Adding numeric scale on CWGraph3D control

I am using Measurement Studio for Visual C++. I have 2 questions;
1. How do you add the numeric scale on CWGraph3D control? The color map style of the CWGraph3D control is set to color spectrum.
2. How do you rotate the CWGraph3D control? I want to line it up horizontally.
Thanks !

Hi Irene,
1. Are you referring to a x, y or z scale? You can add these both in property pages and programatically. Configure them by right-clicking on the graph and selecting Properties. On the Axes tab you can configure each of the axes. If you're referring to a scale telling what numeric values are associated with which colors then this is not something you can add automatically. You can however get the information that would be needed to create your own scale. The following post discusses this in some detail and gives an example in LabVIEW. You can use the ColorMapColors and ColorMapValues properties to obtain this information.
_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0​=3d+intensity&USEARCHCONTEXT_QUESTION_S=0> Is it p...
2. You can rotate the graph from the property pages as well. Open the property pages and select the Graph tab and then the 3D tab. This tab allows you to rotate the 3D graph. You can also configure this programmatically.
I hope this helps!!
Regards,
Sarah Miracle
National Instruments

Similar Messages

  • Custom the CWgraph3D Control

    Hello,
    Curretly I met
    another challenge about the CWgraph3D control. I want to show a
    background image on a fixed ranges/axes area of the CWgraph3D control
    in the XY view (or any of the other two projection, does not matter).
    What I mean is, I have my CWgraph3D control set for the XY (2D) view,
    and for example, the range of x and y are both 0 - 10 (fixed). I want
    to show a back ground image of the control so that when I plot things
    on the control, I will see what I plotted + the background image. I
    cannot find a way to do it, can anyone give me a hand? Thanks.

    Hi,
    Here is an example of what I am doing: Say,  I have a sphere object sitting in the origin of the 3D Control and I am looking at it from the XY view (see the attached pic01).  The X and Y axis is fixed (say, for example, both range from -10 to 10 crossing the sphere).  The black line is there as a refernce.  The task is to use a blade to cut the sphere along the reference black line.  Assume I have a way to detect the movement of the blade so that I can show it in the 3D Control, my problem is how to show the sphere and the black line (which is the pic01 image) so that I know if I am at the right angle to cut my object.   If it is complicated to custom the 3D control to show the image, is there a way that I can overlay an image on top of the 3D control and set its transparency to a level that I can see both the image and the plots in the 3D control?
    BTW, the object to be cut is more complicated so that I want to just put the image in the 3D control.
    Again, thanks all for your helps. 
    Attachments:
    pic01.jpg ‏19 KB
    pic02.jpg ‏21 KB
    pic03.jpg ‏20 KB

  • When clicking on "new sheet" in numbers on my MacBook Pro all I get is a blank sheet. I have added numerous sheets successfully prior to this. How to I get new sheets to appear again?

    When clicking on "new sheet" in an existing file on numbers all I get is a blank screen. I have added numerous sheets prior to this successfully. What changed and how do I change it back?

    Hi GSP,
    I can't reproduce your problem.
    Does the spreadsheet behave normally otherwise? What happens if you try to add a table to that blank sheet?
    quinn

  • Adding Field in standard Table control in crmd_order (standard order)

    Hello All,
            I want to add a Field in standard table control in Crmd_order - standard order general tab. Please Let me know it is Possible to add, if Possible Let me know how to achieve this Functionality.
    Thanks,
    Feroz.

    hi,
    If you don't want to access key...then only option is ,you have to search USER Exit or BADi (Try using BADI ME_GUI_PO_CUST) for me22n transaction......to adding the field.
    Regards
    Gaurav

  • Reg: Adding field names in table control

    Hi
    I am new to table control ,instead of going with table control wizard i am proceeding with table control.
    I have added all the fields as per my requirement, i have added like matnr ,maktx. above these fields i would like to add material and material description..
    can any one suggest me a way to add those fileds.
    And my requirement is i need to display my contents in the internal table..
    if any got sample coding plz do send me.
    Thanks and regards
    Arun Joseph

    Hi Arun joseph,
      In SE51 -> Layout, Press Input/Output button and put it at the end of all your columns in your table control and give variable name ( for example fs_tablecontrol-extrafield ) and press Text Field button and put it in the place of heading give text and save it activate it.
    In your program add the field in data declaration and do furthor logic for that extra field/fields.
    Note: you can add the both fields like this only.
    Regards,
    Mahi.

