Adding pages, and "jump to" at end of clip play

I have 2 questions here:
1) When a movie with dozens of clips/markers is sent from iMovie to iDVD, there are multiple "pages", with arrows going backward & forward at the bottom of the current page. How do I add the "Forward" arrow to the next page manually? I've tried using submenu's, but it doesn't work quite the same way.
2) As above, when sending a movie from iMovie (at least in "Magic Movie" mode) when one clip ends, the next clip plays automatically. How do I do that when manually adding clips to iDVD?
Thanks for any help!

Thanks a bunch - i just found it hee hee

Similar Messages

Adding transitions and titles: no choosing ends of clips?

Hi there,
Does anyone have a clue about the following:
When setting a theme you can choose to tick the box 'add transitions and titles'. According to the tutorial you should get the following options about the end of clips in your projects:
- Overlap ends and shorten clip
- Extend ends etc.
How come I do not have this option? I'm working in Imovie 8.0.6.
Any suggestions? I would like to use these options now and then...

This was an option in iMovie 08, but it was removed in iMovie 09.
The current behavior is that it overlaps ends and shortens the clip. This is the way you would want it to behave for video. After you painstakingly edit out Uncle Joe picking has nose at the wedding, you don't want a transition to put the nose-picking back into your movie. The overall length of the movie stays the same.
For photos, it was useful to have the option of extending or overlapping and shortening. But this is no longer an option as far as I know.

On my ipod touch my songs start in random places and jump to different places as it plays, the remember position is not ticked can anyone please help?

On my ipod touch my songs start in random places and jump to different places as it plays, the remember position is not ticked can anyone please help?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

1. Why don't you purchase it from Apple? I'd be wary with eBay sellers - and, after all, Apple posts their stuff everywhere, even if you live in a country without a localized Apple store webpage or local (physical) Apple stores.
2. when it comes to adapters / cables like these, NEVER purchase ANYTHING non-Apple-manufactured! Most of the cheap(er) knock-offs don't work! That is, don't try to save on going for a cheaper alternative - it most likely won't work.
Here are the links:
http://store.apple.com/us/product/MD098ZM/A
http://store.apple.com/us/product/MC552ZM/B

Adding pages and picking up existing CSS

I am working with a one page sales letter web site that I had someone put together for me in Dreamweaver. I want to add some content pages to it to beef up SEO. How do I pick up the CSS from the first page and apply it to rest of the pages? I have defined the site in a folder and added the additional pages there. thank you, Mel

In between the <head> </head> tags, insert:
<link rel="stylesheet" href="../your/path/to/stylesheet.css" type="text/css" media="screen" />
...making sure that the href points to the correct file path to your CSS stylesheet.

Adding pages and Text Frames to emulate the behaviour of "Smart Text Reflow"

I am creating a large number of tables in a document. If I have Smart Text reflow turned on, my script does not work properly. I have the start of the processing:
1. Add a new table
2. If the last page text frame overflows then Add a new page
With smartTextReflow turned off, I want to ensure that new text frames that match the primary text frames from the master page. It has to be able to handle getting the parameters from the left/right page text frame.

I have been able to solve my problem. I was really overthinking things!!!
Since I have designated the text frames on the master pages as primary text frames, when creating a new page, a text frame is created automatically. So the problem is then just link the previous text frame to the text frame that was created when adding the page.
TableAutomation.prototype.AddPage = function() {
     var previousTextFrame = app.activeDocument.pages[-2].textFrames[0];
     var np = app.activeDocument.pages.add();
     var textFrame = np.textFrames[0];
     previousTextFrame.nextTextFrame = textFrame;
The cost of the above code was about 5 hours of banging my head against the wall

I have Windows XP SP2 and when I load firefox 4 beta 8 it just sits trying to load the page and I have to end up killing the process. What is the problem?

