Adding New SAP System in System Configuration

Hi
i want to add a new system in Portal
i follow the path system administration -- system configuration -- portal content -- <my folder> -- < add system template >
i can successfully do this
in the objects i have maintained
Connector
where i have given system details like IP Address,Logical name, Client Sys Nos,remote Host Type,SID
i have also maintained
User Management
where i have given logon Method <UIDPW>,User Mapping Type as <admin,user>
i have created a system Alias also
now when i do the Connection Test
i m getting the following error
Error
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties
how can i rectify this error and if this is not the right forum in which forum i need to post this message please suggest.......
Regards
Neha Shah

Hi,
which System Template did you use?
Did you maintain the Usermapping in the identityManagement for the User that is currently logged on?
Did you set 'Authentication Ticket Type' to 'select'?
Kind regards
karin

Similar Messages

GuiXT: Recently we have added new SAP system EIQ

Hi,
Our client is using GuiXT since long time. Recently my firm started
taking care of GuiXT operations. Recently we have added new SAP system EIQ. GuiXT is not working on the new system. It is working fine with other existing SAP system EIT and EIK. Please let me know what all GuiXT related settings need to be done on the new server.
Thanks in Advance
Regards
Gaurav Raghuvanshi
Message was edited by: Matthew Billingham - Please read the Terms and Conditions re: "urgent"

Hi Gaurav,
You need an additional key for the new system, which Synactive will provide as part of your client contract. Once you have the new key configured in the guixt ini file, everything should work as desired.
Good luck.
Best,
Vishal

What's the difference between old SAP appraisal system and the new SAP appraisal system?

Hi Experts,
What's the difference between old SAP appraisal system and the new SAP appraisal system?
Can anyone shed some light please.
Thanks.

emgr_update no longer sets or gets the thesaurus from workbench. In 11 all workbench configurations are saved in IFCR configuration directly.
Hence the thesaurus entry should be added directly in version 11 Workbench as opposed to xml file in older versions.
And if you want to migrate the changes across environments then import_site script in control directory can be used.

How to Create a SAP R/3 system in system configuration

Hi,
i am new to EP Any body tell me how to Create a SAP R/3 system in system configuration.Thanks in advance.
Thanks
kiran.B

Hi Kiran,
To create SAP R3 System follows this steps :
in system landscape
(1)create new system
(2)select SAP system using dedicated application server
(3)give system name and id
(4)finish
(5)open system and set following properties
     Connector
     - App. Host              : r3 server name
     - Gateway Host        :
     - SAP client             :
     - SAP System Name:
     - SAP System No.    :
     - Server Port             : 3200 (Default)
     - System Type
     - give system Alias
     User Management
     - Logon Method
                  UIDPW

Adding new Remote System unavailable in Web Service Request

Hi,
I created a CRUD Web service from a table using web service generator.I added a new remote system to the repository.When I invoke the create operation (which has key mapping "Yes"),it says "Remote System not found in the repository"
I am able to view the Remote System via Data Manage though.
Any ideas?
Regards,
Premjit

Hi Premjit,
When did you added new remote system?
Before generating web services.
Or After generating web services.
If you have added remote system after generating web services.
Then try re-generating web services using web service generator.
Regards,
- Shailesh

Transfer GL Accounts to a new SAP System

I need to transfer G/L accounts to a new SAP system.
I am trying to use Data Transfer Workbench. I need to know do we create it in the Company Code from where I have to move the GL master data or in the target system.
One more question, after Extract GL Master Data file is generated-the next step is to create the spreadsheet file. I am not able to find where we do it.
All help is appreciated.

I am using the tcode SXDA. The next step as explained in the SAP R/3 documentation is Processing a file with spreadsheets. It done as follows:
Import the file using a spreadsheet program and set the columns to the data format Text.
Edit the file using the spreadsheet. You can enter your data manually or copy it from another spreadsheet file.
When you have finished editing the file, save it with the extension "txt".
But I am not able to figure out how to do that. If anyone knows, please explain little bit in more detail like how can I import the file using a spreadsheet program.