  • Numeric cell in Tree control ?

    Hi y'all !
    I'd like to have numeric input cells in my TREE CONTROL. I can see the types string, ring, combo box, etc. ... but NUMERIC is not included.
    I'm using CVI 2012.
    Is there an alternative or does anyone know at least why it is not supported ?
    Thanks!

    Hi carolynturnell,
    Indeed cell types included in a tree control are String,Ring, ComboBox, CheckBox, ColorPicker and HorizontalBar.
    Tree controls are used to view a hierarchical list of items.
    Why do you want to display Numeric/use tree control ?
    Valentin
    Certified TestStand Architect
    Certified LabVIEW Developer
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Travaux Pratiques d'initiation à LabVIEW et à la mesure
    Du 2 au 23 octobre, partout en France

  • Numeric scale and precision

    Does anyone know if Oracle has any plans to make the scale and precision mandantory on numeric fields?
    My group has built an ODS of Oracle Financials data. The source has fields defined as numeric, but in our ODS we choose to have them defined as numeric(30,8). One of the table loads abended last night and I am thinking of changing those fields to numeric to avoid future abends, but I want to make sure that down the line I won't be changing them back....
    Thanks,
    Ann

    I can't imagine Oracle would break the piles of existing code that declares plain NUMBER columns. I doubt you're going to find anything official from Oracle that it plans to continue allowing you to omit scale and precision for the same reason that you won't find anything saying that it plans to continue supporting BEFORE INSERT triggers.
    If, for some reason, Oracle started requiring scale & precision, they'd give you a number of years to make the change. Heck, they started saying "LONGs are going away" when 8.1.5 came out but still supports them for legacy apps in 10.1.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Adding Database in OEM Grid Control 11g

    Dear All,
    I have install silently oem agent 11g in a solaris system. The installation was successful and agent is up and running.
    But the thing is I can't add this client and its database in my OEM Grid Control interface. When I try to add the target it shows the bellow error
    Information
    You cannot add a host target from Enterprise Manager Grid Control.
    To add a host target, install the Oracle Management Agent on the host computer you want to manage. When the Management Agent begins communicating with the Oracle Management Service, the Management Agent target and the Host target will appear in the list of targets.
    My Question is how i can the target's agent can communicate with OMS agent? and How this target can be incorporated?

    You install management agents on the host and point the URl to the grid control OMS and it will automatically discover the host and databases
    It is in the documentation.
    Oracle Database FAQs

  • Adding custom fields in table control of infotype 0591

    Dear Experts,
    My requirement is to add custom fields x y z  in the Table contol of the standard infotype 0591 (Nominations) screen in PA30 tcode.
    Is it possible to add the fields in table control after the fields share,guardian's address, without using access key.
    if  so, help me to know the procedure.
    Please suggest.
    Warm Regards
    Sinde.

    hi..
    a thread already exists with the same Subject.. pls check if it helps u....

  • Adding New Field in table control

    Hi all,
    I am going to add one new field in existing table control ,which already contains nearly 20 fields, so my field should be21st field,
    here when I am going to add new field , I need to add the field from work are from the same program. So , I am  selecting the option Get from Program, here I am getting the error the field  does not exist in the generated version of the program.
    Regards,
    Siddivinesh Jogu

    Hi,
      I think you forgot to activate the program after creating the new field in the internalt able so first ensure the program is properly activated and then try the same.
    Regards,
    Himanshu

  • Adding custom fields in table control of PO

    Hi Everyone,
    I have a requirement which i need to display the custom fields in the Table Control(Item Overview) of PO. Since our Version is 4.6C there is no badi's avilable to do the changes. Please let me know how can we solve this problem.
    Mentors: Forgive me if it is repeated Post...
    Edited by: subas  Bose on Feb 5, 2010 12:10 AM

    Hi,
    Search for user exit...either screen or field exit..this will solve your problem.
    Small help on how to find a exit;
    1. find out the package
    2. go to se84 with the help of package in the cutom exit tab look for all the exit.
    3.put the brek point and tack where you can get the solution.
    Pooja

