Adding Selection Options Fields in Report(Using Query)

Hi,
how can we add Selection Fields Options in Query Reports Which we create using SQ01. I need a default option by which we can add all the selection option given by user.
Anybody can help me..?
Regards
lijo Joseph

Do you have anything defined in the 'Calcs' section?
If so, any fields returned by the query that are not included in the calculation will be automatically added to the Group fields (using the same logic as required with calculations/group by in any SQL query). The fields won't be able to be removed from the Group list unless the Calc is also removed.

Similar Messages

Add select-option fields in report category (PNP)

Hi,
I am trying to create a new report category based on the logical database PNP.
I noted that the fields available for select-option for report category come from infotype 0 or 1. Is there anyway to include fields from other infotypes ?
Thank you.
Regards
Kir Chern

Hi Kir Chern
Due to the structure of the logical database you can just insert selection fields that are bestowed.
However, as Charles mentioned, you can add selection fields special to your program by coding a selection screen at your program whose fields are inserted just after the ones added by the report category.
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

How can i used pai in screen 1000 to change the select-options field?

hi,all.
I want used pai to change the select-options field,but it can't works.
the mainly code is:
REPORT ZTEST99.
TABLES :MARA,MAKT,MARC.
SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TITLE0 .
select-options:s_matnr for mara-matnr,
               s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF BLOCK B0.
parameters:p_flag as checkbox.
at selection-screen OUTPUT.
   LOOP AT SCREEN.
   IF P_FLAG = 'X' .
   IF screen-group1 = 'ID1'.
         screen-input = '0'.
    ELSE.
      screen-input = '1'.
    ENDIF.
    MODIFY SCREEN.
ENDIF.
    ENDLOOP.
START-OF-SELECTION.
CALL SCREEN 1000.
when i click p_flag,then i want to change s_werks from OBLIGATORY to no OBLIGATORY.
how can i realized?
Thanks for all.
Sun

Hi ,
change your code like this.
Change in your code:
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : s_matnr for mara-matnr,
s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF SCREEN 100 .
At selection-screen.
if sy-dynnr = '100'.
IF P_FLAG = 'X' .
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = '0'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
else.
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = 1.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
my code :
REPORT Z50871_SELECTOPS_DYNAMIC.
PARAMETERS : CH_EBELN AS CHECKBOX,
             CH_VBELN AS CHECKBOX.
DATA: V_EBELN TYPE EKKO-EBELN,
      V_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : EBELN FOR V_EBELN MODIF ID G1,
                 VBELN FOR V_VBELN MODIF ID G2.
SELECTION-SCREEN END OF SCREEN 100 .
AT SELECTION-SCREEN OUTPUT.
IF SY-DYNNR = 100.
    IF CH_EBELN = 'X' AND
       CH_VBELN = ''.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_VBELN = 'X' AND
       CH_EBELN = '' .
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G2'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_EBELN = 'X' AND CH_VBELN = 'X'.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'
           OR SCREEN-GROUP1 EQ 'G2' .
          SCREEN-ACTIVE = '1'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF SY-DYNNR = 1000.
IF CH_EBELN = 'X' OR CH_VBELN = 'X'.
    CALL SELECTION-SCREEN 100.
ELSE.
    MESSAGE I000(Z50871MSG) WITH 'Please select atleast one checkbox'.
ENDIF.
ENDIF.
regards
Sandeep Reddy

Report Using Query

Hi Gurus,
In Lead Transaction, Details Tab there is field called Campaign, i req. the table name for that field bec. i have to generate the report using Query?

Hi Milind,
Create a new Transport Request.
Now Go to RSA1->Transport connections, select your query and drag to the Right hand side.
Now select all the query elements for that query and click on the Truck (Transport button), It will ask you for the transport Request. Provide the Transport Request Number you have just created.
Once done, just to be sure, check the Transport requests elements in SE09. Check if all the query elements have been included in the report.
Now you will be able to modify the query in Query designer. If still not able to, then you must missed some of the query elements. Again check this in Transport Connection.
Regards,
Pratap Sone

Disable the Select-options field in the viewcontainer

Hi,
I have two select option fields(Date,Number) in a viewcontainer .
Now i need to disable one of the select-option field(Date) in the view container based on the condition.If I give Enability for the view container then both the select options will get diasbled.Is there any way to disable only Date select-option field in the view container.
Thanks in Advance.
Regards,
bala.