Configuring change pointer in SAP DEPOSIT MANAGEMENT system

Hi,
I am working on SAP Deposit Management system, which is very much similar to a normal R/3 system.
I need to create a change pointer everytime a business partner is created or changed. Can you please guide me through the steps especially
1. what would be the message type i need to configure and activate in BD50
2. What is the object name and Table name that i should select in BD52
And also if there is anything else I need to be doing?
Cheers,
Babs. 

Hi Babs
Here are my suggesstions.
1. There are different message types available for business partner, seems it depends on what data you want make synchronous. Try with BUS1006, search for BUPA* for message types.
2. Here you can try for the above message type with object type BUPA_BUP and table as BUT000
Cheers
Manohar

How to copy the bookmarks which are created in SAP BW 7.3 to New SAP BW on Hana System?

Hi,
We have requirement of moving the Bookmarks from SAP BW 7.3 system to New SAP BW on Hana System.
Please let me know if it is possible? If possible how to do it.?
Thanks,
tms

Hi TMS,
Are you talking about Web template bookmark or QueryDesigner bookmark?
If yes then in both the cases its is stored in your client machine as a browser favourite.This has nothing to do with HANA or BW system.So you can transfer browser favourite file from one system to other.
If you are talking about in anyother context please be precise and more elaborate .
Thanks & Regards
A.Dinesh

"I have New SAP System"

Hell All,
I had a fresh Sap System How to configure all the connections.
Regards,
ch.

Hi ch:
Take a look at the SAP notes below.
Note 184971 - "Notes on BW source system connections"
Note 1478123 - "FAQ: Source system"
Note 184447 - "Building a BW-system landscape"
Regarrds,
Francisco Milán.

SAP R/3 System analysis

Hello!
Before the upgrade from R/3 4.6C to ECC 6.0 I would like to execute SAP R/3 system analysis.
The following functions should be included in this program:
- detailed analysis of system modifications (effort driver and risk factor during an Upgrade)
- comparison against a SAP ERP 6.0 reference system
- extension SAP tools, including RBE and conflict lists (SPAU/SPDD)
- syntax analysis of program code with respect of adjustement need
- quality control of own development
- control of amount of transports within different company areas
- control of user information, such a user type, logon date, etc.
- basic control, whether a sufficient authorization concept is available
- Identification of objects that should be considered for the archiving in oder to decrease the db-size
My question are:
- which tasks can be convered with SAP standard transactions what are the names of the transactions?
- which effort do I investigate for these tasks?
Thank you very much!
regards

Dear Thom,
To know the functionality changes u can refer http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes and http://service.sap.com/upgrade for functional changes.
Need to consider the following things:
For Reportsits custom developed program so unless there is any kind of change in requirement from the client regarding the layoutnothing needs to be changedI think it will work fine in ECC 6.0 toexcept few things may needs to be changed..so you need to discuss whether they want the reorts as it is right nowor want to change the layout (adding some new info/fields etc) of any reportso u need to modify the program for thoseand estimate accordinglyfor a medium complexitys Report dev it takes approx 9 pd (FRSTDSCoding+Unit Testing)so to modify it will be less than that (depending upon the scope of changes)
Now say for Batch Inputs(interface/Data Migration) using BDCyou need to see how many BDCs are thereagain if the field lengths and layouts are not changingthen no need to change anything (except the main thing..you need to change the obsolete function modulesthere are some in 4.6 c like for data upload ws_upload_*** is there 4.6C but obsolete in ECC6.0there are some new with enhanced functionality so you need to modify the BDCsand many cases it happens that the whole transaction screen changes for processin that case better to develop new BDCsso you have to consider those parameterlook into and estimate accordinglymodifying a BDC should not take more than 1 PD
Now say for Formsthere was no Smart form in 4.6Cform printer was there..though the same option is there in ECC 6.0 too..but better to go for/should go for Smart formin that caseits complete new devso estimate accordinglya medium complexitys form should take 8 PD (FRSTDSCoding+Unit Testing)you can take it as 10 PD tooeven if client wants to keep it is as it was in older versionyou have to redevelop the layout in ECC 6.0 againas form printer is even client dependentmaximum you can copy the program associated with that form in the new version tooand your effort will be savedagain you have to consider if clients wants to change the layout too
Now for enhancementso in that case u need to see individual casesfor a medium complexity enhancement it should take max 15 PD (FRSTDSCoding+Unit Testing)
One more important thing is that the Unicode Compatibilitythis needs to be done.needs to change the code (variable name) accordingly.also Version management tool is used for the standard programs
Also pls find the following forums:
Re: Data Migration from 4.6C to ECC 6.0
List of transations supported in SAP 4.6c and not in ECC6.0
Re: Upgradation from 4.6C to ECC 6.0
Re: what's the advantage to upgrade 4.6c to ECC5.0...
RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005
Upgrade batch inputs from 4.6C to mySAP ERP 2005
/thread/317225 [original link is broken]
Upgrade from SAP R/3 to ECC 6.0
Hope it will help you.
Thanks,
Atin
Reward points if it helps.

