Adding objects to transport request

Hi all,
I need to add a generated SAP object into a transport request.
How can i do this without making changes to the object?
Thanks.

Hi,
You need to create a Workbench TR request in SE09. Go to the detailed screen of the transport. Go to change mode. In the objects tab, you can see a table for the object details. click on the ADD button. Give the Program ID as R3TR. Object ID depends on the object type. You can find the list of values in F4. In the object name, give your object name. Select that entry and click on the LOCK button.
The object will be locked under the TR.
Reward points if helpful!
Thanks and Regards,
Lakshmi.

Similar Messages

Problems adding object to Transport request via FM TR_REQUEST_CHOICE.

Hi.
Iu2019m having some problems with a function module to a table entries to a transport request.
I want to put all table entries of a specified table (ZTRANSPORT_TEST) into a transport request by calling a function module.
Iu2019m filling the structures e071 with programId u201CR3TRu201D and ObjectType u201CTABUu201D but I get the following error:
Object R3TR, referred to by the object key, does not exist
Message no. TR600
Diagnosis
The object keys of the request/task cannot be edited because the object (R3TR) which is referenced by the object key is not in the request, nor is it going to be added to the request.
What am I doing wrong?
Here the source code:
REPORT z_test_add_to_request.
PARAMETERS: p_req TYPE trkorr. "W22K900273
DATA: it_e071 TYPE tr_objects,
 it_e071k TYPE tr_keys,
 wa_e071 TYPE e071,
 wa_e071k TYPE e071k.
* Create Object entry.
wa_e071-trkorr = p_req.
wa_e071-pgmid = 'R3TR'.
wa_e071-object = 'TABU'.
wa_e071-obj_name = 'ZTRANSPORT_TEST'.
* Create Key entry.
wa_e071k-trkorr = p_req.
wa_e071k-pgmid = 'R3TR'.
wa_e071k-object = 'TABU'.
wa_e071k-objname = 'ZTRANSPORT_TEST'.
wa_e071k-tabkey = '*'.
* Fill tables.
APPEND wa_e071 TO it_e071.
APPEND wa_e071k TO it_e071k.
* Add table entries to the transport.
CALL FUNCTION 'TR_REQUEST_CHOICE'
EXPORTING
 iv_suppress_dialog = 'X'
 iv_request_types = '*'
 iv_request = p_req
 it_e071 = it_e071
 it_e071k = it_e071k
 iv_lock_objects = ' '
 iv_with_error_log = 'X'
 iv_no_owner_check = 'X'
EXCEPTIONS
 invalid_request = 1
 invalid_request_type = 2
 user_not_owner = 3
 no_objects_appended = 4
 enqueue_error = 5
 cancelled_by_user = 6
 recursive_call = 7
 OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards Michael

Hi.
Found the problem. I missed to fill the entries:
wa_e071-objfunc = 'K'.
wa_e071k-mastertype = wa_e071-object.
wa_e071k-mastername = wa_e071-obj_name.
Regards Michael.

Adding objects in transport request

Hi sdn,
by mistake I didn't include some infoobjects in the transport request, how i can add this missing infoobjects in my transport request
rubane

Hi Kamaljeet
thx for ur reply i had included two infoobjects one comes under object list of request and another comes under request itself by using transport connect what is the difference between these two.
rubane

How to add Objects to transport request through FM/BAPI?

Hi All,
I am creating a workbench request through program. I am able to create it by using BAPI but i am unable to add objects to it through program.
Can anybody tell me the funcion module/bapi to add object to transport request?
i have the list of objects that are suppose to be added.
No BDC please.
Thanks ,
Swarup

Hi Swarup,
Check FM TRINT_MODIFY_COMM. Also look at program TH_TKANL for the usage of FM.
Thanks
Lakshman

When is the entire function group added to the transport request

When you modify a functionmodule in a function group, only the object of the functionmodule( LIMU FUNC) is added to the transport request.
When you modify an include of the function group, the reportsource of that include (LIMU REPS) is added to the transport request.
But under some circumstances the entire function group is added to the transport request (R3TR FUGR).
Can somebody clarify under what circumstances the entire Function Group is added to the transport request?

