Adding remote Gateways to a UC install

Are there any step by step installation documents for Cisco customers to install remote voice gateways on their own? We have a UC 8.5 install and may expand with other sites. For example we may want to remove our Avaya remote Gateways and put Cisco Voice Gateways in. Concerns are trunking, dial plans, call handlers etc. to these remote sites. Will Cisco allow you to purchase the hardware / software and allow the end user to do the install? Any feedback would be appreciated.

Aside from you building the whole config and just ask them to telnet to it and paste it, that's a terrible idea. Step by step installation guides... for what??? If you want a guide that covers from logging into the ISR, setting interfaces, IPs, etc. all the way to setting up voice features, nope, there are guides for each feature separately, and we assume you know how to tie them all together to get a working config.
You also cannot buy anything directly, you would need to go through a partner for that, not sure if you can simply have them buy it for you and then leave you on your own.
I strongly suggest you have a reputable Cisco partner do this, or if someone within your company knows how to do this, have him do it.
I'm assuming when you say "end user" you're referring to a non-technical individual with no, or minimal, knowledge of Cisco technologies.

Similar Messages

  • Installing the Flash remoting gateway on a J2EE server

    I am trying to install the flash remoting gateway onto my
    J2EE server to make remoting accessible to all my War deployments.
    I assume I need to merely copy the gateway.jar file to the domain1
    docroot directory. Would someone confirm this for me or tell me
    what I need to do to establish this functionality for my J2EE
    server.
    Thank you,

    Hi
    To start/stop gateay find this
    http://help.sap.com/saphelp_nw04/helpdata/en/bb/9f13194b9b11d189750000e8322d00/content.htm
    You can install a seperate gateway as per the requirement. That can be find out in DVDs of SAP Presentation server installation.

  • RVO42G VPN Error - The Remote Gateway is Not Responding. Do you want to wait?

    I have followed the instructions @
    https://supportforums.cisco.com/docs/DOC-29399, but continue to receive the error message The remote gateway is not responding.  Do you want to wait? 
    According to the RV042G, it shows the connection was made and the status is set to "online" for the user, but choosing to wait does not connect and the error returns eventually requiring you to select "no" to waiting.
    Thanks for your help.
    Clinton

    Thanks for reaching out Abhishek.
    I am trying to setup a Client to Gateway VPN so I can utilize the 50 available tunnels.  I have setup a Group VPN with user accounts associated with it.  I have installed the Cisco QuickVPN client on Windows 7 and Windows 8 clients and have attempted to login.  I have followed the instructions that Cisco posted @ https://supportforums.cisco.com/docs/DOC-29399, but cannot connect a remote client successfully.  I recieve the error: 
    The remote gateway is not responding.  Do you want to wait?
    Looking at the VPN log on the RV042G, I see:
    Jun 26 11:27:45 2013    VPN Log (qknips0): deleting connection
    Jun 26 11:26:51 2013    VPN Log loading secrets from '/etc/ipsec.d/ipsec.secrets'
    Jun 26 11:26:51 2013    VPN Log forgetting secrets
    Jun 26 11:26:51 2013    VPN Log listening for IKE messages
    Jun 26 11:26:51 2013    VPN Log added connection description (qknips0)
    Jun 26 11:25:41 2013    VPN Log loading secrets from '/etc/ipsec.d/ipsec.secrets'
    Jun 26 11:25:41 2013    VPN Log forgetting secrets
    Jun 26 11:25:41 2013    VPN Log listening for IKE messages
    Jun 26 11:25:41 2013    VPN Log added connection description (grpips0)
    Jun 26 11:25:41 2013    VPN Log (grpips0): deleting connection
    I don't know what else to do to get the QuickVPN client working so I can take advantage of the VPN service and 50 tunnels.
    Thanks.

