Adding one field in selection-screen in rfitemar

hi experts
1)  I am converting the rfitemar to z or y program after that i have to add one field   wbs element(projk) in selection screen.
2) The WBS Element values should be displayed in the output report ie one column which contain wbs element values .
Plz help me as soon as possible

Hi,
   In this report,
1. find out the final table for display.
2. add ur custom fields in that table using appending structure.
3. find out correct enchance spot or BADI,...etc...before diaply(befor calling FM REUSE_GRID_DISPLAY or method  SET_TABLE_for_display or..etc).
4. in that enchance spot or badi u can write ur logic.
Regards,
Ramesh.

Similar Messages

  • In BDCs, after adding one field to the screen, which one is the better proc

    Hi,
    My client requirement In BDCs, after recording the legacy data by using MM01, After some time adding one field to the screen, How can we record the  for the new field.
    If any one knows pls help me total process.
    Warm regards,
    Venkat.

    Identify the screen in which this new field is added and simply add one more line to add the bdc record for this field in that screen.
    If the screen is also entirely new, then you have to identify the previous screen, the okcode to go to this new screen and finally the next screen and the okcode to go to the next screen along with the field BDC record.
    I don't think it is necessary to redo all the recording as long as you can follow the existing code.

  • Adding customer field to selection screen of RFKORD11 - Customer  Statement Printing Program:

    Hello,
    We are required to add an important customer field to selection screen of customer
    statement printing program: RFKORD11 for our South African branch.
    Please advise us regarding this matter,
    is there a proper user-exit or a repair is needed?
    Kind Regards.

    Enhancement
    text
    F050S001
    FIDCMT, FIDCC1,
      FIDCC2: Edit user-defined IDoc segment
    F050S002
    FIDCC1: Change
      IDoc/do not send
    F050S003
    FIDCC2: Change
      IDoc/do not send
    F050S004
    FIDCMT, FIDCC1,
      FIDCC2: Change outbound IDoc/do not send
    F050S005
    FIDCMT, FIDCC1,
      FIDCC2 Inbound IDoc: Change FI document
    F050S006
    FI Outgoing IDoc:
      Reset Clearing in FI Document
    F050S007
    FIDCCH Outbound:
      Influence on IDoc for Document Change
    F180A001
    Balance Sheet
      Adjustment
    FARC0001
    Enhancements within
      archiving (FI)
    FARC0002
    Additional Checks for
      Archiving MM Vendor Master Data
    FEDI0001
    Function exits for
      EDI in FI
    FICT0001
    Exits for
      inter-company transactions
    RFAVIS01
    Customer Exit for
      Changing Payment Advice Segment Text
    RFBVX001
    Enhancement for bank
      directory transfer (Austria)
    RFEPOS00
    Line item display:
      Checking of selection conditions
    SAPLBANK
    User exit: Bank data
    SAPLF040
    WF: Preliminary
      posting (authorized for release)
    SAPLF051
    Workflow for FI
      (pre-capture, release for payment)
    SAPLFCPD
    One-time account data
      or different payee in booking
    SAPLSSRV
    User exit: Bank
      account numbers
    RFKORIEX
    Automatic
      correspondence
    please check which one  is better .

  • Adding the field in selection screen

    Hi Guru's,
    how can i add the field in selection screen of t code qa33.
    can any one help me pls.
    Thanks & Best Regards,
    Rakhi.

    You can enhance the standard program RQEEAL10 using implicit enhancement points.
    Click the spiral (Enhance) button (Shift + F4)
    Go to Edit -> Enhancement operations -> Show Implicit Enhancement Poitns
    Create an Enhancement Implementation and include your code there.
    See the following link -> Source Code Enhancements - Part 5 of the Series on the New Enhancement Framework
    Hope it helps
    Neeraj

  • Adding f4-help to selection screen parameter field

    Hi all.
    I need to add search help to a parameter field on selection screen:
    PARAMETERS:
                 p_reciv LIKE soos7-recnam.
    What is the easiest way?
    tia, regards

