Adding roles for further participants.

Dear Gurus,
I need to add roles in multiple selection option for Furhter Participants in PHAP_CATALOG configuration screen under participants tab.
Please let me know how to do this?
This configuration is required as whenever the appraisal document is created, it should have two supervisors as further participants
Thanks
Prakash.

Hi,
Could you please share the solution?
Regards,
Deepti R

Similar Messages

  • Change mode for 'further participant;' in appraisal document

    hi!
    My goal is to change HAP_DOCUMENT BSP to allow Further Participants(FP) to change goal setting and appraisal documents.
    for this i am changing the page document.where.participated.htm  to enable the FP to change document(employee columns ONLY (objectives, checkboxes, employee assessment))for this i redirected the next page to 'change documnet'. Now i am able to change the appraisal document when i login as a further participant and if i am both the appraiser and apparisee. For the appraiser documents for which i am not the appraiser and appraisee, i am not able to change the fields in the document. I did some reasearch on this and came to know that some badis need to be used for this functionality.
    Please advice If anyone came across such scenario.
    Any help would be greatly appriciated.
    Thank you
    manasa
    Message was edited by: manasa

    >hi jothi,
    >i tested the page from the BSP application and it is >working fine. i did give this page as the start page for >the link in the portals but if i log into portal and
    >test the page somehwere the processing mode is set back >to blank and so it is nt working. but if i test it from >bsp the processing mode is 'X'(which i set in the BSP).
    >Please suggest me.
    It's Strange. Where you have impleneted the Col Access Code..in the BADI / in ur BSP Page itself?
    The objective Settings also can be controlled by COL_ACCESS BADI.Find out the name of the columns in HRHRAP* Tables & change the visibility.
    Rgds,
    Jothi.

  • Appraisal document for further participant

    Hi,
    We are using Objective setting and Appraisal on EHP4.  We are using the standard web dynpro iview.
    The process flows between Employee and Manager and the Higher manager is able to view the appraisal template.  Our problem is that Employee and Manager is able to view the template in their respective iviews ie. through ESS and MSS, but in case of further participant who is higher manager is able to view the template in ESS and not in MSS.
    Is this the standard way that the further participants are able to view appraisal in ESS ?
    Shrikant

    Hi,
    Yes, appraissees and further participants access the appraisals via the ESS role and appraisers by the MSS role.
    Regards
    Nicole

  • OSA - Concept of Further Participant

    Hi All,
    I am new to OSA module and is a little confused with part appraisals and further partipant. Base on english explanation "Further participants are those that have an interest in the document but are not directly responsible for the appraisal process. For example an higher manager or an HR responsible. "
    Anyone can help to clarify the difference with example of what part appraisal can do and a further participant cannot do in system point of view.
    Thanks for your assistance to this new entrant to OSA.
    Thank you
    Audrey

    > Some examples seen at different customers for Further
    > Participants:
    >
    > - HR responsible
    > - Higher Manager
    Maurice,
    We are currently blueprinting for a customer; we foresee use the OSA iview (overview screen) where the higher manager gets the list of sub ordinate teams by default. We did not had to add the higher managers as further participant.
    <b>Am I right to say</b> that the concept of further participants can also be achieved with appropriate Views and function modules/evaluation paths behind them (such as the HAP_ALL view). Or is there a nuance?
    regards and vriendelijke groetjes too,
    Bert

  • Custom role for adding functional position.

    Custom role for adding functional position.
    I added a custom role for to allow only OrganizationDesigner capabilities. I could see functional positions but I could not modify or add them. What permissions I have to assign to role for adding and modifying functional position in organization designer.
    I tryed everything bot noting works unless I give site addministrator privilages to the user.

    Hi Indulis,
    I have just replicated the behavior you are describing in our training environments. This is not the expected behavior. I will immediately open a case with Customer Care, and I suggest you do the same.

