Adding printer in active directory- in windows server 2008 r2

Is that addition will enhance the printing and the scanning management capability ? how ? and to which extent ?
by example please !!
thank you in advance

When publishing a shared printer to active directory, the machine sharing the printer creates a PrintQueue AD container with information about the print share and the print driver capabilities. There is absolutely no information regarding
the scan capability of the device. AD printqueue objects are not printers, the objects contain the data needed to create a connection to the share.
Alan Morris Windows Printing Team

Similar Messages

Hp deskjet 2545 printer driver not supporting on windows server 2008 r2

I have purchased a 3 in 1 hp deskjet 2545 printer. I am trying to configure in on my home laptop (HCL) operating system: windows server 2008 R2, but unable to configure it. customer support executive told me hp deskjet 2545 printer driver is not compatible on windows server 2008 R2. but I have checked in my office and it is working fine on my office 2008 server. Please help.

Hello Arvindk,
Welcome to the HP Support Forums! I understand you are trying to use your HP Deskjet 2545 with your Windows Server 2008 R2. Because you are using a server your question will be best answered on the Commercial Forums: http://h30499.www3.hp.com/hpeb/
I was able to find this document for Installing the Printer Software on Windows Server 2003 or 2008, which may be helpful for you.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Cannot create Virtual Directory in Windows Server 2008 R2 SP1 Environment

Dear all,
I am trying install Reporting Services 2005 on a Windows Server 2008 R2 SP1 Enterprise machine.
So far we successfully did the following steps
- Install SQL Server Reporting Services
- Configure Service Account (Domain-User)
After creating virtual Directory, we made several steps to avoid HTTP 400 Bad Request in Report Manager:
1. Disable LSA Loopback in Registry and restart server
2. Enhance Service Startup time to 60000ms and restart Server
3. Set Application Pool to ASP.NET 2.0 Classic Mode
4. Modify RSWebApplication.config and set These entries:
<ReportServerUrl>http://servername/ReportServer</ReportServerUrl>
<ReportServerVirtualDirectory></ReportServerVirtualDirectory>
After all the Reporting Services Configuration Manager still shows a red sign and we cannot continue creating the database.
How is it possible to solve this?
We appreciate any help.
Best regards,
Mark
Mark Kuschel
Blog
Xing

Hi Mark,
As per my understanding, we can refer to the following methods to troubleshooting the issue you occurred.
Install SQL Server 2005 Service Pack 3.
Deleting the newly-created virtual directory using IIS manager and then rebooting the server.
In the Report Manager Virtual Directory dialog box, create a virtual directory for Report Manager, then change the Website to Reporting.
Enable Apply default settings.
The following link is for your reference:
http://www.mathgv.com/sql2005docs/SQL2005ReportingServicesInstall.htm
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Upgrade from Windows Server 2012 Active Directory to Windows Server 2012 R2 Active Directory

We are currently running Windows Server 2012 Active Directory and would like to upgrade to Windows Server 2012 R2 AD. Is it OK to just do an in-place upgrade, or is it advisable to build new domain controllers on R2? Are there any guides or articles anyone
can recommend?

Hi Ginandtonic,
To upgrade DC(Domain Controller) from windows server 2012 to windows server 2012 r2, please refer to these articles:
Upgrade from windows Server 2012 to 2012 R2
Upgrade Active Directory from 2012 to 2012 R2
I hope this helps.
Best Regards,
Anna

DNS and Active Directory error 4000 server 2008

Hello all,
My network skills aren't very good and I'm facing a dilemma. First off we have two Windows servers on the network. The newest is 2008 Standard (named Vader) and the other is 2000 (dells3). Obviously I'd like to get rid of the 2000, but the people in charge
of my budget haven't given me the option to do so and it's the only back up we have.
Earlier in the week we had lots of problems. One of our nas boxes locked everyone out who was mapped to it and it would only let me log in through the web portal. Two of our Macs our marketing department uses suddenly locked up and wouldn't let them back
in (both were part of the Active Directory). A second nas box won't let certain people map to it and for awhile I had issues logging into Vader itself.
I believe all of these problems are connected to some issues on Vader and possibly in conduction with dells3. In Server Manager under DNS I get error 4000 "The DNS server was unable to open Active Directory.
This DNS server is configured to obtain and use information from the directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and reload the zone. The event data is the error code."
Then under Active Directory Domain Services I get error 2042 "It has been too long since this machine last replicated with the named source machine. The time between replications with this source has exceeded
the tombstone lifetime. Replication has been stopped with this source."
Followed by more text I can post if needed.
Under File Services error 1202 "The DFS Replication service failed to contact domain controller to access configuration information. Replication is stopped. The service will try again during the
next configuration polling cycle, which will occur in 60 minutes. This event can be caused by TCP/IP connectivity, firewall, Active Directory Domain Services, or DNS issues."
And finally if I try to open Active Directory Domains and Trusts "The configuration information describing this enterprise is not available. The server is not operational."
I'm not sure where to start or what to post that might help. Any and all help is appreciated.
Edit: Also I can only add dells3 as the DNS on Vader in the DNS Manager if I try to add Vader to itself I get an error.

