Adding Search help to view BuPaSearchB2B fields

hii
i am working in CRM UI7 system.
and i want to add a search help to Account id in component 'ICCMP_BP_SEARCH' view'BuPaSearchB2B'
can u help me
Best Regards
Owesat Ehsan

Hi Owesat,
You can try implementing BUPA search help in your attribute V-Method.
Check the following link to get the how-to-guide to work this in the GENIL:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0646247-efe2-2b10-3b99-c1a12ef2d752
You can check also Caíque Escaler answer at the following link, for a example with a search help implementation.
Kind regards and good luck,
Garcia

Similar Messages

Adding search help to standard SAP field

Hi Experts,
I need to add search help to field ZUONR i.e assignment field in various tcode like fb70,fb60,f-02.etc which will select data from
Z tables . I have found out serach help exit F4IF_SHLP_EXIT_EXAMPLE but as per my knowledge that is to change existing standard search help.But to field ZUONR there is no search help attached.How can new Z search help be added to field ZUONR without use of access key.
Please suggest.
Regards,
Kaustubh Kabre.

Hi,
I don't know how to change "Value table" field on domain without access key, but if nothing else work, you can add new fixed values. From menu Goto->fixed value append.
Other possibility is to use GuiXT -> write script that will call your FM that will get data from your table and show them.
Best regards
Marcin Cholewczuk

Adding new field in search help result view

Dear Experts,
I want to include one more field in search help result. The field shoud give description.
How can i do this in UI result view?
If I try to add attribute in result view, the result view is of type table, and it does not allow us to add value node. It will allow us to add model attribute. If I add attribute in search help resut table view then will i be able to see it in table form.
Thanks and regards
Pankaj Kumar

Hi Pankaj,
Its not that difficult.
There are two ways
1. You can enhance your Result BOL object through EEWB and append your z-field to std. BOL result object. This then appears automatically for your result context node and then you can pull it to the view in config tool.
2. Directly go to your context node class (CN00 , CN01 etc ) , now copy method GET_S_XYZ , paste it and rename as GET_yourfieldname. Similarly copy SET_S_XYZ, GET_M_XYZ and GET_I_XYZ and paste and rename. Once activated. Quit the component browser completely. Open again using bsp_wd_cmpwb. open you view and then your node. You can find you new attribut present as struct.YourField.
You can then copy code from available setter-getter methods for this attribute. You must handle setter getter by urself in this case. In may std. nodes, this is done for description field. I have personally done this for product descripton field.
if you dont want the field to be part of structure ( i.e. as struct.Yourfield ) then you can also copy paste GET_XYZ, SET_XYZ methods. your filed then do not appear as Struct.YourField but it just appears as YourField name under context node.
Hope this helps you.
Thanks & Regards.
You can check PRODUCTDESCRIPTION attribute of BTAdminI node of BT115QIT_SLSQ/Items view of BT115QIT_SLSQ component. They have added it the same way as i described above. You see the GET_ method to see how they are retrieving product description. In my object, i wrote direct query to Comm_prshtext table to retriev short_text by passing product guid and then assigen it to value variable of Get method.
Edited by: suchita P on Sep 20, 2008 2:22 AM

Adding search Help - In the transaction MIGO for the Field WEMPF.

Hi All,
In the Transcation MIGO there is a field - Good Recipient ( WEMPF ) -this does not have any F4 help.
Now i need to create a search help for this field.
Can any one suggest me how to proceed.
I am thinking about -- creating a search help - and assigning it to a data elemet(WEMPF) of that field.
is this a right way. if so please guide me the steps to do.
Thanks in advance.
Guru

hie
to add a search help to a particular field u need to get the table name where that field is located. secondly go to se11 and enter an appropriate name for your search help, allocate the table where values are going to be taken as well as the search criteria. Afterwards to the table where WEMPF is and on the search help enter your custom search help. save and activate and you shud try MIGO once more and the field WEMPF should have an F4 help.
regards
Isaac Prince

PCUI 4.0, Search Help Required for New field

Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
Asad

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in <b>Entry Help/Check</b> of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

SRM Portal - Search help for a custom field

Hi,
I have added a custom field to the SRM Portal (5.0) shopping cart, by adding the field to structures INCL_EEW_PD_ITEM_CSF INCL_EEW_PD_ITEM_CSF_SC.
However, I need to filter the search help for that custom field, based on values & relationships stored in a Z table.
Is this possible? How? Please help.
Thank You.

Currently, my idea would be to create a search help for the custom field & filter the values in a search help exit. However, would I be able to get other field values (standard) from SRM into my search help exit?

Search help at a structure field does not appear

Hi there,
i have created a customer own search help and for a first try i have assigned it to a screen field. This worked propperly but i receive values for three fields (document number, company code and fiscal year) from that search help - what has been succesfully testet in SE11 and worked ok.
To assign all exporting fields to my screen I deleted the search help at the screen field and I created a copy of RF05L structure and assigned my search help to the document number there. My screen fields belong now to a structure and the type of that structure is my version of RF05L, at first with type, later changed to like.
So my screen field must have the search help from that structure, but it has no search help at all.
After some trials I deleted my field from the screen and added it again based on my structure and changed the name to my internal structure name for the document field. This was the only trial where the search help appeared afterwards but as I did the same to the two other fields it disappeared again and I could not make it visible until now.
What shall I do?
Thank you in advance for any hints.

