Adding one more participant to approve the task in workflows

Hi All,
I'm having a requirement of adding the adding one more workflow user for approving the task. How to add one more workflow user in the human and allow him to approve the task which has been already approved by another workflow user, means it is hierarchical approval.
First the task has been approved by assignee then finally the task has been approved by the approver who has admin rights.
Regards,
CH

Hi,
I have added the users but i need to approve the same task for twice then it is propagating the data to the other end. Is there any hierarchy that we have to
define for the user inside human task.
Everytime I'm approving the request for twice. How to approve the request for only one time.
Regards,
CH

Similar Messages

Adding one more selection field in the standard data source

Hi SAP Gurus,
I'd like to know how to add one field as a selection field for the data source.I used 0FI_GL_4 Datasource .It has 2 selection.Now I want to add one more field as a selection field .How to mark that field as selection?I tried by using RSA6 ,But I'm unable to change the previous selection.
Please let me know how to fix it?
I'll assign the points ...
Thanks & regards
Raja

Pradip,
when ever you create any Generic DS, you can find generic DS(I checked this), comming append fields(it's happend to me)... there is no meaning.. as we know... we will extract the data for append fields using existing DS.
Comming Raju:
to my knowledge, you should not add that field as selection enabled(wait for others posts). I had seen many posts for working on this... by updating the Table ROOSFIELD table for the respective DS. I never implemented this... if you update this using any custom program be careful. Ihave ccreated the program for append fields not for Standard Extractor.
Try to search any SAP Notes: 571985
All the best.
Regards,
Nagesh Ganisetti.

Strange bug -- adding one more button OR page causes Form warning to appear

I'm building a simple interactive document in InDesign CS4 on the Mac, to be exported/delivered as a PDF. There are a few text-based buttons on the Master Page that are set to Go To a Text Anchor on Release. There are 4 buttons of these buttons on the page, and each one leads to a different page in the document, and they all work fine. They are all built the same way.
I want to export a PDF that opens cleanly in Reader, meaning no unexpected dialog boxes or warning messages appear. Up until this point, my document opens cleanly in Reader.
However, when I create a FIFTH button (using the exact same method used to create the other buttons), OR I add ANY more pages to my document (which currently stands at 16 pages, but will need to ultimately be upwards of 40), for some reason, opening the PDF in Reader causes Reader to start displaying the large, distracting pink warning message at the top of the page:
"Please fill out the following form. You cannot save data typed into this form. Please print your completed form if you would like a copy for your records."
The fifth button I create (from scratch) causes this message to appear.
Or, if I add another page (using my Master Page, where the buttons are used), this message appears. Even if the fifth button is not created, and I add another page from the Master, this message appears.
If I add a blank new page (without using the Master Page), the message does NOT appear.
So, for some reason, adding ONE more button, or referring to the Master Page in the document ONE more time by adding a 17th (or more) pages, seems to kick InDesign/Acrobat Reader into thinking my document is suddenly a form, and causes Reader to display that obnoxious pink message when opening the document.
I've tried several troubleshooting steps.
- I've ensured my buttons have unique names.
- I've tried creating the fifth button from scratch, and also tried creating it from duplicating one of the existing "good" buttons.
- I've made sure the button has a destination page/Text Anchor to go to.
- I've opened the PDF in Acrobat Pro 9, and gone through all of the page and buttons in the Forms Manager, and there is nothing out of the ordinary in that view.
Why is Reader suddenly thinking my document is a form (that "cannot be edited/saved") when I add one more button, or one more page!? It's bizarre, and quite frustrating.
Thanks for any insights,
Robbie

You can use that same workaround with ID CS4 files. You just have to make the PDF and then go into Acrobat to add the security that doesn't allow editing (Acrobat -> Security -> Encrypt with Password) . That gets rid of the warning about the form. Of course if you actually have a form somewhere in your document, you won't be able to use that......

