Adding silence at at end on export

So I finally sat down to use version 3.01 for something (i've been struggling with app since v1...) and still 'Export' has problems.... I think I only keep using it because I bought Final Cut Studio and it cost so much!
My question is why does STP add silence to the end of my tack upon export (about 10 seconds)? I've set the end point of the project to 43 seconds but my exported files are still coming out as 53. Any ideas?
Thanks

do you have an effect tail as described on page 414?

Similar Messages

At the end of exporting Premiere freezes for a few minutes

Hi,
my computer is a i7 4930K @4,5GHz, 16GB RAM, 250GB SSD, Radeon 6950.
I was editing a 50 minutes long movie (cca 20GB source clips, cca 4,5GB output movie).
The export ran very well finishing after about 25 minutes but then Premiere froze with message "encoding, 0 seconds remaining" displayed and nothing seemed to be happening.
I realized the HDD activity was shining (not even blinking), the Widnows resource monitor reported cca 70-100MB/s transfer on my SSD (even though I think my SSD should be faster) and when I held F5 while looking into the export directory the output file was growing on capacity.
If I concider 70MB/s writing the task shloud be done in cca 1 minute. But it took I would say 5 minutes or even more finishing this task. RAM was not even fully used.
Is this behaviour normal?
How can I improve this? Is my SSD slow?
Thanks

Multiplexing is the process of interleaving the audio and video in a single output file. When you export with multiplexing set to None, you'll end up with the audio and video in separate files. That's probably not what you want.
That said, I suggest doing one export with the multiplexer set to None. If encoding then completes immediately upon hitting 100%, that confirms that multiplexing is what's adding time at the end.
What I don't know is how long multiplexing should take for a sequence of a given duration.
If you're so inclined, you could submit a bug report that the progress bar doesn't factor in the multiplexing time.

Save a pdf file without Adobe automatically adding "-Copy" to the end

How can I save a pdf file without Adobe automatically adding "-Copy" to the end of file name?

If you have actually made any changes (e.g. adding a Sticky Note or filling out forms), the Save button will appear in the bottom toolbar. It will save it as the same name.
"- Copy" is added only when you tap/click the Save As button. You can change it to something else, if you'd like.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

HT1347 When I add a folder to the library, does that mean that 'later' when I drop a new file into that folder (already added) it will automatically end up in iTunes? (or do I have to add file/folder to library every time I have a new file??) I'm using XP

When I add a folder to the library, does that mean that 'later' when I drop a new file into that folder (already added) it will automatically end up in iTunes? (or do I have to add file/folder to library every time I have a new file??) I'm using XP...

iTunes does not actively scan the media folders. If you manually add content to a folder, then you must add that content to iTunes manually via the File > Add File/Folder feature.
The only folder that gets scanned is the "Automatically add to iTunes" folder.

Error when IMPORT using INDEXFILE IMP-00009: abnormal end of export file

Hi,
I met the following error while I am doing IMPORT (creating ddl using INDEXFILE option) as.
imp system/oracle@hpfw9i file='F:\C2Prop\ProdDump20051109.dmp' fromuser=FWORKSADM touser=FWORKSADM indexfile=ddlfile.sql log=st-imp.log
. . skipping table "FWDEFECTCOMPONENT_PN21"
. . skipping table "FWDEFECTCOMPONENT_PN22"
. . skipping table "FWDEFECTCOMPONENT_PN23"
. . skipping table "FWDEFECTCOMPONENT_PN24"
. . skipping table "FWDEFECTCOMPONENT_PN25"
. . skipping table "FWDEFECTCOMPONENT_PN26"
. . skipping table "FWEQPATTRIBUTE"
. . skipping table "FWEQPATTRIBUTEHISTORY"
IMP-00009: abnormal end of export file
Import terminated successfully with warnings.
Have you ever experienced the following error message when you imported the db..?
Also I could see the import was not done successfully when I compared my ddlfileold.sql which is already done using this same dump file
My actions to make ddlfile
- I have tried three times to make ddlfile but I failed all and met the same error message.
try 1 : using 9210 version
try 2 : using 9206 version
try 3 : using 9206 version at other machine.
I need your advice and help.
Thanks,
Riaz.