  • QuickVPN RV180W - Remote gateway wasn't reached

    I am trying to setup QuickVPN on my RV180W and having no luck.  My client log shows "Remote gateway wasn't reached"  "Failed to connect".  The client is Win7 64-bit.  I have created the firewall rule for icmpv4 on my windows 7 client but still no luck.  I checked with my ISP and they say all ports are open.  I have created the VPN user. 

    this is just silly!
    ive been reading posts from 2009 we are now in 2013 and this problem still excists. i buy a router with quickVPN, cannot get it to connect due to the ping on windows 7 x64\x86 and i have also tried windows XP.
    nutting.
    i have tried everything i have read over the last week and still i cannot get a quickvpn connection running. Cisco support confirmed my router config is ok as they had a quickvpn connection from their lab XP machine running for a few minutes.
    2013/12/16 15:13:40 [STATUS]OS Version: Windows 7
    2013/12/16 15:13:40 [STATUS]Windows Firewall Domain Profile Settings: ON
    2013/12/16 15:13:40 [STATUS]Windows Firewall Private Profile Settings: ON
    2013/12/16 15:13:40 [STATUS]Windows Firewall Private Profile Settings: ON
    2013/12/16 15:13:41 [STATUS]One network interface detected with IP address 192.168.30.237
    2013/12/16 15:13:41 [STATUS]Connecting...
    2013/12/16 15:13:41 [DEBUG]Input VPN Server Address = DNSNAMER
    2013/12/16 15:13:41 [STATUS]Connecting to remote gateway with IP address: REMOTEIP
    2013/12/16 15:13:42 [WARNING]Server's certificate doesn't exist on your local computer.
    2013/12/16 15:13:46 [STATUS]Remote gateway was reached by https ...
    2013/12/16 15:13:46 [STATUS]Provisioning...
    2013/12/16 15:13:55 [STATUS]Success to connect.
    2013/12/16 15:13:55 [STATUS]Tunnel is configured. Ping test is about to start.
    2013/12/16 15:13:55 [STATUS]Verifying Network...
    2013/12/16 15:14:01 [WARNING]Failed to ping remote VPN Router!
    2013/12/16 15:14:04 [WARNING]Failed to ping remote VPN Router!
    2013/12/16 15:14:07 [WARNING]Failed to ping remote VPN Router!
    2013/12/16 15:14:10 [WARNING]Failed to ping remote VPN Router!
    2013/12/16 15:14:13 [WARNING]Failed to ping remote VPN Router!
    2013/12/16 15:14:16 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2013/12/16 15:14:46 [STATUS]Disconnecting...
    checked ipsec services.
    disabled and enable firewall
    checked for single network card (i mean common, how many portable devices only have 1 nic?)
    opened icmp on firewall
    enabled icmp respond on WAN.
    added quickvpn to firewall
    enable remote managment (was already enabled and has to be for qvpn to work)
    used IP instead of dns
    running in compatabuilty mode for vista and xp
    cant remember all the things ive checked and changed over the last week.
    there is so many different apparent fix's and no concreate info from Cisco.
    advertise it as a VPN router but infact only thing that works is pptp (shake my fist at you Cisco)
    any help would be greatly appreciated as im close to returning this as not fit for purpose.
    thanks in advance.

  • Ssl to remote gateway

    Is it possible to apply ssl to remote gateway port adapter?
    we have setup remote gateway and IIS on one machine.
    and IDM and App Server on another.
    configured the IIS SSL with Websphere to call IDM page.
    while IDM is interacting with Remote Gateway adapter, can we apply SSL to that port address(i think it is 9278)?

    Hi,
    For Event ID 102, please refer to following article and check if can help you.
    Event ID 102 — RD Gateway Server
    Configuration
    à
    What is confusing about this is that Remote Desktop Services role is not installed on this server
    Did you enable RWA on the SBS 2011?
    Small Business Server 2011 Standard installs and configures the Remote Desktop Gateway role for use with the Remote Web Access website. The setup process does not install the Remote Desktop Gateway Manager management console. As a result, the Remote Desktop
    Gateway Manager mmc will not be listed under the Administrative Tools and in Server Manager, the Remote Desktop Gateway role will appear to not be installed. The service is however installed and is properly configured for use with the Remote Web Access website
    by SBS Setup and the Internet Address Management wizard.
    Please type
    services.msc in RUN to open Services panel, navigate to Remote Desktop Gateway service and open its Properties. Would you please let me know the Startup type of this service that had been set? Meanwhile, please refer to following KB and check
    if help you to manage the Remote Desktop Gateway Service in SBS 2011 Standard.
    How to Manage the Remote Desktop Gateway Service in SBS 2011
    Standard , SBS 2011 Essentials, Windows Server 2012 Essentials and Windows Server 2012 R2 Essentials.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Remote gateway is not responding error message

