Adding punctuation marks above text letters
I frequently use the Welsh language in my letters and e-mails and have not yet found a way of placing the circumflex(^) as a punctuation mark over certain vowels, which can convey a quite different meaning to a word if added or omitted.There is a Welsh option in the Keyboard viewer, but this seems no different to the British version.
The mark(^) is, of course, available on the 6 key uppercase, but how do I place it OVER the vowel in question?
Glad of any suggestions,
Diolch yn fawr!
Hen Gymro.
Caution
It's not sure than a character available in TexEdit may be used in AppleWorks.
TextEdit is Unicode aware while AppleWorks is not.
The chars with a circumflex usable in AppleWorks are:
 â Ê ê Ô ô Û û Î î
Here are some which aren't:
Ĉ ĉ Ĥ ĥ Ĵ ĵ Ŝ ŝ Ŵ ŵ Ŷ ŷ
For my own use, I built a table of favourites for the Character Palette tool.
In this one, I put the "accented" chars usable in AppleWorks.
So I may enter them by a simple drag and drop.
It's a pity but with Mac OS 10.4.x, the good old double click is no longer usable to enter a char from the palette when AppleWorks is active.
Some one decided to disable it because some users complained because double clicking an Unicode character gave an odd insertion.
This is what in France we describe with the formula (throw away the baby with the bath's water).
Yvan KOENIG (from FRANCE dimanche 7 octobre 2007 17:51:57)
Similar Messages
-
Text Prediction and punctuation marks [N97]
Hi!
I've been using 6310i for a veeery long time
Recently I decided to buy N97.
And I have a question concerning the Text Prediction feature.
Very often when I insert a word I'd like to use one of punctuation marks. For example a comma or a full stop.
So after my desired predictive text is inserted I use the "1" button.
And if the punctuation mark is not what I want, e.g. a comma appears and I want a full stop then I press the * button repeatedly to get a desired punctuation mark.
Recently I installed Custom Dictionary application from Nokia Beta Labs.
And when I edited a list of all custom words that have been added I was surprised to see that there were a lot of words with commas, full-stops, question marks at the end of exactly the same words.
So I made some tests.
It seems that when you insert a desired word and you use the "1" button to insert a punctuation mark and then you use * - the words is automatically saved to the custom dictionary with this punctuation mark at the end.
Do you think this is intentional or maybe I am using the feature incorrectly?Thanks guys for your posts!
@The_Funkateer
If you imagine that the same word is automatically saved to the custom dictionary but with various punctuation marks at the end - you have the answer.
You can notice that always the last used punctuation mark is used.
And sometimes when you insert a word and a punctuation mark and you use * you will see that a totally different word with the same punctuation may appear (if the word has the same combination of keys).
I suppose and I think I'm right that N95 treats "word + punctuation" as a completely new word and moreover the phone saves it automatically and secretly to the custom dictionary even if we don't want them to be saved.
@chanchan05
Sure, but it has nothing in common with the beta version of Custom Dict.
In my case the Dict works as expected.
It just helped me to discover what is on the list of my custom words and I was really shocked to see over 2000 words (each word repeated several times with different punctuations at the end).
You can make tests to notice what happens every time when you are writing a message.
Insert a word, add a punctuation and use * several times.
Then use the Custom Dict app to edit the list of custom words.
@foxmeister
Thanks for the info.
As I can see you are now using the N900.
Does it work better in N900? -
AE text replacement script, Hebrew characters and punctuation marks
Hi,
I'm using a script to replace text on one of my AE projects. When I use English characters it work prefect, the problem is once I'm trying to replace the text with Hebrew I get small arrows (as shown in the attached screen grab) before and after punctuation marks.
Any idea what can cause this kind of behavior, is it script related or the base AE file?These appear to be glyphs that should be substituted. Could be something to do with specific text flow or multi-variate glyphs that are substituted based on the context of neighboring characters. In any case, short of manually fixing it I don't think there is any way to get this right. AE is quite limited in dealing with any of this stuff and in the past you actualyl needed the Middel East versiosn to get correct RTL writing at all...
Mylenium -
I first added a song to my project and added beat marks using the "tap M" feature where I want a beat mark. Then I dragged in a number of still photos. The photos look great. Changing to the beat of the song. But now I want to add a Title Text window at the very beginning, have it on the screen for about 4-5 seconds, and then start my slideshow to the music. The problem is when I add that text window to the begining, the song wants to start there. I want it to start on the first photo. Can anyone help?