This means the export dump file is corrupted.
In UNIX see this command to see whether the dump file is complete
$ tail expdat.dmp
It should have EXIT in the last line.

Help Me Abt - IMP-00009: abnormal end of export file

when i try to import from dmp files the following error occured.
IMP-00009: abnormal end of export file
i don;'t know , why.
please help me.
Asif Iqbal
Software Engineer ( Karachi, Pakistan ).

Also, please make ensure you FTP the dump file in binary mode and compare the file sizes before and after the transfer.
Edited by: SKU on 12-Jan-2009 12:32

IMP-00009: abnormal end of export file

When I try to import my dump file i receive this error IMP-00009: abnormal end of export file even if my buffer is set to 2000000000.
Any help would be great.
Regards

The export file is probably from an aborted Export session. Better retry the export and then import it again, if possible.
If not possible, report this as an Import bug and submit the export file that caused this error to Oracle Support Services.
Thanks and Best Regards,
-aijaz

Import utility IMP-00009: abnormal end of export file.

IMP-00009: abnormal end of export file.
I have received a 34 GB dmp file exported using exp utility 9.2. and i am importing it into 10.2.0.1.0
1) Not sure wheher its exported from Unix or windows.. how to make out?
2)I imported using ...BIN>imp user1/pwd FILE=C:\exp.dmp
SHOW=y fromuser=user2 touser=user1 ROWS=Y IGNORE=y GRANTS=y Constraints=
y log=C:\exp.log
Note my login user and my to user are same and i have grant DBA to user1.
3)When i import, after an hour+ it terminates saying abruprt end of export file.
4)I am not aware of the command used for export whether its FULL DB or only user etc.... how to find out? from show = y i selected 1 username and used it as from user.
5)This file was sent to me through a FTP server from where i downloaded.
Plz help i need to import urgently, what should i be doing?

I also read that FULL=Y is not supported when i import 9i dmp into 10g dmp. Is it true?False
It is an export of the Backup it seems. What difference does it make if we export from DB Backup and export from DB itself?There is nothing called export of a backup.The dump is created by an oracle binary called EXPORT.
You can execute this command against an oracle database
exp username/pwd@hoststring file=c:\oracle\bk\test.dmp fully=y....and so on

Abnormal end of export file

Hi!
During an import, Oracle generates the following error:
Abnormal end of export file ...
Is any way or hint to fix the end of file ??
TIA
Angel Castro

Hi Angel
In that case passed 2 possible things:
1.- The transfer to the tape or from the tape ot disk was not in binary mode
2.- The export utility did not finish succesful the exportation when somebody was doing that activity.
Joel PÃ©rez
http://www.oracle.com/technology/experts

IMP-00009: abnormal end of export filekgepop: -Please help

Sir,
IMP-00009: abnormal end of export filekgepop: no error frame to pop to for error 21500
I am getting this error. IMP-00009 abnoramal end of export file.
Why this this is happening? What I have to do to avaoid this?
How can we avoid compilation errors for views and procedures during import?
Can any one please give a help
regards
Mathew