It's the other way around. Overall, I'm advising ripping the 2008 server out of AD and adding it back . Let's look at this as a series of steps:
1.) You do a force demote of the 2008 server because it's tombstoned. This means the 2008 server is no longer a DC. You are doing a force because it doesn't have the ability to replicate. If it could replicate, we'd just do a graceful demotion
and be done with it.
2.) Once the 2008 server is demoted, we go to the 2000 server which holds the only good copy of AD. From that server we run a metadata cleanup using the ntdsutil utility. We use that utility to clean out references to the 2008 server which is
no longer a DC.
3.) Once you have a clean AD, you can then promote the 2008 server back into Active Directory. Make sure Vader is pointing to Dells3 as its primary DNS server before promoting or you'll run into issues.
Hopefully that clarifies things.

User account is removed from a Active directory security group (server 2008 R2) after a day

Hello !
i add many times a user in a AD security group, but the user is removed automatically after a day. What i don't understand is that other users have been added to the same group but they are still in the group (there is no problem with their accounts).
To add this user that is always removed after a day (or a period), i use the member of tab in the account properties.
Right click on the user account -> properties-> member of -> add -> groupName->ok
Thank you for your help !!

Greetings!
Similar thread here which was answered before:
Auditing Acitve Directory group
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Adobe Acrobat 9.41 Pro+ on Snow Leopard 10.6.5 + Network users (Windows server 2008) = CRASH!

Adobe Acrobat 9.41 Pro will work “great” on the admin account, however through the active directory log on of network users, every user gets the long crash report upon opening the application.
Permissions are set so “everyone” can gain access, however the crash issue is not a decent setting on the Mac environment.
Will welcome any thoughts..comments… and suggestions.
Thank you-

OS: Snow Leopard 10.6.5
Active Directory Setup: Windows Server 2008 - Log in for network users
Adobe Acrobat: version crash 9.3 and 9.4.1
Admin of the Mac computer can log in and use the Adobe Acrobat Professional software, however when a network user
Tries to log on the computer and open the Adobe Acrobat 9.3 or 9.4 the software hangs....for 7-8 seconds then displays a crash report, and options are send to apple.
Permissions on every Adobe Acrobat folder on the computer are set to read/write for every user of the program.
Software Type: Using the DVD purchase with the Education program, and the serial number does accept, and download the software from the Adobe web page.
Emma McFaul

How do I run a vb script in Windows Server 2008 R2

Hello,
How do I run a vb script
to generate an OID to create a new element
of a schema in an active directory
in Windows Server 2008 R2?
Thank you for your feedback.
Juan Carlos
Juan Carlos

Hello,
How do I run a vb script
to generate an OID to create a new element
of a schema in an active directory
in Windows Server 2008 R2?
Thank you for your feedback.
Do you have the script yourself? Assuming yes, it is the command:
cscript YourScript.vbs
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Migration on active directory from 2003 to 2008 and SharePoint error Cannot connect to the configuration database.

Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mk

Hiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)

Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_tech

Hi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support

VDI 3.4 Inegrate with Windows Server 2008 R2 Active Directory

OK,I follow the official documents step by step,I installed the vdi 3.4 in Oracle Linux 5.7(oraclevdi.jiayutester.com),then installed a window server 2008 r2 64bit(jiayudc.jiayutester.com) that made it to be the Domain Controller(jiayutester.com) and DNS,at the end,I edit the /etc/krb5.conf.I execute the following commands:
1.getent hosts jiayudc.jiayutester.com
--------------------My Note:Normal-----------
2.kinit -V [email protected]
Authenticated to Kerberos v5
This is my krb5.conf------------------------------------
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/kadmind.log
[libdefaults]
default_realm = JIAYUTESTER.COM
default_checksum = rsa-md5
dns_lookup_realm = true
dns_lookup_kdc = true
ticket_lifetime = 24h
forwardable = yes
[realms]
JIAYUTESTER.COM = {
kdc = space-21pel8ghu.jiayutester.com
admin_server = space-21pel8ghu.jiayu.com:749
default_domain = jiayutester.com
[domain_realm]
.jiayutester.com = JIAYUTESTER.COM
jiayutester.com = JIAYUTESTER.COM
[appdefaults]
pam = {
debug = false
ticket_lifetime = 36000
renew_lifetime = 36000
forwardable = true
krb4_convert = false
Then,I login to the web console to set company, I select Active Directory to use as User Directory,then I fill up all the needed information(I am sure that all the information I fill in the form is correct),when I click the next,error occured....it's the context:
Unable to Connect to User Directory
Failed to connect, no servers available
Now,I searched everywhere for information,but I can't resolve the problem...Please help me,smart guys

