Adding simple ALT Text to a photo

Is there some easy way of doing this? I have 30 photos or so
and I'm supose to add Alt Text to all the pictures, with the
peoples' names. The photos have a hot spot over them, so the photo
isn't actaully the button.

Check the font size in the options bar. If it's really small you won't see it.
Look in your layer's palette and insure your text is in a layer located above the photo in the stack.
You might also check your image's resolution in the Image Size dialog. I've seen a couple of posts where someone changes the resolution to 1 with resample turned off...then can't see the text because it's too small even when they have large numbers inserted in the font size box.

Similar Messages

Adding Simple Raw Text to I-procurement

Hi All
I am new to the forum & a non-Technical user.
I have a requirement to add simple raw text to an I-proc screen. I have succeeded in doing this, but it is a process of trial and error to find the right place to add the text. What is the correct method for working out where to add the text? Are there any documents that could help me - self learn?
TIA
Regards
Paul

What is the correct method for working out where to add the text?
Shouldn't this decision be based on the requirement as to where you want to place the text. What is the exact requirement? If its just some simple text for user, you can also consider the tip text component.[b]
--Shiv

Alt text of image tooltip not showing for some cases

Hello,
I have followed the following steps in adding the alt text of images. Adobe Acrobat X Pro * Add alternate text and supplementary information to tags
However, there is a weird case where the tooltip of the alt text is not shown on hover for a specific page (page 5 of the attached PDF)
http://s000.tinyupload.com/?file_id=63161349344665038065
Please advise if there is something wrong with the PDF that is causing Reader to not show the alt text for the images in that certain page. (and if the PDF should be fixed or is Reader the one that has a problem).
Thanks

RamaRao.G wrote:
I added a JInternalframe on south side of a JFrame.Well, that's plain wrong. JInternalFrame is meant to be added to a JDesktopPane.
I added mouse listeners to JFrame. In mouse release I am placing one image at mouse release x,y location by following statement.
g2.drawImage(bitmapImage, x, y, w , h, null)
Problem is when I do mouse release just near to JInternalFrame component which added south side of main Jframe.
showing some part of image on south panel for a sec and then going back. Directly It should to go back side JFrame .
It should not appear on JInternalFrame even for fraction of sec also.To get better help sooner, post a [_SSCCE_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
db

I'm adding text to a photo.. Trying to get an S to lay down

I'm adding text to a photo and can't get an S to lay down?

I'm guessing on what you are trying to do, to some extent, but see if this helps. Your photograph will have a horizon, and perspective. For instance, if there are any buildings in the image, lines drawn through the top and bottom edges of the building, and extended to the horizon, will always intersect at the same point. If you lay down some guides as shown in this illustration, and overlay some perspective lines with a 1 pixel line, then use the resulting box to Free transform the letter S to.
It is _much_ easier if you Rasterize the text layer, because that will cause the Free Transform bounding box and handles, to fit tightly around the text. Otherwise the bounding box will be larger than the text to include descenders and risers for the font used.
So with guides and guide lines in place, and the text rasterized, use Free Transform, and hold down the Ctrl (Cmd) key will dragging the corner handles to the intersect points.
In the illustration I have made a nice simple concentric perspective, but that probably won't be the case in your image. But if you use clues from the image, you will be able to work out its true perspective. In fact I rarely resort to using guides, and just do it by eye.
A little tip when doing this is to make the object a Smart Object before using Free Transform. The reason is if you decide to tweak the perspective and use FT a second time, with an SO layer the handles will still be in the corners. A normal layer will now have the FT handles square to the document edges, which makes it much more difficult to refine the shape.
BTW Thanks for asking a proper, interesting, question about using Photoshop, as opposed to the usual 'My dog has eaten my serial number' posts.