Sir,
The excact error is
IMP-00009: Abnormal end of export filekgepop:no error frame to pop to for error 21500
This his is the error message comming at the end od command window during the import.
Following is the end of IMPort log file
. . importing table "BRANCH" 1 rows imported
. . importing table "ERROR_DETAILS" 24 rows imported
. . importing table "INDEX_CONTENT_PROPERTIES" 43 rows imported
. . importing table "LABEL" 0 rows imported
. . importing table "LINKS" 0 rows imported
. . importing table "LOCKS" 0 rows imported
. . importing table "OBJECT" 27763 rows imported
. . importing table "PARENT_BINDING" 27643 rows imported
. . importing table "PERMISSIONS" 19 rows imported
. . importing table "PROPERTIES" 450312 rows imported
. . importing table "PUBLISH_CONTENT_PROPERTIES" 45 rows imported
. . importing table "PUBLISH_TYPES" 4 rows imported
. . importing table "URI" 27769 rows imported
. . importing table "VERSION" 27643 rows imported
. . importing table "VERSION_CONTENT"
After this the error
IMP-00009: Abnormal end of export filekgepop:no error frame to pop to for error 21500
is displayed in command window.
regards
Mathew

How do I stop Illustrator automatically adding numbers to file name when exporting with artboard?

I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time. Anyone knows how to fix this? Thanks.

This has been discussed a few times, and here is a summary of the usual solutions.
http://forums.adobe.com/message/2989508#2989508
What is it EXACTLY you are trying to do. Are you trying to export a single page from filename.ai and make it filename.psd, (without any number afterwards). In that case you could delete the extra artboards prior to export, and then you won't have to checked use artbaords as there is only one page. Otherwise I would plan ahead so your end result will be filename-01.jpg, filename-02.jpg, and then everytime you use export artbaords those names will replace.
I am happy with the function as is, and would prefer to have a serial number automatically after the name when checking use artboards. But sounds liek you and others desire more options and thte ability to turn off adding to the filename.

Black on End of Exports--No Reason for It

+I'm posting this as a new question because nearly a month has gone by and no answer to a previous question.+
Every export has minutes of extra black added to the end. THERE ARE NO CLIP FRAGMENTS IN THE TIMELINE. These sequences are created just for the exports, and have only a clip or two in them. Yes, I set in/out marks, also tried not setting them.
This seems to be a SOFTWARE BUG. Can APPLE address this??
Any other experiences with this?
Thank you!

Thank you for your responses. It's doing this in two different projects, on different computers! (My desktop and laptop--I have been running both simultaneously.)
But I will try your suggestions and respond again. (Why didn't I try trashing pref's before?.....)
These are huge files--P2, DVCPRO HD. Compressing to HDV24p. Don't know if that has anything to do with it.
Michelle

Adjust Region Length without adding silence?

Whenever I adjust a region's length either to the locator's or to the nearest bar, logic automatically adds a few ms of silence to both the beginning and end of the region. Is there a way to prevent this from happening? If not, than this feature is pretty much useless. Please help!

I am adjusting an audio file region using the command "adjust region length to locators" or adjust region length to neareset bar".
I have a four bar phrase whose tempo is slightly slower than my song's tempo. I want to time compress the phrase to match that of my song. I highlight a four bar section in the locators, move the region to start at the same bar as the locators, and then select adjust region length to locators. When I do this, the region becomes the length of the locators, however a couple ms of silence is added to both the beginning and end of the region.

Few users are unable to sign in after we added 2 more front end servers in existing pool?

Hello,
We have recently extended the Lync 2010 Enterprise pool with 2 Front end servers. Now we have totally 6 Front end servers.
After this change some users are unable to login. Error message: "Cannot loggin as server is temporarily unavailable"
Captured, client logs and received the following:
ms-diagnostics: 4004;reason="Credentials provided are not authorized to act as specified from URI";
We have the following security settings on the newly added front end servers:
Network security: Minimumsecurity for NTLM SSP Based clients - set to - Require 128-bit encryption
In other existing front end servers, it has been set to - No minimum.
Questions:
1. Is that the issue for signin failure?
2. Do we need to change this option to - No minimum in new servers and reboot it?
Please advise. MUCH THANKS.

Hello
Those clients running in Windows 7 OS. And the error is different:
"Cannot loggin as server is temporarily unavailable"
Thanks

Adding silence at at end on export

Similar Messages

Maybe you are looking for