    When I try to connect through Quick VPN installed on PC with XP SP3, it shows "remote gateway is not responding".
    I am using following setting
    router configuration:
    =========================
    #1. Basic Setup, set MTU to manual and to 1492.
    #2. In the Firewall - General Tab , DoS Prevention must be disabled, and everything else unchecked.
    #3. VPV - VPN Client access, enter user name and password.
    #4. VPN - VPN Passthrough - All Enabled.
    #5. VPN - IPSec VPN -did not touch and here are the enteries:
    section VPN Tunnel:
    vpn tunnel: disabled
    name: blank
    NAT-Traversal: disabled
    Local secure group:
    type: IP adress
    IP address: 192.168.1.0
    Mask: 255.255.255.255
    Remote secure group:
    type: IP adress
    IP address: 0.0.0.0
    Mask: 255.255.255.255
    Remote secure Gateway:
    type: IP adress
    IP address: 0.0.0.0
    Key Management:
    did not change anything either
    Here is the VPN log on the router:
    041 [Sat 21:18:40] listening for IKE messages
    042 [Sat 21:18:40] forgetting secrets
    043 [Sat 21:18:40] loading secrets from "/etc/ipsec.secrets"
    Home side I am using Dlink router DI-624 and IPs are 192.168.0.1 and IPsec on the router is enabled.
    On office side IP is 192.168.1.1 with linksys WRV200 router.
    Please let me know what changes should I do on the router etc.? Thanks for your help.
    Message Edited by JD001 on 09-15-2008 08:38 PM

    All of them are running with Win XP SP2 at work. NAT-Traversal: is Disabled. DMZ is enabled. Thanks

  • How to reduce the number of Remote Gateway connections from one server

    Hi ,
    We have an XI 3.0 prod system which is being flooded every month end by the invoices generated in our ERP system and occupying all the gateway connections, what I see is that all the remote gateway connections are being established by our ERP server and still there are many requests waiting at the ERP server and failing.
    When we ran the same in  our test landscape, the invoices are getting transferred to XI with out any problems, the remote gateway connections are free even when the invocie Volumes transferred are the same in Prod and Test servers.
    we are not considerint to Increasing the rdisp/max_gateways as the volumes of invocies transferred are really huge and in one of the test, we observed that when 40 invocies are transferred from ERP, it occupied 40 Remote gateway connections in our XI prod
    We are looking for the option similar to our test system of transferring many requests from one connection. Is there any such specific option?
    Regards,
    Santhi Bushan.

    Dear Santhi,
    every gateway establishes only one connection to another gateway. If there are that many gateway/gateway connections, then you are probably connecting from more than one instance. You could circumvent this, if you use gateway options in the RFC destination being used, as this will force all outgoing RFC calls to go through a single gateway. This will then mean that the system has a single point of access.
    Best Regards,
    Tim

  • Net Parameter "keepalive" And Remote Gateway

    Hello,everyone
    There are some over time connections in the remote gateways monitor,Tcode "SMGW".I used command "netstat -ano | grep 172.27.0.*". Output like this "tcp        0      0 172.59.2.19:3300            172.27.0.203:59454          ESTABLISHED off (0.00/0/0)". I'm sure these connection have been overtime.
    I have got Information which may be caused issues by WAN Firewall  or other security devices from the note "743888 GW: gw/so_keepalive profile parameter".
    My question is .If there are not WAN Firewall or other secrutiry devices and I don't active parameter "keepalive",these overtime connections could be off ? The sap would be check these overtime connections ?

