Adding photo's - 'photos' tab not appearing under device

I am trying to add some photos to my ipod touch in itunes. When my ipod appears under devices, I expand it but there is no photos tabe, just music, films etc. Any ideas?!

Yo need to select the iPod in iTunes then select the Photos tab across the top, not the folders on the left side of iTunes.

Similar Messages

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

Welcome to the Apple Community.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

Not appearing under devices

When I connect my iPod Classic, it does not appear under devices. I do have it on my iMac desktop, so I think the USB is working properly. The iPod also will connect to my PC with no problem; I synced yesterday evening. I have the latest iTunes on both computers.
Any ideas?

See here: iPod does not appear in iTunes or iPod updater in Mac OS X
And here as well if necessary: iPod not recognized in iTunes and Mac desktop
Did it ever show up previously? If so, what has changed then? Have you recently installed any third party software/plug-ins/etc.?
B-rock

My iPad does not appear under "devices" in iTunes

When I connect my iPad 2 to my PC (Windows 7), it does not appear under "Devices". I have tried all the steps described in "Trouble-shooting". It does, however, recognize and show my iPod nano, when I connect that through the same USB. I have already deleted and reloaded iTunes 10.4 three times. Incidentally, I had no problem when I was using previous version of iTunes before I updated it 5 days back.

Thanks Rudegar.
Finally what worked? I removed all the Apple software files from my PC. Rebooted my PC. Downloaded iTunes afresh, saved and run it. Ah..ah.. my iPad was under the devices this time and it synchronised well. I am happy. Thanks
Ved

Apps does not appear under devices in itunes., apps does not appear under devices in itunes.

I am trying to get my apps to appear under devices in itunes. They appear in the general library but not under devices.

When you turn on your iPad, you will not be able to see your apps under iTunes - though there is an iTunes Store, which is a different thing. Ito get your apps to appear in iTunes, open iTunes on your main computer and attach the sync cable. Both the general library and devices will appear.
When you disconnect the cable, you won't be able to see Devices.

IPod does not appear under devices in Itunes

These problems started a couple weeks ago: When I connect my iPod classic to my Windows 7 laptop, it doesn't appear under devices in iTunes, but the iPod says its connected. Also, a little blue sheild appeared over the iTunes icon on my desktop. When I click on iTunes, a message comes up telling me to turn off compatability mode before I open iTunes for best results because it was running on an earlier version of iTunes. I've tried switching the compatability around and all of the troubleshooting options possible for iTunes but nothing has changed and my iPod still does not show up in devices. What sould I do?

The blue shield is Windows 7 telling you, to log in as Administrator, it need this higher priviledge to add devices like your iPod to the Machine.
Perhaps, you can go to Microsoft forum, for the how_to override. (must be install and run iTunes as Administrator)
Have a nice day!

Bi Publisher tab not appearing under Excel 2010

Hi,
We have a problem with my team when trying to use BI Publisher in Excel.
We use Microsoft Office 2010 under Windows 7 configuration.
It is working fine with Word : we use it often and the installation worked fine. The tab in Word appeared at first use. But when trying to use it with Excel, the tab is not appearing. We checked in the Add-ins options of Excel, we do not see any new add-in such as "TemplateBuilder.dot" that we see in word. There is also nothing in the "Disabled item" list.
Can please someone help us ?
Thanks a lot !

If you cannot show the BI Publisher Macros in Word :
1.     You have to uninstall the BI Publisher desktop
2.     Install the BI Publisher as (Right-click on the "Command Prompt" item and select "Run as administrator".)
3.     If you cannot show the BI Publisher macros and in word options show TBmenu as disable you have to do :
4.     Click the Microsoft Office Button , click Word Options, and then click Add-Ins.
5.     In the Add-ins box, identify the add-in that you want to enable and note the Add-in type located in the Type column.
6.     Select the Add-in type in the Manage box and then click Go
7.     Select the check box for the Add-in that you want enable and then click OK.
8.     Close the word
9.     Reopen the word , than appear the BI Publisher
Azita

SD card does not appear under "Devices" as it used to - cannot import.