I was actually looking for the reason why I would find R3TR FUGR objects in requests for existing function groups.
What I found out is that R3TR FUGR is added to the request when :
- the function group is created
- a function is renamed
- the function group is deleted
- you choose : Write Transport Entry, in the context menu of the Function group.
The actual problem was that in our upgraded system (ERP2005) we had a transport containing the function group (R3TR FUGR) and we thought none of these actions had been taken. After talking to the developer in question, I found out he did rename a function module, so I have my solution.
But thanks everybody for the insight.
Message was edited by: Dries Horions

Collecting objects in transport request

HI Experts,
                My development is completed and now i have to collect the objects in transport request. my development is like
1) infoobjects(new infoobjects and some are available in BIP already and some infoobjects have reference infoobjects, dependent object is in production)
2)Infopackeage for Datasource
3)DSO
4) Infocube
5)multiprovider
6)queries and views
7)web templates
This is the first time I am collecting this many objects. So please give sugessions how to collect these objects in a single transport request.
Thanks and Regards,
RAJ

It is advisable to collect the objects in separate transport requests...the transport request should contain dependent objects
1) collect all the InfoObjects
2) collect all the cubes/DSO   (they need Infoobjects.. so they are dependent on 1)
3) collect datasources/Infosources (they need Infoobjects.. so they are dependent on 1)
4) collect transformation (they need 2 and 3)
5) collect DTPs and InfoPackages   (they need 3, 4)
6) collect the reports
7) collect the web templates
make sure these are transported in sequence... each on dependent on previous

Approve critical objects in transport requests (ChaRM)

Hi folks!
When trying to create transport of copies from within a Change Document (status 'to be tested') the system checks for critical objects in transport requests and prompts a warning that critical objects are to be approved.
I do not want the Change Manager to approve every transport request containing critical objects. I would more likely use this feature as information for the Developer so he is aware of working on critical objects. The Developer should be able to make the approval.
What I found out: only the user whos Business Partner is assigned to Partner Function 'Change Manager" is allowed to make the approval.
More detailed it seems to be Partner Function of type "0008 responsible person"
I tried changing Partner Function Developer from "0016 service group" to "0008 responsible person" but the system won't let me have two Partner Functions of that type in one Change Document.
Any suggestions?
Thanks in advance.
/cheers

Hi,
For any user to approve the change req or change doc, he should have the authorization
In your case Developer has to approve means
1. Create a Action definition and maintain the processing parameters for the definition, select the partner fn as Developer
2. Create the customized status in your status profile and its corresponding Authorization code also.
3. Assign the Authorization code for Developer under teh authorization object B_USERSTAT
By this Developer wil get the authorization for approving the change doc for the particular status
If solves your query then mark the thread as answered
regards
Naveen

Unlock objects from transport requests

Hi Gurus
I was doing the SAP_Basis support pack upgrade, in netweaver 7.1 and many of the objects seems to be locked in transport requests. as my understanding, i have two options only,
1. replease transport - but it can create issues to us, as that will automatically imported to the next system in teh landscape, so unwanted requests will move to QAs system
2. unlock objects from transport request.
So i did the second option, but it had a message that it can create inconsistencies in the system, do u know what all the meassures we need to take, if we unlock objects from the transport requests. Is it required to delete the transport requests,
by mistake , if someone releases the that transport, whether it will release the old object or the new object.
Please suggest what would be the best recomended approch by SAP
Bijoy Babu

Hi Bijoy,
Its better to release the TR and then delete the same from the queue before it is imported into the following system. This will avoid any inconsistancy when the TR released after the SP application.
Regards,
Varadhu

Business object for transport request creation

Hi,
I want to know the business object for transport request creation. Kindly help.
Thanks and regards,
Venkat.

I am not sure but u can try this BO CTREQUEST.

Deleting objects in transport request

Hello,
I made the changes in InfoCube in developer system and included those changes in a transport request. I didn't release this transport. Then I realized that those changes must be reverted.
I know what I have to do. First of all I need to change manually InfoCube and then remove objects from transport request.
I have doubt about deleting objects. In transport request there is a lot of object which Iu2019ve never changed such as InfoObjects and InfoArea.
Can I safely remove these objects? Why these objects are attached to my transport request?
I checked them and last change was made by another user.
Thank you for your time.