Mikemass1221 wrote:
... I don't think you can use this method if you drag a song to just one clip..
sure you can:
but, your project's almost done - so, just 'push the audio aside':
#1: applied audio first, added M's, applied photos to markers..
#2 dragged some black in front = pushed photos aside
#3 dragged audio to match markers with edits back again ... .. -
Safari Doubles My Punctuation Marks..
Does anybody here know why Safari often doubles my punctuation? Here is an example:
Hello,, Bob.. Send it via smpt..mac..com.. I can’’t fix it..
It usually happens when I hit the next keystroke (even the space bar) after typing the punctuation mark, although I can back space and delete the extra character. The page also often freezes while I’m writing text, so I’ve started writing my text in Tex-Edit Plus and just pasting it into the text field in Safari. Even when the page freezes, I can usually still view pages in other tabs. I think that the freezing might happen often when I move by clicking the mouse in a text field and/or use the tab key to change text fields. Have you heard of this before? Thanks.This problem was solved in another thread by David Gimeno Gost.
http://discussions.apple.com/thread.jspa?threadID=822572&tstart=0
It turned out to be a corrupt Launch Services database. Thanks David! -
Change user's OU with punctuation mark doesn't work by Rename User View
Hi,
I have problem with moving user between OU by Rename User View when punctuation mark in name of OU is used.
I have own WF that assign user to specific OU depending on value of Select component. When value of this component is changed (against previous value) I call Rename View, that assign user to new OU. For OU without punctuation mark Rename View works OK.
After finishing WF with punctuation mark in OU this Error appers:
java.lang.RuntimeException: There is no such object on the server.
But creating new AD account (by role assignment) in OU with punctuation work OK. In select component is rule that replace puctional character in correct form.
Select component:
<Field name='slctOrganizationalUnitUzivatele'>
<Display class='Select' action='true'>
<Property name='title' value='Nastavte organizacni jednotku:'/>
<Property name='allowedValues'>
<block>
<dolist name='zmena'>
<invoke name='listResourceObjects' class='com.waveset.ui.FormUtil'>
<invoke class='com.waveset.session.SessionFactory' name='getServerInternalContext' />
<s>OrganizationalUnit</s>
<s>AD</s>
<null/>
<s>false</s>
</invoke>
<rule name="RUL nahrada znaku">
<argument name="inputString">
<ref>zmena</ref>
</argument>
<argument name='hledanyRetezec'>
<s>\,</s>
</argument>
<argument name='nahrazovaciRetezec'>
<s>\, </s>
</argument>
</rule>
</dolist>
</block>
</Property>
<Property name='sorted'>
<Boolean>true</Boolean>
</Property>
</Display>
<Default>
<upcase>
<ref>user.accounts[AD].ad_container</ref>
</upcase>
</Default>
</Field>
WF-Rename User
<Activity id='10' name='renameUzivatele'>
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='RenameUser'/>
<Argument name='id' value='$(user.waveset.accountId)'/>
<Argument name='authorized' value='true'/>
<Return from='WF_ACTION_ERROR' to='error'/>
<Return from='view' to='renameView'/>
</Action>
<Action id='1'>
<expression>
<block>
<set name='renameView.accounts[AD].identity'>
<ref>newDNrecord</ref>
</set>
<set name='renameView.resourceAccounts.currentResourceAccounts[AD].identity'>
<ref>newDNrecord</ref>
</set>
<set name='renameView.resourceAccounts.currentResourceAccounts[AD].selected'>
<s>true</s>
</set>
<set name='user.global.OrganizationalUnit'>
<ref>slctOrganizationalUnitUzivatele</ref>
</set>
</block>
</expression>
</Action>
<Action id='2' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkinView'/>
<Argument name='view' value='$(renameView)'/>
<Argument name='authorized' value='true'/>
</Action>
<Transition to='nastaveniPristupu-overeni'/>
<WorkflowEditor x='193' y='343'/>
</Activity>
<set name='newDNrecord'>
<concat>
<s>CN=</s>
<ref>user.global.fullname</ref>
<s>,</s>
<ref>slctOrganizationalUnitUzivatele</ref>
</concat>
</set>Do you have any ideas?
Thanks PetrHi,
I discovered following:
- if name of OU in AD is without space (e.g. test,sample) so DN record is test\,sample and user is moved into this OU.
- if name of OU in AD is with space (e.g. test, sample) so DN record is still test\,sample and user isn't moved.
So problem is with empty space. How can I preserve space in DN name? I found something in documentation but I doesn't work for me.