Hi,
I just tested this solution and it is working for me....Following on Thomas's suggestion...I did the following....
I just had one select-option on my scr...but it can be done with two too...
step1:
created three attributes at component level under the attribute tab ( as suggested by Thomas )
ENABLE_PRI_SELECTOPTION type WDY_BOOLEAN
M_HANDLER type ref to IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type ref to IWCI_WDR_SELECT_OPTIONS
Note: all are with public check box checked....so that all your views can see these attributes
I created a method at componenet controller leverl: create_select_option....in this method i have following code:
DATA:
lt_range_table TYPE REF TO data,
* rt_range_table TYPE REF TO data,
read_only TYPE abap_bool,
typename TYPE string.
DATA:
lr_componentcontroller TYPE REF TO ig_componentcontroller,
l_ref_cmp_usage TYPE REF TO if_wd_component_usage.
* create the used component
l_ref_cmp_usage = wd_this->wd_cpuse_select_options( ).
IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
 l_ref_cmp_usage->create_component( ).
ENDIF.
* get a pointer to the interface controller of the select options
*component
wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ).
* init the select screen
wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
* create a range table that consists of this new data element
lt_range_table = wd_this->m_handler->create_range_table(
i_typename = 'PERSNO' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'PERSNO'
I_VALUE_HELP_TYPE = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
I_VALUE_HELP_ID = 'ZHELP_WDA_PERNR'
I_NO_INTERVALS = abap_true
it_result = lt_range_table
i_read_only = wd_this->ENABLE_PRI_SELECTOPTION ). <-----pls see here how i am controlling the read only property
I assume you know this much...already....but i am just putting everything down....
step2:
in my view where i want to display the select-options....i added this code under my wddoinit method
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
lo_componentcontroller = wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->ENABLE_PRI_SELECTOPTION = abap_false. <--pls see initially we want this field to be open
lo_componentcontroller->create_select_option(
step3:
i did not have much logic to control the select option field so i added a button which if user presses the field become disable...
under that button action method i added the following code:
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
lo_componentcontroller = wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->ENABLE_PRI_SELECTOPTION = abap_true.
 "<---pls see here how i am changing the global *attribute which Thomas has suggested for controlling the "read only" attibute for the select-option field....you can put this under *your "if" statement....
"this step is very important if you do not remove the field you will get the dump...since it will try to add the same field again
"which produces dump from system....
lo_componentcontroller->m_handler->REMOVE_SELECTION_SCREEN_ITEM(
i_id = 'PERSNO' ).
"now call the same method which we created at component level to create the select_options...
lo_componentcontroller->create_select_option(
that is all....it works great for me.....let us know if still have any questions....
Thanks...
AS...

How to write in selection screen after the select option field?

Hi
Please help me with this...
i need to write format of date after the select option field in the selection screen.
its like..
date ___________ to ___________ yyyymmdd
points will be awarded..
thanx

Use selection-screen comment 1(31) text-005 -> this will give you format option.
See the below sysntax ,you have to use like this
Selection-screen begin of block b2 with frame title text-002.
selection-screen begin of line.
selection-screen comment 1(31) text-004.
parameter: r_1 radiobutton group rad1.
selection-screen end of line.
selection-screen begin of line.
Aging Report
selection-screen comment 1(31) text-005.
parameter: r_2 radiobutton group rad1.
selection-screen comment 40(30) text-003.
parameter: p_expir as checkbox.
selection-screen end of line.
selection-screen begin of line.
Materials with no Expiry Date
selection-screen comment 1(31) text-006.
parameter: r_3 radiobutton group rad1.
selection-screen comment 40(30) text-007.
parameter : p_bin as checkbox ."default 'X'.
selection-screen end of line.
selection-screen end of block b2.
selection-screen end of block b0.

Initializu00EDng select options field with default values and with NO INTERVALS

Dear All,
I have used WDR_SELECT_OPTIONS technology within WD Abap.
I also have added the fields which have to be taken into consideration.
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'PLANT' ).
wd_this->m_handler->add_selection_field(
i_id = 'PLANT'
it_result = lt_range_table
i_read_only = read_only ).
Can I assign two values to this field 'PLANT' whereby the user may take only these values.
I mean kind of pre initializíng of this select options field with default values.
Due to this handling it should be prevented that the user can give other values
except this values.
Additonally it should be fine whether it is possible to disable the second input field
of this select options field like NO INTERVALS .
Regard
sas
Regard
sas

wd_this->m_handler->add_selection_field(
i_id = 'PLANT'
it_result = lt_range_table
I_NO_INTERVALS = 'X'
i_read_only = read_only ).
Pls check 'WDR_TEST_SELECT_OPTIONS' web dynpro component

Select-option field on module pool screen

hi all,
Can anyone pls let me know, how to design and use a field like a select-option field on a Module-pool screen i.e. how can i get that multiple selections tab after the high field of the select-options.
thanks in advance,
vinny

All you need to do is define your selection screen and then embed it in a subscreen area of your dynpro(screen). Here is a sample program.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
 p_rad2 radiobutton group grp1,
 p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
 s_matkl for mara-matkl,
 s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*& Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Screen screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards,
Rich Heilman

Freely Programed Help for select-option field

Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM

>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ?

Authorization check for select-options field - Company code.

Hi experts,
i have company code field on the report selection screen and i have to validate the authorization check for BUKRS.
How to do authorization check for a select-options field?
Any function modules used to write the authorization check for a SELECT-OPTIONS FIELD?
Thanks.