When I start firefox 4 beta 8 I had it set to go to www.google.com. The pages comes up but then Firefox just have the green circle going endlessly and the web site never finishes loading. I restarted firefox 3.6 and it has no problems at all. I tired Chrome and Safari and have no problems using their browsers.

It is not a Firefox problem. It is a BSNL Broadband problem. They are automatically redirecting all users to motive.bsnl.co.in whenever they restart their modem/router.

I checked my device from tmobile simock page and My contrat is end of yesterday. What should ı do for unlocking my iphone 4 ?

Hi, My name is Mehmet Adıgüzel. My email adress is [email protected] My device's tmobile contrat was nd of yesterday and I checked my ımeı number via tmobile.de simunlock web page. But I connected my device and restore it but my device is not unlocked now. can somebody help me please ?

ı know that but they said it will be unlock after 48 hours on 8th november. was it true ? today is 15th november. it is too long... !!!

When replying to a message. MY response is on the bottom of the page, I would like it to be at the top of the page and not at the end.

When replying to a message, my response is on the bottom of the note. I would like to see my response on the top, which the reader would see first. Is there a way to make this happen each time I respond ?

https://support.mozilla.org/en-US/kb/reply-above-or-below-quoted-text

End of clip play from beginning.

When playing the last clip to the end... it jumps to the very beginning and starts playing from the very beginning.
What is the trick to turning off this feature?
Thanks Marv.

I've had similar in other Adobe programs recently. In PS the All Caps button kept getting turned ON in the Character Palette. I have never used it, and took a moment to sort out what was happening. Within the week, three others had the same problem in PS. At least I had the quick answer. All swore, like me, that they had never touched that button. Phases of the Moon?
Glad Colin helped you out. Now we all know to watch out for the "phantom button pusher!"
Hunt

How can I eliminate the toolbar that comes up every time I swith websights and says Firefox prevented this page from automatically redirecting to another page and when nothing comes up I have to hit ALLOW and most of the time it screws me up

I am running OS10 on a MAC and every time I go too another web site (most of the time) a new tool bar pops up that says " Firefox prevented this page from automatically redirecting to another page" and on the other end I must hit the button ALLOW because it is usually screwing me up and Iwant to disable it or use another browser

Options > Advanced > General, un-check "Warn me when web sites try to redirect or reload the page"
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Page and Tab create error

I am getting PAGE_CREATE error while adding a new page. On create new page, after filling page name & description it displays the error message below.
I am runing iAS9\Portal 3.0.8.9 on Win NT4.
No installation errors.
Exact error message:
=======================
ORA-01086: savepoint 'PAGE_CREATE' never established
ORA-06512: at "PORTAL30.WWPOB_PAGE_EDIT", line 320
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL30.WWPOB_API_PAGE", line 340
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-01400: cannot insert NULL into ("PORTAL30"."WWPOB_PORTLET_INSTANCE$"."PROVIDER_ID")
ORA-06512: at line 8
=======================
Recompiled all packages\package body (there are no 'Invalid' packages) - error still persist.
when this error occurs, portal displays error message on adding a tab (it happens when I click on the tab icon to add a new tab):
Exact error message:
=======================
Portlet Information could not be obtained. (WWC-44334)
An unexpected error occurred: ORA-06550: line 1, column 34:
PLS-00103: Encountered the symbol "." when expecting one of the following:
( - + mod not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string>
The symbol "." was ignored. (WWC-43000)
=======================
Everything else in Portal is working fine.
All Rollbacks are online, no error message in the DB alert log.
Any suggestions on how to fix this (other than re-installing portal).
Thanks.
null

Well ... this appears to be a serious problem with the Portal as it renders it incapable of adding pages and tabs. I've tried reinstalling it on 3 different servers, used another instance of Oracle database, and the result is still the same. No installation errors, and suddenly after 7-10 days this error starts appearing.
Am I the only one experiencing this type of error? ...and can anyone offer\suggest ways to fix it?

