Adding one additional row to table control of VA01
HI all,
I am working on free goods N:N senario which is not supported by sap standard.
so we have decided to club all the material on the basis of material group and PSTYV = 'tann' in the table control of va01 and at the end of tann we have to display the free goods .The user exit is USEREXIT_MOVE_FIELD_TO_KOMP.
Please help in in adding the additional row in table control of va01 (TCTRL_U_ERF_AUFTRAG).
Even i have gone through all the thread in sdn and tried all the solution but none of the solution is working .
plz quote solutions....
thanks..
Kundal.
The user exit is USEREXIT_MOVE_FIELD_TO_KOMP
Are you adding condition records, or adding free materials to VBAP? If free materials to VBAP, you're in the wrong exit, I think....look for routines that allow you to add to internal table XVBAP in includes named like MV45AFZ*, and remember to set you UPDKZ to 'I'-insert if you're adding new rows.
Not sure what you mean by not supported by SAP standard; SAP does support free goods, via config!
Edited by: BreakPoint on Mar 14, 2011 4:11 PM
Similar Messages
-
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
How to get all the index of "selected rows" in table control?
Hi Gurus,
I have a table control, wherein I need to get selected row so that I can get its respective TABIX.
I know that the event for capturing selected row is in PAI.
I also ensure that the w/ selColumn name in my screenpainter is exactly the same as my declaration in ABAP.
TOP INCLUDE
YPES: BEGIN OF Y_ZQID_CHECK,
IDNUM TYPE ZQID_CHECK-IDNUM,
WERKS TYPE ZQID_CHECK-WERKS,
MATNR TYPE ZQID_CHECK-MATNR,
LICHA TYPE ZQID_CHECK-LICHA,
LIFNR TYPE ZQID_CHECK-LIFNR,
ECOA_S TYPE ZQID_CHECK-ECOA_S,
ID_STAT TYPE ZQID_CHECK-ID_STAT,
ID_DATE TYPE ZQID_CHECK-ID_DATE,
FLAG_MAILCOA(1) TYPE C,
MARK(1) TYPE C, "Name of w/ SelColumn in ScreenPainter: T_ZQIDCHECK_DISCH-MARK
END OF Y_ZQID_CHECK.
DATA: T_ZQIDCHECK_DISCH TYPE STANDARD TABLE OF Y_ZQID_CHECK WITH HEADER LINE.
PAI
PROCESS AFTER INPUT.
* MODULE USER_COMMAND_9004.
LOOP AT T_ZQIDCHECK_DISCH.
MODULE READ_TC_DISCH .
ENDLOOP.
module READ_TC_DISCH input.
DATA: W_LINE_SEL TYPE SY-STEPL,
W_TABIX LIKE SY-TABIX.
GET CURSOR LINE W_LINE_SEL.
W_TABIX = TC_ID_ONLY-TOP_LINE + w_LINE_SEL - 1.
MODIFY T_ZQIDCHECK_DISCH INDEX TC_ID_ONLY-current_line.
If I am selecting single row, I can properly get the selected index via debug.
BUG:
When I'm selecting multiple rows in table control, only the last row is always being read inside the loop of my table control.
Please see the screenshot.
[url]http://img268.imageshack.us/img268/5739/tcselectedrows.jpg[url]
Notice in the debug screenshot, even if it's just in the 1st loop of table control, it automatically gets the 4th table control index, instead of the 2nd one.
Helpful inputs will be appreciated.
Thanks.
Jaime
Edited by: Jaime Cabanban on Dec 9, 2009 3:16 PMHi,
Are you sure that you have selected multiple line for tablecontrol in the property window of the tablecontrol.
Flowlogic.
LOOP WITH CONTROL TC_01.
Module Get_Marked.
ENDLOOP.
Module Pool
Module Get_Marked.
read the data from the internal table where mark = 'X'.
this should give you only selected records.
Endmodule.
Kindly check the tablecontrol property.
Regards,
Ranjith Nambiar -
How do I deselect a row in table control on scrren?
Hello All:
How do I write the code to deselect a row in table control on a screen? This is in dialog programming.
Thanks.
MithunI thought that the descriptions given in the Help are clear.
The ADDRESS function constructs a cell address string from separate row, column, and table identifiers.
ADDRESS(row, column, [type], [style], [table])
row: The row number of the address.
column: The column number of the address.
I dropped the comments about type, style and table as I don't use them here.
