Adding Personnel Name to Actions Infotype

Hi,
I am trying to add Peronnel Name beside the Pers. No. on the screen of Actions Infotype for PA30.
Any help and advise would be greatly appreciated.
Thanks.
John

As per your answer
Infotype 0000, Screen Header 00
Infotype 0001, Screen Header 03
Now check V_582A_B whether these entries are
0000     Actions                                     00
0001     Organizational Assignment     03
If yes
Now check V_T588I whether these entries are
00     A     00
00     B     00
03     A     03
03     B     03

Similar Messages

Termination Actions Infotype in Personnel Administration

Hi Cronies,
My Client requirement was It shouldnt perform Termination Action Until and unless employee deposits company belongings So what I did was I have created a custom Infotype as Assets Handover Infotype (9001) and I have added in Termination action
While performing Termination Action Action Infotype is displaying first I dont want to display action infotype first I want to display assets handover Infotype first so that User can complete Assets Handover activities and then it should delimit action infotype How can I achieve this I have added In Infogroup as assets handover first after that action infotype still I can see Acton Infotype first please let me know how can i do that???? I want assets handover infotype to be displayed first and after that It should display action infotype
Edited by: My SAP Cronies on Jan 16, 2012 6:56 PM

I want Custom Infotype to be displayed first before action infotype. See I dont want to delimit the position. Action Infotype is appearing first, when we delimit it will take next infotype in Termination.
Instead of action infotype to be displayed first I want Custom Infotype to be displayed first so that User can check that Infotype for employee belongings to be deposited before terminating How can I do that? please let me know about this how can i do that
Edited by: My SAP Cronies on Jan 16, 2012 8:22 PM
Edited by: My SAP Cronies on Jan 16, 2012 8:23 PM

Reg: Adding Country Group 99 for Infotype 9

Hello Guru's,
Can anyone help me with adding a New Country to Infotype 0009 (Bank Details).
1. In Component FPM_OVP_COMPONENT - Application HRESS_A_PERSINFO - Created a Application Configuration(AC)
2. Started the AC and gave Component Configuration(CC) to go to the applications for Bank Details
3. Go to Edit Page - Bank Details edited the Wire Schema for HRESS_CC_PER_DTL_BANK_XX to use Custom Config id created for FPM_FORM_UIBB and FPM_LIST_UIBB
4. In the General Settings - Floorplan Settings - Application Controller Settings - Changed the Configuration Name to Z configuration name which was created for Component HRESS_C_PERSINFO_CONFIG
5. Component HRESS_C_PERSINFO_CONFIG is used to link the custom Component Configuration created where the masking is done.
Created 2 Component Configuration for FPM_FORM_UIBB for US and UK and within the Component Configuration created for HRESS_C_PERSINFO_CONFIG replaced to open the link for US and UK.
6. Component Config for HRESS_C_PERSINFO_CONFIG is missing the configuration for Country Grouping 99, so created an entry for Other Countries and assigned the US Component Configuration to open.
Note 2035081 - How to add a custom infotype to ESS 'Personal Profile' in WD ABAP
I couldn't find any document or note to add a country to Infotype.
Please help me.
Thanks,
Pramod

Hi Siddharth Rajora,
When using GENIL_MODEL_EDITOR to add the Dependent Object and activating the changes, it is giving error on other Dependent Objects which are not been touched.
Below is the error I am getting when saving the entry.
Let me know if there is anything else I am missing.
Thanks,
Pramod

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

Making Employment status field editable in Actions infotype

Hi All,
Can we make the Employment status or Customer specific status editable in Actions Infotype 0000?
I tried doing that in 'Change Screen modification' in IMG, but it isn't working.
Please provide your inputs.
Thanks!

Hi, 
It is not possile to do it.
Each action is assigned the three status indicators STAT1 (customer defined), STAT2 (employment), STAT3 (special payment) in the customizing system.
When a personnel action record is created, the system automatically fills the Customer defined, Employment and Special payment fields if the action affects the employee's status.
The first record of the Actions infotype is assigned the status specified in the customizing system. All other records
have the same status indicator as the new personnel action if this is not BLANK in the customizing system.
have the same status indicator as the previous record if this is BLANK in the customizing system.
This applies to all three indicators.
Can you let us know the business need or requirement to do it??
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

Adding Company Name to Flash Website

Hi Everyone,
I have a question about Flash CS3. When I search for my
website on Internet Explorer, the web site link comes up, but
instead of the link stating "FranchelleDesigns", it says
"Index". I tried adding my Company name to Action Script, but
it does not work, it just gives a code error under the
website link.
Can anyone assist?
Thanks in advance for your help!