  • Add "Further Participant" in PMP Appraisal Document

    Dear experts,
    I need to add "Further Participant" in PMP Appraisal Document but not directly/manually.
    I am checking if there is any Function Module which I can use in Custom Report to add Further Participant to respective Appraisal Document.
    I have tested FM "HRHAP_DOCUMENT_MODIFY" and passed the required input to it, however instead of adding given Further Participant to the document, this FM is deleting the particular document.
    Any helpful suggestion would be highly regarded.
    Regards,
    SAP HR User.

    Hi,
    The PMP process (the predefined) is not really ment to behave this way, I am not even sure if it includes further participants.
    So I just assume you use the flexible one instead, from a program flow logic it will be the same anyway.
    What you need to do is:
    - Get Appraisal
    - Add Further Participant
    - Save
    - Dequeue
    So, assuming you have all the appraisal id's already available. Loop over the appriasal ID's and for each one do
    HRHAP_DOCUMENT_GET_DETAIL, make sure your in admin mode and you need to decide if you want this registered in teh action log. But make sure your in admin mode!
    You need to capture ALL export fields, we need them later on.
    One of the exlporting parameters is T_HEADER_OTHERS. Add to this your further participant.
    Then call HRHAP_DOCUMENT_SAVE
    Then HRHAP_DOCUMENT_DEQUEUE
    finished, next appraisal id.
    Regards and Groetjes,
    Maurice Hagen

  • How do i transfer a project to a cd for further mastering?

    i know this is a simple question but how do i transfer a project to a cd or dvd-r for further mastering?also i am thinking about getting a macbook and am wondering how i would transfer my work in logic 8 on the imac to a brand new macbook?

    Hi,
    1st: If you want to give your project to a studio, give them the whole Logic Project if they have logic, too. Once it is bounced, they can't to more than tweak the final mix.
    If you have to bounce it for the studio, bounce it with 24 bit PCM and inportant : Do not use dithering! This step will added by the studio after mastering.
    2nd: To export a project, make shure all Audio, Samples and all these things are saved inside the project folder. There is an option in the preferences when you make a new project. Try this out.
    Fox

  • Help Required in Authorization Roles for Workbooks

    Hi All,
    In our project, we have a requirement of creating a role for users with below authorizations.
    1.     Can display and execute the workbooks in the role menu.
    2.     Can create copy workbooks ( Save as) in the role menu.
    3.     Can not delete the original and the copy workbooks from role menu.
    We are using an authorization object S_RS_FOLD with u2018FALSEu2019 for restricting the user from deleting workbooks.
    We also need to add one more object S_USER_AGR (without u2018Deleteu2019 property) to give the authorization of creating copy workbooks in the role menu.
    Object S_RS_FOLD this is working fine without S_USER_AGR. But after adding S_USER_AGR (without delete property), user is again able to delete the workbooks.
    So how can we achieve both the functionalities where user can not delete the workbook but can create copy workbooks in the role menu.
    Thanks,
    Sachin

    Re: Adding report (query & workbook, templates) in roles
    Go through this thread.
    And in our Project we have created one role for accessing workbooks. in that end user can access the work book but saved one and user cannot resave or delete the work book.
    we have added Auth objects S_TCODE and S_GUI.
    in S_TCODE we have added RRMX and in S_GUI we have given 60(IMPORT) access to the users.
    So that they can just share the workbook. nothing else can be done.
    Try like this. Hope this would help you.

  • Use of Further Participants in an Appraisal Template

    Hi experts,
    What is the use of Further Participants in an Appraisal Template?
    I have designed appraisal templates which have two levels of appraisers, but did not use Further Participants in it.
    When should be Further Particpants used and when is that it should not be used?
    Can somebody please explain?
    Best regards,
    Swapna.

    Hi Swapna
    appraissees and further participants access the appraisals by the ESS (Portal)  role and appraisers by the MSS role. So they appear in different overview screens.
    best regards
    Martin

  • What is ESOA? What is the Scope/Role for Functional Consultants in eSOA.