    Hello, checking "Questions with no replies" I saw this yours...
    (Hope you no longer need it)
    You should consider also the parameters:
    gw/keepalive
    ms/keepalive
    rdisp/keepalive
    Best regards,
    Rafa

  • Apple remote desktop wont upgrade or install

    apple remote desktop wont upgrade or install on yosemite
    Apple store woint let me purchase it either

    Hello and thanks for the reply.
    I tried the original install and the next installer v3.2, then tried to license and update.
    no go on either. The app freezes up on the serial number screen.
    Also when I run the updated from the link I get an error stating I already have a newer version.
    Frank

  • [Webrtc] [mozilla 26] Getting unhanded state type: 1 after adding remote stream

    Hi,
    I am working on a webRTC application. So far, I am able to make call b/w Chrome to Chrome and mozilla to mozilla. But sometimes mozilla to mozilla and almost everytime mozilla to chrome or vice-versa not working.
    I see that there is connection being made but audio/video stream are not being played.
    The onaddstream callback get triggered, but just after that "Unhandled state type: 1" warning get appeared.
    Please help.
    here is my code of onaddstream.
    pc.onaddstream = function(event) {
    // TODO: Finalize this API
    rtc.fire('add remote stream', event.stream, id);
    setAppLog('', 'add remote stream : ' + event.stream);
    console.log( ' add remote stream : ' + event.stream);
    //On console..
    20:25:32.895 Unknown property 'overflow-wrap'. Declaration dropped. connect.css:56
    20:25:32.895 Unknown property 'spacing'. Declaration dropped. connect.css:76
    20:25:32.896 Unknown property 'spacing'. Declaration dropped. connect.css:240
    20:25:32.896 Error in parsing value for 'padding'. Declaration dropped. connect.css:250
    20:25:32.896 Unknown pseudo-class or pseudo-element '-webkit-slider-thumb'. Ruleset ignored due to bad selector. connect.css:302
    20:25:32.896 Unknown property '-moz-box-shadow'. Declaration dropped. connect.css:326
    20:25:32.896 Error in parsing value for 'background'. Declaration dropped. connect.css:329
    20:25:32.896 Unknown property '-moz-border-radius'. Declaration dropped. connect.css:332
    20:25:32.897 SyntaxError: Using //@ to indicate source map URL pragmas is deprecated. Use //# instead jquery.min.js:1
    20:25:33.453 Use of getPreventDefault() is deprecated. Use defaultPrevented instead. jquery.min.js:5
    20:25:33.529 [object HTMLHeadingElement] webrtcconnection.js:51
    20:25:33.532 "This appears to be Firefox" adapter.js:17
    20:25:33.829 Unknown property 'box-sizing'. Declaration dropped. video
    20:25:36.445 "rtc.createStream : [object Object]" webrtc.io.js:338
    20:25:37.530 "rtc.on get_peers : [object Object]" webrtc.io.js:172
    20:25:39.995 "rtc on ready " webrtc.io.js:476
    20:25:40.221 "rtc.createPeerConnection : 71b80816-3832-2b33-9301-b04db3a561fb" webrtc.io.js:246
    20:25:40.222 "rtc.addStreams : [object LocalMediaStream]" webrtc.io.js:389
    20:25:40.223 "createDataChannel 71b80816-3832-2b33-9301-b04db3a561fb" webrtc.io.js:434
    20:25:40.224 "rtc.sendOffer : 71b80816-3832-2b33-9301-b04db3a561fb" webrtc.io.js:287
    20:25:40.225 "sendOffer : 71b80816-3832-2b33-9301-b04db3a561fb" webrtc.io.js:229
    20:25:41.180 "rtc.on receive_answer : [object Object]" webrtc.io.js:217
    20:25:41.181 "rtc.receiveAnswer : 71b80816-3832-2b33-9301-b04db3a561fb" webrtc.io.js:332
    20:25:41.580 " ADDING REMOTE STREAM... + 71b80816-3832-2b33-9301-b04db3a561fb : [object MediaStream]" webrtcconnection.js:573
    20:25:41.586 [object HTMLVideoElement] webrtcconnection.js:576
    20:25:41.601 " Remote stream added" webrtcconnection.js:671
    20:25:41.603 " add remote stream : [object MediaStream]" webrtc.io.js:276
    20:25:41.620 Unhandled state type: 1
    Thanks
    R.

