Adding Systems to Transport Domain Controller

Hi,
We got copy version of Production system in our test box, I have to configure TMS by deleting production systems , have to include test systems in TMS Systems Overview. What else I have to do to setup TMS in test box? have to update DOMAIN.PFL file ? if any one have step by step procedure with screen shots or any detail oss notes please tell me the links.
Thanks in advance
Regards
Srinivas

Hi F C,
you can delete the TMS configuration
goto>STMS(T-code)>system overview>Extras>Delete TMS Configuration
regards,
kanthi

Similar Messages

Include a system in two different Transport Domain Controller

Hi folks,
I s it possible to configure a system in two different transport Domain Controller?
The two domain controllers will be in the same /usr/sap/trans file system.
thanks,
Má

Hello Má
Firstly to include system in the transport domain you need to have systems sharing common transport directory. Which you confirmed is the case.
Now when you try to change the Transport Domain of the system to make it part of another system it will overwrite current configuration.
Hence you wont be able to make one system part of two Domains.
There is no workaround available best of my infomation.
Regards
DG

How to include virtual system in transport domain

Hi all,
I have my development and quality servers running on one instance.at the time of configuring STMS,i have made the transport domain and included both the systems.Also i have configured production system as the virtual system.Now i have installed the production system on a different host with a different transport directory and want to include this system in the transort domain.in a way the virtual system will be replaced.
How should i do it.
Regards
Praveen

Hi Praveen,
If you want to include a system in your existing transport domain, just login into the system, in T-code STMS you will get a POP UP choose other configuration ,it will ask for-:
System
Description
Target Host
System Number
Save the settings and wait for some time it will automatically added in your Transport Domain.
Reward Points if find it useful.
Thanks,
Prashant.

Transport Domain Controller delete

Hello,
I have created a new BI dev system and need to set up the transport connectionns.
I have deleted the TMS for the old BI dev and now try to set it up for the new BI dev.. I assume i first have to delete the setting that the old system is the Transport Domain Controller. How do I do this?
Thanks,
F C

Hi F C,
you can delete the TMS configuration
goto>STMS(T-code)>system overview>Extras>Delete TMS Configuration
regards,
kanthi

ChaRM - Support for 46C as Transport Domain Controller

Good day.
We are currently testing ChaRM with the Transport Domain Controller being on a 46C box. We are getting the following error when trying to create a Task List:
Function module "TMW_DISPLAY_TRANSPORT_ROUTES" not found.
Is the use of a TDC on 46C supported with ChaRM?
Thanks,
Charles.

Hey Charles,
CHARM can only be implemented on satellite Systems with SAP Version 4.6 C onwards and above...
However, even then domain controller needs to be on 4.7.. i.e it requires WAS 620 aplication server...
Therefore we can conclude that CHARM cannot be implemented with the satellite system you had mentioned above..
Please Reward for useful points...
Regards,
Anand

Question about adding Windows 2012 R2 Domain Controller, into a native Windows 2008 R2 single forest domain

I current have a two server domain, both Windows 2008 R2 and fully updated. The two servers are on subnet 10.0.1.0 /24
- Windows 2008 R2 Server A: 10.0.1.1 (DC, GC, FSMO, DNS)
- Windows 2008 R2 Server B: 10.0.1.2 (DC, GC)
AD Domain: COMPANY.LOCAL
I have a second connected subnet, 192.168.1.0 /24) which is routed to the 10.0.1.0/24 subnet and I would like to install a Windows 2012 R2 server onto a server on that subnet and make it a domain controller with AD-Integrated DNS and DHCP for the 192.168.1.0
/24 subnet.
- Windows 2012 R2 Server C: 192.168.1.1
What are the proper progression steps, in order to bring up the Windows 2012 R2 server and then add it to my COMPANY.LOCAL domain and then promote it do a DC/GC/AD-Integrated DNS server? Are they anything like the following:
1. Install Windows 2012 R2 server (Server C)
2. Point Windows 2012 R2 server DNS servers at Server's A and B
3. Perform AD prep to extend AD schema to support Windows 2012 R2 domain controllers
4. Promote Windows 2012 R2 server to domain controller (install local DNS service on Server C, during this step)
* Question: Will Windows automatically create a DNS zone for the Windows 2012 R2 subnet (192.168.1.0/24) AND also include the DNS zone from the previous Windows 2008 R2 domain (10.0.1.0 /24)? Or will I need to add the 10.0.1.0 /24 zone to the DNS
server on Server C, even though the DNS from the Windows 2008 R2 domain is AD integrated?