Crashes in Indesign CS5 related to New Pages and Smart Reflow

Anyone else having problems with page related crashes (linked to the LAYOUT ADJUSTMENT.APLN module in ID CS5 on Windows 7 x64, according to the crash report). I get regular crashes when text or table overflows and a new page is created using Smart Reflow, or when manually adding new pages via the New button on the Pages panel. The latter seems to be linked to clicking the new page button repeatedly to create several new pages.
I am working on a document created in CS4, so this might be the cause. I tried to recreate the crash in a new CS5 document, but was not able to, although I could not get Smart Reflow to work either when Limit to Master Text Frames is unchecked.
J

I have the same, several files created in CS4 (with texts imported from Word). The files crashed in CS4, and CS5. CS4 Windows and Mac, CS5 Windows 7. It definitely has to do with adding pages and overflowing text, exactly as stated. I was not happy to buy from my own money this very expensive software to have it crash 20 times the first day I used it. And at least a 100 times on the third day. That felt like Windows 3.1 to me. You have to know exactly what to do not to let the program crash. I spend 9 hours on figuring out how to get all the hundreds of hours of work back from my crashing Indesign. I managed to get from completely unstable (crash every minute) to workable stable (10-20 crashes a day). I could now write a manual on workarounds "how not to crash CS5", yet cannot prevent all crashes (yet). Expensive software like this should definitely be better at preventing crashes. I still am sorry I didn't keep to MS Word! It works and crashes less than 5% of the time that Adobe does. Has less features, yet does basic features better (like footnotes, autonumbering etc). I have a very serious deadline and Adobe keeps on crashing.
Oh, and YES of course I export to IDML. Spent more money on OT fonts because I didn't trust my TT fonts. Googled like a madman for solutions. The went back to Zen and not sleeping just to get my book to the printer.
Do I sound frustrated? ;-)

Displaying one field in first page and other field in last page (header)

Hi
We are using following way to print headers but we need one field (WO START) to display in first page and another field (WO END) to display in last page
If output is only 1 page then both needs to be printed on same page
<?for-each@section:G_WORK_ORDER?>
WO START This needs to be printed on first page only
WO END This needs to be printed on last page only
<?for-each:G_OPERATION?> <?end for-each?>
<?end for-each?>
Let us know if any fix for this
Thanks
Kamalakar.G
Edited by: kamalakarg on Sep 21, 2012 4:53 PM

Hi Kamalakar,
Send me sample XML data and RTF template i will try on my side. email me [email protected]
Thanks,
Omkar Deshpande.

How can i stop Pages and Numbers JUMPING ALL OVER THE SCREEN. MAKING ME SEASICK! PLEASE HELP

how can i stop Pages and Numbers screen JUMPING ALL OVER the place when i just touch my mouse. i have tried and tried to change the mouse settings - but it is the software. especially Numbers. you can't even see what the page size is until you print. i am so SEASICK! PLEASE HELP.

Thanks for the trouble to reply. this problem only happens with Pages and Numbers for me. i have done all the tricks like restarting. the main problem is that the working space is not 'stable' - it has no 'ends' even on full screen. in Numbers - UNLESS I SET IT TO 25% VIEW (which is way too small) - the actual total 'work space' is way off the grid - so every time i move the mouse the table i am working on zooms off to left or right, at the slightest touch. i have set my mouse to no gestures!
the thing is this did not happen before the latest upgrades.
but thanks anyway. SG.
if you are a techy person - i have another prob. in Mail i am unable to set the SORT / VIEW messages to BY DATE.
(it used to be ok, at one time, too). now it continually reverts to BY SUBJECT oh so annoying !
restarting etc does not change it. resetting preferences does not change it.
maybe i need a new Mac ?
mine is a 27-inch, Mid 2011. running latest.

Adding pages, and "jump to" at end of clip play

Similar Messages

Maybe you are looking for