    Hi R,
    Note: If the answer is not found here, I would certainly recommend going to stackoverflow.com and posting your question. [http://stackoverflow.com/questions/tagged/webrtc]
    *What version of the WebRTC API are you using, check the streaming api to see if its up to date
    *The spacing error, maybe try the [http://jigsaw.w3.org/css-validator/ W3C Validator] will help find why 'spacing' css value is not recognized
    *Found this discussion on the error, it looks like it is a mismatched json standard between the browsers? [https://groups.google.com/forum/#!topic/mozilla.dev.media/W3_dOXyEBBc]
    *would it be an unhandled object in that "rtc.fire()" call?
    *This discussion has how to turn on WebRTC degugging on: [https://groups.google.com/forum/#!topic/mozilla.dev.media/FrQE1OV7y38]

  • RV220W reports the remote gateway is not responding.

    Hi, I've just set-up one of the RV220W VPN solutions.
    This worked fine for a while, but now it reports the remote gateway is not responding.
    Other clients can connect, but not the computer I'm using at home.
    Logfile reports:
    2011/08/31 21:10:31 [STATUS]Success to connect.
    2011/08/31 21:10:31 [STATUS]Tunnel is configured. Ping test is about to start.
    2011/08/31 21:10:31 [STATUS]Verifying Network...
    2011/08/31 21:10:37 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:10:40 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:10:43 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:10:46 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:10:49 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:11:01 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2011/08/31 21:11:03 [STATUS]Disconnecting...
    2011/08/31 21:11:07 [STATUS]Success to disconnect.
    2011/08/31 21:15:07 [STATUS]OS Version: Windows 7
    2011/08/31 21:15:07 [STATUS]Windows Firewall Domain Profile Settings: ON
    2011/08/31 21:15:07 [STATUS]Windows Firewall Private Profile Settings: ON
    2011/08/31 21:15:07 [STATUS]Windows Firewall Private Profile Settings: ON
    2011/08/31 21:15:07 [STATUS]One network interface detected with IP address 192.168.2.2
    2011/08/31 21:15:07 [STATUS]Connecting...
    2011/08/31 21:15:07 [DEBUG]Input VPN Server Address = 81.167.1.1
    2011/08/31 21:15:07 [STATUS]Connecting to remote gateway with IP address: 81.167.1.1
    2011/08/31 21:15:07 [WARNING]Server's certificate doesn't exist on your local computer.
    2011/08/31 21:15:09 [STATUS]Remote gateway was reached by https ...
    2011/08/31 21:15:09 [STATUS]Provisioning...
    2011/08/31 21:15:17 [STATUS]Success to connect.
    2011/08/31 21:15:17 [STATUS]Tunnel is configured. Ping test is about to start.
    2011/08/31 21:15:17 [STATUS]Verifying Network...
    2011/08/31 21:15:22 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:15:25 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:15:28 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:15:31 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:15:34 [WARNING]Failed to ping remote VPN Router!
    2011/08/31 21:15:46 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2011/08/31 21:16:49 [STATUS]Disconnecting...
    2011/08/31 21:16:53 [STATUS]Success to disconnect.
    I've tried the most common stuff.
    Enabling ICMP, checked that remote administration runs on port 443, changed MTU to 1400 manually, It allows fragmented packages too.
    Checked that IKE and IPSec services are running.
    I've also tried both with windows firewall ON and OFF.
    A collegue of mine had the same problem in the same timeframe as me, but after a while - he suddently was able to connect.
    I still can't!!
    Firmware Version:        1.0.2.4
    Anyone got a fix for this?    
    Edit: IP is not real.   

    Ok, so I had a chat with Cisco - and it seems like the setup on the RV220W was done correctly and was working fine.
    Showed me a few things that could come in handy checking out when running diag on the quickvpn.
    I disabled all antivirus realtime checks, opened 443 and 500 inbound to my computer - checked that the QuickVPN.exe had an exception in the windows firewall, and that the firewall was enabled.
    Also checked that the services was set tu Auto and Started.
    Rebooted computer, and I was able to connect!
    Now I'm working my way back to the setup I had, to figure out what went wrong in the first place.