+Special Characters in FieldValues
If you have a field value with a comma (,) or double quote (") character, or you want to preserve leading or trailing spaces, you must embed your field value within a pair of double quotes ("field_value"). You then need to replace double quotes in the field value with two double quote (") characters. For example, "John ""Johnny"" Smith" results in a field value of John "Johnny" Smith. +
(from IDM Business Administrator's Guide, p.77)
Guided this information I put value of slctOrganizationalUnitUzivatele into "". But this didn't work. Is good idea to have space in DN?
Thanks for help.
Petr
Edited by: petrklinkovsky on Sep 10, 2009 5:06 AM -
when i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour . pls say me how to fix this plssss . my email = **********
<E-mail Edited by Host>Wrong Forum
-
Keyboard punctuation marks suddenly changed
I&m a little baffled. When I was using my iPad with the wireless keyboard this morning I was typing along with problems but after a jont in my backpack the punctuatiion marks that correspond to the number no longer match.
2 should be a quotation marks but comes up as @
6 should be the emporers and but now comes up as ^
7 should be an apostrophe but comes up &
8 should be a bracket but comes up *
9 should start the bracket but now (
Other punctuation marks around the keyboard are also switched around. I didn&t turn off the Bluetooth setting when I put it in my bag, so I&m guessing that some combinations of keys switched the layout.
At the bottom to either side of the space bar are keys I can press to change the language but there&s no way I&ve found to revert it back to the layout I used before. Any suggestions?
thanks
swsGood mooring to you both. I tried both your suggestions and neither worked, so I opted for the easy way out; I took out the batteries, wated ten minutes and put them back in. That did work. I can kick myself for not thinking of that sooner. Still, I did learn a bit about setting the keyboard layout, so that you all for taking the time to write me back.
Cheers, -
After translation text is placed above text
A file was saved as .svg to be able to translate it with Trados. When I got the .svg file back (even when saved as .ai), some text was placed above another text.
Text 1 is regular and text 2 bold. Even when I modify text 2 to regular in the original file and let it translate again, this text still remains above text 1.
Any idea what could be the reason for this?
I use CS3, Windows XP Professional Version 2002 Service Pack 2.
Thank youInge, SVG is a very bad format to use for translations.
If you want, I've developed a tool that exports all text frames from an illustration to an XML file (which you can open in Trados), and then imports it back, overwriting the original text.
Contact me by email if you're interested... -
Added a check to Text to sequence file result in Test Stand hang up.
I added the check in text to sequence file translator.vi (the file is attached)
With this addition I generated the dll.
Test Stand load the sequence file without any problem for the first time.
If I add a space to the sequence file and save the file; test stand tries to load the new sequence file saying file has changed do you want to load the new sequence...
But fails to load the sequence (Test Stand hangs up)
The only way to overcome is kill the TestStand thru task manager.
Which displays
"You chose to end the nonresponsive program, SeqEdit.exe"
Attached the displayed error (error.doc)
Attachments:
Changed code.vi 55 KB
Error1.doc 45 KBHi Vidula,
Is it only when you add a space to the file name that you see this behavior? If, for instance, you add a '1' to the beginging of the file name does the same thing happen?
Adam
National Instruments
Applications Engineer -
Adding Chapter Marks makes DVD audio not work
I sent a 65-minute video to Compressor from Final Cut Pro X. In Compressor I used the 'Dolby Digital Professional' and 'MPEG-2 for DVD' settings from the Disc Burning folder as targets, and added a job action to create the DVD. I left all default settings. DVD worked fine with good audio and great picture. Then I manually added Chapter marks in Compressor and created another DVD. This DVD had no sound for about half the video. Any ideas on how I can add Chapter marks in Compressor without losing audio? This is for a school Talent Show with about 25 different acts, so I really want to have a Chapter selection on the DVD. If I try other apps to make the DVD (FCP X, iMovie, iDVD) the video quality suffers terribly, so I'm hoping I can get Compressor to work. Thanks for any help.
I've come up with a fairly straightforward workaround for this. In Final Cut Pro X, before sending to Compressor, do an audio-only export to an AC3 file (Share...Export media, select "Audio Only" for Export and "AC file" for Audio file format). Then use the "Send to Compressor" function from the Share menu in FCP X. In Compressor, create a DVD using the standard "Dolby Digital Professional" and "MPEG-2 for DVD" settings and adding a "Create DVD" job action. Make sure the target AC3 file name in Compressor has a different name (or location) than the AC3 file you created in FCP X. The resulting DVD does have intermittent audio as before, so it can be discarded.
