Adding some new fields for display in SAP Query

I need to add some fields for display in SAP query 01 of infoset /SAPQUERY/AM01. So I have changed the infoset by checking the additional fields which is already in LDB. Then I created the query by copying the 01 of infoset /SAPQUERY/AM01 to Zusergroup with reference to the same infoset. In the newly created query, I am just checking the newly added field in Basic list. If I generate the program for this query, I get a error.
Pls let me know how should I rectify this.
Regards,
Jeyananth

Hi,
Before generating the query, adjust the query from the menu of SQ01
Thanks
Shiva

Similar Messages

Modification for ME5xN Transactions - New Field for display on ALV

Hello Experts,
I have added a field ( ZDOC_ATTACHED) to structure CI_EBANMEM. This field is meant to indicate that documents from DMS are attached to the PO requisition line item. I would like this field to be available for display on the item overview ALV, but after days of DEBUG, I cannot find how to make this field appear on the ALV. Can anyone offer a suggestion ?
Thanks in advance for any insight/help
Larry Parsons

If I remember correctly, you should use the BAdI ME_PROCESS_REQ_CUST.
The BAdI has a sample code but it is not very good. There is a very similar BAdI for purchase orders called ME_PROCESS_PO_CUST and it's sample code is much better if you need help in implementing the BAdI for the requisition.

Add 2 new fields to an existing ABAP query in a particular position

Hello,
I have added 2 new fields to an existing ABAP query. These have been successfully added and the query is also executing.
But these 2 new fields are displaying at last. I need to add these fields in a particular column position.
Also I need to change the heading of these 2 new fields.
I tried to do so from the basic list, layout design from SQ01.
But I could not.... whatever I do.. the 2 new fields are displayed at the end of the list...
Please help me

Hi Andreas,
Do you mean that I should create a complete new abap query?
Is there no way to add some new fields at a particular position to an existing abap query?

CRM PCUI (Imp): Adding new fields & Webpage display in ODC1

Hi Gurus,
Plz help in these PCUI related configurations:
Query 1.
PCUI: Adding custom created field in a new TAB (BSP Iview)
Steps Done
a. Custom field defined in an object (say Opportunity)
b. An event created.
c. A Group Tab Page created
d. A Field group created and a new field name added to the field group (What structure need to be added to this field group?)
e. Entry made in Application Layout for an application i.e. event / position / screen element / tab page / structure. (Again what structure to be added?)
To handle this new field & tab, plz advice
1. What needs to be entered in the screen structure? Do we need to create this structure?
2. The required the model access class defined for the screen structure.
3. Any changes required in the controllers
(Where is the linking between custom field defined in the opportunity object and the new field entry made in the filed group)
Query 2.
Calling a webpage in a tab (ODC1, Detail area)
Opening a webpage in an iview can be done easily by reating a URL iview.
If the requirement is to open a web page in ODC1, than what are the steps required for the same?
e.g. On clicking a user defined tab the webpage should open in the detail area 1.
Query 3.
We have extended an object (say field addition in opportunity header) through EEWB
Will the added filed be available in PCUI screen also?
Regards,
SAURABH

Hello SAURABH,
welcome to the SDN Community. Please do not crosspost:
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=66550&messageID=707519">CRM PCUI (Imp): Adding new fields & Webpage display in ODC1</a>.
Regards
Gregor

Adding a new field to the Address Data for a business partner

Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
Yusuf

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

SAP Work Manager customization - adding a new field to equipment details screen (Syclo Agentry)

Hi Experts,
I am trying to add a field (NAME1) on the Equipment details screen under work orders in work manager 5.3 application.
I have performed the following steps, but I am getting an error while connecting to the application.
1) Create extension for Equipment class to add a new field.
2) added the new field (Name1) as the property to the standard object Equipment.
3) Added the field on the screen.
4) Added the field (name1) to the complex table ctEquipment.
5) Added the JAR file to Agentry.ini file.
6) Changed the Class mapping for parameter "Equipment" under group "SAPOBJECT" to point it to the custom (Extended) class.
7) Changed the class mapping for complex table parameter "ctEquipment" under group "CT_SAPOBJECT" to point it to the custom class.
8) after publishing the changes and re-starting the server, I get following error.
the log file generated (message.log) also has the same description.
What am I missing here? Any help would be really appreciated.