  • HT201068 In the Ap Store "Updates" window, it says that "Remote Desktop Client Update" was installed today.  I never intentionally installed "Remote Desktop".  How did it get there, Where is it on my computer, and How can I remove it?  Thank You!

    In the Ap Store "Updates" window, it says that "Remote Desktop Client Update" was installed today.  I never intentionally installed "Remote Desktop".  How did it get there, Where is it on my computer, and How can I remove it?  Thank You!

    I don't know if you have been there, but a very suspicious icon!  (Like this one on a NSA satellite: http://b-i.forbesimg.com/kashmirhill/files/2013/12/Satellite-logo-for-spying.jpg)  Yikes!
    Are they after the French too?!?  I thought we were allies?!?  Wait a minute . . . I'm an American citizen with the Constitutional Right (which they vowed to uphold when they took their job!) of privacy!!!
    What do you think of all this?
    How did you find it in the OS?
    Do I just trash it with "Secure Empty"?

  • Remote gateway not responding using linksys vpn client

    Please i need your assistance asap
    Am using this
    Linksys VPN router RV042, firmware version 1.3.12.19-tm
    Linksys  VPN Client version 1.2.11
    When i trying connecting via the VPN client on a window XP SP3 system it
    goes through the process of connecting,provisioning, activating policy
    and hang on verifying network. After a while a pop box comes up with ''
    The remote gateway is not responding. Do you want to wait''
    The RV042 shows that the client is log on  and online.but the VPN client
    access say The remote gateway is not responding. Do you want to wait''
    see below my vpn client log
    2012/07/26 16:17:55 [STATUS]OS Version: Windows XP2012/07/26 16:17:55 [STATUS]Windows Firewall is OFF2012/07/26 16:17:55 [STATUS]One network interface detected with IP address 10.54.39.592012/07/26 16:17:55 [STATUS]Connecting...2012/07/26 16:17:55 [STATUS]Connecting to remote gateway with IP address: 41.78.96.452012/07/26 16:18:10 [STATUS]Remote gateway was reached by https ...2012/07/26 16:18:10 [STATUS]Provisioning...2012/07/26 16:18:23 [STATUS]Tunnel is connected successfully.2012/07/26 16:18:23 [STATUS]Verifying Network...2012/07/26 16:18:27 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:30 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:31 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:33 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:36 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:59 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.2012/07/26 16:19:10 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:13 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:18 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:21 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:27 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:55 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.2012/07/26 16:20:03 [STATUS]Disconnecting...2012/07/26 16:20:17 [STATUS]Tunnel is disconnected successfully.
    PLEASE I NEED HELP!!!!!! OR ANY OTHER OPTION TO ACCESS MY CENTRAL VPN GATEWAY
    Celestine
    Specstech Africa

    Discussions about the WRVS4400N is now being handled by the Cisco Small Business Support Community.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • Standard job, sap_ccms_moni_batch_dp, creates remote gateway

    I noticed that standard job, sap_ccms_moni_batch_dp, in our sandbox environment creates a remote gateway to our Production environment.  I'm thinking this is not a good thing.  I deleted all the standard SAP jobs and used the function in tcode SM36 to reschedule them.  They still create a remote gateway that seems to point at Production.   Is this an artifact of our recent system copy procedure to create our Sandbox?   How can I correct it?

    James,
    Did you run BDLS (Logical Name Conversion) after System Copy?
    Secondly you need to know if you need this job in your system.
    Please check the below link for more details. Please let us know if you still have some doubt.
    http://help.sap.com/saphelp_nw04/helpdata/en/be/44443c4a08ba26e10000000a114084/content.htm
    Regards,
    Sujit.

  • How to verify if Database gateway for DRDA is installed and configured.

    Hi All,
    How can we verify if Database gateway for DRDA is installed and configured.
    Our OS is AIX 5L 64 bit OS.
    Rdbms : 11.2.0.3
    Regards,

    Duplicated
    How to verify if Database gateway for DRDA is installed and configured.
    +-- thread locked --+
    Nicolas.

Maybe you are looking for