Hi Axel,
When you are adding the screen fields - are you sourcing them from the Program OR Data dictionary.
You should source it from the Data Dictionary and ensure the screen fields attribute "From Dict." checkbox is marked in the "Dict" tab.
Hope this helps.
Regards,
Aditya

Search help to populate mutiple fields

Hi All,
I have a problem with standard collective search-help CLCITYNAME which I added parameter POST_CODE1 type IMPORT and EXPORT. I then create elementary search-help Z_CITY_NAME, which is included into collective search-help CLCITYNAME, which has parameter POST_CODE1 type IMPORT and EXPORT.
This collective search-help CLCITYNAME is called in transaction XD02 on F4 of the CITY field. The added search field POST CODE is showing but selected post code value is not passed to the screen. WHat can I do to pass the selected post code to screen.
Pls help.
POints will be rewarded.
Thanks.

Hi,
For the data to flow from search help attached to screen,the search help and the screen field should be created with same dataelement.And the parameter "EXPORT" should be checked while creating the search help.
Regards,
Ajith

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

Search Help for Infotype Custom Field

Hi,
I have created a search help for a custom field in an infotype. What would be the best way of filtering the help selection based on infotype values such as molga, begda, endda?
Thanks in advance.
/Elvez

Hi Nishanth,
thanks for your reply, perhaps I should clarify my question:
1) I have a custom field in an infotype
2) I have a table containing the search help information
3) I assigned a search help to the custom field
4) I have activated a search help exit
The problem is that the information that I get from the custom field is not sufficient for making the selection. Therefore, I would like to somehow get hold of the addition information, such as BEGDA, ENNDA, MOLGA, to do a proper selection in the search help exit. How can I achieve that?
I read something about function module DYNP_VALUES_READ -would it be possible to call this function module from my search help exit and thereby reach my goal?
/Elvez
Message was edited by: Elvez

Custom Search Help for Business Agreement field in transaction BP.

Dear Experts,
My requirement is to add Custom search help to Businees Agreement field (BUPA_CRMM31-BUAG_ID) in transaction code BP.
PLease guide me how to add Custom search help to Businees Agreement field which dont have search help option.
Regards,
Bala

Hello there,
I think the requirement/question is not very clear in your post.
However, the segment Java applet calls a CRM class which has related code and methods.
Class: CL_CRM_MKTTG_SEGAP_COM
Package: CRM_MKTTG_SEG_APPLET.
Please explain the problem in detail.
Regards,
Vinamra.

Search help for a Input Field........

Hi,
I'm fairly new to BSP and I would like to know how to attach Search Help to the Input Field in BSP application.
Thanks
NP.

Hi nagendra
Search Help for input field Provide using attribute of input field is showHelp and onvaluehelp
This is providing the search help .

Change Search Help for Payment Terms Field

Hi,
I would like to change the Search Help for Payment Terms Field, in Customer Master (KNVV-ZTERM). and in Sales Document. I believe it is the same.
Default is From Table T052 / T052U
ZTERM and TEXT1 Fields
I would like to have
From Table TVZBT
ZTERM and VTEXT
PayT Own Explanation Field.
Can we change the Search Help.

Hi,
The search help for the payment terms is not coming from the DDIC search help..
It is coded in the process on value-request event...
The function module FI_F4_ZTERM is called for this..you have to change this function module in case if you want the values from a different table..
OR do implicit enhancement in the subroutine FORM HELP_ZTERM in the include MF02DFH0 to call your search help instead of the function module FI_F4_ZTERM ..And do the same for the sales order also..
Thanks
Naren

Dynamic Search Helps In An Input Field

Hi Experts,
          I need to populate an input field with different search helps based on the user action i.e when user selects "Audit" i hav to show the audit search help for my input field, when he selects "Audit Plan" i would hav to show audit plan search help.
My Questions >
1> i intend to use the method set_attribute_value_help of the interface if_wd_context_info and do the coding as :-
data lo_nd_info type if_wd_context_node_info.
lo_nd_info = lo_nd->get_node_info( ).
CALL METHOD lo_nd_info->set_attribute_value_help
        EXPORTING
          name            = 'identification' (attribute Name)
          value_help_mode = '121'
          value_help      = 'plm_auditplan'.(Help Name)
Is this the correct way to go if not plz suggest a more appropriate method.
2> in the context for that attribute ,what should i specify for the property input field
    Input Help Mode
    i.e should it be deactivated , automatic or should i give the dictionary serach help and specify one of the search helps by giving its name.
Your responses will be greatly appreciated,
Chaitanya.

Hi Ebru,
Yes, it is possible using OVS, freely programmed and dictionary help.
For OVS, refer this blog: /people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap
For Dictionary Search Help, refer http://help.sap.com/saphelp_nw70/helpdata/EN/47/9f724642314aabe10000000a42189b/frameset.htm
For freely programmed, refer:
http://help.sap.com/saphelp_nw70/helpdata/EN/47/9ef8cc9b5e3c5ce10000000a421937/content.htm
I hope it helps.
Regards
Arjun

Adding Search help to view BuPaSearchB2B fields

Similar Messages

Maybe you are looking for