Adding Text over a Photo in a Movie

First, is this possible? Can I actually add credits over a photo added from IPhoto to a movie in IMovie 5?
I am having a problem adding a title (credits) over a photo I have added to the end of a movie. I unclick "over black" and type in the text to scroll over the photo, and when I try to drag the "T" onto the photo, a black clip appears, and the text goes over that. I look up, and the "over black" box is checked again. I did lengthen the time of the photo, but that hasn't made a difference.
The text has appeared over the wrong clip at times, too.
I'm sure I'm missing something somewhere. Help!

Another thing to consider if your photo is a still frame, not using KB effect:
If you are ok with the title appearing just a few seconds after the start of the photo, use the "Split video at playhead" to split the photo just where you want the title to begin, and place it there. Just be sure that the length of the photo clip and the title are the same. You can lengthen the photo clip after the split if you need to.
This is great to do if you have used a transition before the photo, because you don't have to delete the transition. I have split a photo that had transitions on either side, lengthened the middle photo clip and added a title to that. Worked great!

Adding alt text tags in InDesign (and Acrobat Pro)

I am having real difficulty adding alternative text tags. I created an INDD doc with rollover buttons linked to URLs firstly in InDesign CS4. I couldn't add alt text tags in CS4 so I then tried to add them in Acrobat X Pro but failed. Acrobat keeps wanting to class the PDF as a form. I then installed InDesign CS6 from the cloud and added alt text to the rollover buttons via object export options. However, these do not show when I export to PDF.
Can someone help me add alt text to my rollover buttons in my interactive PDF either in InDesign CS6 or in Acrobat Pro after I export it?

In InDesign CS6, you just need to add descriptions to buttons. This is done in the buttons and forms panel:
This is the alt text in Acrobat when you roll over the button:
Hope that helps!

Adding Text to a photo...Need help

I'm new to Adobe Photoshop Elements 7. I'm following the instructions for adding text to a photo, but I can't see what I'm typing. I can see the cursur, but nothing else. I can see the text in the Layer, but not on the photo. Please help.

Check the font size in the options bar. If it's really small you won't see it.
Look in your layer's palette and insure your text is in a layer located above the photo in the stack.
You might also check your image's resolution in the Image Size dialog. I've seen a couple of posts where someone changes the resolution to 1 with resample turned off...then can't see the text because it's too small even when they have large numbers inserted in the font size box.

I added alt text to an Indesign created graphic but it won't show in Acrobat

I created these little check boxes in InDesign, basically a stroked box with a copied-from-Illustrator check mark. The box and the check are grouped and anchored to the each paragraph where the item has been completed (checked). I made sure the content of the frames were designated as graphic and not text or unassigned. I then click on the group, open object export options and assign a alt text desription (using custom setting), such as "completed" or "previiously completed", which is a gray check mark. InDesign shows the alt text, but when I export to Acrobat the PDF does not display the alt text. It sees it as a graphic but will not show the alt text that I created in InDesign.
The only way I have found to fix this is to create the entire box and check in illustrator and import as "real" graphic. This is kinda of pain to reimport and reposition all the boxes, when InDesign has the ability to create these simple graphics.
Any clue as to why Acrobat will not show the alt tags?

Pretty annoying - I didn't "chose" to not show my settings....
you selected something other than "show all" in the popUp menu over the presets list

Adding Alt Text to Images

Hi
I would like to add Alt text to a number of images on my site.
I have been sucessful in achieving this by selecting either the image on the page or in the asset panel, right clicking and then going to Edit Image Properties.
However I have a number of pages which contain Image compositions initially created in Ilustrator then saved as flat jpeg or png images inserted using Fill into a Blank Composition Wigit. The images all have triggers on top.
All of this works well
However , I seem unable in any way, to by right clicking on the images either on the page in Design mode or by highlighting the file in the Asset panel to bring up the Edit Image Properties dialogue box for the images (as part of the wigit composition).
I get a dialogue box by right clicking but one that contains Paste /Select Same /Arrange /Lock etc
Is it not possible to Add Alt Text to such combined images in a wigit , Should anyAlt Text be added earlier in the Design , Fill or construction stage
Any pionters or help would be very welcome
Thank You