    You can give F4 help by two ways:
    1. Using internal table
    2. Refering db table field.
    Following are e.gs:
    F4 help – using internal table example:
    DATA: BEGIN OF LI_FABGRP OCCURS 0,
    FABGRP LIKE ZAPO_FABGRP-FABGRP,
    BEGDA LIKE ZAPO_FABGRP-BEGDA,
    END OF LI_FABGRP.
    DATA : T_RETURN TYPE STANDARD TABLE OF DDSHRETVAL WITH HEADER LINE,
    L_RETFIELD TYPE DFIES-FIELDNAME.
    parameters : S_FABGR like ZAPO_FABGRP-FABGRP.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_FABGR.
    SELECT FABGRP BEGDA FROM ZAPO_FABGRP INTO table LI_FABGRP.
    SORT LI_FABGRP BY FABGRP ASCENDING BEGDA DESCENDING.
    Henter de mulige fabriksgrupper med nyeste BEGDA *indenfor hver
    DELETE ADJACENT DUPLICATES FROM LI_FABGRP COMPARING FABGRP.
    L_RETFIELD = 'FABGRP'.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    RETFIELD = L_RETFIELD
    DYNPPROG = SY-REPID
    DYNPNR = '1000'
    DYNPROFIELD = 'S_FABGR'
    VALUE_ORG = 'S'
    MULTIPLE_CHOICE = ' '
    TABLES
    VALUE_TAB = LI_FABGRP
    RETURN_TAB = T_RETURN
    EXCEPTIONS
    PARAMETER_ERROR = 1
    NO_VALUES_FOUND = 2
    OTHERS = 3.
    F4 help – using field example:
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_FABGR.
    CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
      EXPORTING
        tabname                   = mara
        fieldname                 = matnr
      SEARCHHELP                = ' '
      SHLPPARAM                 = ' '
      DYNPPROG                  = ' '
      DYNPNR                    = ' '
      DYNPROFIELD               = ' '
      STEPL                     = 0
      VALUE                     = ' '
      MULTIPLE_CHOICE           = ' '
      DISPLAY                   = ' '
      SUPPRESS_RECORDLIST       = ' '
      CALLBACK_PROGRAM          = ' '
      CALLBACK_FORM             = ' '
      SELECTION_SCREEN          = ' '
    IMPORTING
      USER_RESET                =
    TABLES
      RETURN_TAB                =
    EXCEPTIONS
      FIELD_NOT_FOUND           = 1
      NO_HELP_FOR_FIELD         = 2
      INCONSISTENT_HELP         = 3
      NO_VALUES_FOUND           = 4
      OTHERS                    = 5
    Select-options: s_rcode FOR g_grund . "Reason code
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_rcode-low.
    Validation for Reasoncode
    PERFORM sub_get_F4_rcodehelp .
    FORM sub_get_f4_rcodehelp .
    STRUCTURES Declarations
    TYPES: BEGIN OF ty_rcode ,
    grund TYPE mb_grbew,
    grtxt TYPE grtxt,
    END OF ty_rcode.
    *Internal Table declaration
    DATA : li_rcode TYPE STANDARD TABLE OF ty_rcode WITH HEADER LINE.
    SELECT grund grtxt
    INTO TABLE li_rcode
    FROM t157e
    WHERE spras = sy-langu .
    *Help functions for external use
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    retfield = 'fieldname'
    dynpprog = 'programname
    dynpnr = '1000'
    dynprofield = 'S_PCODE'
    value_org = 'S'
    TABLES
    value_tab = li_rcode
    EXCEPTIONS
    parameter_error = 1
    no_values_found = 2
    OTHERS = 3 .
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " sub_get_F4_rcodehelp

  • Adding fields on selection screen dynamically

    Hi all,
    Can we add some fields to selection screen dynamically on pushbutton click?
    Regards,
    Dnyanesh