    Hi Experts,
    1)     Does eSOA is a tool, application or module?
    2)     What is the relation between eSOA and ECC6.0?
    3)     What is the Scope/Role for Functional Consultants in eSOA?
    4)     What I have to learn in eSOA?
    5)     How it is useful for Functional Consultant?
    6)     How it is useful for Customers?
    7)     How much time it will take to learn eSOA?
    8)     Where can get the Material?
    9)     What all technologies I have to learn before I learn  to eSOA?
    I am working as a SAP HR Consultant. If I want to learn eSOA what are the pre-requisites.
    I donu2019t know anything eSOA.
    Please give me the answers.
    Regards,
    Ram

    Hi Ram,
    See the answers below
    > 1)     Does eSOA is a tool, application or module?
    ESOA is not any tool,application or module. Its a methodology/Architecture
    > 2)     What is the relation between eSOA and ECC6.0?
    ECC 6.0 provides some Enterprises Services through enhancement packages.
    > 3)     What is the Scope/Role for Functional Consultants in eSOA?
    FUnctional consultant should know which ENterprise Serrvices are available and which should be developed to carry out a business process.
    > 4)     What I have to learn in eSOA?
    .         Being a technical guy, there are things to be learnt like ESR, implementing designed serivces through ABAP or Java and consuming it. But being a functional guy, only awareness of what enterprise services are available and what they do and their input/output params and how they can fit into a business process is sufficient.
    > 5)     How it is useful for Functional Consultant?
    see above
    > 6)     How it is useful for Customers?
    Customers can move towards Service Oriented Architecture, get flexibility in changing a business process easily, maintaince cost is less
    > 7)     How much time it will take to learn eSOA?
    depends on your skills
    > 8)     Where can get the Material?
    lot of material in SDN
    > 9)     What all technologies I have to learn before I learn  to eSOA?
    ABAP or JAVA,ESR ( being a technical consultant) , Web Services
    > I am working as a SAP HR Consultant. If I want to learn eSOA what are the pre-requisites.
    you should aware of basics of service oriented architecture
    If you further want to clear doubts, do write up.
    Regards,
    Piyush

  • How to create Users/Roles for ldap in weblogic without using admin console

    Is it possible to create Users/Roles for ldap in weblogic without using admin console? if possible what are the files i need to modify in DefaultDomain?
    or is there any ant script for creating USers/Roles?
    Regards,
    Raghu.
    Edited by: user9942600 on Jul 2, 2009 1:00 AM
    Edited by: user9942600 on Jul 2, 2009 1:58 AM

    Hi..
    You can use wlst or jmx to perform all security config etc.. same as if it were perfomred from the admin console..
    .e.g. wlst create user
    ..after connecting to admin server
    serverConfig()
    cd("/SecurityConfiguration/your_domain_name/Realms/myrealm/AuthenticationProviders/DefaultAuthenticator")
    cmo.createUser("userName","Password","UserDesc")
    ..for adding/configuring a role
    cd("/SecurityConfiguration/your_domain_name/Realms/myrealm/RoleMappers/XACMLRoleMapper")
    cmo.createRole('','roleName', 'userName')
    ...see the mbean docs for all the different attributes, operations etc..
    ..Mark.

  • Adobe User Research looking for Seattle Participants - $150

    Adobe User Research is looking for participants to take part
    in an upcoming study about their digital video/audio software use.
    This study will be a two-hour, one-on-one session about your
    digital audio/video software use in our Seattle office. To show our
    appreciation for your participation, participants will receive a
    $150 AMEX Gift Cheque.
    If you’d like to be considered to participate, please
    fill out the survey link below:
    Adobe
    Research Study - link will lead to a 3rd party website
    Session dates/times will be the following:
    Monday (11/12) - 3PM
    Tuesday (11/13) - 9AM, 12PM, 3PM
    Wednesday (11/14) - 9AM, 12PM, 3PM
    Thursday (11/15) - 9AM, 12PM
    We will review your responses and notify you if the study is
    a good match. Please let me know if you have any further questions.
    Thank you!
    Tim Toy
    Customer Research Recruiting Specialist
    [email protected]
    Adobe Systems, Inc.
    801 North 34th Street
    Seattle, WA 98103

    Pity, cause I would like to participte. I value my Adobe products and what to help improve them.
    Consider online studies too... :-)

  • Role for a particular Transaction

    Hi,
       How will I know the role for a particular Transaction?
    like , I need to know the role of Transaction PFCG coz i dont have access to this Transaction now.....

