Adding Standard Infotype fields to Custom Infotype

Hi,
I have a Requirement where I've created a Custom Infotype. Now, client needs to add Standard KOSTL and Email Address fileds to it. Whenever, someone tries to create / change this Custom Infotype for any Employee, the Pernr's KOSTL and Email Address should get populated automatically as in Standard Infotypes 0001 and 0105.
Please guide me, how to achieve this functionality.
Regards,
Hems.

Hi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems.

Similar Messages

Adding few new fields to Custom infotype already developed

Hi
I have a requirement to add new fields to already available custom infotype. I have to edit the PS structure and add few fields there and activate it. My question is, when I tick on "Generate Objects" after maintaining the PS structure, it will show pop up boxes asking whether to overwrite those objects already exists, shall I tick it or exit? Because the code is already written in the module pool for some validations,if I regenerate the objects, will the complete code will be erased?
Please guide me in this regard.
Thanks,
Pallavi.

Hi,
Yes you need to regenerate objects, for changes to reflect.
Since the objects are regenrated, the custom validation codes should get overwritten.
To be on safe side, you can copy this infotype to a dummy infotype and regenerate the code and check.

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

Showing fields of Custom infotype in standard infotype screen

Hi Experts
I have created a custom infotype 9xxx. Now when I go to the PA30 maintenance screen for a standard infotype 0795, i should also see the fields from custom infotype 9xxx. Can you please let me know how I can enhance the standard infotype 0795, since SAP does not allow me to change it directly.
Thanks
Neo

Hi,
I'm gonna be an *ss and ask why you wanna see the fields of your 9xxx - infotype in SAP IT0795.
If this is for information purposes, I believe this should be incorporated in reporting and not within master data infotypes.
Wilfred.

Adding field from Custom Infotype in Screen Header-PA30

Hi all,
Can we add the fields from custom infotype to the screen header in PA30? When I tried through Change Screen Modifications, I could not see the custom infotype in the Infotype column, so I could not select the required field.
Please guide.
Thanks in advance.

Hi,
When you take a drop down from the infotype column, you will see a window with infotypes. By default, it is restricted to 500 entries. To change that, click on the narrow bar under u201Crestrictionsu201D (has a downward arrow) and change the maximum number of hits to 999. You will then get all the infotypes including the custom ones.
Hope this helps.
Donnie

Description for value help field for custom infotype field

Hi,
I`ve got to include a field in custom infotype. This field has got a value help attached to it. The values to be displayed in the value help are stored in the domain of the field(in the dictionary).
The requirement is that once I select a value from the F4 help, the description for that value should be fetched and be dispalyed on the screen.
I`m using the FM "<b>AM_READ_TEXT_ON_DOMAIN_VALUE</b>" to read the description from the domain ,but unable to make it display it on the screen.
Can anyone suggest me as what should I do for displaying the description in the custom infotype screen.
Regards,
Farhana

Hi anji,
While using the "GET_DOMAIN_VALUES", I do get all the values from the domain. But I want only description to be displayed when I select a Value for that field.Kindly help out..
Eg:
1-Individual
2-Family
Then the description should be displayed as Family when I select the value 2 from the value help.
Regards,
Farhana.

Adding Fields to Custom Infotype Using Custom Infoset in SAP QUERY

Hi All,
We have a requirement to add fileds to a custom infotype for querying Custom Infoset in SAP Query.
We are facing problem as the added field is not getting displayed in the Query set so that we can select and display it in the Basic List along with the other filds.
Kindly suggest a solution.
Full points will be rewarded.
Thanks in Advance
Kumar

Hi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems.

How to add fields in custom infotype and update its screens

Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

Add new loop field in custom infotype - error field .. not assigned to loop

Hi,
I have a task of adding a new loop field in a custom infotype screen 3000. Here, in the past there have only been the fields begin date and end date. I need to add a new field, so this is how I proceeeded:
1) I modified the screen 3000 in SE38, adding the field where I wanted and defining a loop.
Now, I get the syntax error : Field P9500-field is not assigned to a LOOP. LOOP...ENDLOOP must appear in PBO and PAI.
There must be something wrong in what I'm doing, can you please let me know a quick fix on this or how I can accomplish this in PM01? Please keep in mind that this is a custom infotype for SAP TEM, I can't see it in PA.
Best regards,
George