=IF(ISBLANK(INDIRECT(ADDRESS(ROW(),1))),"",INDIRECT(ADDRESS(ROW(),2))*INDIRECT(A DDRESS(ROW(),3)))
INDIRECT(ADDRESS(ROW(),1))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 1st one)
INDIRECT(ADDRESS(ROW(),2))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 2nd one)
INDIRECT(ADDRESS(ROW(),3))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 3rd one)
In short, when the formula is applied in row 9 it behaves like:
=IF(ISBLANK(A9),"",B9*C9)
The long syntax is required to be able to enter it only once in the header cell as described in the Help and in the PDF User Guide in a chapter entitled "Applying a Formula Once to Cells in a Column or Row".
As we want to use such a formula, it would be odd to destroy its ability using a different formula in a standard bottom row.
More, in a footer row, we may use shorter formulas than in other rows.
In a standard row 10 we would have to write =SUM(D2:D9)
in a footer row we enter only =SUM(D) which add the contents of every standard cells of the column D.
This feature is also described in the named resources.
Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:21:13) -
BDC : to select different rows in table control
Hi,
I have to fill many rows in table control and want to select different row one by one in increasing order which rows are filled in BDC.
Can anybody suggest me with coding...
thanks
nareshHi ,
I am attaching sample code for BDC transaction code is : FV11 , This code is also contains poage down concepts . By using this page down concept you can add number of item fields
Program Name : ZFV11_NEW
Program Description : To Upload Condition Records-FV11
Author : Jagadish
Start Date : 11/06/2007
REPORT zfv11
NO STANDARD PAGE HEADING LINE-SIZE 255.
DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
'* data element: ' followed with the data element
which describes the field.
If you don't have a data element use the
comment without a data element name
3.) The second line shows the fieldname of the
structure, the fieldname must consist of
a fieldname and optional the character '_' and
three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
TABLES : t100.
DATA: BEGIN OF record OCCURS 0,
data element: KSCHA
kschl(004), "Condition Type
data element: SELKZ_LIST
selkz(001),
data element: WERKS_D
werks(004), "Plant
data element: ELIFN
lifnr(010), "Vendor
data element: MATNR
matnr(018), "Material No.
data element: KBETR_KOND
kbetr(016), "Amount
data element: KODATAB
datab(010), "Condition Validity Date from
data element: KODATBI
datbi(010), "Condition Validity To
data element: MWSKZ
mwsk1(002),
END OF record.
DATA : BEGIN OF it_new OCCURS 0, " Internal Table for Header Data
kschl(004),
werks(004),
lifnr(010),
END OF it_new.
DATA : BEGIN OF it_item OCCURS 0, " Internal table for Item Data
werks(004),
lifnr(010),
matnr(018),
kbetr(016),
datab(010),
datbi(010),
mwsk1(002),
END OF it_item.
DATA : cnt(2) TYPE n,
fld(25) TYPE c.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
DATA : n TYPE n.
DATA:
BEGIN OF t_data OCCURS 0,
data TYPE string,
END OF t_data.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
DATA : p_mode TYPE c.
DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE,
it_msgtab1 TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
DATA : l_mstring(150).
DATA : BEGIN OF bdcdata OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdcdata.
PARAMETERS : p_file1 LIKE rlgrap-filename.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
LOOP AT it_new.
REFRESH bdcdata.
PERFORM bdc_dynpro USING 'SAPMV13A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV13A-KSCHL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RV13A-KSCHL'
it_new-kschl.
PERFORM bdc_dynpro USING 'SAPLV14A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV130-SELKZ(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=WEIT'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KONP-KBETR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'KOMG-WERKS'
it_new-werks.
PERFORM bdc_field USING 'KOMG-LIFNR'
it_new-lifnr.
DATA: "X(5) TYPE N,
N(5) TYPE N.
N = 0.
LOOP AT it_item.
N = N + 1.
ENDLOOP.
"X = 1.
CNT = 1.
DO N TIMES.
IF CNT > 19.
perform bdc_field using 'BDC_OKCODE' 'KOMG-MATNR(01)'.
perform bdc_field using 'BDC_OKCODE' '=P+'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
CNT = 1.
ENDIF.
cnt = 1.
LOOP AT it_item WHERE werks EQ it_new-werks AND lifnr EQ it_new-lifnr . "FROM x TO x.
CONCATENATE 'KOMG-MATNR(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-matnr.
CONCATENATE 'KONP-KBETR(' cnt')' INTO fld.
PERFORM bdc_field USING fld it_item-kbetr.
CONCATENATE 'RV13A-DATAB(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-datab.
CONCATENATE 'RV13A-DATBI(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-datbi.
CONCATENATE 'KONP-MWSK1(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-mwsk1.
cnt = cnt + 1.
if cnt = 20.
perform bdc_field using 'BDC_OKCODE' 'KOMG-MATNR(19)'.
perform bdc_field using 'BDC_OKCODE' '=P+'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
CNT = 1.
endif.
