Adding new text audio for receiving messages

Does anyone know if/how to add new sounds, or even songs for receiving text messages on original iPhone

Not possible I'm afraid.

Similar Messages

The Mq Adapter Is Not Working For Receiving Messages

Hi,
I have a problem making a receiving messages from the MQ Series, I configured MQ adapters for receiving message from a IBM MQ in a bpel flow, there's messages on the queue but the bpel is not getting any message. We use the same sample on the oracle page
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_mq.htm#BGEJGCBB
This is the opmn log for more details,
<2008-06-03 16:58:29,580> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Staring Poller
<2008-06-03 16:58:29,580> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Getting CCIConnection.
<2008-06-03 16:58:29,580> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [ConnectionFactoryImpl] Creating Connection.
<2008-06-03 16:58:29,581> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [ManagedConnectionFactoryImpl] Matching ManagedConnection...
<2008-06-03 16:58:29,581> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [ManagedConnectionFactoryImpl] Found ManagedConnectionFactory instance.
<2008-06-03 16:58:29,581> <INFO> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [ManagedConnectionFactoryImpl] Found MatchedConnection.
<2008-06-03 16:58:29,581> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [ManagedConnectionImpl] Creating Connection.
<2008-06-03 16:58:29,582> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> Constructor.
<2008-06-03 16:58:29,582> <INFO> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [ManagedConnectionImpl] Created Connection.
<2008-06-03 16:58:29,582> <INFO> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [ConnectionFactoryImpl] Created Connection.
<2008-06-03 16:58:29,582> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Got CCIConnection.
<2008-06-03 16:58:29,582> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Getting Connection to Queue :PRUEBA1
<2008-06-03 16:58:29,583> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,583> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Got Connection to Queue :PRUEBA1
<2008-06-03 16:58:29,584> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,585> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,586> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Queue depth=1
<2008-06-03 16:58:29,587> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,588> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,589> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Creating shell MQMessage.
<2008-06-03 16:58:29,589> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Returning shell MQMessage.
<2008-06-03 16:58:29,589> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Getting message
<2008-06-03 16:58:29,590> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,592> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Got message
<2008-06-03 16:58:29,592> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Got the message.
<2008-06-03 16:58:29,592> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] MessageId :414D51204449474930362E542E514D2015584448201B6802
<2008-06-03 16:58:29,593> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] CorrelationId :414D51204449474930362E542E514D2015584448201B6803
<2008-06-03 16:58:29,593> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] GroupId :000000000000000000000000000000000000000000000000
<2008-06-03 16:58:29,593> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Creating new MQMessageInfo.
<2008-06-03 16:58:29,593> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Created new MQMessageInfo.
<2008-06-03 16:58:29,593> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Enqueing MQMessageInfo for processing.
<2008-06-03 16:58:29,594> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQMessageToProcess] Ignoring MQMessage(mid) : 414D51204449474930362E542E514D2015584448201B6802 gid :000000000000000000000000000000000000000000000000 as this MessageId is already enqued for processing.
<2008-06-03 16:58:29,594> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Enqueued MQMessageInfo successfully.
<2008-06-03 16:58:29,594> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Staring Poller
<2008-06-03 16:58:29,595> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Getting Connection to Queue :PRUEBA1
<2008-06-03 16:58:29,595> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,595> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Got Connection to Queue :PRUEBA1
<2008-06-03 16:58:29,596> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,597> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,598> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Queue depth=1
<2008-06-03 16:58:29,599> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,600> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
<2008-06-03 16:58:29,601> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Creating shell MQMessage.
<2008-06-03 16:58:29,601> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Returning shell MQMessage.
<2008-06-03 16:58:29,601> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Getting message
<2008-06-03 16:58:29,602> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] using alive queue:PRUEBA1
MQJE001: Completion Code 2, Reason 2033
<2008-06-03 16:58:29,604> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] setting queue pointer to start...
<2008-06-03 16:58:29,604> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Closing CCIConnection.
<2008-06-03 16:58:29,605> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [ManagedConnectionImpl] Cleaning ManagedConnection.
<2008-06-03 16:58:29,605> <INFO> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [ManagedConnectionImpl] Cleanedup ManagedConnection.
<2008-06-03 16:58:29,605> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Closed CCIConnection.
<2008-06-03 16:58:29,605> <DEBUG> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound> [MQPollerThread] Sleeping Poller for 3000 msec.
Regards,
Ivan Loaiza.