Not a nice solution but I had to do this quick and I'll correct it in the next days:
The old flow logic PBO code was:
LOOP.
    MODULE FILL_DYNPRO.
ENDLOOP.
If I wanted to insert here something like:
FIELD whatever
    MODULE dummy.
, I'd get stupid error messages like this other field is not in loop, endloop, then if I put that other field I'd get the error that the fields are in the same loop...
Wanting just to get this over with, I added the following code (after the initial loop):
LOOP.
    FIELD whatever
      MODULE FILL_DYNPRO."same module as above
ENDLOOP.
This was repeated in PAI.
This pretty much works out fine for the moment, I'll look for finer solutions in the week to come.
Thanks for the help, guys.
Best regards,
George

Hiding table fields in custom infotype

HI guyz,
i have created a custom infotype which has 2 subtypes . certain fields should not be displayed when we select the subtypes. i have used the code below. the screen contains a table.
MODULE hide_FIELDS OUTPUT.
IF p9555-subty = '1'.
LOOP AT SCREEN.
IF screen-group2 = 'ABC'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF p9555-subty = '2'.
LOOP AT SCREEN.
IF screen-group2 = 'XYZ'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. " hide_FIELDS OUTPUT
the fields which are not in the table are not getting displayed as required but the fields in the table still appear on the screen(they are grayed out). i do not want them to appear on the screen. can anyone help me with this. Thanks in advance.

Hi Madhu Reddy , instead of using screen-invisible = '1' , u can try this .
MODULE sereen_modify OUTPUT.
DATA: COL TYPE CXTAB_COLUMN.
LOOP AT TC-COLS into COL.      " TC is ur Table Control
IF col-screen-group1 EQ '007'.     " Modification group1 is say 007.Also u can add other              checks like pnnnn-subty = 1 here .
   col-invisible = '1'.
   col-screen-output = '0'.
   modify TC-COLS from COL index COL-INDEX.
     ENDIF.
ENDLOOP.
ENDMODULE.                           " Call this module in ur Flow Loic PBO.
*Reward Points If Helpful

Enhancement Adding a new field to a infotype

We are implementing E-Recruiting and trying to a new field to a existing infotype 5107. On the E-Recruiting page there are three frield that already exist. Country, State and City these field also in infotype 5107 too. Country and State both are dropdown box. I have to set the default value for Country to 'USA' and State to 'AZ' where can i set this? The new field will display location "county" which the user will be able to select multiple locations. I know i would have to go PM01 to add the new field to the infotype 5107. But i'm missing the third that will allow me to do this. There's IT, IT Version, IT (i don't have this on my SAP Gui). I'm not sure what to do next after I created this new field. how can put this new field this the E-recruiting webpage?

Matthew,
You can enhance your infotype 5107 from tcode 'PPCI' not 'PM01'.
Check out this Custom Infotype Creation in ORG Management
Regards,
Ahmad

Module pool F4-Help problem for a field in custom Infotype(HR).

Dear Gurus,
I have created a custom Infotype and fields are like
P9015-NAM01.
P9015-NAM02.
P9015-NAM03.
all are fields for name.
I want F4 help for these fields with values same as Family Members-First name given in 21 Infotype .
for all 3 fields same f4 help values.
But when i see in the screen for first field the values are populating as selected but for second field the selected value is not picking..
DATA: BEGIN OF it_val1 OCCURS 7,
    nam01 LIKE p9015-nam01,
    rel01 LIKE p9015-rel01,
   END OF it_val1.
SELECT * FROM t591s INTO TABLE it_t591s WHERE
     sprsl = 'EN' AND
     infty = '0021'.
*SUBTY
*STEXT
SELECT * FROM pa0021 INTO wa_21 WHERE pernr = p9015-pernr .
    READ TABLE it_t591s WITH KEY subty = wa_21-famsa.
    it_val1-rel01 = it_t591s-stext.
   CONCATENATE wa_21-favor wa_21-fanam INTO it_val-nname SEPARATED BY space.
    it_val1-nam01 = wa_21-favor.
    APPEND it_val1.
    CLEAR : it_val1, it_t591s.
ENDSELECT.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      retfield               = 'NAM01'
    PVALKEY                = ' '
     dynpprog               = sy-cprog
     dynpnr                 = sy-dynnr
    dynprofield            = 'P9015-NAM01'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     value_org              = 'S'
     multiple_choice        = ' '
     display                = 'F'
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      value_tab              = it_val1[]
     field_tab              = t_fields[]
     return_tab             = t_return[]
     DYNPFLD_MAPPING        = t_DYNPFLD_MAPPING
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
In the same way i am calling for P9015-NAM02. & P9015-NAM03.
Is there any wrong in calling this FM...kindly help.....