Hi,
I don't think there is any version comparison available with target system like R/3 reports. You will manually have to compare the properties.
If you have lot of objects and do not want to loose any changes then you can even think of reverse transport from production system to development system for selected objects.
Now about locking the remaining objects you can open the TR through SE09 in change mode and then select the required items and from the tool bar you can directly lock all the items in single go.
Regards,
Durgesh.

Translation of objects at transport request

hi, can any one tell how every object can be translated at transport request based on Object Type and object name is there any way to do like that, its very urgent .
thnks,
Vassu.

hi, actually the requirement is that our production system would be multi lingual in future they want to change their qs-chech process. Every transport request we transport in to their test-systems must be checked, if all translatable objects are translated.
therefore they want a report, which does this automatically.
so they want to check every object at transport request is transaltable or not?
but we have some 10,000 of objects present i our development system.How can we check all those objects?
this is the senario.
Regards,
vaasu.

CMOD Project need to move from local Object into Transport request

Hi Friends,
I created a Project(CMOD) under Local Object I need to move the Project from Local object into Transport request.
I can't able to find any option.
Please guide me ASAP.
Advanced Thanks.

On the first screen of your project, choose following menu path:
"goto => object directory entry"
press on the change icon
you can now assign a different package.

Objects did not added to the transport request

Hi team
Pls advise, I've been trying to create a transport for some workschedules in client DDD.
But although I've created a transport and saved it, when I look at the transport or task, there's no objects saved in it. For the other clients BBB, CCC, when I do the same process, I would see the table T552a in the transport task and the list of entries generated. But in client DDD, it is always blank.
Can you please tell me how to investigate this issue.
Regards
Bhaskar
Edited by: bhaskar1818 on Dec 10, 2008 10:04 AM

You can manually add the object into that transport request number. Login into client DDD and go to SE01 -- Select the request-- go to Request/Task- object list - include objects- freely select object.
The reason could be behind this that transport request has been not allowed for the client DDD, if i understand correctly the problem
Regards
Subhash

Object not added to the Transport Request

Hi,
We have a z-tcode thats a replica of SPAD for creating printers.
Once the printer is created, a prompt asks for creating a new Transport request(TR in short) and once the TR gets created, the printer finally gets attached to this TR.
This tcode works fine in 4.6 version. But not in ECC6.0 version.
In ECC6.0, the TR gets created and the printer too is created but its not attached to the TR.
I checked the codes in both the versions but could not find any difference between them.
One thing I noticed that the statement CALL transaction... within one of the sub routines(that adds the printer to the TR) has a parameter for message and it doesnot get populated with any entries,
while it does in 4.6 version.
Please suggest.
Regards,
Binay.

Hi,
In debug mode try passing the same message & check whether it works.
if yes, then you may hardcode the same.
Best regards,
Prashant

Ho to programmaticaly add objects to Transport Request

Hi Experts,
I have a requirement programmatically add objects to a Transport request.
My requirement is , to modify/delete entries from DB table in the program and to create that object under a Transport request. I could successfully add objects while creating entries to the DB table. I have some confusion when I'm to delete entries in the DB table. How am I to achieve this. Is there some delete key/flag in the transport request which indicates that the entry is for deletion in the table.? When the TR is SAP craeted, both the creation and deletion TR appears the same.
I'm using FM 'TR_REQUEST_CHOICE' to add the objects.
Thanks in advance ,
Regards,
Anjali

Thanks Neenu, My problem is not in adding objects to a TR.
Suppose I have a Config table, which I want to maintain by the use of an program. With this program I should be able to create and delete entries in the config table. Now While creation, i face no problem or confusion in adding the tasks to the Transport request. But if I'm to delete entries from the config table and maintain it in the transport request, how shall i do it? The TRs which SAP creates for addition of entries and deletion of entries appears same. I cannot spot any differnce in the tasks while creation of entries and deletion of entries from the DB table.

Adding objects to transport request

Similar Messages

Maybe you are looking for