Hi Emanuel,
Thanks for looking into this issue.
I have performed the following steps as suggested by you, still it doesn't seem to work and gives the same error.
Below are the changes done on the ECC Side.
1) Copied the standard equipment class /SYCLO_CL_PM_EQUIPMENT1_DO to custom class ZSYCLO_CL_PM_EQUIPMENT1_DO. Changes made in the GET Method to get custom equipment related data
2) Modified the standard equipment structure /SYCLO/PM_EQUI_STR by adding one custom field
3) Configured this custom class as the object handler in the equipment mobile data object
4) Configured this custom class as the object handler for the equipment complex table
5) We are still using the standard BAPI Wrapper itself for getting the equipment data and the added field is reflected in the BAPI Wrapper table parameter
Is there something we are missing?

I have added a new field in IT0006 ,Now when try to create a new record for

Hi Experts,
I have added a new field in IT0006 ,Now when try to create a new record for a employee.
1,If I give the SUBTY in the PA30 screen getting an error "Don't Specify a subty error"
if and remove the subty and press CREATE button popup's comes and list the subty values.......It was allowing me to enter the subty in the PA30 screen prior to my new field addition in IT0006... is't a problem with the new field addition?
2, After I choose the subty value from the pop-up I am able to see the next screen....BUT GETTING AN INFORMATION MESSAGE THAT "Assignment to feature P0006 did not take place"?
3,, In the next screen after I have passed all mandatory fields while attempting SAVE I am getting an error called " Time constraint table in T777D is incorrect" what could be the cause?

How are u adding fields to table using append in se11 or pm01.
if you are adding fields using se11 delete it and add it0005 in transaction pm01 and generate object.
add fields to structure CI_XX_R0005 and generate screen and maintain entry and screen in maintance view add entry and activate program.

EEWB - In BP, adding a new field regenerates append structure

Hello,
After adding or deleting a field using EEWB, I have the following issues -
1. The new append structure that was created for BUT000 gets regenerated
2. Field labels get overwritten by field names
3. The order in which the fields were seen on the screen gets altered
Is this a known behavior of EEWB? How to alleviate this?
Thanks!

Thanks for your input Satish!
I searched using the application component suggested and the keyword and it was not very useful.
Some more details -
I created some new fields using EEWB. When you go to transaction BP, the standard tabs are displayed - ex - address, bank data, notes, etc. But now there is a new tab - Customer Data that has my custom fields on it.
In the backend, SAP has created an extend structure for table BUT000 that has these fields in it.
When I go to this extend structure, my fields are there with a ZZ prefix - Ex: ZZFIELD1, ZZFIELD2, etc. If you go to the details of these fields in data dict - transaction SE11, the Field labels - Short, Medium, Long and Heading are the same as the field names. Ex: in the first case, the four field labels will be - ZZFIELD1. I then changed the field labels to something meaningful - Ex: Renter name and rental date. After generating the structure, these labels are then displayed on the Customer data tab. So far so good.
However if I add a new field - ZZFIELD3, then all the label names that I had given (Ex: Renter name and rental date) get erased and replaced by the fieldnames again.
Also the order in which the fields were diplayed gets altered. Ex: earlier the Customer data screen was showing - ZZFIELD1, ZZFIELD2. Now it shows - ZZFIELD3, ZZFIELD2, ZZFIELD1.
I hope I have explained this issue.

IDOC Segment Adding a new field

Hi all!
My disclaimer: I know less than nothing about IDOCs. So hopefully I lead you down the right path. I have searched SDN and then tried google. As far as I can tell I've gone thru the right steps. But since it isn't working I must have skipped a step.
Here's what I've done:
1. Changed the segment via WE31. I had to cancel the activation. So I activated it again. It did generate a change request.
2. Updated the custom function module. Hard coded a value into that field just to see if it would work.
Tested it by running the invoice transaction. I see the IDOC with all the fields except for the one I added.
Next:
1. Cancel the activation on WE31.
2. Cancel the activation for the Object via WE30.
3. Activate the segment via WE31.
4. Activate the object via WE30.
5. Verify the structure was correct via SE11.
All looked good, I tested again. Again the IDOC was generated with all the fields except for the one I added.
I've since tried some other things. That do not really make a lot of sense, but I tried them. Does anyone know what I'm missing? How do I get the new field to display on my IDOC?
(I've also checked the partner profile via WE20 and verified the message type and object...)
Thank you!
Michelle

1. you have to activate WE30/WE31
2. you have to maintain your IDoc & extension in the WE20 outbound parameters.
3. you have to create a CMOD Project to activate your customer Exit for Incoice IDocs
4. you have to fill the new z-field with relevant value in the Function Module "assigned in CMOD".
if all steps are done. Put a breakpoint in the module to see that the z-field is filled.
Regards,
Gordon

Enhancement Adding a new field to a infotype

We are implementing E-Recruiting and trying to a new field to a existing infotype 5107. On the E-Recruiting page there are three frield that already exist. Country, State and City these field also in infotype 5107 too. Country and State both are dropdown box. I have to set the default value for Country to 'USA' and State to 'AZ' where can i set this? The new field will display location "county" which the user will be able to select multiple locations. I know i would have to go PM01 to add the new field to the infotype 5107. But i'm missing the third that will allow me to do this. There's IT, IT Version, IT (i don't have this on my SAP Gui). I'm not sure what to do next after I created this new field. how can put this new field this the E-recruiting webpage?