CLEAR it_item.
ENDLOOP.
ENDDO.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KONP-MWSK1(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
CALL TRANSACTION 'FV11' USING bdcdata MODE 'A'
UPDATE 'S'
MESSAGES INTO it_msgtab.
CLEAR bdcdata[].
PERFORM error.
ENDLOOP.
Start new screen -Subroutine for screen s *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field -Subroutine for field s *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "BDC_FIELD
*& Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
*& Form data_upload
FORM data_upload .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file1
TABLES
i_tab_converted_data = record
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " data_upload
*& Form error
FORM error .
LOOP AT it_msgtab.
IF it_msgtab-msgtyp = 'E'.
SELECT SINGLE * FROM t100 WHERE sprsl = it_msgtab-msgspra
AND arbgb = it_msgtab-msgid
AND msgnr = it_msgtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH it_msgtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH it_msgtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH it_msgtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH it_msgtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH it_msgtab-msgv1 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv2 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv3 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = it_msgtab-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = it_msgtab-msgv1.
APPEND it_mess.
WRITE: / it_msgtab-msgtyp, l_mstring(150).
ELSE.
WRITE: / it_msgtab.
it_mess-msgtyp = it_msgtab-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = it_msgtab-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " error
*& Form table_Control
FORM table_control .
SORT record BY lifnr matnr.
LOOP AT record.
ON CHANGE OF record-lifnr.
MOVE-CORRESPONDING record TO it_new.
APPEND it_new.
ENDON.
MOVE-CORRESPONDING record TO it_item.
APPEND it_item.
ENDLOOP.
ENDFORM. " table_Control
Reward if useful
Thanks
Jagadeesh.G -
How to select all the rows of table control in BDC
Hi All,
While I am doing BDC for Transaction Code MC88, After the first screen I will get another screen with tabble control, Here I need to select all the rows of table control, I am assignng the 'X' to the first field of Table Control which is the indicator for selection.
Here I am getting message called Indicator field is not in program and screen.
While doing Recording I am not able to record the indicator, Please any one let me know how to record the Entire table control selection.
Thanks in advance..Sorry about that lakshmi. Here is my code.
PERFORM dynpro USING : 'X' 'SAPMMCP6' '0105',
' ' 'RMCP2-MATNR' t_matnr,
' ' 'RMCP2-WERKS' t_werks,
' ' 'BDC_OKCODE' '=AKTV'.
PERFORM dynpro USING : 'X' 'SAPLMCPA' '0707',
' ' 'BDC_OKCODE' '=MRKE'.
PERFORM dynpro USING : 'X' 'SAPLMCPA' '0707',
' ' 'BDC_OKCODE' '=GRAO -
Unable to delete a row in table control
Hi,
I'm unable to delete a row in table control.
I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
Please help.
Regards,
Manasee
Message was edited by: Manasee Chandorkarhi,
kindly chk this.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL tab_control.
MODULE move_data_from_table.
ENDLOOP.
*& Module move_data_to_table OUTPUT
This is to move the data from the internal table to the table control
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to the table control
zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
zmpets_mode-modecode = int_factor-modecode.
zmpets_range-rangeid = int_factor-rangeid.
zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE. " move_data_to_table OUTPUT
*& Module move_data_from_table INPUT
Date is moved from the table control to the Internal Table
MODULE move_data_from_table INPUT.
To move the data from the table control to internal table 'INT_FACTOR'.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
int_factor-chk = line.
*here if the data is there, it will modify
MODIFY int_factor INDEX tab_control-current_line.
IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
APPEND int_factor.
CLEAR int_factor.
ENDIF.
ENDMODULE. " move_data_from_table INPUT
*delete a line from table control
MODULE user_command_9010 INPUT.
CASE sy-ucomm.
When an entry is deleted, and the entry is removed from the table
control.
WHEN 'DELETE'.
PERFORM f_del_frm_tab_cntrl.
ENDCASE.
ENDMODULE.
FORM f_del_frm_tab_cntrl .
LOOP AT int_factor WHERE chk = 'X'.
DELETE int_factor WHERE chk = 'X' .
CONTINUE.
ENDLOOP.
CLEAR int_factor.
ENDFORM.
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]
Message was edited by: Anversha s -
How to select perticular row in table control for BDC
Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RPHi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP -
Enable/Disable Rows In table Control
I m getting material number for particular material doc. if i get N rows in output i want to disable all other rows of table control.
Moderator message: please search for previous solutions to similar problems before asking.
