Adding "sound drops" while recording my podcast

Hello! I am recording a podcast using Audition CS6, and I want to basically play sound drops during the show. How do I do this? Is there something within Audition that will add sound during a recording, or do I use another program to accomplish that?
Thanks for any help.

By "sound drops" do you mean things like sound effects and musical stings? If so, Audition is primarily a post production tool so it'd be dead easy to do this while editing and mixing but not really possible live within Audition. I know there are specific podcasting tools that allow this but it's not something I do so I can't recommend any.
....or, a trick I've used quite often, there are various programmes that allow you to instant random playback from either another computer or from a smart phone. If your audio interface can handle this, do it like this works very well and makes you feel almost like a broadcast studio.

Similar Messages

Monitoring Sound Out While Recording

Does anyone know what would be the correct settings in Logic Pro for monitoring the sound output while recording a guitar? In Garage Band, all you have to do is turn on monitoring and you can hear the throughput. I used to be able to do it in an old version (4.8) of Logic. Since I upgraded to Logic 7, I have not been able to hear the "real time" guitar while I record. Any help would be greatly appreciated. (By the way, I am using an iMic to connect to the USB input . I'm using a G5 (2.7ghz dual proc) PowerMac.

Mark - Thanks for your reply. Yes, I've tried experimenting with that all night long. I can see that it affects the output meter in the track mixer, but still no sound. When I select the iMic input , the sound does not route through to the physical line out on the G5. I can open up Garage Band and then go back to Logic and then hear the output. The problem with this setup is then after I record a track, you can't hear the output of what you just recorded without first going in and selecting the "built-in audio" setting of the audio options (changing from the iMic setting). I never had this problem with the ancient version (4.8) of Logic I used on my old iBook.
Thanks again for your reply.
Jack

Sound crackling while recording (X-FI TITANIUM)

Hi. I previously posted a problem with sound recording with the X-Fi Titanium (PCI, non-Fatalty)? on this forum. I thought the problem was fixed, but in reality it was just not noticeable. Now that I am trying to record in-game footage, it's nearly unbearable. Every few seconds, a crackle or pop sound of varying volume and length comes into the recording. There's no problem with the output of the card whatsoever; in fact, when I'm recording the in-game audio, I don't hear a thing as it occurs. It's only during playback that this happens. What could be causing this problem? I'm up to date on all drivers, I think (6.0..347, according to my Control Panel)
I'm running Windows XP 32-bit on a P5E motherboard with an X38 chipset, an Intel Core 2 Duo E6750 at 2.67 GHz with 2 GB of ram, and an nVidia 250 GTS. I am not overclocking, and I am running on default fan speeds. I've heard of crackling and popping problems on 64-bit operating systems, but never on 32. I've run out of things to try, so I am now turning to the community to help. Any suggestions?
EDIT: I just remembered that I have an onboard soundcard on my motherboard that was deactivated when I installed the new one into my computer. Could that be causing the problem?
EDIT 2: I wanted to clarify one thing. The crackling sound is loud, but it lasts from a second to three seconds then goes away for fi've seconds or so, and then comes back. It isn't constant or muted - it even goes louder than the volume by which I'm currently recording. I've never read about this problem, and every other topic seems to refer to a constant crackling.
EDIT 3: I used Audacity to record an example of the problem I'm getting. I don't hear any of this when I play the song; only when I listen to it back. It's the Prelude from the Final Fantasy series (pardon the nerdiness). It skips to halfway through about fi've seconds in to get to a louder part, to better demonstrate the problem. And no, you aren't getting Skype messages, I was just receiving them while recording "What U Hear" with Audacity. I hope this hel
ps.
http://www.tindeck.com/listen/xkje

Same thing here... X-Fi Titanium Fatalty Champion, P5E3 Deluxe (x38)..using Windows XP SP3
check it out ftp://ftp.int3.ru/X-Fi_Recording_Sample.rar

Sound drops while playing DVD

Hopefully I can describe this issue accurately enough for some assistance.
My MacMini is connected to a TV via DVI and a 3.5 audio connection. Recently, when watching DVDs through Front Row, I have been noticing audio dropout during loud scenes in movies. The sound does not go out totally it just reduces, almost like it looses stereo, then jumps back up to normal volume when the scene background noise decreases or stops.
I've also noticed that sometimes the sound is not perfectly synched with the video image, this is rare though and is so slight you can barley notice sometimes.
Any idea why this might be happening? Is there anything I can do with my system configuration to help this?

