note 357187 - MB51: Fields in field catalog / selection screen
Note 828104 - Enhancing MB51 for AFS
I hope this helps you
Regards
Eduardo

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Adding fields to vendor selection screen

Hi ,
While creating a shopping cart from SRM portal, i need to select a vendor. For vendor selection screen, i want to add two additional fields: 1)Sort Term 1: ADDR1_DATA-SORT1 2)Order Currency: LFM1-WAERS
I want to know:if this can be possible by doing any SRM config in SPRO in SRM or is it a development work in which fields would be added to structure.
Please reply asap and also the procedure to do that.
Regards,
Bis

Hi.
Have you read SAP Note 672960? This describes how to add customer defined fields to the shopping cart, therefore also visible during the SC creation process. You would probably also need to implement the BBP_DOC_CHANGE_BADI to fill in the requested data in your new fields.
DM

Adding fields to the selection screen of IW38

We have added some fields to the CI_AUFK include, they have also been added to the RIHAUFK_LIST structure. Currently the new fields appear in the ALV when the report is run.
What I need to do is add them to the selection screen.
Has anyone done this? I have been looking for a user exit etc, no luck.
Thanks, Mike

Why not use the new enhancement framework?
Goto the main program in SE38 and click on the Enhance button - spiral icon (Shift+F4) and try to add new selections at the appropriate by implementing the appropriate enhancement.
I am sure you can achieve it using enhancement spots.
cheers,
Aabhas

Add new fields to selection screen for standard billing dule list in CRM

Hi ,
I have one issue with standard program ,tcode is /BEA/IPMI01.
SUB: Adding few new fields like IP to selection screen AND few fields to output list.
As this is a standard program (tcode: /bea/ipmi01) , i searched for BADI,EXITS but couldn't .
Can any one help me how to handle this with out cloning the standard one.
I got some information but succeed.
in SPRO.
/CRM/BILLING/SYSTEM ENHANCMENTS/access billing engine navigator. you will find selection design in the path
/CRMB/OBJECT/DL/REPORT/SELECTION GROPS/DLA/SELECTION FEIDLS.
we can find selecton at this place but i couldnot find how to add new fieds.
Note: i found whatever we do , it willl reflect once we regenerated the program.

Hi,
You may be able to create an append structure to the standard output structure/table. Go to SE11, open the structure and click on append structure.
Regards
Prasenjit

Adding logo/image on selection screen

How can I add logo or image on my selection screen??? or else use a picture as a background on the selection screen??
P.S : I have already searched the forum and have not got any suitable answer..most of them are about adding image on module pool screen..but I want it in my selection screen???

Hi ,
Try like this
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
**& Form show_pic
FORM show_pic.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 55
left = 750
top = 08
width = 350.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = 'C:\zpic.gif'.
*here you give the path where your pic is stored on the desktop
IF sy-subrc NE 0.
ENDIF.
ENDFORM.
Regards,
Nandha

How to Change the Font Size in Module Pool Selection Screen?

Hi,
There is a module pool, and I need to change the font size mentioned in the selection screen. Could you plaese tell me, how will I be able to do that?

Hi ,
If you are asking for text field , then check the options avaliable in Display tab of Attributes.
Hope this helps you.

Add a New Field to Selection Screen of VL10 Transactions problem

Hello,
i have tried to add a selection field in the VL10G. I have used the docu from Gaurav Jagya (Thanks to Gaurav) an followed the steps. Here you can find the docu: Link: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e07c282f-e2b4-2c10-e4b3-a314fc17b6a1]
In the Step 2 , Point 4 i declare the Select option ST_MTART and use it later in Step 5 in the form USEREXIT_SELECT_OPTIONS_TRANSF.
Step 2.
4. Write the declaration of new select-option inside include ZV50RSEL_MTART.
DATA: V_MTART TYPE MARA-MTART.
SELECT-OPTIONS: ST_MTART for V_MTART.
Step 5. Transfer values from selection screen to range.
For this step, again an access key is required to modify include V50R_USEREXIT_TRANSF.
1. Open include V50R_USEREXIT_TRANSF in change mode. It will ask for an access key. Enter the same and proceed.
2. Write following line of code inside form USEREXIT_SELECT_OPTIONS_TRANSF:
CX_SELECT_OPTIONS-MTART = ST_MTART[].
When i start the VL10G it works fine, but when i start another VL10* transaction i get a dump. Example VL10:
Runtime Errors         SYNTAX_ERROR
Date and Time          20.04.2010 13:54:00
Short text
     Syntax error in program "RVV50R10C ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLV50R_PRE" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "RVV50R10C " in include
      "V50R_USEREXIT_TRANSF " in
     line 18:
     "field "ST_MTART unknown. .."
It dumped, because the form V50R_USEREXIT_TRANSF is used in EVERY VL10* transaction and the select-option is declared ONLY in my Z-include.
Is the someone out there, who has solved the problem? Is the an error in the docu or am i wrong?
Thanks!
Andreas

Has there been any further information on this issue in this or any other threads. I am encountering the same issue as identified by Andreas.
Thanks,
Brian

Adding new modules to Selection-screen

Similar Messages

Maybe you are looking for