Hi,
Regarding the issue here, please take a look into below articles:
System Requirements and Installation Information for Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn303418.aspx
Release Notes: Important Issues in Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn387077.aspx
Install a Replica Windows Server 2012 Domain Controller in an Existing Domain (Level 200)
http://technet.microsoft.com/en-us/library/jj574134.aspx
Here is an example for promoting Windows Server 2012 to a DC, see:
Step-by-Step Guide for Setting Up A Windows Server 2012 Domain Controller
http://social.technet.microsoft.com/wiki/contents/articles/12370.step-by-step-guide-for-setting-up-a-windows-server-2012-domain-controller.aspx
As the server is promoted to a DC, DNS Zones will be replicated and synchronized to it automatically whenever the new one is added to an AD DS domain, bascially there is no special need to add zones, for more information, please see:
Understanding Active Directory Domain Services Integration
http://technet.microsoft.com/en-us/library/cc726034.aspx
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Setting up a Solaris 10 system as a domain controller

Hello everyone,
I would like to set up my solaris 10 box as a domain controller, so my windows systems can recognize it as such in my lab.
Any ideas on how this could be easily done?

Edit /etc/sfw/smb.conf with the needed configuration [for a domain controller.|http://www.google.com/search?hl=en&q=setting+up+samba+as+a+domain+controller&aq=f&oq=&aqi=] . Make sure the services are active on boot (svcadm enable network/samba and svcadm enable network/wins ).

Questions About Adding First 2012 R2 domain controller to an existing 2008 Domain

Our current domain controllers are all running Server 2008 and are VMs in our local office. We plan to add a new domain controller and also create a new AD site. This new domain controller will be the only domain controller in the new remote
site. It will also be a VM on a new 2012 R2 Hyper-V server at the new remote site.
There is currently only one site (the default first site).
The steps planned are to create a new site to represent the remote location in AD configured with the subnets that apply to the remote site. (Computers in our local office should continue to use the domain controllers in our office and remote PCs should
start using the new domain controller.)
Then build the new domain controller VM, join to the domain as a member server and then promote it to domain controller of the new site.
Are any steps missing?
Do we need to do anything special with time sync settings on Hyper-V or will both the Hyper-V host and the domain controller guest just automatically sync time with the PDC domain controller across a WAN connection at the main site?
Is there a way to prepare the domain/schema for the new 2012 R2 domain controller in advance so that the new domain controller can be installed later without needing Schema Admin or Enterprise admin permissions during the installation?

> Where can I find what is correct for 2012 R2 domain controllers running
> on Hyper-V 2012 R2 hosts?
There's no "one fits all" advice on this topic, but I agree with Ahmed:
Within a domain, the DCs provide a hierarchical time source, and since
clients are required to be in sync with DCs, this is a "must be".
If your HV hosts are member of the domain they are hosting, things can
easily go crazy if you do not disable host time sync.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Adding new system in transport route

Hi,
I want to add new system in transport domain. Please advice me .
I have done through SE06--PERFORM POST INSTALLATION ACTIVITYS
but in STMS iam getting message as TMS configuration is not for this system.
Regards,
Asif
Edited by: Asif Ahamed on Nov 30, 2009 10:44 AM

Hi,
Take a look:
http://www.tamboly.com/ExpandTheTransportDomain.html
Regards
Mark

Setting up/adding system into STMS

Hi,
I have 2 BI systems with different sysid and sys #, installed on seperate machines.
One is BW3.5 and the other BI7.0 both configured initially as Single system in STMS. Now i want to create a connection between them. Meaning want to make BW3.5 as Dev and BI7.0 box as Test systems and be able to do transportation. How can i go about setting up this scenario , they are both on the same network subnet.
Your help would be appreciated.
Thanks.