    just have look below code
    REPORT zrsdvsr1
           LINE-SIZE 220
           LINE-COUNT 65(5).
    TYPE-POOLS : slis.
    TABLES
    TABLES: vbak.
    DATA DECLARATIONS
    Ranges
    RANGES: r_posnr FOR vbap-posnr.
    DATA: BEGIN OF t_veramt OCCURS 0,
            vbeln TYPE vbap-vbeln,
            posnr TYPE vbap-posnr,
            matnr TYPE vbap-matnr,
            netwr TYPE vbap-netwr,
            mwsbp TYPE vbap-mwsbp,
          END OF t_veramt.
    DATA: BEGIN OF t_disamt OCCURS 0,
            vbeln TYPE vbap-vbeln,
            posnr TYPE vbap-posnr,
            matnr TYPE vbap-matnr,
            netwr TYPE vbap-netwr,
            mwsbp TYPE vbap-mwsbp,
            netwr_v TYPE vbap-netwr,
            mwsbp_v TYPE vbap-mwsbp,
            disc_val TYPE vbap-mwsbp,
          END OF t_disamt.
    *&   ALV FIELDS
    DATA : alv_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
           alv_layout TYPE slis_layout_alv.
    SELECTION SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS:  p_ver RADIOBUTTON GROUP g1 USER-COMMAND rad DEFAULT 'X',
                 p_sab RADIOBUTTON GROUP g1 .
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    SELECT-OPTIONS: s_vbeln FOR vbak-vbeln NO INTERVALS MODIF ID gr1.
    PARAMETERS:    p_dwfile TYPE  rlgrap-filename
                   DEFAULT 'C:\test1.txt' MODIF ID gr2,         "#EC NOTEXT
                   p_upfile TYPE  rlgrap-filename
                   DEFAULT 'C:\test.txt' MODIF ID gr3.          "#EC NOTEXT
    SELECTION-SCREEN END OF BLOCK b2.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_upfile.
    **************F4 Help For Input File Name****************************
      CALL FUNCTION 'F4_FILENAME'
           EXPORTING
                program_name  = syst-cprog
                dynpro_number = syst-dynnr
                field_name    = 'C:\'
           IMPORTING
                file_name     = p_upfile.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwfile.
    **************F4 Help For Input File Name****************************
      CALL FUNCTION 'F4_FILENAME'
           EXPORTING
                program_name  = syst-cprog
                dynpro_number = syst-dynnr
                field_name    = 'C:\'
           IMPORTING
                file_name     = p_dwfile.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF  p_sab = 'X'.
          IF screen-group1 = 'GR1' OR screen-group1 = 'GR2'.
            screen-active = '0'.
            screen-invisible = '1'.
          ELSE.
            screen-active = '1'.
            screen-invisible = '0'.
          ENDIF.
          MODIFY SCREEN.
        ELSE.
          IF screen-group1 = 'GR3'.
            screen-active = '0'.
            screen-invisible = '1'.
          ELSE.
            screen-active = '1'.
            screen-invisible = '0'.
          ENDIF.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    START-OF-SELECTION
    START-OF-SELECTION.
    Check Radio Button
      IF p_ver = 'X'.
        PERFORM get_details_open_so_vertex.
      ELSE.
        PERFORM get_details_open_so.
      ENDIF.
    Display the output.
      PERFORM diplay_report .
    regards
    vinod

  • Adding new field to MB51 screen output

    Hi All,
    I need to add a new field TCODE2 from MKPF table on the screen output of MB51. I have added my new field thro SPRO following the below steps:-
    Go to SPRO -- MM -- Inventory Management and Physical Inventory -- Reporting -- Define Field Selection for Material Document List
    Here I have give
    RM07DOCS MKPF TCODE2 Transaction code -- output box checked
    and saved.
    Now I  tried to re-execute the transaction MB51 but not able to see the Tcode2 on the output screen .
    Can any one help me out, if I am missing out something or is there any thing else i need to check on the ALV output to see the field TCODE2 on the screen og MB51?
    Regards
    Shilpa.

    Hi,
    Check these notes:
    Note 357187 - MB51: Fields in field catalog / selection screen
    Note 828104 - Enhancing MB51 for AFS
    I hope this helps you
    Regards
    Eduardo

  • Add custom fields on selection screen  and ouput in Transaction QM11

    Hi All,
       i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
      i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
    please requeting the help asap if it is possible.

    Have a glance in below thread.
    Enhancing transaction QM10
    Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well.