Helping to remotely troubleshoot an issue with my dad's iMac. Basically, he has always put his SD card into the slot, iPhoto opens and it prompts to import. Something has changed (presumably he did not cause the change ) and now what happens is that iPhoto opens, however the card is not showing up under "Devices" - thus there's no prompt to import. I TeamView'd into his computer to see for myself what was going on, and sure enough, the card does appear on the desktop (and in the Home window under "Devices") but there's no sign of if under the Devices list in iPhoto.
Any thoughts? Thanks in advance.

And for the future a good workflow is to import your photos keeping them on the SD card, properly dismounting the card and after at least one backup cycle has successfulluy completed reformat the card using the camera - this protects against lost photos due to problems and keeps the card format fresh to minimize problems
LN

TS4006 My new iPad will not appear under devices.

I only have 3 items in the devices, but my new one is no where to be found. I have followed all the directions, but still no success!

I can't see it on my iPhones or other ipad.

How can I make my iPod touch 2G appear under "devices with removable storage"?

My ipod always appears under "portable devices" under "my computer". I use Windows 7. I want to know why it does not appear under "devices with removable storage". I manually manage its contents. Please give any suggestions that may help. Thanks!

- Because via My Coputer yu can only access the the photos (DCIM folder) taken by or saved to the iPod. The iPod touch (and iPad and iPhone) do not have a disk mode like other iPods)
- You need a third-party program like SharePod to access music w/o iTunes

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

Apps downloaded in iTunes Store do not appear under iTunes Apps tab

Apps downloaded in the iTunes Store (either as updates to existing apps or as new) do not appear under the 'Apps' tab in iTunes.
iTunes requests my Apple ID and password and the files will download afterward. However, they do not appear in the 'Apps' tab. This is confirmed by right-clicking >> Get Info. No update to the version and new apps do not appear.
Of note, I am running Lion an iMac 3.06 Core 2 Duo w/ iTunes 10.7.
My iTunes Library is located on a Mac Mini Server running Lion Server. I've checked permissions and every folder and library file is set to 'Read & Write' so it doesn't appear to be a permissions issue.
Any ideas?

Also, I've tried individually downloading an app flagged for update in iTunes without any luck.

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the first generation ipad.

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Shipping tab not appearing in PO

Dear Sir,
I hv made all the relevend configuration and vendor creation for PO but still shipping tab not appearing in po.
I dont know wht step i hv missed out, please advise what should i do.
Looking forward for your quick response on th same.
Regards
Parul

Hi Parul
Pls check the following settings.
1.     Define receiving plant for sto. (Storage location also for this plant if required).
2.     Assign receiving plant to company code.
3.     Assign receiving plant to the supplying plants sales org, distribution channel.
4.     Assign shipping point of supplying plant to receiving plant.
5.     Maintain purchasing organization and assign it to receiving plant and company code.
6.     Create receiving plant as a customer in supplying plant (normal customer creation).
7.     Define shipping data for plants: imgu2014mm-----po-----setup sto.
                     Select receiving plant and assign customer number (previous step number)
                     Assign the sales area of supplying plant.
                     Select supplying plant assign the sales area of supplying plant
8.     Assign delivery types and checking rules (imgu2014mm-----po-----setup sto)
9.     Assign document types, one-step procedure, under delivery tolerance. (same above path)
10.     Extend the material to the receiving plant.
11.     For Second plant assign manual shipping point as of first plant (OVL2)
Br.
Ramana

Results recording tab not appearing in QA32

hi,
can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?

Just check which roles are added to that used id
selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
take help from ur basis guy for this.

Adding photo's - 'photos' tab not appearing under device

Similar Messages

Maybe you are looking for