Edited by: Thomas Zloch on Nov 20, 2010 7:24 PMHi,
In PBO, Loop at your table control lines, create a module inside it and use
LOOP AT SCREEN.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDLOOP.
Regards,
Senthil -
Selecting rows in table control
Hi experts,
I have question regarding selecting rows in table control. How can I select a row when a button is pressed. I cannot use the selection column in this case. Is there any option to achieve my requirement without using the selection column. Thanks.
regards,
sriram.By,
Using the Get cursor syntax you can achive the Selected row in Table control.
DATA : selrow TYPE i,
selindex TYPE i .
* getting the cursor line in Table Control for selected row
GET CURSOR FIELD selfield LINE selrow.
selindex = <tablecontrol>-top_line + selrow - 1.
Prabhu -
How to set total number of rows of table control
Hi All,
I want to set the total number of rows of table control. I don't want to display the blank rows in table.
Regards,
ShrinivasNeed some fine tuning regarding the scrollbar height but it's a start
Unless this isn't what you asked for
Small number of rows
Large number of rows
Attachments:
PlayingWithTable.vi 17 KB -
Add a new column in item table control of va01 screen
Hi All,
i have requirement to add new column in item table control of va01 screen 4900 for the custome field of vbap table
the required coloum is add with the help of access key
however whem i am trying to save data, that custom field is not populate
please let me know if any one had work on thisI think i solved the problem . The single way to to that is to modify the SAP standard Screen.
-
Hi,
Can some one give me the code to add rows in the table control (with out calling a dummy screen).
Thanks in advance.Hi Subbu,
Which transaction are you calling? Did you check if there is a BAPI or a function module to do the same?
You can reward by choosing the radio-buttons next to each response based on how helpful they were to you. Once completely answered, you will choose 'Solved Problem' option, if that answer helped you to solve it. If you solved it yourself, right next to your original post, there will be a button 'Solved myself' or something like that. Choosing this will close the post and there will be a blue start next to the post.
Srinivas -
Adding rows to table control or step loop
Hello friends,
I have creazted a table control as data input to ITAB. The user should be able to add more rows if nesseccary to the table during data input.
How can I write the code to enable the user to do this. I would appresiate code as example.
thanks
BlackHi,
Create a button for insert in the application toolbar..
When the button is pressed..
CASE SY-UCOMM.
WHEN 'INSERT'.
Add new rows.
tc-lines = tc-lines + 20.
TC will be the table control name..
ENDCASE.
Thanks,
Naren -
To give colours for a certain row in table control in module pool
Hi,
In module pool,,,,,When I am displaying the Table Control......Suppose in some rows personnel no. is there and for the person who has exited from the company should be highlighted with red colour.
Please some code..
thanks..Hi Jayasree,
I think I had a similar requirement to have a one column on a particular row
available for input where all other rows for that column were not. It took
me a while to figure this out but it was quite simple. I expect it will
work for colour changes too.
In Process Before Output
LOOP AT INTERNAL TABLE INTO WA WITH CONTROL TC
Call Module
END LOOP
In the module program the condition on which the colour change / input
status etc has to be changed using
IF condition = true
LOOP AT SCREEN
IF SCREEN-NAME = column name
Make your colour / input status change
MODIFY SCREEN
ENDIF
ENDLOOP
ENDIF
I hope this helps you.
Please search the forum before adding a new thread.
Maybe you are looking for
-
HOW TO GET THE MACBOOK PRO 13" TO RUN ON THE 1440x900 RESOLUTION
Hey guy, this is not a question bu more of an answer. I have read many forums with people wanting to up there res on the macbook pro from 1280x800 to something higher. i got my 13" MAcbook pro mid 2012 to run on the 1440x900 although its blurry and t
-
I cannot install a Laserjet M1132 on my 64-bit Lenovo X240 running Windows 7. I am trying to use the USB installer, which appears as a CD drive on my computer. Because I have turned AutoPlay off, I run the executable installer. The installation proce
-
Can't See Audio Files in iDvd for Slide Shows Once Applied
When you select music from iTunes for the iDvd Slideshow (I created it in iDVD, not in iPhoto), there is no place to see what songs you have in the playlist. Unlike the photos in the slideshow that can be removed and moved around. There should be a s
-
To develope material aging report
hi i want to develope a material aging report plz tel floe for this one and tables thanks venkat Moderator Message: Please read the rules of Engagement. SCN is not here to your job for you Thread locked. Edited by: Neil Gardiner on Jun 15, 2011 3:5
-
Try the Forte trace flag, trc:os:5:5. It will tell you the size and number of objects in memory. (Note: I don't think it well put together your entire object graph for you. (e.g. If you have pointers to other complex objects hanging off of your objec