Hi,
Steps to configure Transport Management System.
1. SE06.
Select the radio button ( Standard Installation).
and execute ( Perform-Post Installation Activities).
2. STMS
Click on Save.
The Developmnet system will then be configured as domain controller.
3. Add the Quality system to the Domain controller ( Development System).
To add ( In STMS (Dont click on save , click the button next to save )
Then Login to Development system and Approve the added system.
To Approve.
4. In STMS ....
Go with Overview --> systems.
a. Select the Qulaity system in the lIst below and
SAP System --> Approve.
b. Extras --> Distribute and Activate Configuration.
5. In STMS ....
Go with Overview --> transport routes
Configuration --> standard configuration --> Development and Production system.
Configuration --> Distribute and Activate.
6. In STMS ....
Go with Overview --> systems.
Extras --> Distribute and Activate Configuration.
Thanks,
Tanuj

Transport domain configuration error

Hi,
We have made a homogeneous system copy of our R/3 production system to create a test system.
The copy has the same SID as the source system and is installed as a local system rather than a domain - this is a Windows environment. The source system is the domain controller for the transport domain.
I have run SE06 in the copied system and am now trying to reconfigure STMS to set it up as a single system in it's own domain.
However, when I go into t/action STMS I am prompted to join the production domain - which I didn't expect, so I select Other configuration and enter appropriate values there but am getting error:-
Local TMS configuration is inconsistent in N3P
Message number XT 123
Can anybody advise how to resolve this?
Regards
Richard

1. Did you follow changing SID name and post database copy steps at database level first?
2. If you have done above, I hope you have deleted existing Transport configuration from SE06. If you haven't pls do.
3. Then, At transport domain controller, please remove this system ( if this system existed earlier)
4. Now, try joining domain.
It should work!
K

Same transport domain. different transport directory, possible?

Hi SAP folks,
A quick query, I work on multiple systems within a single SAP transport domain. Recently we have requirements to move 2 non-ABAP systems to a different transport directory while keeping the rest intact.
The reason for this is we are doing CTS+ for the 2 non-ABAP system and do not want to share the transport directories for the rest of the ABAP system.
Please advise if this can be done and how?
The following link for SAP suggested that it's possible but stop short of how to do it.
http://help.sap.com/saphelp_nw04/helpdata/en/c4/6045377b52253de10000009b38f889/content.htm
Anyone done similar setup? care to share?
Thank you.
Regards,
Jansen

Hi,
You can do this very well. First you should remove the two systems that you wanted to configure for CTS+ from your existing transport domain. To do this, login to your existing transport domain controller and delete the systems you wanted to remove from transport domain.
To perform this:
STMS --> Overview -> Systems -> < choose the system u want to delete> -> SAP Systems -> Delete. Confirm the deletion and save and activate the changes made to ur configuration.
And then add your Non-ABAP systems you wanted to configure for CTS+ using the domain controller you decided for CTS+.
I hope this help you to perform your action.
Best Regards,
Vasanth Govindaraj

Change Domain Controller

Hello Experts,
Currently we have DEV system as our domain controller with no backup domain controller, now we want to configure PRD as Domain controller & DEV as backup doamin controller.
I found that there are 2 ways of doing so:
1. Make PRD as BDC & activate it, then point TRANSDIR & DIR_TRANS to PRD trans directory
Issue: Domain name, group name & profile name will still be the same
2. Delete STMS configuration & reconfigure from start (PRD as DC & DEV as BDC). Set transport directory path in instance profiles
So we decide to go with approach 2 (delete & reconfigure everything).
Need your feedback on both the approaches.
Is there any way to take backup of all STMS configuration (or atleast Routes) & restore it.
Regards,
Rajneesh

Dear All,
We have successfully done the migration of Domain controller fron DEV (Standalone) to PRD (High availabiltiy). Few points to
remember:
1. No need to delete & create routes before / after the activity. It maintains the version.
2. need to run report TMS_MGR_LOADBALANCING after configure PRD as DC to make it high available.
Regards,
Rajneesh

DFSR Replication Event ID 1202 The DFS Replication service failed to contact domain controller Additional Information: Error: 160 (One or more arguments are not correct.)