Hi James,
The message id and the correlation id are diferent in this case. This is not the problem. You can see tha last number is diferent
MessageId :414D51204449474930362E542E514D2015584448201B6802
CorrelationId :414D51204449474930362E542E514D2015584448201B6803
Regards,
Ivan Loaiza

How can I get new text tones for my iPhone 3GS?

I would like some new text tones for my iPhone 3GS...

You can't unless iOS5 includes this function, but even then it might just be for iPhone 4.

How to create new text symbols for the standard program.

Based on the customer's requirement, I need to create a new implicit enhancement for the selection screen.
I want to create new text symbols for the parameters and blocks, but I cannot change the standard ones.
Does anybody know something about that? Thank you.

hi ming yu,
example : %_MATNR_%_APP_%-TEXT -> this is the material description name in mb5b
change the description in ur enhancement implementation
%_MATNR_%_APP_%-TEXT = 'Material'
it is works only input/output field
Thanks&Regards,
naveen

Adding new hard drive for Flash recovery area

i am adding new hard drive for flash recovery area. How i can make single directory on that flash recovery area & how i can test that i am accessing that rightly , to that directory & flash back recovery area disk?

Are you on Windows or Unix? And are you using ASM?
I'll assume you are on Windows....So after allocating the drive, you will format it say as F drive. Then you can create a directory T:\Flash. The parameter determining the location of the flash recovery area is db_recovery_file_dest. But you also need to set the size of the flash recovery area as well. After that's done. You can do your backups to Flash and see if the directory is populated.

Adding New Text Comment in Traditional Chinese shows Error

When adding New Text Comment in Traditional Chinese , it pops up a window with "Error, but instal the latest version of Traditional Chinese Language Support Package may fix the error", but I have installed the latest one (Adobe Acrobat Reader DC 2015.007,20033), how to fix this error?
System: Mac OS X 10.10.3

But do you have the language pack installed?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5884
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5878
Sorry, I don't know which is the right one.

Lumia 900 - Visual indicator for received messages...

What settings do I have to modify to have a visual indicator that I have received an email or call?
If you've been away, when you come back, how do you see there is a missed call or message?
It flashes when it comes in but goes back to black in a few seconds.

Ok, so I see there is not any LED that could be used as an indicator for received messages or calls. Shame.
Thinking about this mayor fraud, you lost it Nokia, and trying to be creative I think we could do something to ammend the issue.
Could someone write an app that smoothly fade in and out the Windows logo at the botton of the device?
I will need to look into Microsoft's sdk and see what they allow to do, perhaps I could write such an app.
If there are more developers out there that could look into this that will be great.

[svn:bz-trunk] 21327: Updated the sample destination config to show the new "none" value for cluster-message-routing

Revision: 21327
Revision: 21327
Author:   [email protected]
Date:     2011-06-02 08:51:22 -0700 (Thu, 02 Jun 2011)
Log Message:
Updated the sample destination config to show the new "none" value for cluster-message-routing
Modified Paths:
    blazeds/trunk/resources/config/messaging-config.xml

Thanks Carlo for your reply.
I have read again the link and you are correct that in using the preferred command together with localhost under POTS dial-peer, I can now select which correct path to choose for my outbound calls. I'm just not very strong with dial-peer and translation rules at the moment.
I will try this solution during the weekend and let you know. But it would have been better if there was a sample configuration for this option.