  • How can I add a new field in selection screen for this report

    *& Report  ZGS_BARKODLA_HIZLI_GIRIS
    report  zgs_barkodla_hizli_giris.
    tables: mara,
            mseg,
            mch1,
            *mch1,
            mkpf,
            mchb ,
            makt.
    type-pools: esp1.
    data: i_message_tab  type esp1_message_tab_type,
          wa_message_tab type esp1_message_wa_type ,
          sc_count type i.
    ALV
    type-pools: slis, kkblo.
    data: gs_layout   type slis_layout_alv                     ,
          gt_fldcat   type slis_t_fieldcat_alv with header line,
          gt_header   type slis_t_listheader   with header line,
          gt_sortin   type slis_t_sortinfo_alv with header line,
          g_repid     like sy-repid                            .
    define add-fieldcat.
      gt_fldcat-fieldname     = &1.
      gt_fldcat-ref_tabname   = &2.
      gt_fldcat-seltext_s     = &3.
      gt_fldcat-seltext_m     = &3.
      gt_fldcat-seltext_l     = &3.
      gt_fldcat-reptext_ddic  = &3.
      gt_fldcat-ddictxt       = 'M'.
      append gt_fldcat.
      clear  gt_fldcat.
    end-of-definition.
    types: begin of titab,
            sel   type xfeld,
            matnr type matnr,
            maktx type maktx,
            charg type charg_d,
            menge type menge_d,
            erfmg type erfmg,
           end of titab.
    data : witab type titab.
    data : itab type table of titab.
    data : ok_code type sy-ucomm.
    controls: tc_itab type tableview using screen 0100.
    data: gv_header like bapi2017_gm_head_01,
          gv_code   like bapi2017_gm_code.
    BAPI export parameters
    data: gv_headret type bapi2017_gm_head_ret,
          gv_matdoc  type bapi2017_gm_head_ret-mat_doc,
          gv_matyear type bapi2017_gm_head_ret-doc_year.
    data : lv_objek like inob-objek .
    data : ls_inob  like inob .
    data : imseg type ty_t_mseg.
    data : wmseg type mseg.
    data : answer.
    data : count type i.
    data : v_atinn type atinn.
    BAPI movement details
    data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
          with header line.
    data: i_return type bapiret2 occurs 0 with header line.
    start-of-selection.
    call function 'CONVERSION_EXIT_ATINN_INPUT'
       exporting
         input  = 'Z_ORAN'
       importing
         output = v_atinn.
      call screen 100.
    *&      Module  status_0100  OUTPUT
    module status_0100 output.
      set pf-status '100'.
      set titlebar '100'.
      mseg-werks = 1000.
      mseg-umwrk = 1000.
    **added
      sc_count = sc_count + 1.
      if sc_count eq 1.
        mseg-bwart = 313.
      endif.
      mkpf-budat = sy-datum.
    **added
      describe table itab lines tc_itab-lines.
    endmodule.                 " status_0100  OUTPUT
    *&      Module  user_command_0100  INPUT
    module user_command_0100 input.
      data field(20).
      data: line_t like sy-index.
      data: lines  like sy-index.
      data line_count like sy-loopc.
      data: begin of cols,
             screen      like screen,
             index       type i,
             selected(1) type c,
             vislength   like icon-oleng,
             invisible(1) type c,
           end   of cols.
      case ok_code.
        when 'DELE'.
          delete itab where sel eq 'X'.
        when 'ENTE'.
          check *mch1-charg is not initial.
          read table itab into witab with key charg = *mch1-charg.
          if not sy-subrc is initial.
            witab-charg = *mch1-charg.
            select single matnr from mch1 into witab-matnr
                               where charg eq witab-charg.
            if not syst-subrc is initial.
              set cursor field '*MCH1-CHARG'.
              message e115(12) with *mch1-charg.
            endif.
            select single maktx from makt into witab-maktx
                               where matnr eq witab-matnr
                                 and spras eq syst-langu.
            witab-erfmg = 1.
            concatenate witab-matnr witab-charg into lv_objek .
            clear ls_inob .
            select single * into ls_inob
                            from inob
                            where objek = lv_objek and
                                  klart = '023'    and
                                  obtab = 'MCH1' .
            select single atflv from ausp into witab-menge
                     where objek = ls_inob-cuobj and
                           klart = '023' .
            append witab to itab.
    **added
            clear *mch1-charg.
    **added
          endif.
        when 'SAVE'.