SAP R/3 System analysis before upgrade 4.6C -- SAP ECC 6.0

Hello!
Before the upgrade from R/3 4.6C to ECC 6.0 I would like to execute SAP R/3 system analysis.
The following functions should be included in this program:
- detailed analysis of system modifications (effort driver and risk factor during an Upgrade)
- comparison against a SAP ERP 6.0 reference system
- extension SAP tools, including RBE and conflict lists (SPAU/SPDD)
- syntax analysis of program code with respect of adjustement need
- quality control of own development
- control of amount of transports within different company areas
- control of user information, such a user type, logon date, etc.
- basic control, whether a sufficient authorization concept is available
- Identification of objects that should be considered for the archiving in oder to decrease the db-size
My question are:
- which tasks can be convered with SAP standard transactions what are the names of the transactions?
- which effort do I investigate for these tasks?
Thank you very much!
regards

Dear Thom,
To know the functionality changes u can refer http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes and http://service.sap.com/upgrade for functional changes.
Need to consider the following things:
For Reportsits custom developed program so unless there is any kind of change in requirement from the client regarding the layoutnothing needs to be changedI think it will work fine in ECC 6.0 toexcept few things may needs to be changed..so you need to discuss whether they want the reorts as it is right nowor want to change the layout (adding some new info/fields etc) of any reportso u need to modify the program for thoseand estimate accordinglyfor a medium complexitys Report dev it takes approx 9 pd (FRSTDSCoding+Unit Testing)so to modify it will be less than that (depending upon the scope of changes)
Now say for Batch Inputs(interface/Data Migration) using BDCyou need to see how many BDCs are thereagain if the field lengths and layouts are not changingthen no need to change anything (except the main thing..you need to change the obsolete function modulesthere are some in 4.6 c like for data upload ws_upload_*** is there 4.6C but obsolete in ECC6.0there are some new with enhanced functionality so you need to modify the BDCsand many cases it happens that the whole transaction screen changes for processin that case better to develop new BDCsso you have to consider those parameterlook into and estimate accordinglymodifying a BDC should not take more than 1 PD
Now say for Formsthere was no Smart form in 4.6Cform printer was there..though the same option is there in ECC 6.0 too..but better to go for/should go for Smart formin that caseits complete new devso estimate accordinglya medium complexitys form should take 8 PD (FRSTDSCoding+Unit Testing)you can take it as 10 PD tooeven if client wants to keep it is as it was in older versionyou have to redevelop the layout in ECC 6.0 againas form printer is even client dependentmaximum you can copy the program associated with that form in the new version tooand your effort will be savedagain you have to consider if clients wants to change the layout too
Now for enhancementso in that case u need to see individual casesfor a medium complexity enhancement it should take max 15 PD (FRSTDSCoding+Unit Testing)
One more important thing is that the Unicode Compatibilitythis needs to be done.needs to change the code (variable name) accordingly.also Version management tool is used for the standard programs
Also pls find the following forums:
Re: Data Migration from 4.6C to ECC 6.0
List of transations supported in SAP 4.6c and not in ECC6.0
Re: Upgradation from 4.6C to ECC 6.0
Re: what's the advantage to upgrade 4.6c to ECC5.0...
RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005
Upgrade batch inputs from 4.6C to mySAP ERP 2005
/thread/317225 [original link is broken]
Upgrade from SAP R/3 to ECC 6.0
Hope it will help you.
Thanks,
Atin
Reward points if it helps.