Here's the trick:
Open the folder containing the Compressor-created AC3 file, copy the file name, then move that file to the Trash. Find the FCPX-created AC3 file, rename it with the name of the Compressor-created AC3 file, and move it into the folder where the Compressor-created AC3 file was before you moved it to the Trash. Now you can resubmit your job from Compressor and it will burn a new DVD using the AC3 file you created from FCP X, which should have good audio. For me this created a great looking DVD with the high quality MPEG-2 video from Compressor, and the good audio AC3 from FCP X.
I think there is a bug when sending FCP X projects with multi-cam portions to Compressor. I've seen two other cases of this on the discussion boards and multi-cam appears to be the common thread. I can't think of any logical reason that an AC3 file created in FCP X would sound fine, but the same FCP X project sent to Compressor results in an AC3 file with intermittent audio.
At one time I thought the issue was exceeding the capacity of the DVD. But after experimenting I learned that an AC3 file created in Compressor from my multi-cam FCP X project has intermittent audio, even without a "Create DVD" job action. (I used VLC to play back the AC3 file and had the same intermittent audio I had with the DVD). -
Japanese punctuation marks on iOS
Our Japenese translators noticed that punctuation marks (dot and comma) are not displayed correctly in our Adobe AIR application when running on iOS. The marks are displayed vertically centered instead of bottom aligned. It does not reproduce on Android and desktop. I'm using device font to display the labels. Any workarounds?
Hi,
So there are fonts that can have all types of glyphs. In our specific example both Chinese and Japanese glyphs. In such a case a character code could resolve to both Chinese and Japanese and with both choices the runtime may pick either of the glyphs based on a certain logic. If however you make sure and use the right font name then the runtime knows exactly where to look. Try changing the font to a Japanese font, I think that should work.
-Kshitiz -
Indesign ME CS6: Punctuation marks change direction when exporting to PDF
When exporting to PDF (for press) - some punctuation marks (! & ") beahve as if they're "left -> right" (in the PDF only!) instead of "right->left" - as they appear in the open file.
If I understand this correctly, then before you opened a PC-sourced INDD, this never happened? And now it happens with all new files? Was that PC-sourced InDesign file from an English non-ME install of ID?
If doing so is not a big deal for you, I would almost want to suggest the "Nuke it from orbit, it's the only way to be sure" approach coined by Sigourney Weaver's character in Aliens. I.e. something happened to your ME install by simply opening up a non-ME file, and clearing prefs didn't fix it, so I'd be ready to uninstall, run the Adobe Clean tool, and reinstall.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
I hope that I'm wrong, and that there is some kind of preference that can be tweaked to get this to work correctly. I'd start by removing Font Explorer X entirely. It's also worth trying to make a new user in OS X and seeing if a fresh user experiences the same issue. -
Adding news ticker or text scroller in a jsf page
Can anyone please give me some clue about adding news ticker or text scroller kind of component using jsf, richfaces or icefaces in which important information like information about available jobs can be shown?
Thanks in advance.
Edited by: 857452 on May 18, 2011 7:06 AM
Edited by: 857452 on May 18, 2011 7:07 AMthis is more the realm of javascript / ajax / DHTML, not JSF. JSF is server side, what you want to do is mostly client side. Only getting the data might involve the server.
-
When printing a document from a website found in a 4.0 Beta 12 Firefox search I get a print format were the text letters are 1/4th inches apart. It happens when I use the website's print symbol to reduce the page to a printable size. If I use the window print commands I get all the page with advertising etal
but it is spaced fine.View this thread for the answer.
https://support.mozilla.com/en-US/questions/787654#answer-141639
Maybe you are looking for
-
Css problem in internet explorer
Hi to all! On my page as part of the page template I have build in a little drop-down user panel on the left top of the page. html:<div id="userpanel"> <span><img src="'#APP_IMAGES#openSlidedown.png" /> <a>logon: &APP_USER.</a> <div id="userpanel
-
I first got my iPod about two years ago and recently when I got an iPhone 5s, I noticed that some of my songs have been deleted, randomly. I looked under my purchased songs and there is no trace that I previously bought these songs. Another problem t
-
Cannot run Register Test on communications task through Hardware Diagnostics Tool
Cannot run Register Test on communications task through Hardware Diagnostics Tool. Please help. Thanks.
-
Hi, I have 11.5.10.2 on linux. My database version is 9.2.0.8. How can I make my database 10g, is it safe to upgrade database? I can have any issue in future?
-
When I try to download apps, I get the error code A12E1. How do I fix this?