Hi,
hummmm...
The client had 1 Server with AD and All Apps, IIS, Terminal Servers (30 device Cal), File Server, SQL2008R2 on it
Task: Install new AD server promote it to DC, bring in 2nd server, Replicate the File Server (DFSR) on these 2 servers, and demote it to standard server.
1) Old AD with name "Server" with OS-2008R2 SP1 and is a DC.
2) Brought in a new server "PrimaryAD", Installed 2008R2, done DC Promo, and added it as Additional Domain controller
3) Transferred roles from old server "Server" to "PrimaryAD"
4) Brought in a new File Server replicating server "Backup-Server"
5) Copied all the data from Server to Backup-server as DFS initial file sync with robocopy
6) here the problem started, after the copy finished, next morning the "Server" server crashed.....
7) thank god the data was backed up on Backup-server. but we didnt get the time to Demote the server "Server" and remove AD from it.
8) Since AD was replicated so "PrimaryAD" was are DC, brought 2nd Server "SecondaryDC" as additional domain controller.
9) we cleaned up the metadata and used ASIEDIT to clean the remaining stuff.
10) the "Server" server was formatted and renamed as "Primary-Server" and OS2008R2 SP1 was installed with rest of required apps
11) so now the PrimaryAD the DC, SecondaryAD the Additional Domain controller, Primary-Server the mail server and File server, the Backup-server, the replicated server.
Now configured DFS Replication from Primary-Server to Backup-server and receive following Event ID 1202
If i Configure DFS Replication as follows
PrimaryAD <<>> SecondaryAD -= Works... no errors...
PrimaryAD <<>> Backup-Server = Creates but Dosent works Event ID 5012, error The DFS Replication service failed to communicate with partner BACKUP-SERVER, Additional Information: Error: 9026 (The connection is invalid)
PrimaryAD <<>> Primary-Server = Dosent creates replication job just hangs,
on primaryad continious Eveni ID 10009, DCOM was unable to communicate with the computer "SERVER" using any of the configured protocols
......something on PrimaryAD is still trying to connect to old corrupt AD server "Server"
No errors with AD replication, SYSVOL & Netlogon shares also working fine and accessible.
DFS Diagnose report says
DNS name: backup-server.mydomain.com
Domain name: mydomain.COM
Reference domain controller: -- (HERE there is NO DOMAIN CONTROLLER mentioned)
IP address: 192.168.1.248,192.168.1.251,::1
Site: Default-First-Site-Name
Forgot to mention, gave full rights with ADSIEDIT to DFSR-LocalSettings for all server to Administrator and read permissions to "Authenticated Users"
DFSRDIAG POLLAD throws following error
c:\Dfsrdiag pollad /verbose
[INFO] Computer Name: BACKUP-SERVER
[INFO] Computer DNS: Backup-Server.mydomain.COM
[INFO] Domain Name: mydomain
[INFO] Domain DNS: mydomain.COM
[INFO] Site Name: Default-First-Site-Name
[INFO] Connected to WMI services on computer: Backup-Server.mydomain.COM
[INFO] Invoke PollDsNow() method on Backup-Server.mydomain.COM
[ERROR] PollDsNow method executed unsuccessfully. ReturnValue: 12 (0xc)
[ERROR] Failed to execute PollAD command Err: -2147217407 (0x80041001)
Can anyone point me to any direction which can lead to resolution of this ERROR and make DFS_R work..
Thanks
bikram

Hi,
It seems that DCPROMO did its work without complaints, still the DFSR references remained in AD. You could refer to the article below to clean up the DFS Replication object.
How to remove data in Active Directory after an unsuccessful domain controller demotion
http://support.microsoft.com/kb/216498
In additional, please refer to the following thread to troubleshoot the issue:
DFS is not working anymore.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CTS+ what is a best option for transport domain?

Hello Experts,
What is a best option to confugure CTS+ regarding the transport domains?
Should it be simpe and single transport domain at SOLMAN system and all satellite systems assigned to this single transport domain OR should I keep existing transport domains for satellite systems and connect them via domain link with SOLMAN?
Any ideas please?
Thanks!

hI,
Normally if you have non abap system in your landscape then you can have solman domain as both communication system and Transport domain, then maintain the TMS domain configuration in solman itself
If you want to maintain ABAP separated system as communication system then this case you have to create the domain link between communication system transport domain and the solamn domain
Chk this CHARM Configuration Problem
Thanks,
jansi

Adding Systems to Transport Domain Controller

Similar Messages

Maybe you are looking for