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

Cannot see CCMS Monitor Templates - System is not configured

I just finished installing SAP Netweaver Trial, and I have been able to login using the SAP* and DDIC accounts.
I can see the standard tree via the SAP client GUI.
I am trying to take a look at the CCMS Monitor Sets, and I can see the standard collection of "Entire System", "Performance Overview", etc. all fine.
However, when I double-click to load any of the monitors, I see nothing inside.
No sub-trees, nothing.
I enabled "Display error nodes" and see a node that says
"NSP : System is not configured"
I have tried creating my own user, adding in profiles like SAP_ALL, S_A.System, etc.
I also notice everytime I access the CCMS Monitor Templates, there is an entry in the Syslog:
Severity: Warning
Process Type: D0
Transaction Code: RZ20
Client: 001
User: DDIC
Message ID: BYE
Description:
Database: Invalid parameter ObjTooLar transferred to database interface
Please let me know if I am missing any components, or if there is something I need to do.
Thank you.

Thanks Sunny.
That thread did indeed helped me to resolve the issue.
However, the thread did not really provide clear instructions to complete newbies like me.
For those who also have the same issue, this is what I did:
1. Execute RZ10 (Edit Profiles) via the SAP client GUI
2. Click on the menu Utilities - Import profiles - Of active servers
3. Edit the "Instance Profile" NSP_DVEBMGS00_{Your Computer Name}
Select Extended Maintenance, and select Change
4. Change the following two parameters:
alert/MONI_SEGM_SIZE from 0 to 60000000
rdisp/autoabaptime from 0 to 300
5. In the SAP MMC, right-click on NSP and select Restart
6. After restarting, login and you should be able to see the CCMS Monitor Template nodes

System is not configured for WS Securitylogon

Greetings,
I've created and attempted to begin transport of my first provider service.
I'm having some issues in our QA system
The SE80 objects attached to a transport & transported no problem.
I had to manually add the ICF objects onto a transport but I got 'em there
I had to manually create the Service and Endpoint definition in SOAMANAGER
Unfortunately in our QA system I'm getting the following error in SOAMANAGER.
has anyone else seen this error, and if so, how did you or your BASIS team resolve it?
Error: ICF: Cannot generate ICF information from SOAP information[System is not configured for WS Securitylogon (SAP Note 1319507)]

Hi Doug,
I haven't seen this before but I had a quick look at SAP Note 1319507 & it gives a clear indication of how to fix this with report WSS_SETUP. Did this approach in the note not work?
One more point...I'm not sure which ICF objects you manually added but in general you would just transport the SE80 objects. Once the SE80 objects are QA you would then re-do the SOAMANAGER (service & endpoint) configuration, this would then add the ICF nodes automatically.
Regards, Trevor

Upload new phrases in the system

Hi,
We are currently upgrading from 46c to ECC604. In 46C we use a very small functionality of the dangerous goods master. Just some info for entering UN numbers, hazardous substances and user defined texts (5x). We have our own forms and print some fields from this masterrecord.
According to SAP we have run DGCONVERT to convert the texts into phrases.
- UN numbers in 46C was customizing and now they are maintained in phrases. Every key gets CUST-xxxxxxxxxx numbers, but the link with the UN number and the description of the UN number is not 1:1 anymore. You could enter an other description for the same UN number. So UN numbers is not customizing anymore, just masterdata in DGP2. Is that correct? Or can I make a direct link to the description?
- Because running the conversion report, every text (hazardous substances and user defined texts) are moved to phrases with CUST-xxxxxxxxxxx key. For us a problem because for us that key does not say anything, so probably we need to create new phrases. I have seen that there is CG3Y and CG3Z for uploading/downloading, but it expects /usr/sap/EHS_DATA/stocker/substanc.dat file for downloading. So is there an other way to upload our own phrases? so we can do a data migration from 46c to 604 without using the conversion report.
- In the tab 'printed text' of DGP2, you see the description of user defined text (UsDefTxt 1). Is there a way to change this description as this was possible in 46C.
- Is it possible not to use CUST- in for the phrases?
Any info would be appreciated! Thanks!

