Adding/Putting Loops/Samples together in LP

How do you to get samples to "snap" right up against each other when adding to an audio track in logic pro?
Can't seem to get them to do that, have on other apps,,,???
Thank You

In the top right of the arrange page, try the various drag modes - try setting it to Shuffle L or Shuffle R, and the regions will snap together when dragged reasonably close.

Similar Messages

  • I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

    I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

    In your library, right-click the song you want to edit.
    select "get info".
    go to "options" and select the start and stop times for your first section of the song.
    click "OK".
    Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
    The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
    Now you can go back to the other version and repeat the process with a different  start/stop time.
    Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
    To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

  • I put  video clips together and added music off of iTunes but it will not attach when I put it on youtube or vimeo. what is wrong.  It plays as I made it on iMovie

    I put  video clips together and added music off of iTunes
    but it will not attach when I put it on youtube or vimeo.
    what is wrong.  It plays as I made it on iMovie

    Thank you all for your replies. Here is what i ended up doing. I cannot afford any 3rd party software so i went to itunes and manually entered all my playlists. As I had indicated my purchased music was on my new computer just not the playlists  and I could not sync my ipod. After I rebuilt all my playlists I tried to restore my ipod to factory defaults/new. All of the steps called for in apple support and elsewhere were not available to me. I connected my ipod, went to my computer, right clicked my ipod, and formatted. That wiped my ipod so when I connected to itunes it then gave me a restore option. I did the restore and all is good in the empire again. I can now buy new music and sync my ipod so I am a happy camper.
    Thanks to all.

  • Does two timed loop work together? is it possible....

    Hello
    I use Crio in scan mode and have problem with timed loop.  I use two timed loop for two different PID loop. I need to get 1ms delay for PID loop. But When I two run realtime side with timed loop, only one of them work (when ı send command from host side). Is it possible to run two time loop 1ms. How can I configure each timed loop work together properly? (ı configured the each time loop as synchron scan enginee 1ms)
    Both array are used for sinusoidal position data form host vi. I use time delay (1 ms) to make certain frequency with sample size(I adjust sample size for 1000 for 1 hz 500 for 2 hz).Each loop control  to position of servo system with PID. So I use two VI in my host side and I send two different sinus data with array. I tested with one timed loop it works vey well. But When I try it two time loop it dosent work.
    Attachments:
    RT TEK.vi ‏105 KB

    Two loops in parallell is quite easy, you just need two unconnected loops. If there's a wire in between you get data dependency which means the 2nd loop will wait until the 1st one finishes.
    Is that what happening to you? (I cant open the file)
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • NEED HELP PUTTING MULTIPLE PAGES TOGETHER IN 1 PDF

    HOW DO I PUT 10 PAGES TOGETHER TO OPEN IN 1 PDF?

    Thanks Janelle - I do not have that ability with the Epson RX580. Epson just answered my tech support question with this answer:
    I am sorry you are experiencing difficulties with your EPSON Stylus Photo RX580. Unfortunately this feature is not available with Mac OS X. You will need a third-party software that will help you with this, such as Poster Print for Mac or Tiler. Please note though that Epson does not support these applications.
    So I guess my question becomes what software can I use to print my images on multiple pages. As I do large photo transfers I need to be able to do this with my mac in an efficient way and not try to cut portions of image into seperate print jobs that would be too time consuming. HAve you had any experience with other software. If not I guess the next question  what printer would you recommend that would do this with my MAC. I have included a pic of one of my larger transfers on a cupboard. To do this I needed the image to be tiled on 8 different sheet of 8.5x11 so this is a feature I need through either software or a printer that is easy to use and easily accessible. Thanks Krista
    I am inl

  • Okay so i recorded a song but each part comes out as like take 1, i have 10 takes. how can i put them all together as one take, to make one song all in one take not small pieces of a song.

    okay so i recorded a song but each part comes out as like take 1, i have 10 takes. how can i put them all together as one take, to make one song all in one take not small pieces of a song. like i hit record and sang the entire song but when i hit play it was in pieces not just one song like it was in ten takes. is there any way i can blend it all into one take, to make one clear song?

    You're not very clear in stating your problem. Maybe it's terminology: "takes" in recording lingo (and in GB lingo) are different version of exactly the same part in a song, so you only want one of them in the end. Please tell us exactly what you did and what it is that you don't like.

  • HT5129 I had photos from MobileMe organized into different events.  When iPhoto made a MobileMe event, it took all of those photos out of the other events and put them all together in the new "from MobileMe" event.  Is there any way to reverse this?