Would probably need to see your VDI instance cacao log file to see why this is failing, but you might need to add the following to [libdefaults] section of your krb5.conf file, for 2008R2 AD server:
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
And then restart VDI services (/opt/SUNWvda/sbin/vda-service restart)
Note that VDI will actually try to query individual AD servers as defines as part of your AD Global Catalog when it tries to lookup AD domain data. This means you need to verify that your global calalog referenced servers are valid and having matching forward and reverse DNS information:
For example:
$ *nslookup -querytype=any gc.tcp.vdi.com.*
Server:          win2008.vdi.com
Address:     192.168.1.100#53
gc.tcp.vdi.com     service = 0 100 3268 win2008.vdi.com*.
$ nslookup win2008.vdi.com.
Server:          win2008.vdi.com
Address:     192.168.1.100#53
Name:     win2008.vdi.com
Address: _192.168.1.100_
r$ nslookup 192.168.1.100
Server:          win2008.vdi.com
Address:     192.168.1.100#53
100.1.168.192.in-addr.arpa     name = win2008.vdi.com.*
You'd want to verify that every record returned by the *nslookup -querytype=any gc.tcp.yourdoamin.com* command refers to a server that can be reached and has matching forward and reverse DNS. Otherwise, this may trigger VDI to have failures or delays in performing directory queries.
Beyond that, you need to look in the cacao.log file for errors that you can find and post.
Edited by: DoesNotCompute on Oct 13, 2012 11:48 AM

Install Active Directory Domain Controller on Windows server 2008 enterprise, dont login on Sql Server 2008 R2

I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!

Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support

Adding Printer as a scanner in print service role (Distributed scan server), would it be possible in windows server 2008 r2 !!

Hello All
I have a sharp printer that support scanniing as well and my question is :
I want to getting use from manage scanner service role that is belonging to the print service role in windows server 2008 , which has the feature of passing the scanned document to users shared folders which are exist in the same server.
but when i try to add my printer as a scanner it did not accept .. so i cant proceed with my objective, which is allowing users to pass their scanned docs to their shared folder
Any idea ?

Can i scan to network shared folder without adding the used credentials, i am looking for this distributed scan features for this issue.
now each time new user will come i will create for him a shared folder with his username and password then i will go to the printer web base page and add this shared folder to the address book, but i need the user to come to add his password. how i can tell
the printer to authenticate him and directt his scan to his shared folder without asking him to enter his password to be able to create an address book for him ?? any help
Thanks in advance !

Require list of all events for Windows Server 2008 Active Directory

Hi all,
I require list of all events for Windows Server 2008 Active Directory. Event Log name for Active Directory log is "Directory Service".
Regards,
SR

Hi,
Thanks for your posting.
Do you mean you want to list all Active Directory logs into one file named “Directory Services”?
If that, it’s hard to achieve. There are kinds of Active Directory logs stored in different locations and they have different file formats. It’s hard
to collect them into one file.
Active directory records events in the directory services log in Event Viewer. By default, Active Directory records only critical error events. To instruct Active
Directory to record other events in the directory services log, we need to modify registry.
For more information please refer to following MS articles:
Active Directory Diagnostic Logging
http://technet.microsoft.com/en-us/library/cc961809.aspx
How to configure Active Directory diagnostic event log
http://support.microsoft.com/kb/314980
Lawrence
TechNet Community Support

Windows Server 2008 Active Directory Trust

Hi ,
Can anyone help with the answer to the following questions please?
a) Whether Microsoft Windows Server 2008 SP2 Standard Edition support AD trust relationships (one-way; two-way)
b) Whether we can create trust between Windows Server 2008 R2 SP1 and Windows Server 2008 SP2 Standard Edition AD servers?
Thanks in advance.
India1947

Hello,
First of all, please confirm the firewall on the Windows Server 2008, the TCP/IP filter or any 3 party firewall is not blocking the RPC and ICMP traffic between two domain controllers.
1.    Have a test of creating and verifying trust while all firewalls are all disabled. Then re-create and verify the trust to check how it works.
Allowing Inbound Network Traffic that Uses Dynamic RPC
http://207.46.196.114/windowsserver2008/en/library/d37f96c6-c729-4b29-80a9-88db3d97b8631033.mspx
2.    If it still fails, please try to collect the following information for our further investigation:
-      Run "Netdiag /v >>netdiag.txt" on both DCs
-      Network Monitor trace when verifying the trust:
Download the NetMon3.1 from the following link:
http://www.microsoft.com/downloads/details.aspx?FamilyID=18b1d59d-f4d8-4213-8d17-2f6dde7d7aac&DisplayLang=en
1.    Install the NetMon on Windows Server 2008.
2.    In the Microsoft Network Monitor 3.1 window, click Create a new capture tab….
3.    In the new tab, select all the Network Adapter in the Select Networks window.
4.    After that, press F10 to start NetMon.
5.    In the Active Directory Domains and Trusts, try to verify the trust to reproduce the issue.
6.    After that, go back to the Netmon window and press F11 to stop the Netmon on the Windows Vista machine.
7.    Press Ctrl+S to save the Netmon files.
Please send files to [email protected]
Note:
a. Please include the following three lines for this issue in the email body:
Trust Windows Server 2008 and Windows 2000
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3210801&SiteID=17
Miles Li - MSFT
b. We will continue to discuss the issue here in the newsgroup and will NOT reply via emails.
c. Pease post a quick note in the current thread to inform me after sending the email.
Thanks.

Adding printer in active directory- in windows server 2008 r2

Similar Messages

Maybe you are looking for