I'm sorry no-one has been able to help you. I'd say that was rare, but looking back at some of the other threads you've started I can see why you might conclude that Apple Discussions isn't much help!
While I can't help you directly because this is not a problem that is familiar to me, I use a Mac mini (older G4 model) to play TV content (Real media files) on a TV, and Front Row to access and play a ripped DVD library. I don't experience either sound dropout or audio-sync issues you describe, but it does make me wonder what type of files you're playing, and how (without going into details since discussion of ripping methodologies isn't allowed here) the DVD content is put on your system for replay. In other words, my first suspicion would be whether something in the ripping process is causing these problems.
Given that I can't offer a similar experience I realize this isn't all that helpful, but perhaps that might get the ball rolling - with luck!

I am using logic to record a podcast and using soundboard to use as a playback for music and sound effects. I'd like to soft patch sound board into logic, and still use my interface for recording audio from the other members of the podcast.

I am using logic to record a podcast. I have a presonus firestudio mobile for my interface so I can record several people at the same time. I'm also using Soundboard for a playback system for music and sound effects. I'd like to know how to soft patch Soundboard into Logic while still using the Firestudio interface to record the other members of the podcast. Does anyone know how to do this? and if so can you tell me how to do it? Thanks.

Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

HELP!! No sound while recording thrugh M-Audio firewire 410

I am using Logic express 7 with an M-Audio firewire 410. I have my guitar plugged into the mbox and Logic is picking up the signal from my guitar, but I cannot monitor the sound while recording OR hear anything else at all. When I unplug the mbox, however, I can hear everything that i just recorded along with everything else in the song fine. I just need some help figuring out how to monitor the sound, PLEASE!!!!

Logic always uses the same audio interface for input AND output, so I suppose your problem is that you do not have any speakers connected to you M-Audio interface. Try adding a pair of speakers to it. If there's still no sound, go to Logic's audio settings and see if "software monitoring" is active or not.
Björn

While recording videos in iPhone 5, I am not getting sound playback.

While recording videos in iPhone 5, I am not getting sound while playing it. How to resolve this issue? Please help. Thank you.

Hi manu1982,
Welcome to Apple Support Communities.
It sounds like your iPhone has a no sound from the speaker issue. The article linked below provides a lot of great troubleshooting tips that may be able to resolve the issue.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
I hope this helps.
-Jason

I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Advise.

I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Please Advise.

How can anyone advise on such a cryptic post, all we can do is guess.
Which version of Logic, what audio hardware are you using?
Have you read the manual?

Creative Zen V + recording: no feedback of sound while record

hi,?i am trying?to record with mic input in my creative zen V +. but while recording, i can not hear the sound of what is recording. is there any solution to get a sound feedback in that mode ?Message Edited by loorent on 08-26-200709:25 AM

kthirumal wrote:
Thanks. But please explain me whether i will have to spend something to change / replace the product.
I don't know. I'm nothing to do with Creative. You'd need to contact their customer support people for India:
http://in.creative.com/support/contact/

Podcast conversion painfully slow; can't add chapters while recording?

I'm finding GB3's conversion to m4a very, very slow.
For the last six months, I was using GB2 to mix my audio, iTunes to convert to m4a, and PodcastAV to add chapters and pictures. The mixdown process takes the same amount of time (10 minutes for an hour long podcast), but GB3 takes over half an hour to convert the audio to 64 kbps audio! In comparison, the equivalent iTunes takes three or four minutes to do the same. Is GarageBand not using the Velocity Engine?
Additionally, if I make any changes to the chapter info in GB3, I have to go through this painful 40+ minute process once again. Tools like PodcastAV and ChapterToolMe can take existing m4a files and simply pass it through unchanged, only modifying the chapter info. Is there a way around this?
Also, is there a way to add podcast chapters while recording? When recording, I can't select the podcast track to the "add chapter" button...
Gotta say I'm disappointed so far.
17" powerbook (1.67) Mac OS X (10.4.4)

OK, i have played a bit more with Iphoto and GarageBand. It is really the size of the pictures. The original size of my pictures is 2048x1536px. If i make the pictures much smaller, i can add them from the mediabrowser into the podcast.
What i now don't understand, why does it work if i drag them from the finder into garageband without editing the size? And what dimenson should the fotos have for optimal performance in the cast?