          if mkpf-budat is initial.
            set cursor field 'MKPF-BUDAT'.
            message e055(00).
          endif.
          if mseg-lgort is initial.
            set cursor field 'MSEG-LGORT'.
            message e055(00).
          endif.
          if mseg-umlgo is initial.
            set cursor field 'MSEG-UMLGO'.
            message e055(00).
          endif.
          if mseg-bwart is initial.
            set cursor field 'MSEG-BWART'.
            message e055(00).
          endif.
          refresh imseg.
          loop at itab into witab.
            move-corresponding witab to wmseg.
            append wmseg to imseg.
          endloop.
          call function 'ZMM_POPUP_WITH_DATA'
            exporting
              imseg  = imseg
            importing
              answer = answer.
          if answer eq 'Y'.
            perform create_goods_movement.
          endif.
        when 'P--'.
          clear ok_code.
          perform paging using 'P--'.
          set cursor field 'MARA-MATNR' line 1.
        when 'P-'.
          clear ok_code.
          perform paging using 'P-'.
          set cursor field 'MARA-MATNR' line 1.
        when 'P+'.
          clear ok_code.
          clear lines.
          perform paging using 'P+'.
          set cursor field 'MARA-MATNR' line 1.
        when 'P++'.
          clear ok_code.
          perform paging using 'P++'.
          set cursor field 'MARA-MATNR' line 1.
        when 'SORA'.
          read table tc_itab-cols into cols with key selected = 'X'.
          if sy-subrc is initial.
            field = cols-screen.
            field = field+5(10).
            sort itab ascending by (field).
          endif.
        when 'SORZ'.
          read table tc_itab-cols into cols with key selected = 'X'.
          if sy-subrc is initial.
            field = cols-screen.
            field = field+5(10).
            sort itab descending by (field).
          endif.
        when 'PRNT'.
          perform write_alv.
      endcase.
    endmodule.                 " user_command_0100  INPUT
    *&      Module  read_table  OUTPUT
    module read_table output.
      mara-matnr = witab-matnr.
      makt-maktx = witab-maktx.
      mch1-charg = witab-charg.
      mseg-menge = witab-menge.
      mseg-erfmg = witab-erfmg.
      line_count = sy-loopc.
    endmodule.                 " read_table  OUTPUT
    *&      Module  write_table  INPUT
    module write_table input.
      witab-matnr = mara-matnr.
      witab-maktx = makt-maktx.
      witab-charg = mch1-charg.
      witab-menge = mseg-menge.
      witab-erfmg = mseg-erfmg.
      modify itab from witab index tc_itab-current_line.
    endmodule.                 " write_table  INPUT
    *&      Module  exit  INPUT
    module exit input.
      leave to screen 0 .
    endmodule.                 " exit  INPUT
    *&      Form  create_goods_movement
    form create_goods_movement .
      clear : gv_header, i_return[], i_goodsmvt_items[].
      gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
      gv_header-pr_uname = sy-uname.
    GM with reference to reservation
      loop at itab into witab.
        i_goodsmvt_items-material   = witab-matnr.
        i_goodsmvt_items-entry_qnt  = witab-erfmg.
        i_goodsmvt_items-entry_uom  = 'ST'.
        i_goodsmvt_items-move_type  = mseg-bwart.
        i_goodsmvt_items-plant      = mseg-werks.
        i_goodsmvt_items-stge_loc   = mseg-lgort.
        i_goodsmvt_items-move_plant = mseg-umwrk.
        i_goodsmvt_items-move_stloc = mseg-umlgo.
        i_goodsmvt_items-batch      = witab-charg.
        append i_goodsmvt_items.
      endloop.
    find BAPI processing transaction
      if gv_code is initial.
        perform determine_bapi_code using mseg-bwart
                                 changing gv_code.
      endif.
      call function 'BAPI_GOODSMVT_CREATE'
        exporting
          goodsmvt_header  = gv_header
          goodsmvt_code    = gv_code
        importing
          goodsmvt_headret = gv_headret
          materialdocument = gv_matdoc
          matdocumentyear  = gv_matyear
        tables
          goodsmvt_item    = i_goodsmvt_items
          return           = i_return[].
    cancel blocking process
      loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
        exit.
      endloop.
      if sy-subrc ne 0.
        refresh i_message_tab.
        call function 'BAPI_TRANSACTION_COMMIT'
          exporting
            wait = 'X'.
        wa_message_tab-msgid = 'M7'..
        wa_message_tab-msgty = 'S'.
        wa_message_tab-msgno = '060'.
        wa_message_tab-msgv1 = gv_matdoc.