  • Adding dynamic columns in Table Control

    Hi All,
    Can we add dynamic columns in a table control? The requirement is something like this. When the user clicks a button it should add a column to the table. Also is it possible for the same column to refer to different fields of the Internal Table of the Database table. Example. The first row in the table control must refer to MARA-MATNR and the second row must refer to MAKT-MAKTX.
    Regards,
    Sudhindra

    Hello Sudhindra,
    If you know all the columns that the table control will ever contain, then I suppose it is possible to add and delete the columns dynamically.
    What cannot be dynamic, is the determination of which coulmn would be displayed in the table control.
    To elaborate, In SE51, you have to define the table control with all the possible columns. In the program, during the PBO, you can choose to hide some of these columns. When the user performs certain action (PAI), you can determine which opf the hidden columns would be displayed in the table control after the next PBO.
    Coming to your second requirement, I don't think it is directly possible in case of table conrols. You will have to do some manipulation to achieve it. But even if you can I think you should not. Because, It is not elegant from a good-UI design perspective. ANd during the course of the necessary manipulations, we might have to forgo some of the features like Automatic Field Validation, Automatic Input Help etc. You can use ALV for the same.
    Please be judicious in deciding which approach to consider and if you run into some more problems, please do get back with some more details like how many columns you have, how many different row-types do you want, what are the features for the fields that you wish to provide (eg. F4 help) an so on...
    Regards,
    Anand Mandalika.

  • Adding extra fields to Table Control?

    Hi Experts,
    Here I hv a table control, with 5 fields, 1,2,3,4,5.
    So, I need to add extra 3 fileds to the above said existing table control i.e.
    6th field in between the 3 & 4,
    7th field in between the 4 & 5,
    8th field in the last i.e. after 5th,
    I tried with Table Control Wizard, but not succeeded. So, pls, mention the steps to b followed to achieve this?
    ThanQ.<b></b>
    Message was edited by:
            Sridhar

    Hi,
    Go to SE51
    Give the program and screen number..
    In the menu..choose..utilities -> settings..
    Uncheck the graphical painter check box..press enter..
    Choose the layout radion button..
    Press change..
    Double click on the table control..
    THen press the CTRL Elements button..
    In the popup...insert (+ button) to place the input field
    THanks,
    Naren

  • Adding dinamic fields into table control..

    hi friends,
    i wan to knw , is it possible to add fields dynamically in table control? actually the requirement is like, it is not fixed how many fields will be their in table control, it may change depending upon date. so if u knw, please help me out....
    good points will be awarded to helpful answer.....
    Thanks,
    Brij

    HI,
    at the design time of the screen make all possible columns or fields in the table control,make sure you are having all the fileds in the itab.
    now go to the pbo of the screen.
    inside the loop endloop of table control write loop at screen .
    inside this loop for all the fields base dupon condition you dont want to appear make screen-invisible = '1'.
    modify screen.
    hope this solves your query...
    thanks
    vivekanand

  • Adding numerous keywords to an image

    My first post here, so hopefully someone can help..
    I am trying to keyword images in Elements 3. I have been going into the Elements 3 organiser, creating a tag, giving it an appropriate name and adding keywords in the "notes" box. Then dragging the tag onto the image..
    When I then check the "file info" option in the editor the only keywords listed are the ones in the tag name, the note entries are ignored. Obviously the notes box is not where you put keyword so thats fine, but my question is then where do you put the actual keywords? You can't put many words into the tag name field, so that can't be the answer..
    I would like to keyword an image with say 100 words. In the editor the "file info" box for keywords is greyed out and instructs you to use the file browser tags option.. Am I missing something obvious here?
    I am using Win XP, 2.4GHz celeron, 1.5Gb Ram.
    Thanks for reading this..
    Craig

    > So an individual tag for each individual keyword is what you are suggesting is necessary in Elements?
    Yes.
    > Maybe Photoshop CS has this functionality?
    I believe that Bridge - part of CS - does do exactly that.
    This would be logical, as CS is the "pros" tool and this is very much in a professional photographer's area of interest.
    If you don't want to spend that kind of money, you should look around for other tools to just add keywords. There are lots of possibilities - many of them free. I use Pixvue for other purposes, but I think it can do that.
    Just a word of caution: there are several ways to add keywords to image metadata; make sure you're doing what the image stock library expects.

Maybe you are looking for