Update (0 new / 0 changed) Warning received Message Missing Update Finished

The FULL load is running for long time and after some time it fails with processing Overdue. ( It is loading directly into datatargets no PSA as this is Daily FULL load to cube, deleting the previous request) The job overview is successfully finished in source system.
While load running in details tab under processing..
1)Data Package 6 ( 7407 Records ) : Missing messages -->
2)Update ( 0 new / 0 changed ) : Warning received
3)Message Missing: Update Finished for Cube
4)Processing end : Missing messages .
When clicked on helpnode on each step:-
1)Data Package
A data packet is either sent with transfer method IDoc or PSA to BI. You have the option here of viewing the data received and of editing it where necessary, of posting the data packet in simulation, and of canceling in simulation, and, if it has not yet been posted successfully, of starting the update manually.
2)Update
See also Data packet processing steps
By this the persistent saving of data is understood in its final target object
3)Processing Message
see also Data Packet Processing Steps
Single message from the processing of a data packet. Some messages contain references to application logs or other requests. The monitor then allows corresponding jumps.
4)Processing End
see also Data packet processing steps
If the processing of a data packet has been finished then any error messages for each process in the step up until this point are delivered to the monitor and to the called program (in the case of transferring by IDoc thus to the IDoc management). If no errors arose then a success message is logged per process.
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.

Hi
Try to transport the request again and check...
Perform the consistency test with 'RSRV'...
Check notes in this link if they could help u....UNCAUGHT_EXCEPTION
Regards
Gaurav

Adding new text in SHC HTML template with different colour

Hi Gurus,
We are using SRM5.0 Server 550 and SP14 and classic scenario.
Is it possible to change the colour of a newly added text in Shopping cart HTML template?
I mean we have a requirement to add a new text in HTML template of shopping cart and with a different colour so that it woulod be highlighted whenever users try to shop something.
Can anyone let me know the pros and cons of such a thing, if later on they upgrade to SRM7.0 and its feasibility?
Regards,
Teja

Hi,
You can enhance/modify the HTML template.
SRM 7.0 does not use ITS HTML template. So SRM 5.0 is the last version using ITS HTML template and no impact for upgrading to SRM 7.0.
Regards,
Masa

Adding new text and removing existing one in standard oaf page

Hi,
I got requirement like this in iRecruitment login page .in that i need to modify raw text like New to iRecruitment?in this i have to place client text.
can u help me?
Thanks,
ajay

Ajay,
If message which needs to be changed is attached to AOL message then try the below
1.modify the message according to your requirement
2. clear fucntional cache to reflect the change in login page
Navigation to clear cache: Functional Administrator Responsibility -> Core Services -> Caching Framework -> Global Configuration -> Click on “Clear All Cache” button then click “Yes” button
How to find out which message is attached with that login page.Is there any way to find out that in about this page or personalization or any other method.If your login page is OAF page then you can check it using about this page. Go to 'about this page' link select "Expand All" radio button then search for your message.
regards,
Anand

Usage of WndProc for receiving message from skype c#

i am trying hard to capture & save skype conversation to file. i go through this tutorial
http://galratner.com/blogs/net/archive/2011/08/27/how-to-record-skype-voice-conversations.aspx also download wpf based
the source code which i run and got the success.
i follow the everything but my application is not working. the main problem is regarding receiving message from skype through
WndProc() function. my WndProc() function is calling only once but the application which i download there i saw their
WndProc() function is calling repeatedly for getting message from skype. i am trying for long time to capture the skype conversation but still no luck.
i already post few questions for capturing the skype conversation in this forum but not getting no expected clue. here i attach the link of my win application and that is
https://onedrive.live.com/#cid=C4A6F16F34D7540A&id=C4A6F16F34D7540A!126 just download the skypecalltest and run it and definitely notice that
WndProc() function is calling repeatedly for getting message from skype.
here is my WndProc() body
protected override void WndProc(ref Message m)
Boolean handled = false;
if (m.Msg == NativeCalls.APIAttach && (uint)m.LParam == NativeCalls.SKYPECONTROLAPI_ATTACH_SUCCESS)
// Get the current handle to the Skype window
NativeCalls.HWND_BROADCAST = m.WParam;
handled = true;
m.Result = new IntPtr(1);
// Skype sends our program messages using WM_COPYDATA. the data is in lParam
if (m.Msg == NativeCalls.WM_COPYDATA && m.WParam == NativeCalls.HWND_BROADCAST)
COPYDATASTRUCT data = (COPYDATASTRUCT) Marshal.PtrToStructure(m.LParam, typeof(COPYDATASTRUCT));
StatusTextBox.Items.Add(data.lpData + Environment.NewLine);
// Check for connection
//if (data.lpData.IndexOf("CONNSTATUS ONLINE") > -1)
// ConnectButton.IsEnabled = false;
// Check for calls
IsCallInProgress(data.lpData);
handled = true;
m.Result = new IntPtr(1);
m.Result = IntPtr.Zero;
if (handled) DefWndProc(ref m); else base.WndProc(ref m);
please please help me to capture the problem and guide me where i need to rectify as a result
WndProc() should work as expected. thanks