How to Create one more SOA-INFRA under the same domain in weblogic server

Hi All,
Can anybody can guide how to create one more soa-infra under the same domain. In order to maintain my composites to be deployed into
different domains, I need to create one more soa-infra and deployed all the composites under that one.
Please let me know if any demo is available for this activity to be gets completed.
Regards,
CH

Hi Vijay,
There are several composites which needs to be deployed and maintained in the server. So, we I'm trying to maintian
by deploying composites into 3 different SOA-INFRA's so if one is not accessible, we can look into it and others can access the
composites from another SOA-INFRA instead of creating domains.
Let me know what will be feasible way to perform this activity.
Regards,
CH

Adding one more field to the VL06O report

Hi everybody
When u execute the TR code VL06O a screen will appear from that screen select list outbound deliveries and then provide some date and execute.
The output will come having fields delivery,ship-to-party,name of ship-to-party like that 7 fields are there and now i want to see one more field called shipment number in the output along with the previuos 7 fields.
what should i do it is a standard program?
please guide me?

Hello.
See note 128150 to more details.
There are user exists to add new fields (user fields).
Regards.

Adding some more line items in the unconfirmed Transfer Order

Hi All,
We do kitting activity at our warehouse i.e. several components make up an assembly of a particular final product. The WH creates a production order(BOM) based on which the system creates TO wherever stock of individual components are available for picking. However, the remaining components which are required to make up the product are still awaited in such a case (stock unavailable at present). Under this situation, is it possible that the balance remaining components can be added to the same original TO created earlier (i.e. where only available line items of that TO is confirmed and the TO header is still open).
Alternatively, can we add some more line items in the same unconfirmed Transfer Order to facilitate this kitting process and thereby confirming the TO header finally.
A quick feedback will be appreciated. Thanks.
Regards
Jaman

Hi,
If you know what all the items you will include in one TO, even though you haven't pick the items;
In the TO, you have an option to make the items "Inactive" for which picking hasn't been done.
After making the items "Inactive", if you save the TO, it will allow you to confirm the TO, but then, it will create the new TO with the inactive items.
Hope its clear.
Aktar

Adding one more tab in apex 4.0??

Hi All,
In my home page, i already have a Tab thats having four different name.When i click on that name its navigating to four diffrent page
I want to add one more tab below the existing Tab,The new tab should contains these there values Home,Report1,REPORT2 when I click Report1 it should navigate to page 3 and similarly for remaining names.
I tried to create a new tab set as well as new tab..but that’s getting added in the same Tab. I have changed the Page template as Two level Tabs also but then also not getting resolved , do I have to set any properties?
Thanks & Regards,
Ramya.

Ramya,
In the next line exactly below the first tab i want these values should be added as a Tab(Project1,Project2,Project3,Project4)Should be at Tab Level 1
In the next line exactly below the first tab i want these values should be added as a Tab(Project1,Project2,Project3,Project4)Should be at Tab Level 2
In the Next line right below the Project4 i want to Display these two values(Project 4 interface ,Project4 Report) as two sub tabs at the third level .Can be a List
Jeff

Double sided VPC- adding one more pair

I have 2 pair of 5k connected in double side vpc configuration. can i connect one more pair of 5k to the existing domain ?

Hi,
I don't see any issue with double sides vPC between two pairs of 5Ks. I think, the reason you don't see it often is because usually you have a set of 5ks with vPC as layer-2 and a set of 7Ks as layer-2/3. Of course you could use a second set of 5Ks in place of 7Ks and use them as layer-2/3. This is with daughter cards installed on 5Ks.
HTH

Information needed on having one more CEN system for the monitored systems

Hi Everyone,
I need some information regarding configuring of one more CEN system
system for the systems which are already being monitored by another
central system.
1) Do I need to register a new CCMS agent on the monitored system for the NEW CEN system again. As I already have sapccm4x registered in the monitored system for the old CEN system, which i think can't be used for the new CEN system.
If I can go with configuring NEW CEN system for the same monitored systems, can you tell me how should I proceed.
Can anyone help me by providing the information for this issue.
Regards,
Bharath Kumar.K

1) yes you can use DSL with what you have, but you want more RAM and I would recommend getting OSX.3 or above because the web browsers for OS9, which I assume is what you are running, are a bit dated and not well supported any longer.
2) Yes you can add more RAM. The 64meg stick in there can be removed. You can add up to 1 Gig of RAM via two 512Mb PC100 or PC133 DIMMS.
See here: http://tinyurl.com/qdlo3
I would add at least 512 Mb if you use OSX and no less than 256 mb if you are using OS9
3) No you can not use CD-R or CDRW with the hardware you have. That iMac only has a CDRom drive and can not burn CDs. You can buy an external CD burner if you want to back up to CDRs
PS: You may want to remove your serial number from your post. Granted the warranty has expired but there's no need or reason to list it.