        wa_message_tab-msgv2 = ''.
        wa_message_tab-msgv3 = ''.
        wa_message_tab-msgv4 = ''.
        append wa_message_tab to i_message_tab.
      else.
        refresh i_message_tab.
        call function 'BAPI_TRANSACTION_ROLLBACK'.
    write a message as there is an unexpected error.
        loop at i_return.
          wa_message_tab-msgid = i_return-id.
          wa_message_tab-msgty = i_return-type.
          wa_message_tab-msgno = i_return-number.
          wa_message_tab-msgv1 = i_return-message_v1.
          wa_message_tab-msgv2 = i_return-message_v2.
          wa_message_tab-msgv3 = i_return-message_v3.
          wa_message_tab-msgv4 = i_return-message_v4.
          append wa_message_tab to i_message_tab.
        endloop.
      endif.
      call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
        tables
          i_message_tab = i_message_tab.
    endform.                    " create_goods_movement
    *&      Form  determine_bapi_code
    form determine_bapi_code using p_bwart type bwart
    changing p_code type bapi2017_gm_code.
      data: lt_t158b type table of t158b with header line.
      clear p_code.
      select tcode from t158b into corresponding fields of table lt_t158b
      where bwart eq p_bwart.
      loop at lt_t158b.
        select single gmcode from t158g into p_code
        where tcode eq lt_t158b-tcode.
        if sy-subrc is initial.
          exit.
        endif.
      endloop.
    endform. " determine_bapi_code
    *&      Form  paging
    form paging using code.
      data: i type i,
            j type i.
      case code.
        when 'P--'. tc_itab-top_line = 1.
        when 'P-'.
          tc_itab-top_line = tc_itab-top_line - line_count.
          if tc_itab-top_line le 0.
            tc_itab-top_line = 1.
          endif.
        when 'P+'.
          i = tc_itab-top_line +  line_count.
          j = tc_itab-lines -  line_count + 1.
          if j le 0.
            j = 1.
          endif.
          if i le j.
            tc_itab-top_line = i.
          else.
            tc_itab-top_line = j.
          endif.
        when 'P++'.
          tc_itab-top_line = tc_itab-lines - line_count + 1.
          if tc_itab-top_line le 0.
            tc_itab-top_line = 1.
          endif.
      endcase.
    endform.                    " paging
    *&      Form  write_alv
    form write_alv .
      perform find_list_header.
      perform fill_field_cat.
      perform fill_sortinfo.
      g_repid = sy-repid.
      gs_layout-colwidth_optimize = 'X'.
      gs_layout-zebra             = 'X'.
      answer = 'Y'.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_buffer_active        = ''
          i_callback_program     = g_repid
          i_save                 = 'A'
        i_callback_top_of_page = 'TOP_OF_PAGE'
          is_layout              = gs_layout
          it_fieldcat            = gt_fldcat[]
         it_sort                = gt_sortin[]
        tables
          t_outtab               = itab[].
    endform.                    " write_alv
         Form  find_list_header
    form find_list_header.
      data : v_datum(10),
             v_datlo(10),
             v_dathi(10),
             v_uzeit(8).
      clear: gt_header, gt_header[].
      gt_header-typ  = 'H'.
      gt_header-info = sy-title.
      append gt_header.
      clear gt_header.
      gt_header-typ  = 'S'.
      gt_header-key  = 'Çal&#305;&#351;t&#305;rma Zaman&#305; : '.
      write syst-datum to v_datum.
      write syst-uzeit to v_uzeit.
      concatenate v_datum '/' v_uzeit into gt_header-info.
      append gt_header.
    endform.                    " find_list_header
         Form  fill_field_cat
    form fill_field_cat.
      refresh gt_fldcat.
      clear   gt_fldcat.
      gt_fldcat-key = 'X'.
      add-fieldcat 'MATNR'  'MARA' ''.
      add-fieldcat 'MAKTX'  'MAKT' ''.
      add-fieldcat 'CHARG'  'MSEG' ''.
      gt_fldcat-do_sum = 'X'.
      add-fieldcat 'MEINS'  'MARA' 'Olcu Birimi '.
      gt_fldcat-do_sum = 'X'.
      add-fieldcat 'ERFMG'  'MSEG' 'Adet'.
    endform.                    " fill_field_cat
         Form  fill_sortinfo
    form fill_sortinfo.
      gt_sortin-up            = 'X'.
      gt_sortin-fieldname     = 'MATNR'.  append gt_sortin.
    endform.                    " fill_sortinfo
         Form  top_of_page                                              *
    form top_of_page.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
        exporting
          i_logo             = 'ZKUTAS'
          it_list_commentary = gt_header[].
    endform.                    " top_of_page