    I had photos from MobileMe organized into different events.  When iPhoto made a MobileMe event (when MobileMe ended), it took all of those photos out of the other events and put them all together in the new "from MobileMe" event.  Is there any way to reverse this?

    Only to load your backup from before downloading the MM photos
    LN

  • Adding User Loops

    I'd like to confirm the results an experiment I tried with adding loops that seems like a bug.
    I created a loop using the Apple Loop Utility and set the bpm and key. Then I imported the loop into GB. GB correctly interpreted the bpm and key when I changed the project key and tempo.
    I added this loop to the Apple Loop Library by dragging it to the Loop Browser. When I looked in the Loop Browser the bpm and key were incorrectly shown as the current project key.
    However, when I dragged the loop back into the project, the loop behaved as though it still had the bpm and key that I originally set in the Apple Loop Utility. So it looks to me like the info that shows up in the Loop Browser is getting incorrectly updated.
    Is there any other way to add user loops to the Apple Loop Library and have them show up in the loop browser. I tried dragging the loop directly to the Apple Loop Library, but it didn't appear in the Loop Browser.

    you can drag it directly
    into the Loop Browser and it will retain its original
    loop properties.
    Tangoloco,
    You have indirectly touched upon a weakness of the GB browser that I must continually work around. Since I am tonight in the process of implementing that work around I thought I would find this post and flesh it out.
    Once an "Apple Loop" is in the GB browser no matter what its original BPM and key are you can only hear it in the BPM and Key of the master track. This is convenient in most cases but in some cases it is very inconvenient.
    Inconvenient in the sense that one can only hear the loop in its original BPM and key by either matching GB's Tempos and Key to that loop OR you must use the Mac Finder to listen to the loop in its original condition.
    Often I like to hear the loop in its original BPM tempo and key. Often I will find one loop that inspires me to create a tune around that loop in its original BPM tempo. But if I am making a GB tune in 120 BPM and go thru the browser and see an 80 BPM loop I can ONLY hear it thru the browser in 120 BPM.
    I may even want to take that loop at its original 80 BPM and drop it into my 120 Track AT 80 BPM. So what I have to do is work around and find the loop in the Finder and then move it into the GB time line from outside the application. Kind of what your question is about in a way. Dropping a loop into GB so it can retain its original BPM and NOT be affected by whatever the tracks BPM is.
    If I could change one thing in GB it would be the browser ability to playback. I would love to see a browser that can play a loop in the current tracks BPM (like it does now) and also give me the option to hear it in its original BPM.
    Well back to music making.......

  • TS2516 an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

    an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

    This user talked to Apple Support personnel and confirms what Larry is suggesting:
    crowland1066
    Re: book upload fails
    Nov 30, 2013 3:02 PM (in response to pablo123)
    Just got off the phone with apple support.  If the photo book completes the assembly process but fails during the upload process the problem is in their overloaded servers.They just started a free shipping promotion for the holidays which has increased the traffic dramatically. I bought a calendar a week ago and it went right through. I'm going to try again during less peak times.
    Happy Holidays

  • I Took apart a mac mini 2007 and i cant put it back together and a part holding the cmos battery broke off

    I Took apart a mac mini 2007 and i cant put it back together and a part holding the cmos battery broke offplease i need serius help

    Yikes, see if anything here helps...
    http://www.ifixit.com/Teardown/Mac-mini-Model-A1283-Teardown/659/1
    And on yhe battery clip, do you suppose Super  Glue would work?

  • Exs sampler need looped sample to play forever

    I have made an exs instrument of 2 separate  1 measure arpeggiated keyboard lines that I have set to loop in EXS sampler on MS2.
    I have the EXS set to Mono, and to Unison so that one looped sample will cancel out the other one,  I have now assigned 2 drum triggers on my midi drum kit
    to each be the note that each of the 2 samples are assigned to. I have the release,sustain,decay cranked all the way on the EXS sampler, however, my samples still slowly die out.  Is there a way for me to make them play forever until I play the other sample or hit panic button?
    as long as I hold the note it will play forever, however I want to be able to hit a trigger that's assigned to that note, and have it simply loop forever

    ù
    Is loop in EXS24 editor flagged?  I think here around is your solution
    • Loop On checkbox: Activate to enable looping and to allow access to the other Loop parameters.
    • Loop Start, Loop End fields: Define discrete loop start and end points, allowing you to loop a portion of the audio file.
    • Control-clickeitherfieldtoopenashortcutmenuthatallowsaccesstotheLogicPro Sample Editor (or an external editor). This enables you to set the loop start and end points graphically: Loop Start is represented by the LS marker and Loop End by the LE marker. See Editing Samples in the EXS24 mkII Sample Editor.