>
RNB wrote:
> Any function modules used to write the authorization check for a SELECT-OPTIONS FIELD?
Does it hurt to type a few lines of code? Why do you need an FM for this my friend?
Anyways can you please tell which SAP application area (viz. FI, SD etc.) do you want to run the report?
Suhas

Call Transaction and fill a select-options field with more than one value?

Hello everybody,
how can I fill a select-options field with more than one value.
Here is the code example:
CLEAR: GT_BDCDATA, GS_BDCDATA.
GS_BDCDATA-program = 'RHALEINI'.
GS_BDCDATA-DYNPRO = '1000'.
GS_BDCDATA-DYNBEGIN = 'X'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
GS_BDCDATA-FNAM = 'PCHOTYPE'.
GS_BDCDATA-FVAL = 'P'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
LOOP AT gt_hrobjinfty INTO gs_hrobjinfty.
    GS_BDCDATA-FNAM = 'PCHOBJID-LOW'.
    GS_BDCDATA-FVAL = gs_hrobjinfty-objid.
    APPEND GS_BDCDATA TO GT_BDCDATA.
    CLEAR: GS_BDCDATA.
ENDLOOP.
CALL TRANSACTION 'PFAL' USING GT_BDCDATA MODE 'A'
                   MESSAGES INTO GT_MESSAGES.
THX.

Hi,
Please refer the code below:
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
Thanks,
Sriram Ponna.

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

Default Current year in select option field on selection Screen

Dear Experts,
I want to set current year as default value in fiscal year select-options field on selection screen.
for this, i hv written following code
DATA:VAR_DATE TYPE SY-DATUM.
DATA VAR(4) TYPE C.
VAR_DATE = SY-DATUM.
VAR = VAR_DATE+0(4).
this retrieves current year .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT VAR TO VAR..                            "Fiscal Year
SELECTION-SCREEN END OF BLOCK B1.
Now when i am executing program pop-up is raised describing "Specify the range Limits". Please help.
Regards,
Apoorv Sharma

>
Ganga Bhavani R wrote:
> Use below lines.
>
> SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
> SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT SY-DATUM+0(4). "Fiscal Year
> SELECTION-SCREEN END OF BLOCK B1.
Hi, Ganga,
I think it will not working properly that way, Please test the bellow Sample Code.
TABLES: anlc.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS i11 FOR anlc-gjahr .
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
IF i11[] IS INITIAL.
    i11-low = sy-datum+0(4).
    APPEND i11.
ENDIF.
Thanks and Regards,
Faisal

F4 help FOR A SELECT OPTION FIELD

Hi,
Can anyone tell how to provide F4help for a select-option field?
Regards,
Hema

Hello,
If you created a search help in the DDIC...Then check the check box EXPORt parameter for one of the fields
If you used the function module Make sure you pass the correct values..Also the field name in CAPITAL letters..
Check this code..
TABLES: T005T.
DATA: BEGIN OF t_t005 OCCURS 0,
 land1 TYPE t005-land1,
 END OF t_t005.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(6) v_text FOR FIELD P_LAND1.
PARAMETERS: p_land1 TYPE t005-land1.
SELECTION-SCREEN COMMENT 13(35) v_text1.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_text = 'Country'.
v_text1 = ' '.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_land1.
REFRESH: t_t005.
SELECT land1
 INTO TABLE t_t005
 FROM t005.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
* DDIC_STRUCTURE = 'T005'
 PVALKEY = ' '
 retfield = 'LAND1'
 dynpprog = sy-repid
 DYNPNR = sy-dynnr
 dynprofield = 'P_LAND1'
 callback_program = sy-repid
 value_org = 'S'
 TABLES
 value_tab = t_t005
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Deepu.K

Select options fields at FuBa

How can I define select options fields as import paramter at Function Modules ?
Because I intend to pass select options fields to a FM in order to implement the below shown
code .
FUNCTION xyz
importing
ID
DESCRIPTION
CHANGING
 REFERENCE(ZSC_INFO) TYPE SC_INFO
select * from SC_INFO into corresponding fields of table ZSC_INFO
where
ID in so_id and
DESCRIPTION in so_des and
ENDFUNCTION

Hi,
The question is not completely clear to me but if you want to use the value of the select option and use it as an import parameter in a function module then some tips can be:
1. The value of the select option can be singles values or a range. Need to pick up the right values.
2. The import parameter and the variable you want to use must be of the same type.
DATA: tp_id TYPE <data type from the import parameter of the FM TEST>.
tp_id = so_vkorg-low "select option vkorg, you can use so_vkorg-high also for single values
CALL FM 'TEST'
IMPORT
 ID = tp_id
EXPORT
 DESCRIPTION = tp_description.
I hope that this is what you are looking for.
Best regards,
Guido Koopmann

Adding Selection Options Fields in Report(Using Query)

Similar Messages

Maybe you are looking for