    Vamsee,
    If you dwell down to the bottom of the access/authorizations/profile/roles etc what ever you call....you have something called authorizations.
    If you are talking about a particular transaction a custom one or a standard one, there is an auth. group assigned to it. Basis is the team which creates auth. objects and they create a profile which are infact added to the roles.
    These are the roles which are added to the user ids of the people using the system.
    Different roles which give us different authorizations to work with in the system.
    Hope I made my point clear.
    One more important thing is, you cant just ask basis to assign a particular profile or role which you might have found by some means like SU53. Because a tcode can be there in many roles or profiles. It is up to basis to decide what role they have to assign based on what authorizations you need. The profile or role which you might have found out may contain other auth's for other tcodes which basis may not want to offer.
    Thanks,
    Message was edited by: Naren Somen

  • Assigning Roles For  XI Developer in SU01

    Hi Experts,
    After We Create a User in SU01, We have to Assign the Roles to that Created User.
    What are the Roles we should Assign for the XI Developer Users...
    Please Help me in this ....
    Regards
    Khanna

    Hi Rajesh
    the necessary roles to be provided for a developer in XI system are mentioned below.
    SAP_SLD_DEVELOPER
    SAP_XI_DEMOAPP
    SAP_XI_DEVELOPER_ABAP
    SAP_XI_DEVELOPER_J2EE
    for further details, visit the link given below...
    http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
    Cheers..
    Vasu
    <i>** Reward Points if found useful **</i>
    Message was edited by:
            Vasudeva Rao . Vonkolu

  • Appraisal Document not visible to further Participant

    Hi Members,
    I have used three participants in "category" option of Appraisal template.
    1. Appraisee  - Employee
    2. Appraiser  - Supervisor
    3. Further Participant - HOD
    In Enterprise Portal , i am using a BSP page (from SE80 --> BSP Application --> HAP_Document_Pa --> Pages with Flow Logic --> documents_todo.htm) in MSS, earlier the HOD was able to find the appraisal document, but for unknown reasons, now the HOD is not able to find the appraisal document.
    And in criteria Group, though i have given the change option to Supervisor through element access and display option to Employee and HOD, but even the supervisor is not able to make changes in the criteria group, as the text box is displayed in grey (non editable mode).
    Kindly help me know the reason and solution, so that HOD could complete his part of review from his MSS screen.
    Regards

    Hi Lincoln,
    Thnx for responding.
    Yes a separate Iview is created to call the BSP page, and we have used "documents_todo.htm" and even the supervisor (in Review) and HOD (In Process) were able to view the appraisal document as and when the statuses changes, because the BSP page "documents_where_participated.htm" shows the appraisal documents even if the document is with employee or supervisor.
    About the value of i-view parameter MODE as X, do you mean "parameters to pass from Page Request (for URL isolation)" is not set as 'X', as the portal guy is not available at the moment, me being a functional consultant, i also need to fix the BSP issues through Portal.
    But i want start afresh, when the appraisal document is "in planning", the document should be available with the employee, when the appraisal document is in "In review" stage, the document should be available with the Supervisor, when the appraisal document is in "In Process" stage, the document should be available with the HOD.
    Plz suggest the BSP's for employee, supervisor and HOD, correct me if i need to make any corrections in the statuses or participants.
    Regards
    Edited by: nivedita chowdary on Jun 25, 2009 7:05 AM

Maybe you are looking for