  • [svn:osmf:] 13851: OSMFPlayer: adding a nicer sample image.

    Revision: 13851
    Revision: 13851
    Author:   [email protected]
    Date:     2010-01-28 04:18:13 -0800 (Thu, 28 Jan 2010)
    Log Message:
    OSMFPlayer: adding a nicer sample image.
    Modified Paths:
        osmf/trunk/apps/samples/framework/OSMFPlayer/html-template/index.template.html
    Added Paths:
        osmf/trunk/apps/samples/framework/OSMFPlayer/html-template/images/vegetation.jpg

    Hi,
    You are the first person I have read so far on this forum who does not use Flex or Flash builder. I will check out FlashDevelop. It is good information to know. Thanks a lot!
    -Wei Zhang
    Senior Computer Scientist
    Adobe Systems, Inc.
    [email protected]

  • [svn:fx-trunk] 9376: Adding a "loop" property to VideoElement/VideoPlayer.

    Revision: 9376
    Author:   [email protected]
    Date:     2009-08-18 15:20:39 -0700 (Tue, 18 Aug 2009)
    Log Message:
    Adding a "loop" property to VideoElement/VideoPlayer.  This is a true/false value and will determine whether the video loops or not.
    Also changing VideoElement to be a UIComponent, rather than a GraphicElement.  This gives VideoElement all of the lifecycle events, which are useful to a full-fledged component.  The name/packaging will probably change in a future checkin as the OSMF names get settled upon.
    QE notes: -
    Doc notes: -
    Bugs: SDK-22175
    Reviewer: Deepa
    Tests run: checkintests, Matt ran mustella and excluded some tests
    Is noteworthy for integration: Yes
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22175
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as

  • Some of my albums on itunes ave split, how do i put them back together?

    some of my albums on itunes have split, how do I put them back together?

    - Are the apps missing or are the icons white?
    - If missing have yu tried using the Spotlight search and trying to find them?
    - Have you tried downloading them on your iPad and then syncing?
    - Have you tried deleting them on the computer and then syncing?  That might also delete them from the iPad so you can redownal them
    - Have you tried reetting the iPad?
    Reset iPad:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • Question about putting video clips together

    I am trying to put clips together in Premier Elements 12 using Windows 7 Professional. I keep getting an error message: "This thype of file is not supported or the required codec is not installed."
    I admit that the clips are mostly jpeg and Flip video. I have installed the Flipshare software on the computer. What can I do to put these clips together? I saw an answer that mentioned exporting the BBB.prel Timeline to an appropriate file saved to  the computer hard drive and then import that file into AAA.prel, using  AAA.prel's Add Media/Files and Folder/Project Assets from where you drag  the import to the Expert workspace Timeline to join the AAA.prel  content already there.
    But I don't know how to export, and what is an "appropriate file"?
    Thanks.
    Message was edited by: monkmara

    monkmara
    We need more information in order to resolve your issue.
    Are you saying that you cannot import even .jpeg photos into your Premiere Elements 12 Windows project...and your Flip video as well?
    a. Were these jpeg processed in Photoshop? Do you know if they have the CMYK color profile? What are their pixel dimensions (width and height in pixels)?
    b. What is the brand/model/settings of the camera producing the Flip video?
    With the above information we can get at the media and program compatibility issue(s) that might be triggering the message "This type of file is not supported or the required codec is not installed."
    You say that you have installed "Flipshare software" to your computer. What do you intend to do with it? If you are thinking to use it to convert the problem files into another format that Premiere Elements will accept, we still need to know the properties of what you are working with and set Premiere Elements accordingly.
    The concept of using content from one Premiere Elements project file into another Premiere Elements project file does not apply to the situation that you describe for your issue.
    You need to describe what you have for media and then we can proceed from there.
    The brand/model/settings for the camera that produced the Flip video is a good start.
    MediaInfo and gspot are programs to get at the properties of your video. But the brand/model/settings information may be all that we need.
    http://sourceforge.net/projects/mediainfo/
    http://www.headbands.com/gspot/
    Please review and consider and then we can decide what next.
    Thank you.
    ATR

Maybe you are looking for