Write the FM inside,
at selection-screen on value-request for <nam1>.
It seems that you are calling the funtion module for only first field. Repeat it for other two fields also-
at selection-screen on value-request for <nam2>
call FM.
at selection-screen on value-request for <nam3>
call FM.
Sumit

Different dropdowns for different fields in custom infotype

Hi All,
I created a new infotype in HR and for the different fields, I need different dropdowns.
Example: Infotype 9XXX
field 1          -   dropdown values (A,B,C)
field 2          -   dropdown values (D,E,F)
field 3          -   dropdown values (A,D,F)
Right now, I am getting the values for the dropdown based on a custom search help.
The table used in the search help is a custom table, which has all the possible values A,B,C,D,E,F.
Is there a way I can have different dropdowns for the different fields in the infotype?
Or is there is a way I can set different default values in the search help dynamically based on the field in the infotype.
Is using a search help exit a solution? If so please let me know how i can use it and what code needs to go in it.
Your inputs are greatly appreciated.
Thanks!
Sandeep

Hi All,
I created a new infotype in HR and for the different fields, I need different dropdowns.
Example: Infotype 9XXX
field 1          -   dropdown values (A,B,C)
field 2          -   dropdown values (D,E,F)
field 3          -   dropdown values (A,D,F)
Right now, I am getting the values for the dropdown based on a custom search help.
The table used in the search help is a custom table, which has all the possible values A,B,C,D,E,F.
Is there a way I can have different dropdowns for the different fields in the infotype?
Or is there is a way I can set different default values in the search help dynamically based on the field in the infotype.
Is using a search help exit a solution? If so please let me know how i can use it and what code needs to go in it.
Your inputs are greatly appreciated.
Thanks!
Sandeep

Adding radio button on a custom infotype!!

hi
how do u add a radio button on a custom infotype?
thx
gunjan

hi
how do u add a radio button on a custom infotype?
thx
gunjan

EHP5 ESS - Add Additional fields from custom infotype on Personal Data

Hi Gurus
I am able to launch the Personal Information screen under Personal Profile
I will need to add more fields on the Personal Profile --> Personal Data section
I have added the infotype in V_T7XSSPERSUBTY
I am not sure if I will need to do some configuration GenIL Model Editor
Is BADI (Enh. Imp) HRESS_PER_CONFIG_KEY relevant to adding fields to the screen?
Please guide how to go about doing this
Thanks in advance

for adding a infotype and fields you need to do this
1. Customizing the Fields in Overview Screens
http://help.sap.com/erp2005_ehp_05/helpdata/en/77/804c18e1844944b7f8baf5
3159be78/content.htm
2. Configuration of Personal Profile Services
http://help.sap.com/erp2005_ehp_05/helpdata/en/3a/fe6eac579d4a9ead651d77
9a2dbd23/content.htm
3. Personal Profile application Documentation
http://help.sap.com/erp2005_ehp_05/helpdata/en/14/60cd56b1514ae5aa811d2a
a4a59de3/content.htm
In EhP5 ESS Personal Profile application, in order to change the
Address overview page fields, you need to adapt the Address component
configuration HRESS_CC_PER_OVR_ADDRESS_XX.
Note: In EhP5, ESS screens are based on Floor Plan Manager for
WebDynpro ABAP Generic UI Building Block concept. To configure
overview page fields we no longer use 'Determine Fields for Business
Card on Area Page' View instead of that we adapt the FPM configurations.
In the standard delivery in the Overview Page, always international
Address is displayed and in the edit screen based on the country
selection (Foreign Address scenario), corresponding country screens
are displayed.
Note: We always show international address screen in overview page in
order to support Foreign Address scenario.
If you want to chanage the fields in the Address overview page fields
then adapt the Address component configuration.

Adding Standard Infotype fields to Custom Infotype

Similar Messages

Maybe you are looking for