Adding new selection field into a standard collective search help

Hi All,
I have a standard search help KRED attached to vendor field in FK03 transaction.
My requirement is to add one more field in the selection criteria in the 'Vendor (PO Box) tab.
Thanks,
Jyoti

I'd create a new custom elementary search help and add to KRED.

Similar Messages

Adding elementry search help to SAP standard Collective Search help

Hi,
I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and activated to it.
it got activated sucessfully.
Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A.
How can i do that?
can i add it directly to MAT1_A (sell --->search help <MAT1_A> changes --> in included search helpss tab using + (insert icon) )
Thanks & regards

I solved my problem :
I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and copied Database View M_MAT1M to ZZ_M_MAT1M and addedd same fields and activated both.
both got activated sucessfully.
Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A and this Z-search help shd appear on the first tab.
so I just went to collective search help MAT1_A in change mode --> click on "+" icon addedd my ZZ__ search help, save and activated it.
If you dont really care in which tab your search help shd appear, then the best option is to use Append Search help.
Note : if you are directly adding your search help in collective standard search help, then its better to remove hotkey form your custom elementry search help, as, if not remove will lead to warnings or make sure that you have unique hotkey in that collective search help.

How to enhance standard collective Search Help VMVM

Hey Expert,
Any pointer to enhance the standard search help VMVM with custom search option will be highly appriciated.
Thanks in advance,
Sayak

Hey Expert,
Any pointer to enhance the standard search help VMVM with custom search option will be highly appriciated.
Thanks in advance,
Sayak

Adding a field to existing collective search help

we tried to add a custom field to already existing collective search help
for this we tried to copy the search help exit "F4IF_SHLP_EXIT_VENDOR_EXP",
but we are unable to activate the copied function module since it's throwing a error that
a statement in one of the includes that was created by the system is inactive.
Thanks in advance,
Raj

Hi Venkata,
Datasource Enhacement:
Please check : [Enhancing LO DataSource u2013 Step by Step|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46]
after adding new field to datasource, need to populate using ABAP code in User Exit.
Adjust update and transfer rules of 0Customer and load data.
how can I add that field in 0SD_C03 cube.
--> In 0Customer infoobject, make Sales District as Navigational attribute and also activate as navigational in CUBE: 0SD_C03. Then it will be available for reporting for navigation, filtering.
Hope it Helps
Srini

How to include elementry search help into predefined collective search help

Hi guys...
how to include the user defined elementry search help into pre-defined collective search help.. pls reply as soon as possible..its urgent..
regards
kirankpasupuleti

Hi Kiran,
I have a complete doc on this which gives you step by step procedure to achieve the same.
If you want I can send you the docs.
Please give me your email id.
Regards,
Amit Mishra

Collective search help in SRM 7.0

Hello all,
Does any body has an idea why the custom elementary search helps wont get displayed in SRM7.0 When we add for a collective search help.
For ex.. BBP_BUPA* SOURCE_OF SUPPLY is the standard collective search help where we added custom search helps to it,
While upgrading we try to implement the same in 7.0 also, But theya re not at all visible in the Drop down of Preferred supplier.
I tried to check web dynpro componenet WDR_F4_COLLECTIVE method in debug mode but was unable to trace it out,
Can any body help me how can i include them to standard collective search helps in web dynpro.
Thanks and Regards
geetha

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Add new selection fields and ALV output fields in VA05

Hi,
I want to add two new selection fields in VA05 'Further selection criteria' screen, also want to add some more fields in VA05 ALV output.
Please help me how i can do it using user exit ?
Thanks ,
Archana

hi,
You have to copy the standard program SAPMV75A to ZSAPMV75A, change them accordingly.

Maintaining operating concern after adding new value field

Hello,
I added a new value field to our live operating concern,maintained the data structure throguh KEA0(Maintain operating concern).The changes are transported from Development to Quality,Changes were reflected in Q system.After testing in Q system transports were pushed to production system.The new value field is added to the operating concern. When i check the log for KEA0 in production system it displayed one message like:
Field VV088 was added to the reference structure
Message no. KE782.You probably either changed the operating concern or SAP-EIS aspect, and added the field VV099 to the definition.
The added a CO-PA value field:
In this case, the field is added to the definition or the summarization levels. This invalidates all existing levels. Consequently, you need to activate them again and fill them with data.
In production system maintaining operating concenr or KEAO is only in display mode.Is it needed to regenerate the operating concern once again in production, how to do it. Is the message talking about the KEDV summarization levels.?
thanks
rahul

Hi,
No no ....KEDV is nothing to do here....that is creation of summarization in CO-PA.
Since you added new value field you necessarily have to Regenerate the operating concern...
Use Tcode KEA0...go to Environment tab...there the status of Cross client part and client specific part both will be in RED....now just click on the Cross client (candle button)...now the system would regenerate the operating concern...once it is over do the same for the client specific...
Beware when you do regenerate the operating concern no body can enter any transaction in that server since it is cross client table ...hence better do it after business hours.
Hope this helps!
Running KEDU with rebuild is relevant only when you already have created summarization and called up the same in the CO-PA report "options" tab. If you did not created the summarization you are nothing to do with KEDU.
Next: The new value field has to be transported to PRD and hence even in PRD we have to do the regeneration manually.
Regards,
Velumani
Message was edited by: Velumani Arunachalam
Message was edited by: Velumani Arunachalam

Impact of adding new value fields in ongoing operating concern.

Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669

HI,
please search in SCN forum before you post:
Re: Adding a ValueField to an existing Operating Concern?
Best regards, Christian

I added a custom field into my form in BC but it wont render.

I added a custom field into my form on BC but I cannot get it to show up whhen I preview it. Does anyone know why this is happening?

Check out this http://ellenmemorialhcc.businesscatalyst.com/contact-us.html In this site I am just trying to add a 4 checkboxes. I have tried previewing it and everything and it will not make the changes. How do i get these checkboxes to show up on my site. I found where in business catalyst to access them and I enabled those features in BC but i cannot figure out how to get this to show up live on my business catalyst site.

Modify MB25 and add a new selection field

Hello All,
I need to copy MB25 to ZMB25 and add field to the selection screen and modify the select statement further. MB25 uses a LDB and I am never used LDB. Please help me how to do this and post some notes on LDB as I have lot of questions.
<b>FYI:</b> I made a Z copy of the program and in the program attributes, I see a LDB. I made a Z copy of the LDB and added a selection field. I donno if that is the right way or not. I am also not sure where to modify the selection based on the newly added selection field.
Thanks in advance
Chandni Reddy

from SAP help :
If you define the selection criterion for a column of a database table that supports dynamic selections, the values entered on the selection screen are transferred to the logical database. There, they are treated as dynamic selections. The logical database does not read records from the database table that do not meet these selection criteria. This kind of selection is much more efficient than for database tables that are not designated for dynamic selections.
Besides, the input fields for the corresponding dynamic selection are displayed on the selection screen from the start. This spares the user from having to choose Dynamic Selections to display the corresponding screen.

ME59N new selection field

Hi,
I have a requirement to add new selection field in ME59N. Is there a way to code it via BADI or user exit? The BADI ME_PROCESS_PO_CUST only allows me to change the attributes of screen fields but not add a new one.
Any suggestions would be appreciated. Thanks.

Hi Jeremy,
the only way to go is to follow what is described here...
Re: Hos to make a filed to be required field when creating datasource
Hope it helps!
Bye,
Roberto
...please, don't forget to reward the answers and to close your old no more useful threads...

Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

Hello,
this topic is still a problem for me, does anybody have an idea.
Just to show what's my problem:
Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
That works, the SH's are not shown anymore.
I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
All this can be done modification free by appends.
The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
But I have not found any way to do this modification free.
The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
But I want avoid this modification.
So, is there any way to do this without modifing any of the original SAP SH's ?
Helmut Fischer

How to add costume fields search help in BUPA collective Search Help

Hi,
I need to add a new Tab in BUPA search help in transaction BPO business partner search help i need costume fields in the new search help tab, that costume fields are already added in the business partner table BUTOOO.
Thanks,
Harinath.

Hi,
Find the name of the search help to whcih you want to add tab.You can do this by using F1 and technical setting key.After finding the name go to that search help and add your newly created search help to the existing one.After adding to the existing searchhelp write code in search help exit.

FM : to call collective Search help and update two fields in SSCR

Hi Experts,
     I have problem while using collective serach help.
    My scenario is using Collective Search help thru that i want to update 2 fields in my selection screen.
Thru this function module F4IF_INT_TABLE_VALUE_REQUEST i can mapping and update two fields using DYNP_VALUE_UPDATE but using this function module i can't able to call my Collective Search help
in other way
Thru F4IF_FIELD_VALUE_REQUEST i can able to call the collective search help but _i can't mapping field and can't updated the
selection screen field_
Is any otherway to do it, Please help me ASAP.
Regards,
Florian.

Hi Friends,
I have the similar kind of requirement. Upon click on a Button on screen i need to call a search help, and collect one or more selected material numbers.
The search help is working fine and i am getting the entries with the following code.
The problem is i am finding extra popup on screen.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname         = space
fieldname       = space
SEARCHHELP      = 'MAT1'
MULTIPLE_CHOICE = 'X'
STEPL           = 0
value           = 'MATNR'
*dynpprog        = progname
*dynpnr          = dynnum
*dynprofield     = 'CARRIER'
CALLBACK_PROGRAM          = 'ZTEST_1_PRA'
CALLBACK_FORM             = 'F4CALLBACK'
TABLES
RETURN_TAB                = RETURN_TAB
EXCEPTIONS
FIELD_NOT_FOUND           = 1
NO_HELP_FOR_FIELD         = 2
INCONSISTENT_HELP         = 3
NO_VALUES_FOUND           = 4
OTHERS                    = 5.

Adding new selection field into a standard collective search help

Similar Messages

Maybe you are looking for