Sound while recording with audigy 2 zs plati

i have the audigy 2 zs platinum. i'm using the /4" line in 2/mic in 2 to plug my guitar into. i can hear the guitar fine until i hit the record button on my software. it records what i'm playing, and will play it back with sound, but, again, no sound while recording. i also noticed there's no "li've" sound during playback. i've checked connections, and installed the latest drivers for the card. i'm using adobe audition 2.0 to record. please help!

Sure. Selecting "Line 2" records the signal just after it has entered the main CL chip, and selecting "What you hear" records the signal after it has been through the mixer/effects DSP in that chip. It's likely that CL lowers the volume a notch to reduce the chance of clipping from mixing/effects processing. Note that the signals at that point are 32-bit, so that some additional headroom really doesn't lose you anything; all you need to do is to raise the recording volume a bit to compensate.
The card's unity settings are designed for 50% on the recording slider and 00% elsewhere (i.e. there is a 2x digital multiplier on the recording slider). You may get some useful insights from a page I have: <a href=http://pages.sbcglobal.net/hamakerd/sbsrc/ target=_blank>http://pages.sbcglobal.net/hamakerd/sbsrc/[/url] by following the Additional Information link at the bottom, and seeing my comments (under the General heading) about how I determined the recording volume settings I used in that testing.
-Dave
[email protected] Edited by dwh on 04-07-2005 04:57 PM

No sound while recording or viewing satalite

;( could someone please explain to me why i have no sound while recording or playing back recorded tv.i have g4 mx440 video card and tuner card.i'm not sure if i am hooking up connections properly in back of comp.need help.thank you ?(

In order to hear sound as you record, you either need to use direct monitoring on your interface (ie, route it's inputs directly to its output), or turn Software Monitoring ON in Logic (Logic -> Preferences -> Audio Hardware & Drivers) - this lets you hear your inputs while recording.

Encore 1 HD (ch. 850) loses sound while recording

Several times last week I tried to record programs on Encore 1 HD (channel 850). Five minutes into the program, the sound dropped out. And it did not come back until after the recording stopped, or sometimes after a reboot.
No other channel is similarly affected.
I have two receivers connected to my STB. One uses the HDMI interface and the other uses the three Component jacks and the two RCA-style stereo sound jacks. The sound fails across the board.
The only way I can record the content is not to do anything else with the box. At night is a good time. Otherwise I have to shut off both receivers so there's no confusion. Now once I have something recorded from Encore 1 HD, I can play it back without a problem. I've tested it.
Has Encore implemented some kind of encryption algorithm to limit the serving of their content to more than one simultaneous receiver?
Encore 1 SD, Encore 2, Encore 1 West, and other (SD) Encore channels are not similarly affected. Neither is any other HD channel.

I have noticed this on Encore HD and the 4 Starz HD channels on my non-dvr 7100-P2 box.
Seems to happen with older movies (which is why you see it more on Encore) which have 2.0 audio.
The station ads/promos before the movie are 5.1 audio, and the audio drops out on the STB when the format switches to 2.0.
Happens every time.
The audio doesn't return until you switch away and then back to the channel. Very irritating. No idea if it does the same thing on a DVR.

I'm having trouble recording a bass to go along with a recording I dropped into GB. I'm using an interface and I can hear the bass line, I've clicked on the 'record' button, but the sound does not record. What am I missing?

I have the bass connected to my imac with an interface.
I can hear the bass and I've clicked on the 'record' button, but the sound does not record.
Am I missing something ?
Please advise.
Mike

Double check all your audio settings.
System Preferences --> Sound --> Input should be set to your audio interface.
GB --> Preferences --> Audio/MIDI --> Input should be set to your audio interface.
With your track selected, open the Track Info pane, and select the Edit tab. Under input make sure that Mono 1 or 2 is selected (which number will depend on which input you plugged your bass cable into).

Stereo Audio Record problem (While recording video as well)

Hi,
I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
Any solution?
Thanks.

@uliwooly This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4 then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp. Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not the typical "sony" thing to carry on.

Adding "sound drops" while recording my podcast

Similar Messages

Maybe you are looking for