    HI,
    if it is a normal report program then you can directly create a Selection screen field.
    After the Type-pool you can use Parameters or Select-options to create the selection screen field..
    If it is a Modulpool program then you can create a selection scren field like
    SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
    PARAMETERS: p1(10) TYPE c.
    SELECTION-SCREEN END OF SCREEN 1100.
    defines a selection screens – 1100 – as subscreens.
    The next screen number of screen 100 is 100 (statically-defined).
    PROCESS BEFORE OUTPUT.
      MODULE status_0100.
      CALL SUBSCREEN area INCLUDING sy-repid number.
    PROCESS AFTER INPUT.
      MODULE cancel AT EXIT-COMMAND.
      CALL SUBSCREEN area.
      MODULE user_command_0100.
    look at the below link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
    Regards
    Sudheer

  • How to add Material type(MTART) field on Selection screen of MB5B transaction code.

    Hi All,
        Please let me know how to add material type field on selection screen of MB5B transaction
    For that i made copy ZMB5B_COPY of original report RM07MLBD.
    Thanks in adv .
    Samadhan

    Hi,
    Once you copied the standard report to Z report, you can MTART in selection screen like below.
    and in order to inlcude the same in programming logic, we have three option.
    1) Check all related select queries, and include MTART in SELECT query using inner join with MARA.
    2) In START-OF-SELECTION event fill MATNR as shown below.
    3) If user entered any value in MTART, then before displaying the report just check material type of each material in the final internal table(which is used to display report) delete enteries from internal table accordingly.
    START-OF-SELECTION.
    IF MTART[] IS NOT INITIAL AND MATNR[] IS INITIAL.
        SELECT MATNR FROM MARA INTO MATNR-LOW WHERE MTART IN MTART.
          MATNR-OPTION = 'EQ'.
          MATNR-SIGN = 'I'.
          APPEND MATNR.
          CLEAR MATNR.
        ENDSELECT.
    ENDIF.
    The above option has one limitation: The selection screen variables has some restriction, please read the below thread.
    Facing problem in select statement dump DBIF_RSQL_INVALID_RSQL CX_SY_OPEN_S
    Getting Dump in the select query has more than 2000 entries
    Hope this will work for you .
    regards,
    Rajesh Sadula.

  • Restrict values for F4 on field in Selection-screen

    Hi,
    For f4 on particular field I am getting list of values. These values are fixed in Value Range of DOMAIN of that field. There are 26  values fixed for that DOMAIN. Now what I need is I need to restrict 26th value from displaying on F4 for that field in selection screen.
    I tried doing it in AT SELECTION SCREEN OUTPUT event  using F4_ON_VALUE REQUEST  FM, fetching data and deleting 26th entry , but before i delete it, It shows all values in selection-screen.
    Please any one guide me.
      Thanks,
    Vanitha P

    You have to use AT SELECTION-SCREEN ON VALUE-REQUEST event.
    Tables:mara.
    TYPES :BEGIN OF gty_mtart,
           mtart TYPE mara-mtart,
           END OF gty_mtart.
    DATA: gt_mtart  TYPE STANDARD TABLE OF gty_mtart,
          gtt_mtart TYPE gty_mtart.
    DATA: gt_return_tab  TYPE TABLE OF ddshretval,
          gwa_return_tab TYPE ddshretval.
    SELECT-OPTIONS:so_mtart FOR mara-mtart.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_mtart-low.
      REFRESH gt_mtart.
      gtt_mtart-mtart = 'Z01'.
      APPEND gtt_mtart TO gt_mtart.
      gtt_mtart-mtart = 'Z02'.
      APPEND gtt_mtart TO gt_mtart.
      gtt_mtart-mtart = 'Z03'.
      APPEND gtt_mtart TO gt_mtart.
      gtt_mtart-mtart = 'Z04'.
      APPEND gtt_mtart TO gt_mtart.
      gtt_mtart-mtart = 'Z05'.
      APPEND gtt_mtart TO gt_mtart.
      gtt_mtart-mtart = 'Z06'.
      APPEND gtt_mtart TO gt_mtart.
      gtt_mtart-mtart = 'Z90'.
      APPEND gtt_mtart TO gt_mtart.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
    *   DDIC_STRUCTURE         = ' '
              retfield               = 'SO_MTART-LOW'
    *   PVALKEY                = ' '
    *   DYNPPROG               = ' '
    *   DYNPNR                 = ' '
    *   DYNPROFIELD            = ' '
           value_org              = 'S'
    *   MULTIPLE_CHOICE        = ' '
    * IMPORTING
    *   USER_RESET             =
            TABLES
              value_tab              = gt_mtart
    *   FIELD_TAB              =
           return_tab             = gt_return_tab
    *   DYNPFLD_MAPPING        =
         EXCEPTIONS
           parameter_error        = 1
           no_values_found        = 2
           OTHERS                 = 3
      IF sy-subrc = 0 AND gt_return_tab IS NOT INITIAL.
        CLEAR gwa_return_tab.
        READ TABLE gt_return_tab INTO gwa_return_tab INDEX 1.
        IF sy-subrc = 0 AND gwa_return_tab-fieldval IS NOT INITIAL.
          so_mtart-low = gwa_return_tab-fieldval.
        ENDIF.
      ELSEIF sy-subrc <> 0.
        REFRESH gt_return_tab.  CLEAR: gwa_return_tab.
      ENDIF.