Hi, I set my question as answered as most of my questions have been answered or we have done some things differently. I just saw an other posting directing to this one so I sum up a little what we have done.
Please take in mind that we have the EH&S module but only use a small portion of the dangerous goods master (DGP2) as in only being able to put some info in the dangerous goods master, into the delivery documents. As I experienced from all the other sites this will be a bigger issue, but for the moment this is from the upgrade part:
1) Start first with setting the enhancement switch EA-PLM in customizing, else it will not work properly. See note 1157472 as in our case the menu structure was not visible in SAP menu.
2) Starting point (for us) has been note 692664. This report describes the steps you have to make to convert your texts with reports DGCONVERT used in the dangerous goods master (like texts maintained in DGTU and DGTD , specific and user defined texts). Read carefully as it seems that you must not run DGCONVERT for the same checkbox so do this step-by-step.
3) The UN number is not customizing anymore, you would have read it in note 1157472 already. This leads to converting. But the result is that you get stupid phrases (CUST-10000000012312). As the direct link to UN number and the description has been broken, we have finally created new phrases in the format like CUST-UN1133, so that the users at least know which description is the correct one.
4) For running the DGCONVERT you maybe endup in strange errors. The main cause was that the customizing and the texts must be maintained in the old system at least with AN translation in the language you run the report. Like the tables TDG33 (with text table TDG34) and TDG66 (with text table TDG67), we did not maintain every key in a language. So no empty values allowed. When one of them is empty in that translation, program stops. So we already prepared this in the old system. This also applies for the user defined text and standard text. At least the text translation must exist (and text maintained with at least an empty line) in one language. So if you have 100 texts maintained in DE and 2 are empty, we added the 2 in the system and run the program in DE language. That should work. Hope it's clear. Else ask an abapper, that's why I know this.
5) UN number / phrases / translation. In our case we do not get content (I do not know how this works and how and why). So our content is the old SAP version. Basically we did the DGCONVERT, then found out UN number was not nice, so downloaded TDG66/67.
- First we created LSMW to create the phrases in CG11. Ask your abaper to create one where you can maintain multiple languages.
- Next we linked the phrases to the correct phrase set in LSWM with CG12 to phrase set PHRASE_SET_UN_IDENTIFIER.
- Then we did an change DGP2 LSMW. Please be aware: slow!!! As we have couple of thousands materials we have to link to the new UN phrases, the performance is slow --> 20 hrs for us. (4400 materials).
6) Basically we did the same for our user defined texts. Only SAP converts them not in the correct fields, also the user defined texts are in 1 phrase set available (SAP_EHS_1022_042_TEXT). We have 5 user defined fields, and to be able to print correctly we have created 5 new phrase sets SAP_EHS_1022_042_TEXT_1 until SAP_EHS_1022_042_TEXT_5. Put the correct values in the phrase sets and then did a fresh change of masterdata DGP2 into the correct fields. In CGAB transaction you can change the phrase set to a new one (see note 632534 and look at the part: important information). In our case we linked in DGTM2:
PDGF5     User-Defined Text Key 5     SAP_EHS_1022_042_TEXT_5
PDGF4     User-Defined Text Key 4     SAP_EHS_1022_042_TEXT_4
PDGF3     User-Defined Text Key 3     SAP_EHS_1022_042_TEXT_3
PDGF2     User-Defined Text Key 2     SAP_EHS_1022_042_TEXT_2
PDGF1     User-Defined Text Key 1     SAP_EHS_1022_042_TEXT_1
7) As the conversion from 46C to 6.04 with DGCONVERT also created phrase sets for UN we actually did not want, it seems that the big amount of phrases in the phrase set is therefore slow, see point 5. So we deleted these, but also take into mind, with LSMW delete a phrase is also slow. So we think of the option not to convert this with DGCONVERT so we just do a fresh upload and link. Maybe this is faster. Currently busy with this.
8) During testing creating phrases, if you delete a phrase and create a new one with the same name SAP will give message. Run program RC1PHDEL to actual delete this from the database. See also note 1043546.
After this, we finally have everything back as we wanted and now we are able to print the data (with new selections on phrases) on our forms.
Hope this helps
Edited by: K. Peters on Apr 2, 2010 3:30 PM

Adding New SAP System in System Configuration

Similar Messages

Maybe you are looking for