Hi Mou_Kolkata,
Since you are trying to get Skype conversation which used Skype API, it is out for support from C# forum and you have to post on below forum:
http://community.skype.com/t5/English/ct-p/English?profile.language=en
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SAVE_TEXT problem in adding new text identifier to an existing text object

I have an existing text object "ZEANR" which stores 9 long text data with identifiers 1 to 9. I want to add a new long text to that text object with id 10. when I use SAVE_TEXT function (with same parameters as others except the ID is set to "0010"), it throws an exception saying : "0010" text identifier is not defined for Text object "ZEANR". How can we append more long texts to an existing object ? I Have tried to change the insert parameter of the SAVE_TEXT function but it didn't work with both cases. I am getting the exception at perform chech_key --> perform check_id of the SAVE_TEXT function.
if someone knows the answer I will be preciated. thanks in advance.

The text ID specified in the parameter ID or text header (field TDID) should exist in table TTXID. It must be defined there with the text module object.
Go to transaction SE75, select "Text Objects and IDs", Change. Find your text object (ZEANR) in the list and double click. Choose create. Add a new text id (0010) and description. Save.

Configure plain http adapter for receiving message from an external system

Hi,
we use Pi/700.
Now I have an external system and I have to use HTTP (plain) to send messages to XI (via plain http adapter).
I have no experiences with HTTP!
In the external system I can only configure "URL, Username, Password" for sending messages - that's all!
What do I have to configure in XI (communication channel, abap-stack, java-stack,...)?
I don't know the URL of my XI-system. Is there an transaction code to get this information?
Why do I need a Username/Pasword?
For testing I can use a "http-post test tool" I found here in this forum.
Thank you all for any help!
Regards
Wolfgang

Hi Hummel,
In Exteranl System u have to use these values
name="myhost"      value="xiserver"
name="myport"      value="8000"
name="mysystem"    value="XY_BSservice"
name="myinterface" value="Order_out"
name="mynamespace" value="urn:xi:hcl:powebapp"
name="myqos"       value="BE"
name="myclient"    value="300"
name="myuser"      value="XYZCLNT"
name="mypass"      value="xiuser"
Here My system is the Business service created in Integration directory of XI, Interface is the one created in Integration Repository (This is Outbaound from external sys to XI)
In XI U have to create
Data Types : 1) Source Structure data type(from extenal sys)
             2) Target structure (where u want to send from XI)
Message Types : 2 with above DT's
Message Interface: 1) Outbound, Async (Order_out)
                   2) Inbound , Async (for the target sys)
Then Message mapping and Interface mapping as usual..
And in ID u have to create 2 services one is XY_BSservice for sending system and the other is for receiving system...
For sending system no communication channel required...
Hope u will get idea from the above..
Need any further u r welcome..
Regards
Sridhar

Adding new texts in sales order item text

Hi , we have a requirement where we need to add new texts in the sales order item texts. Ne pointers on how to do it will be appreciated.

Hi,
You can Use FM: SAVE_TEXT.
Here the sample code:
      refresh: wlines, wheads.
      clear: wlines, wheads.
      wheads-tdname = it_text-tdname_so2.
      wheads-tdobject = p_object .
      wheads-tdid = p_id .
      wheads-tdspras = 'E'.
      append wheads.
      wlines[] = it_tline[].
      call function 'SAVE_TEXT'
           exporting
             client = sy-mandt
             header = wheads
             savemode_direct = 'X'
           tables
             lines = wlines.
      commit work.
Regards,

Adding new text audio for receiving messages

Similar Messages

Maybe you are looking for