Contref,
I apologize for that outburst. It was uncalled for and
unprofessional of me. Please accept my apology. I will try to
explain it another was so you might understand.
I think your problem stems from a lack of understanding of
the publishing process, not from an ignorance of the Flash
development environment. That said, let me see if I can give you
the 40,000 foot perspective.
When working in a development environment, you work on what
we call LOCAL FILES. These are files that reside on your computer
or local network. When you have finished development (and sometimes
before you finish) you do what's called PUBLISHING your documents.
(Note that this is different than the Flash menu option Publish -
that only compiles the FLA file into a SWF file and creates the
HTML file). By this we generally mean you upload these files to
some web server somewhere on the internet. To make this perfectly
clear, this means you will have two copies of every file - one on
your computer, and one on the internet server. When you edit the
file on your computer and save it, unless the file is locked for
some reason, there is no reasonable way that file will 'roll back'
to a previous version without you being told it is happening. The
file could be set to READ ONLY, which would prevent you from saving
your changes, but again, you would be told that with a pop-up box.
Hopefully this explains why some of us are so confused as to your
problem.
One other possible problem I can see happening is that you
are editing the source that you get from the internet (like in your
browser going to View => Source" and editing that file, then
saving it and refreshing the page. What you would have to
understand in this case is that every time you view the source and
change it, you are viewing what's on the web server and saving your
changes to your local computer. This is fine except that you have
never uploaded the modified code to the web server and, thus, will
NEVER see the changes you have made. Please note that all of this
is done in applications outside of Flash and really doesn't have a
place in these forums, but that's OK. We will still help you out.
There are two ways to get pages to a web server. Some hosting
services offer a web-based file upload application (iX Webhosting
and MySpace photos are good examples of this). The other method is
to use an FTP (File Transfer Protocol) program. Examples of this
are CuteFTP, CoreFTP - but there are hundreds of these applications
that you can use. I've only named two.
Now, there are four files that encompass the Flash file:
1. The FLA file. This is the un-compiled, native Flash
document - the one you do all your editing to.
2. The SWF file. This is the compiled Flash file that will be
uploaded (published) to the web server.
3. AC_RunActiveContent.js. This is a file that must be placed
on your web server along with the SWF and HTML files. This is a
script file that examines the users computer to determine which
version of Flash Player has been loaded onto the users computer.
4. The HTML file. This is the main 'page' that holds your SWF
file. It also contains what is called Meta Data - of which the
title of the page is a part and contained withing the <TITLE>
</TITLE> tags.
Now that I've covered the content, let's look at the general
steps required to publish your page:
1. Create your flash file and save it to your hard drive.
2. Select Publish from the File Menu - this creates the SWF
and HTML files and puts a copy of the AC_RunActiveContent.js in the
directory with those other two files.
3. Use a text editor like Notepad or UltraEdit to open the
HTML file. This file will be in the same directory as your FLA and
SWF files and will have the same name. Example: if your named your
FLA file "Home.FLA", you will also see "Home.SWF" and "Home.HTML"
4. Add the line <TITLE>My Page Title</TITLE> to
the HTML file just below the <HEAD> tag.
5. Save the file and exit your text editor.
6. Open the web servers file transfer application OR your FTP
application and log into your server.
7. Upload the HTML, SWF and JS files to the server (making
sure they are in the proper directories).
8. Use your browser to view the web site.
I think that is as plain and as detailed as I can possible
answer your question. If that doesn't solve your problem, you need
a better man than me. Again, I apologize for my outburst.

Resignation / Reliving deletion log data in actions infotype 0000

Dear all,
When we delete resignation/relieving entry in Pa30 in actions infotype 0000 no log is maintained.
where i can see the deletion log please help.
Regards,
Gaurav sood

You have set the indicator in Table: T529A. for the field U0000 for the leaving action.
If you set the indicator U0000, the personnel action type is stored in the Actions infotype (0000).

SAP Query to join action infotype with additional action infotype

We have created SAP Query on PA0000 which shows all actions that are executed for an employee.
The problem is that if two actions are exceuted on the same day then it shows only one action instead of showing both the actions.
As two actions are executed on the same day it will be stored in additional action infotype(0302).We tried to join PA0000(Action infotype) with PA0302(additional action infotype) in SAP Query by using joins(inner join/outer join) but it shows duplicate records.
Is there any way to get additional action along with records of action infotype without any duplication in SAP Query.

All entries that are in PA0000 will be in PA0302, but not vice-versa so you just have to reverse what you are currently doing, i.e.: create a Query on PA0302 and join to PA0000, and then make sure your selection criteria is from PA0302 and not PA0000.