Matthew,
You can enhance your infotype 5107 from tcode 'PPCI' not 'PM01'.
Check out this Custom Infotype Creation in ORG Management
Regards,
Ahmad

Adding a new field to a Z table

We have a Z table on which we have created a datasource. We have created a virtual cube on this datasource and queries are built on this cube. This setup is present on Dev, Quality and Prod environment.
Now we have added a new field to the Z table in Dev. We will be creating a new Infoobject for this new field and will be adding it in the Virtual Infoprovider and also in the queries.
1. Do we need to replicate the datasource so that newly added field is visible to the datasource? If no, is there any way?
2. When I have to transport this to Quality and Prod, do I have to capture all the components and objects (Table,Datasoure,Virtual Cube Queries)? If no, what should I capture in the transport request?

Hi,
First, you have to regenerate the datasource in order to add the field:
1) Log on to source system (where Z table is stored) and go to transaction RSA6.
2) Select the root node and click Expand (icon with '+' sign).
3) Search for your datasource (you can use the binoculars icon).
4) Click on Change.
5) Verify that the field appears on the list. Make sure that "Hide field" and "Field only known on client exit" options are not marked for this field.
6) Click on Save.
7) Select "Datasource" -> "Generate" (CTRL+S) menu option.
8) Use RSA3 transaction in order to verify the new field appears on test extractions.
Then, to replicate the datasource in BI:
1) Log on to SAP BI and go to RSA1 transaction.
2) Go to "Modeling" -> "DataSources" section.
3) Search for your datasource and right click on it. Select "Replicate metadata" from context menu.
4) Add the new InfoObject to the VirtualProvider.
5) Update the transformation which joins the DataSource to the VirtualProvider.
As far as transport requests are concerned, even though it requires more work, it is a good practice to group objects in different transport requests according to their type:
In the source System (R3 for instance):
1) One transport request with the table.
2) One transport request with the datasource and its structure.
In BI:
1) One transport order with the datasource replica.
2) One transport order with the new InfoObject(s).
3) One transport order with the modified VirtualProvider.
4) One transport order with the modified transformations from the datasource towards the VirtualProvider.
5) One transport order with the Queries and their elements.
I hope this helps you.
Regards,
Maximiliano

Adding a new field to the selection screen of a LDB

Hi all,
I want to add a new field Clearing date(BSEG-AUGDT) in the dynamic selection screen of the report RFUMSV00.
For adding a new field i have copied the SAP view of a Logical database to CUS view.
Next i had added the Clearing date(BSEG-AUGDT) to the function group Document header(01) and selected the check box Preselect and saved the view.
But still i am not able to find the newly added field in the dynamic selection screen of the report.
Please suggest me where i am going wrong or how to do this.
Thanks in advance
Ajay

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Adding a new Field in OFR

Hi,
Is there a documentation available which can help in adding a new field in OFR.
What should be kept in mind doing that etc..
Anything would be helpful.
-shashwat

Hi Vikrant,
I was going through the Oracle KB and found some info for adding a new filed @ 'How to Configure a Custom Field to Assign Meta-Data Value Using Part of Original Document File Name [ID 1258984.1'
Is this different ?
Regards
Shashwat

New field not displaying in ALV

Hi all,
I have worked with ALV before, but currently I'm facing the problem of adding a new field to the ALV but it was not display on the screen. I have checked the fieldcatalog table and internal table right before the call of GRID-> SET_TABLE_FOR_FIRST_DISPLAY. All seems to be fine at this moment. Just that the new field was not displayed on the screen. Any idea?

Hello Mil
If you are using the old-fashioned ALV you will find several push-buttons for changing the ALV layout.
If you are using OO-based ALV then you will have a single push-button in the ALV toolbar with dropdown menu to select the specific function.
In any case, choose function "Change layout...". Usually you will get a popup with two lists of fields:
- on the left side you see the currently displayed fields in the ALV list
- on the right side you see fields that can additionally displayed
For sure you will find your missing field there.
Regards
Uwe

Error while adding a new field to the Segment in we31

Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharani

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Adding some new fields for display in SAP Query

Similar Messages

Maybe you are looking for