Code for Custom Workflow to auto approve the task

Hi All,
Can any body help me with the java code to complete the Auto Approval Task.in OIM 11.1.1.5.
Thank you

1. Get the requester information from the payload. (In the Oracle sample the request Id is brought from the payload, similarly you can get the requester id and etc).
2. Get the target user information from the payload along with target user's manager.
3. Set the data from the two above into global variables and copy them into your .task variables.
4. In the task use two serial stages and inside the stage use the skip rule condition with the variables from step 3.
-Bikash

No more notifications icons (on the task bar, bottom right)

Hi
I have had a problem for 3 days, I have no more systems icon in the notification zone (such as volume or wifi connection). Even in "property of the task bar", cases to display those icons are gray and I cannot fill them.
I tried to contact Microsoft support but they told me to contact Lenovo. But there is no support from Lenovo exept this forum...Hope someone from the support team will resolve my problem here.
Thankx
Quentin

Thankx for your answer
My OS is Windows Vista, and yeah all my system Notification icons exept the clock have disapear.

IMovie - I have video interview and added photos. I want to add sound to the photos. They are at the end of the video. I added one free music sound over the start of the photo section. How do I continue to add music to the following photos?

iMovie 11 Version 9.0.8
My iMovie starts with an taped interview then I added photos.When I added sound it went over the video, so I moved it down over the photos. I want to add more sound (music) over the remaining photos. How do I insert background music at a specific area?

iMovie 11 tutorials:
http://help.apple.com/imovie/
http://www.apple.com/ilife/tutorials/#imovie
and also these:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface

Assigning USER values in the task of workflow

Hi Experts ,
I am using the USER option in the task to sending workitem to the perticular user which i have given in the user option .
I am doing this in development .
When i will move my workflow to Production then if the user id which i have given in develpment will not be present in production then my workflow will not work there .
And in production also we may not change the user id ,
so is there any way through which we can able maintain the userid values in production .
Note : I want to use the USER option in the task not through the expression option .
thanks
sarmistha

Hi Sarmistha,
Please check this PDF for Adhoc assignment to workflow which determines agents dynamically..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5023ddbd-de8d-2a10-d7a2-c9910d1ed6ad
Check this link which also gives you help in assigning agents at runtime using Adhoc step in Workflow
http://****************/Tutorials/Workflow/adhocAgent/Assignment1.htm
Hope this would help you.
Good luck
Narin

Adding one more field to the Base line price screen (MEk3)?

Hi,
Now we are entering the base line price for each material.
My requirement is
1) Ability to enter in baseline prices by part by supplier.
If no supplier is entered then the baseline value applies to all suppliers. If a price needs to be recorded specific to a supplier, then the supplier code must be entered. Thus, a part may have two entries (one for all suppliers, and one or more for each unique supplier that needs to be recorded).
How to proceed for this requirement..how to start ...please help me..is this config change or code change..or it is related to custom or standrard change?
please help..

Hello,
You can define access sequence (SPRO->Materials Management->Purchasing->Conditions->Define Price Determination Process) for the condition type to look at Vendor/Material level and Material level in the sequence. Please make the access Exclusive so that no further search is carried out once a condition record for Vendor/Material level is found.
Thanks,
Venu

Adding one more table to the select statement joining 4 tables gives dump

Hi All,
There is a select statement using which four tables namely VBAK,VBAP,LIPS and LIKPUK(view) are joined(inner join).Here, date and time fields are selected from LIPS and used.
My requirement is to consider the Date (LIKP - WADAT_IST) instead of LIPS-ERDAT and time(LIKP-SPE_WAUHR_IST) is to be used instead of LIPS-erzet.
Neither LIPS nor LIKPUK contains time(SPE_WAUHR_IST) field. And, I cannot remove LIPS table or LIKPUK view as each contains a unique field which is used in the report.
When I tried to join LIPS in the select query, it is going to dump.
Can someone suggest a good approach ?
Thanks,
Pavan

Thank you for the detailed explanation of the dump.
The dump details together with your code lead to the answer: 42.
Regards,
Clemens

Adding one more participant to approve the task in workflows

Similar Messages

Maybe you are looking for