Hi
I didn't get any replies to my post, but think I may have been able to resolve my own question.
I had been using the Fill with Image option to accurately place the images in the Wigit. This process as I mentioned does not seem to allow one to access the Edit Image Properties dialoge properties window by right clicking the image.
However when I deleted the image as a Fill and use the Place feature to insert the combined image with the same X-Y co-ordinates (and did a liltte bit of work to get the Wigit triggers to the front) right clicking now seems to allow access the Edit Image Properties
Success - I think !
Thanks

Adding text to a photo

i'm currently trying to make a simple cd cover using iPhoto to add to itunes. Is there any way i could add text to a photo that i have in the iPhoto library?

The Preview method puts the text in a box with a yellow background. If that's not what you want, I suggest you look at a number of 3rd party image editor. The best, IMO, is Photoshop Elements for Mac. It not only can do text on photos, it can curve the text and do other advanced editing. Amazon.com often has deals on it for around $80.
There's also GraphicConverter and others. Go to VersionTracker.com and do a search for "image editor" to get a number of candidates.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Alt text for photos not appearing

Hi,
I tagged a large document in InDesign (because Acrobat Pro's feature is too unpredictable).
I assigned alt text to all the photos, but when I hover my cursor over them while viewing the
exported PDF, only some are showing up.
It turns out that large photos that I have on chapter divider pages are the only ones
not showing their alt text, even though they are set up in InDesign structure view the
same way as all other photos.
Can anyone think of a reason why this is happening? The only thing I can think of
that's different about them is that they originally are from a master page. But because
each photo is unique, they've already been disconnected from the original master page.
Thanks,
Jane

I just figured out that those photos had been set to a blending mode of Multiply
because an earlier iteration of the design used transparency. But to the eye, they
look like normal photos, so I didn't realize they were set to Multiply.
This solved the problem but it's not heartening news. What if my graphic legitimately
did have a blending mode set? What would my workaround be if I needed to set Alt Text
for those images?

In have added text to my photos on my mac. Is it possible to transfer that text to the same photos on my iPad which I then display on my TV using Apple TV.

I have added text to my photos on my iMac. Is it possible to transfer this text to my iPad so that I can view the photos with text on my TV using Apple TV.

How did you add the text to the photo in the first place?
OT

How do you open a picture that has had text added using software such as Windows Photo Gallery?

How do you open a picture that has had text added using software such as Windows Photo Gallery?

In Editor, go to File menu>open, and point to where the photo file is on disk.

Adding Text to Your Photo

I am trying to add text onto my photo but can not find the function. Is this allowable?

And Martin S has come up with a way to do this using iPhoto as a work around - see http://simnet.is/klipklap/iphoto/adding-text/
Hi Larry, I was following your step by step guide for adding text to iphoto.
Sorry - as I said Martin S developed and posted this workflow - I only reported it - I personally have never used it - I do know that some others have used it successfully
Also any of the photo editors on the web page I referenced in my original post will add text
LN

Adding text to a photo in iPhoto 08

New to Mac and iPhoto and while laying out a birth announcmnet I wanted to add text on top f the phots to places the Apple card templates didn't allow. Is there a way to add text to a photo in iPhoto? Thanks.
Message was edited by: sdenby

sdenby:
Welcome to the Apple Discussions. You can't with iPhoto. You'll need a 3rd party editor like Photoshop Elements for Mac which can add text in a variety of ways and do advanced editing. PSE is the consumer version of the pro Photoshop and has about 80% of it's capabilities at 1/7 the price. There are other editors available that can do the job. Go to VersionTracker.com and search for image editor. You'll get a number of possibilities.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Adding simple ALT Text to a photo

Similar Messages

Maybe you are looking for