Adding file name in the sender Adaptor

Hi ,
I am facing some problem in adding file name .
The scenario is like this :
The file needs to be send from on system and needs to be Archived . Once processed, the archived file should be prefixed with ARCH_ so that it is not picked up again .And the other thing given is the file name used will be of the format XXX_YYY_nnnnnnnnnn.DAT where nnnnnnnnnn is the date stamp .
Please help it's urgent ......
Thanks and regards
Anita

Hi,
if you can have XML achvived files you can use
standard
processing mode: Archive
with one swich you can set the timestamp mode
yyyMMdd-hhMMss-SSS_.
ref
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
michal

Need helpcreating a script to read the name of a folder and adding that name into the permissions of that folder

Need help creating a script to read the name of a folder (which is the AD Username) and adding that name into the permissions of that folder.
I have over 100 folders which I need to add the AD user to read and write to their own folder
Hope you guys understand what I mean

Just to add, Mac in intergrated into AD and all I need is help in creating the script
Thanks

Getting name of action from action guid

Hi ,
Can we get name of action excuted from the action guid generated at runtime ... is there any table or someway we can get this ?
Thanks Vaibhav

Hi,
You can refer the table PPFTTRIGG in CRM.
This will list the action profile and action definitions based on the GUID details.
Regards,
PP

Query to retrieve data from action infotype based on particular actiontype

Hi folks,
I need some help in retrieving data from infotype 0000.
The records for a certain employee id (10035532) for action infotype are as follows.. I trying to retireve the LOA action records
   BEGDA-ENDDA-MASSN-MASSG
1. 04/01/2008 - 12/31/9999 - Z7(RLOA) - 02(FMLA).
2. 03/01/2008 - 03/31/2008 - ZB - 03.
3. 02/10/2008 - 02/29/2008 - Z2 - 05
4. 01/20/2008 - 02/09/2008 - ZB - 07
5 01/05/2008 - 01/19/2008 - Z5(Paid LOA) - 05(FMLA)
I have to retrieve the Z5 record for this employee. For every Z7 there is a corresponding Z5 record that links to the LOA records, in most cases the Z5 is immediately followed by Z7 record. I am able to retrieve such records successfully. However for few employees like one here the Z5 record is the fourth or fifth record down from the Z7. How can i retrieve the record in such a case?
Also in some cases the date ranges are missing in between, in such cases can we retirieve data succesfully? For ex:
1. 04/01/2008 - 12/31/9999 - Z7(RLOA) - 02(FMLA).
2. 03/01/2008 - 03/31/2008 - ZB - 03.
3. 02/10/2008 -                   - Z2 - 05
4. 01/20/2008 -                   - ZB - 07
5 *01/05/2008 - 01/19/2008 - Z5(Paid LOA) - 05(FMLA)
Need some inputs on the query here.
Thanks in advance,
VG

No responses. The thread is closed.
VG

After upgradataion ,In testing phase- after search ,in result view we are getting some unwanted data ' +++++" should be added in Name .how to remove it.can you please help.

Hi Team,
After upgradataion ,In testing phase- after search ,in result view we are getting some unwanted data ' +++++" should be added in Name .how to remove it.can you please help.
I want to remove ++++ in that column.

Hi Kalpana,
Please provide additional information for community users to relate this issue. Info like versions (old & new), the object which has this problem or component/view name will be useful to get the answers.
Regards,
Shobhit

[svn] 4286: Bug: BLZ-282: added property name to debug info for Map serialization

Revision: 4286
Author: [email protected]
Date: 2008-12-10 18:29:26 -0800 (Wed, 10 Dec 2008)
Log Message:
Bug: BLZ-282: added property name to debug info for Map serialization
checkintests: pass
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-282
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java

Guo,
I see a question mark in the sql statement, instead of the Oracle-style bind parameter notation which would be ":1". Can you change your VO to use Oracle-Style bind params and see whether it works?
Steven Davelaar,
JHeadstart Team.

Forms Personalization -document for different 'Property Name' on Action tab

Hi,
I am trying to find document which contains meaning of different 'Property Name' in Action tab, while in form personalization screen. I had searched for document but no luck.
Please let me know the link for such document.
Thanks,
Atul

Hi Sandeep,
I am looking for default value only but INITIAL_VALUE does not work in EBS. Here property name VALUE is working for default value. Hence, the confusion for usage of INITIAL_VALUE in EBS.
Although I know INITIAL_VALUE works on Oracle Forms but same does not apply in EBS forms personalization.
Regards,
Atul

Adding Personnel Name to Actions Infotype

Similar Messages

Maybe you are looking for