  • Setting only the TO field on the Created on Field in Selection screen to Current date

    Hello,
    We have a requirement to Set only the To date in the Created on Field in Selection screen to the Current date, I have tried through Dynamic variable option to set the Date calculation but I am able to see Options to set the Current date to From or From and To Created on Date fields instead of setting the Current date only to To created on Field.
    We are in 4.7 and are not supported with user defined variables, Appreciate your inputs on this.
    Thanks and Regards
    Mohammed Roshan

    >
    sunitha j wrote:
    > Hi ,
    >
    > It would br gr8..if u could give some more info about the usage of this class..i mean if i hav to implement it in my program....wat is the necessary data that needs to b copied...
    >
    > Thanx,
    > Sunitha
    what Text field you want to change.
    Since you are working with Dynpros , you have to split the screen in two parts, and one for the Showing differenet fonts and other your normal Dynpro information.
    you need to use the Method ADD_TEXT Did you check the program DD_STYLE_TABLE.

  • How can i declare a single radio button field in selection-screen ?

    How can i declare a single radio button field in selection-screen ?

    >
    Rob Burbank wrote:
    > And how will you turn it off once it is turned on??
    >
    > Rob
    Thats correct ;)...See ravi if users will ask so many things its our Job to convay the correct solution ....
    Just post your org requirement..SOo some body guide you better//
    Sas

  • Validate a field on selection screen based on value entered on anothr field

    HI,
    There is a program with some fields in selection screen in EWM. The first field is Warehouse. I need to add another field 'Entity to Dispose' in such that what ever value I enter in Warehouse field, its corresponding values should only be displayed as F4 help for 'Entity to Dispose' field.
    For eg: If I select the warehouse as 0799(lets say), then the F4 help for Entity to Dispose field should display only the values which are related to warehouse 0799 (and any other values pertaining to other warehouse should not appear).
    Could anyone suggest, how this can be achieved?
    Thanks in advance.
    Regards,
    Pavan

    Hi,
    You can use FM
    DYNP_VALUES_READ
    DYNP_VALUES_UPDATE
    to read the another field value and Using that field build your internal table for f4 values.
    and use FM F4IF_INT_TABLE_VALUE_REQUEST for F4 values..
    do this on AT SELECTION-SCREEN ON VALUE REQUEST FOR <YOUR_F4_FIELDNAME>.

  • Unable to have field in selection screen of Infopackage

    Hello Gurus,
    I have a small problem,
    I am unable to bring on field in selection screen in Infopackage,
    even thou the object is ticket in DataSources selection option,
    I have noted that the object is of type DEC is it something to do with,
    Or is their any other way to have this object in selection screen of Infopackage,
    Please help me on this,
    Thanks & Regards,

    Bhanu its field type is DEC that’s why its not coming in selection screen in Infopackage .This is a big problem in our Development as this field is SPRIO(Procurement Priority) and we want to restrict this field with conduction SPRIO EQ 1.
    Our DataSource is based on Infoset , Bhanu is it possible to restrict this Field in Infoset writing some code. As their is option in Infoset for CODE we tried this but didn’t work.
    or any other way to restrict this field with 1.
    I really appreciate your reply.
    Thanks Once again.

Maybe you are looking for

  • Setup a printer from command line issues

    I have been trying to figure out why my arguments are not working. I was originally creating a .bat file with the PrinterUIEntry commands, but I was getting an "Invalid Argument" error. I switched to the cscript method and I am still not understandin

  • Entourage Freezes when I try to email an attachment

    After installing SL yesterday I have noticed that every time i try to email an attachment in Entourage I have to do a force quit as it freezes. I can email from Word ie. send attachment via email when I am in word, but can not create an email in Ento

  • Creating client proxy in ABAP failed

    Hello, I tried to create a client proxy for a WebService and got the same error like in this thread: [Error when create client proxy in ABAP; "Exception occured in library handler". I've got only a little of knowledge about SOAP that's why I cannot e

  • Downloading mountain lion and sharing between 2 macs

    When mountain lion is released how do I go about sharing the download between a I Mac and my daughters mac book pro wihich I bought and she uses. I believe Apple allows one paid download to be shared between 5 macs you own . I have a I tunes account

  • When I try to open a previous backup on time machine, I can't?

    The other day, I was viewing backups from 2 years ago and in time machine looking at the timeline, Now, I try to do the same and open a backup and it only lists today. All the previous backups are there but they're dimmed and there's no dates listed